all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Users Manual | Users Manual | 3.11 MiB | August 25 2020 | |||
1 2 3 4 |
|
Internal Photos | Internal Photos | 1.44 MiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
External Photos | External Photos | 406.22 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
ID Label/Location Info | ID Label/Location Info | 16.10 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
Attestation Statements | Attestation Statements | 45.25 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
Authorization letter | Cover Letter(s) | 27.02 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 | Block Diagram | Block Diagram | November 01 2023 | confidential | ||||
1 2 3 4 |
|
Class II Change Request Letter | Cover Letter(s) | 113.61 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
Confidentiality | Cover Letter(s) | 34.18 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 | Operational Description | Operational Description | November 01 2023 | confidential | ||||
1 2 3 4 |
|
RF Exposure Info. | RF Exposure Info | 366.10 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 | Schematics | Schematics | November 01 2023 | confidential | ||||
1 2 3 4 |
|
Test Report | Test Report | 1.37 MiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
Test Setup Photos | Test Setup Photos | 1.14 MiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
US Agent Letter | Attestation Statements | 41.98 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 |
|
Antenna Specification | Test Report | 382.17 KiB | November 01 2023 / November 02 2023 | |||
1 2 3 4 | Antenna Spec | Parts List/Tune Up Info | August 25 2020 | confidential | ||||
1 2 3 4 |
|
Confidentiality Request | Cover Letter(s) | 24.93 KiB | August 25 2020 | |||
1 2 3 4 |
|
MPE Prediction | RF Exposure Info | 322.58 KiB | August 25 2020 | |||
1 2 3 4 |
|
Test Report Part 1of3 | Test Report | 4.00 MiB | August 25 2020 | |||
1 2 3 4 |
|
Test Report Part 2of3 | Test Report | 3.98 MiB | August 25 2020 | |||
1 2 3 4 |
|
Test Report Part 3of3 | Test Report | 3.39 MiB | August 25 2020 |
1 2 3 4 | Users Manual | Users Manual | 3.11 MiB | August 25 2020 |
HSGW Series IP Alarm System User Manual June 2020 Table of Contents 1. INTRODUCTION _________________________________________________________________________ 1 1.1. SYSTEM SPECIFICATION _____________________________________________________________________ 2 2. PANEL INFORMATION ___________________________________________________________________ 5 2.1. IDENTIFYING THE PARTS: ____________________________________________________________________ 5 2.2. THE POWER SUPPLY: _______________________________________________________________________ 6 2.3. SYSTEM REQUIREMENTS: ____________________________________________________________________ 6 3. GETTING STARTED ______________________________________________________________________ 7 3.1. SYSTEM DEPLOYMENT ______________________________________________________________________ 7 3.2. HARDWARE INSTALLATION __________________________________________________________________ 7 3.3. SOFTWARE INSTALLATION __________________________________________________________________ 10 4. 5. CONNECTION TO PANEL WEBPAGE ______________________________________________________ 13 DEVICE MANAGEMENT _________________________________________________________________ 15 5.1. LEARNING ______________________________________________________________________________ 15 5.2. ADD RF DEVICE __________________________________________________________________________ 22 5.3. LEARN RULE ____________________________________________________________________________ 23 5.4. WALK TEST _____________________________________________________________________________ 25 5.5. EXCLUSION _____________________________________________________________________________ 26 5.6. Z-WAVE TOOL ___________________________________________________________________________ 27 5.7. PSS CONTROL ___________________________________________________________________________ 28 5.8. UPIC CONTROL __________________________________________________________________________ 29 5.9. SURVEILLANCE __________________________________________________________________________ 30 5.10. GROUP CONTROL ________________________________________________________________________ 31 5.11. SOUND/SIREN SETTING ___________________________________________________________________ 32 6. PROGRAM THE SYSTEM ________________________________________________________________ 