FCC ID: W38-60SIPT WIFI & BT Module

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5534559.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Label and Label Location Module Top View Model: SU60-2230C FCC ID: W38-60SIPT IC: 8854A-602230C

ChargePoint Inc. Model: CPNK-F Contains FCC ID: W38-201903EG25G, W38-60SIPT, W38-UICFG Contains IC: 8854A-201903EG25G, 8854A-602230C, 8854A-UICFG This device complies with Part 15 of the FCC rules. Operation is subject to the two conditions 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) Bottom View of Host Device

Agent Authorization Company: ChargePoint, Inc. Address: 254 E. Hacienda Ave, Campbell, CA 95008, USA Product Name: WIFI & BT Module Trade Mark: ChargePoint Model Number(s): SU60-2230C FCC ID: W38-60SIPT We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022-07-26 Signature:

Name:

Thanh Pham Title:

Senior Regulatory Engineer Company: ChargePoint, Inc.

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-07-26 Subject; Modular Transmitter Application Company name: ChargePoint, Inc. FCC ID: W38-60SIPT Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;-

FCC KDB 996369 D01 Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 Module Equip Auth Guide v02. FCC ID W38-60SIPT has been examined against the following requirements. Modular Approval Requirement

(i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements.

(ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation.

(iii) The modular transmitter must have its own power supply regulation.

(iv) The modular transmitter must comply with the antenna Yes No and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler

(at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section.

(v) The modular transmitter must be tested in a stand-alone configuration

(vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number.

(vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization.

(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Page 2/3 Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements;

Requirements of KDB 996369 D03 KDB Ref Sect 2.2 2.3 2.4 2.5 2.6 2.7 List of applicable FCC rules Summarize the specific operational use conditions Limited module procedures Trace antenna designs RF exposure considerations Antennas Reference User Manual Reference User Manual Reference User Manual Reference User Manual Reference User Manual Reference User Manual Page 3/3 2.8 2.9 2.10 Label and compliance information Information on test modes and additional testing requirements Additional testing, Part 15 Subpart B disclaimer Reference User Manual Reference User Manual Reference User Manual Name: Thanh Pham Date: 2022-07-26 Title: Senior Regulatory Engineer Signature of applicant:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-07-26 Subject; Request for Confidentiality FCC ID: W38-60SIPT To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Software Security Requirements For U-NII Devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Page 2/3 Signature:

Name: Thanh Pham Title: Senior Regulatory Engineer

July 26, 2022 Ref:

FCC Class II Permissive change for IC: 8854A-602230C Applicant: ChargePoint, Inc. Dear Examiner, This is to request a Class II Permissive change for IC: 8854A-602230C originally granted on 2021-12-28. The change under this application is to changing WIFI and Bluetooth module antenna and disabling DFS band by software. The original antennais the Dipole/PCB Dipole/PIFA/Isolated Magnetic Dipole antenna, and peak gain is 3.9dBi. For the new antenna, please refer below table. Type Gain Photo Ceramic Frequency 2.42.4835 / 5.155.85 GHz 2.4 / 5.7 dBi+/-1 dB (Peak) I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Signature:

Name: Thanh Pham Title: Senior Regulatory Engineer IC change request letter Rev1.0

FCC Software Configuration Control Declaration Date: 2022-07-26 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product Name: WIFI & BT Module Model Number: SU60-2230C Regarding FCC Country Code Selection guidelines identified in KDB 594280 D02 U-NII Device Security v01r03. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Thanh Pham Date: 2022-07-26 Title: Senior Regulatory Engineer Signature of applicant:

12/20/2021 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Description of Permissive Change Dear Sir/Madam, We, ChargePoint, Inc., hereby authorize Bay Area Compliance laboratory Corp to act as a laboratory for testing and test report generation for the following project(s):

FCC ID: W38-60SIPT, Model: SU60-2230C This project is a Permissive Change II submission for the purpose of changing the Wifi/BT module antenna used by the EUT, disabling DFS band and enabling co-location with RFID module (FCC ID: W38-UICFG, IC:

8854A-UICFG), and cell modem (FCC ID: W38-201903EG25G, IC: 8854A-201903EG25G) in the CPNK-F, Falcon, CP6000 and PL1000 as host. We affirm that between BACL and ChargePoint, Inc., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. This authorization is valid until further written notice from the applicant. Sincerely Yours, Thanh H Pham Staff Regulatory Engineering ChargePoint, Inc. 254 E.Hacienda Ave Campbell CA 95008-6901

2021-11-02 FCC Confidential Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: W38-60SIPT In accordance with Sections 0.457 and 0.459 of the Commissions Rules, ChargePoint, Inc. hereby requests short-term (180 days) confidential treatment of information accompanying this application as outlined below:

Test Set-up Photos EUT and Host Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Thanh H Pham Senior Regulatory Engineering ChargePoint, Inc. 254 E. Hacienda Ave, Campbell, CA 95008-6901

9/27/2021 Re: Change of Identification Authorization To Whom It May Concern:

This letter grants authorization for representatives of ChargePoint, Inc. to apply to the FCC for a change in identification as specified under 47CFR2.933 of the FCC rules. This authorization applies to Laird Connectivity, LLC, FCC ID: SQG-60SIPT. We are aware that ChargePoint, Inc. intends to market the above referenced product under their own FCC ID: W38-60SIPT Sincerely, Brian Petted / Technology Leader brian.petted@lairdconnect.com Laird Connectivity, LLC W66 N220 Commerce Court Cedarburg, WI 53012, United States QA-FR-183-A

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5534556.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case 9/16/2021 Subject: Request Change of Identification Dear Regulatory Authority, This Change of Identification request applies for a new FCC ID: W38-60SIPT as established in 47CFR2.933 (b) for a currently approved device. This application by ChargePoint, Inc. will establish a new FCC ID: W38-60SIPT under ChargePoint, Inc. grant code for purpose of marketing. The original grant to Laird Connectivity, LLC will remain in effect per 2.933(b). 1. The original identification is FCC ID: SQG-60SIPT 2. The original grant date is 08/11/2017 (DSS); 06/03/2020 (NII); 10/27/2020 (DTS) 3. The equipment is electrically identical, only the model name, product name, and FCC ID number are different. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are include in this application The following files are electronically submitted as attachments:

Authorization Letter from Original Grantee Change in ID Request Letter External Photos of New Application FCC ID Label Format and Location of New Application Sincerely, Thanh H Pham Staff Regulatory Engineering ChargePoint, Inc. 254 E.Hacienda Ave , Campbell CA 95008-690