app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2011-06-01
|
1 2 3
|
2009-02-20
|
1 2 3
|
2009-02-11
|
1 2 3
|
Applicant's complete, legal business name |
ChargePoint, Inc.
|
1 2 3
|
FCC Registration Number (FRN) |
0018459099
|
1 2 3
|
Physical Address |
254 E. Hacienda Ave
|
1 2 3
|
Campbell, California 95008
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
b******@baclcorp.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
W38
|
1 2 3
|
Equipment Product Code |
17-001002-01
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
T******** P******
|
1 2 3
|
Title |
Senior Regulatory Engineer
|
1 2 3
|
Telephone Number |
408-8********
|
1 2 3
|
Fax Number |
408-8********
|
1 2 3
|
E-mail |
t******@chargepoint.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.15.4 Transceiver Module |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Does not apply |
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 | Change in identification of presently authorized equipment. Original FCC ID: TFB-APEXLT Grant Date: 07/05/2007 |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Class II Permissive Change for the purpose of co-location with other antenna or transmitters described in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
1 2 3 | Class II Permissive Change for the purpose of co-location with other intentional radiators in this filing. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
1 2 3 | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antennas listed in this filing or similar antennas with equal or lesser gain can be used with this module. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
Bay Area Compliance Laboratories Corp.
|
1 2 3
|
Bay Area Compliance Laboratory
|
1 2 3
|
Name |
K******** M****
|
1 2 3
|
J****** C******
|
1 2 3
|
Telephone Number |
408-7******** Extension:
|
1 2 3
|
408-7********
|
1 2 3
|
Fax Number |
408-7********
|
1 2 3
|
E-mail |
k******@baclcorp.com
|
1 2 3
|
b******@baclcorp.com
|
|