36 6.1. PANEL CONDITION ________________________________________________________________________ 36 6.2. PANEL SETTINGS _________________________________________________________________________ 39 6.3. PIN CODE ______________________________________________________________________________ 43 7. NETWORK SETTINGS ___________________________________________________________________ 44 7.1. GSM (HSGW-MAX8 ONLY) ________________________________________________________________ 44 7.2. NETWORK ______________________________________________________________________________ 47 7.3. WIRELESS ______________________________________________________________________________ 48 7.4. UPNP __________________________________________________________________________________ 49 8. SYSTEM SETTINGS _____________________________________________________________________ 50 8.1. ADMINISTRATOR SETTING __________________________________________________________________ 50 8.2. HOME AUTOMATION ______________________________________________________________________ 51 8.3. SCENE _________________________________________________________________________________ 56 8.4. REPORTING _____________________________________________________________________________ 58 8.5. CODE SETTINGS __________________________________________________________________________ 61 8.6. SMTP SETTING __________________________________________________________________________ 63 8.7. MEDIA UPLOAD __________________________________________________________________________ 64 8.8. POLLING _______________________________________________________________________________ 65 8.9. XMPP _________________________________________________________________________________ 66 8.10. DATE & TIME ___________________________________________________________________________ 67 8.11. DYNAMIC DNS _________________________________________________________________________ 68 8.12. TEST IP _______________________________________________________________________________ 69 8.13. FIRMWARE UPGRADE _____________________________________________________________________ 70 8.14. RF FIRMWARE UPGRADE __________________________________________________________________ 71 8.15. FACTORY RESET _________________________________________________________________________ 72 8.16. BACKUP & RESTORE _____________________________________________________________________ 74 8.17. SYSTEM LOG ___________________________________________________________________________ 75 9. EVENT & HISTORY _____________________________________________________________________ 76 9.1. CAPTURED EVENTS _______________________________________________________________________ 76 9.2. REPORTED EVENTS _______________________________________________________________________ 77 9.3. EVENT LOG _____________________________________________________________________________ 78 9.4. DEVICE HISTORY _________________________________________________________________________ 79 10. APPENDIX _____________________________________________________________________________ 80 10.1. FAULT EVENT DESCRIPTION ________________________________________________________________ 80 10.2. CONTROL PANEL MODE AND RESPONSE TABLE _________________________________________________ 81 10.3. CROSS ZONE VERIFICATION ________________________________________________________________ 83 10.4. FIRE VERIFICATION ______________________________________________________________________ 83 10.5. CONTACT-ID PROTOCOL & FORMAT _________________________________________________________ 84 10.6. EVENT CODE ___________________________________________________________________________ 85 1. Introduction This section covers unpacking your IP Security System with HSGW Series IP Panel and Security Sensors. Refer to later chapters for information on setting up and configuring the system over the Web Page in more detail. The advanced IP Security System with fully integrated TCP/IP technology and Ethernet connectivity is able to take full advantage of new advances in IP Home Security and Home Automation and multi-path signalling. 1 1.1. System Specification Function Control Facilities Remote Keypad & Remote Controller Alarm Transmission Path Built-in Module: RF + RJ45 port (IP Connection) + 4G*
