FCC ID: 2AAQFQ8 SoundBot Bluetooth Speaker

Q8 Product Specification:

Main parameter:

Bluetooth version: V4.1 output power3W frequency response150hz-18khz drive2 power supplyUSB, DC 5V 500mA distortion1%

S / N 75dB battery capacity2000mAh/3.7V battery working time3-5 hours (play as the max Volume) battery charging time10 hours sizeL152 *w65 * h75mm N.W.390g Packing Contents:

1the quake blue-tooth speaker 2users manual 3USB charging cable 43.5mm stereo cable Charging the Speaker:

Before using the speaker for the first time, charging it for at least 4 hours. 1Plug the USB cable into the port on the speaker, plug the other end into the USB port on the adapter(DC 5V). 2Red LED will turn on to indicate that the unit is charging. 3Red LED will turn off when fully charged. Start-up& Shutdown Functions:

1Long press POWER to start the blue-tooth speaker. 2Blue LED flashes, waiting for pairing 3Long press POWER to shutdown the blue-tooth speaker. 4LED off if shutdown the speaker. Pairing the Device:

1Place the speaker near the Blue-tooth-enabled device. 2Long press POWER to start the blue-tooth speaker, blue LED flashes, the speaker is now in pairing mode.Follow the instructions of your device to search for the speaker. 2The speaker is called Q8, enter the PIN0000 if need. 3Blue LED light, the completion of the pairing, while the voice prompts. The speaker is in the state of pairing the last device default in the first 3 seconds after starting. If failing to pair, the speaker will be in state of pairing automatically. LED Indicator 1Charging: Red LED on 2Fully charged: Red LED off 3Pairing Mode: Blue LED flashes. 4Connected: Blue LED slow flashes 5Line IN Mode: Blue LED on 6Low battry: Red LED flashes Safety and General Information:

1Do not expose the device to water or attempt to disassemble the device. If the device is exposed to water or disassembled, the user may be risking an electronic short. 2Do not use this products in an aircraft or in hospital. 3Do not expose the device to direct sunlight, heat and flame. 4Device may be warm while charging. It is normal. 5Changes or modifications to this equipment not expressly approved by the party responsible for compliance could avoid the users authority to operate the equipment. Keys Sketch Map:

Functions:

1 Power Long press POWER to start or off. 2 VOL+

*Long press to skip to next track

*Quick press to increase volume 3Play/Pause, Phone answer,

*When playing music, press the button to pause or play.

*When you receive a call, press the button to answer. When the call ends, music will resume playing. 4VOL-

*Long press to skip to previous track

*Quick press to decrease volume 5LED Red/Blue 6Microphone 7Micro USB: Use a computer USB port/AC power adapter with USB 8RESET 93.5mm audio input (line-in) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be us ed in portable exposure condition without restriction.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AAQFQ8 Label and Location BLUETOOTH SPEAKER Model No.: Q8 FCC ID: 2AAQFQ8 Size: L2.0cm*W1.5cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

CHINA ELECTRONICS SHENZHEN COMPANY Agent Authorization Company: CHINA ELECTRONICS SHENZHEN COMPANY Address: 33F, ELECTRONICS SCIENCE AND TECHNOLOGY BUILDING, SHENNANZHONG ROAD, SHENZHEN, CHINA Product Name: BLUETOOTH SPEAKER Trade Mark: /

Model Number(s): Q8, Q801 FCC ID: 2AAQFQ8 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2019-12-25 Name:

Xuning XIE Title:

Certification Engineer Company: CHINA ELECTRONICS SHENZHEN COMPANY

Add: 33F, ELECTRONICS SCIENCE AND TECHNOLOGY BUILDING, SHENNANZHONG ROAD, CHINA ELECTRONICS SHENZHEN COMPANY SHENZHEN, CHINA Tel: 0755-83783780 Fax: 0755-83783961 Date: 2019-12-24 To: MiCOM Labs Inc 575 Boulder Court, Pleasanton, California 94566, USA Dear Sir/Madam, We, CHINA ELECTRONICS SHENZHEN COMPANY Hereby declares the following statement for MiCOM Labs Inc, PCB board, structure and internal of these model(s) are the same, Only model name and shell color is different for these models.. Product name: BLUETOOTH SPEAKER Trade Mark: /

Model No.: Q8, Q801 Sincerely, Clients name / title : Xuning XIE / Certification Engineer Address: 33F, ELECTRONICS SCIENCE AND TECHNOLOGY BUILDING, SHENNANZHONG ROAD, SHENZHEN, CHINA Tel: 0755-83783780 Fax: 0755-83783961 E-mail: fred@ceaudio.com.cn

CHINA ELECTRONICS SHENZHEN COMPANY Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019-12-25 Subject; Request for Confidentiality FCC ID: 2AAQFQ8 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Xuning XIE Title: Certification Engineer