FCC ID: RNE02047TX WIRELESS CHARGING W. STATION

CANADA STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionne-

ment. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le ra 20

H.3.00.01.80A6004 YT80106A PANTONE COOL GRAY 3 CYT80106AABS/PMS-7532C H.1.4.01.80A60000 YT80106A ABS/PMS-7532C H.1.4.01.80A60001 YT80106A ABS/PMS BLACK 7C H.1.4.01.80A60002 YT80106A ABS/PMS BLACK 7C H.1.4.01.80A60003 YT80106A ABS/PMS-7532C H.1.4.01.80A60010 YT80106A ABS/PMS BLACK 7C H.1.5.03.80106000 YT80106A 132*91*0.2mmPET4C H.1.6.04.01000065

(50-60),,40*34*1mm,3M-9448A,PMS BLACK 7C H.3.00.01.80A6000 YT80106A PANTONE COOL GRAY 3 C (:YT80106A ABS/PMS 7532C H.1.4.01.80A60006 YT80106A ABS/PMS-7532C H.3.00.01.80A6001 YT80106A PANTONE COOL GRAY 3 C (:YT80106A ABS/PMS BLACK 7C) H.1.4.01.80A60007 YT80106A ABS/PMS BLACK 7C H.3.00.01.80A6002 YT80106A YT80106AABS/PMS-7532C H.1.4.01.80A60004 YT80106A ABS/PMS-7532C H.3.00.01.80A6003 YT80106A YT80106AABS/PMS-7532C H.1.4.01.80A60005 YT80106A ABS/PMS-7532C H.1.4.01.80A60009 YT80106A PC196.7*111.25*1mm H.1.6.04.04000025 8*2mm 32 2A PANTONE COOL GRAY 3 C PANTONE COOL GRAY 3 C 46.76 mm 3.55 mm 32.83 mm 6.68 mm PANTONE COOL GRAY 3 C PANTONE COOL GRAY 3 C 88.45 mm 33.83 mm 8.31 mm 2A YT80106A H.4.00.80A600000 H.4.00.80A600001 2.00 mm 2022/7/27

Chaney Instrument Co. Declaration of Authorization We Name: Chaney Instrument Co. Address: Unit No. 1, 9/F., Clifford Centre, No. 782 Cheung Sha Wan Road, City: Kowloon, Hong Kong State: N/A Country: China Declare that:

Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: WIRELESS CHARGING W. STATION Type designation: 02047, 02047M, 02047DI, 02047C Trademark: ACURITE FCC ID: RNE02047TX on our behalf. Date: 2022-09-14 City: Kowloon, Hong Kong Name: Victor Mak Function: Project Manager - Digital Products Signature: . Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<2022-09-13>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID RNE02047TX Model name 02047, 02047M, 02047DI, 02047C For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

(Signed) Name: Victor Mak Company: Chaney Instrument Co. Address: Unit No. 1, 9/F., Clifford Centre, No. 782 Cheung Sha Wan Road,Kowloon,Hong Kong. Phone: +852-35829826 Fax: +852-28890331 E-Mail: vmak@primexasia.com

Model Declaration Letter We, the undersigning company Company Name: Chaney Instrument Co. Address: Unit No. 1, 9/F., Clifford Centre, No. 782 Cheung Sha Wan Road, City: Kowloon, Hong Kong Country: China Hereby confirm that the following products:

Product description: WIRELESS CHARGING W. STATION Type designation: 02047, 02047M, 02047DI, 02047C Trademark: ACURITE That All versions of the Model 02047, 02047M, 02047DI and 02047C are electrically equal except the following difference:

Only differ in model name. Date: 2022-09-22 City: Kowloon, HK Name: Victor Mak Function: Project Manager - Digital Products Signature:

Product Declaration Letter Date: 2022-09-21 We, the undersigned company Company Name: Chaney Instrument Co. Address: Unit No. 1, 9/F., Clifford Centre, No. 782 Cheung Sha Wan Road,Kowloon,Hong Kong. Declare that:

Product description: WIRELESS CHARGING W. STATION Type designation: 02047, 02047M, 02047DI, 02047C Brand: ACURITE FCC ID: RNE02047TX This product complies with the following six items specified in KDB680106.

(1) Power transfer frequency is 115kHz~205kHz.

(2) Output power from primary coil is to 5 watts (MAX).

(3) The system consist of one source primary coils.

(4) Client device is placed directly in contact with the transmitter.

(5) Mobile exposure conditions only.

(6) The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ________________________ Name: Victor Mak Tel: +852-35829826