Report Destinations 20 Monitoring Stations or mobile number Arming Modes Away, Home 1, Home 2, Home 3 Alarm Type Burglar, Panic, Fire, Medical, Emergency, Water, Silent Supervision Programmable time frame for inactivity alert GSM Standards Compiles with CE & FCC standards. CPU, RAM CPU: i.MX 6ULL MCIMX6Y1DVM05AB NXP RAM: DDR3L SDRAM MT41K256M16TW (4Gbit) Flash Flash: NOR FLASH MT25QL256ABA 256Mbit and eMMC 4GBytes Specifications Electrical External AC adaptor Input: AC 100-240V, 50 / 60Hz, Output: DC 12V 1A Backup Battery 1600mAh, Ni-MH rechargeable battery pack Battery Recharge Time 72 hours Battery Backup Time 30 hours**
Current Drain AC Powered Approx. 126mA / 12V standby Battery Powered Approx. 44mA / 7.2V Suspend Wireless 2 RF (one of these three possibilities for different country) Frequency: 868MHz Modulation: FSK Antenna type: Monopole antenna Antenna gain: 1.75dBi Protocol: Climax Encryption: Private Encryption Method Frequency: 915MHz Modulation: FSK Antenna type: Monopole antenna Antenna gain: 1.75dBi Protocol: Climax Encryption: Private Encryption Method Frequency: 920MHz Modulation: FSK Antenna type: Monopole antenna Antenna gain: 1.75dBi Protocol: Climax Encryption: Private Encryption Method
(Quectel EC21-E) GSM: 900 / 1800MHz 4G* (one of these two WCDMA: B1 / B5 / B8 possibilities for different country) LTE: FDD: B1 / B3 / B5 / B7 / B8 / B20
(Quectel EC21-AU) GSM: 850 / 900 / 1800 / 1900MHz 3 WCDMA: B1 / B2 / B5 / B8 LTE: FDD: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B28, TDD: B40 Antenna Type Main: Monopole Aux: Dipole Protocol Climax Physical Properties Operating Temperature
-10C ~ 45C Operating Humidity 85% relative humidity @23C (non-condensing) Dimensions 150mm x 140mm x 42.3mm Weight 430g
*Note: 4G with fallback compatibility to 3G and 2G.
** Note: The actual battery life may vary with product settings, usage patterns and operating environment. 4 2. Panel Information 2.1. Identifying the parts:
1 LED 1 (Red/Green) Red LED ON Area 1 in exit delay of Full Arm Mode. Red LED Flash Area 1 in exit delay of Home 1/2/3 Mode. Green LED ON - System in the learning mode. Green LED Flash - System in the Walk Test mode. 2 LED 2 (Red/Green) Red LED ON Area 2 in exit delay of Full Arm mode Red LED Flash Area 2 in exit delay of Home 1/Home 2/Home 3 mode Green LED On System in the learning mode Green LED Flash System in the Walk Test mode Top Fixing Screw x 2 (for Version A only) 3 LED 3 (Red/Yellow) Red LED ON Alarm in memory. Red LED Flash Alarm Yellow LED ON system fault 4 5 Buzzer 6 Bottom Fixing Screw x 2 7 Micro SIM Card Compartment 8 USB Port 9 Learn/ResetButton 10 Ethernet Port (pre punched hole for Version B only) 11 Battery Switch (slide to ON to meet requirements of the applicable EN standard.) 12 DC Jack 13 Pre Punched Hole for Wiring (for Version A only) 5 14 Standing Base (for desktop deployment) 15 Tamper Switch 16 Wall Mounting Knockouts x 4 2.2. The Power Supply:
An AC power adapter is required to connect to a wall outlet. Be sure only to use an adapter with the appropriate AC voltage rating to prevent component damage. A DC 12V 1A switching power is used to power the Control Panel with 7.2V 1600mAh, Ni-mH rechargeable battery pack. Rechargeable Battery The Control Panel has rechargeable battery pack of 1600mAh. In addition to the adapter, there is a rechargeable battery inside the Control Panel, which serves as a backup in case of a power failure. During normal operation, the AC power adapter is used to supply power to the Control Panel and at the same time recharge the battery. Slide the Battery Switch to ON to activate and charge the battery. It takes approximately 72 hours to fully charge the battery The battery status information is displayed in the Panel section of local area webpage. 2.3. System Requirements:
The system requires a TCP/IP network environment for you to connect to the Control Panel for system programming. Hardware requirement for programming the panel vial Local Area Network (LAN) webpage:
Microsoft Windows 8 or Windows 10 operating system. Microsoft Internet Explorer 6.x, or later and Mozilla Firefox 3.0 compatible. CPU: Intel Pentium II 266MHz or above Memory: 32MB (64MB recommended) VGA resolution: 800x600 or above 6 3. Getting Started Read this section of the manual to learn how to set up your Control Panel and program System Settings over the Web page. 3.1. System Deployment Follow guidelines below when planning installation location:
The Control Panel requires Ethernet connection. The Control Panel should be installed at a location that is hidden from outside view. Avoid mounting the Control Panel near large metal objects which may affect wireless radio strength. The Control Panel should be protected by sensors so that no intruder can reach the Control Panel without first activating a sensor. When using ZigBee routers to improve ZigBee network coverage, remember to use only ZigBee Router with backup batteries for security sensors. If you use a Router without backup battery for security sensors, the Router will be powered down in case of AC failure, and you security sensors will lose connection with the ZigBee network. Home Automation devices (Power Switchesetc) do not have this limit and can be used with any Router. 3.2. Hardware Installation The panel can be either fixed on the wall or placed on deskop. Remove the bottom standing base to reveal the bottom cover fixing screw. (Figure 1) 1
(Case Version A for example) The panel casing is secured by 4 screws, 2 at top and 2 at bottom, remove the top 2 screws and loosen the bottom 2 screws. (Figure 2) 7 Figure 1 Figure 2 2 To remove the back cover, first lift the cover partially from the bottom, then push inward from the top to disconnect the back cover from panel main body. 3 Remove the 4 screws securing the internal cover. 4 Replace the internal cover for setup:
I. Connect Ethernet cable to panel Ethernet port. II. Insert a functional micro SIM Card into Micro SIM Card Compartment, the SIM Card PIN Code must be disabled first. III. Slide Battery Switch to ON position. IV. Plug in AC adaptor to power on the panel. 5 Wire the Ethernet and AC power cable, close the cover and choose to install the panel on desktop, or mount on the wall. When closing the cover, first attach the back cover to main body from the top, then close the cover from bottom. I. Replace the back cover, wire the cable through the side hole and tighten the 4 fixing Desktop:
screws. (figure 3) II. Replace the standing base. (figure 4) Figure 3 Figure 4 III. Put the panel at desired location to finish installation. 8 Wall Mounting:
I. Break through the 4 Wall Mounting Knockouts. II. Use the knockouts as template, mark mounting locations on the wall. III. Replace the panel onto the back cover and tighten the 4 fixing screws to complete installation. 9 3.3. Software Installation THIS INSTALLATION IS ONLY REQUIRED FOR FIRST TIME USER 1. RUNNING THE FINDER SOFTWARE The Finder software is required for your computer to identify the control panel on the LAN. Step 1. To download Finder software, open your browser and type below URL in the address bar: http://www.climax.com.tw/climax-download-finder.html. Step 2. After download, install the software and follow on-screen instructions to complete installation. Step 3. Follow on screen instruction to complete installation Step 4. Once complete, the Finder icon will be displayed on your desktop. 10 Step 5. Double click on the Finder.exe to start the software. Finder will automatically search for control panel on the LAN and display its information. If available, the panels LAN IP address, Firmware version and MAC address will be displayed Step 6. If the panel information is not displayed, check panel power and Ethernet connection and click on Search to update the panel information. 11 Step 7.
(Optional)You can choose to edit the panels network setting by clicking on the panel column, then click Configure Setting The LanType input of IP/Netmask/Gateawy/DNS setting. If you wish to configure these setting manually, change LanType to Static. to DHCP and does not require manual is default After finish changing network setting, enter the user name (default: admin) and password (default: cX+HsA*7F1) then click OK to confirm. The user name and password can be changed later in panel configuration webpage Step 8. Click the panel information column and click on Open Web Page, or double click on the panel column to link to the panel configuration webpage. Your default browser will start automatically to connect to the LAN IP displayed in Finder. 12 4. Connection to Panel Webpage For first time setup, webpage connection is only available within 1 hour after the panel is powered on; if the panel has been powered on for more than 1 hour. Webpage access will be disabled. Reboot the panel to enable webpage function again. Change default password after login to gain unrestricted webpage access. Step 1. Select the Control Panel in the Finder software and click on Open Webpage to connect to panel webpage. Alternatively, enter the Control Panel IP address displayed in Finder into your browsers address section and proceed. Step 2. Enter the User name & Password to proceed Default user name: admin Default password: cX+HsA*7F1
(If wrong user name and password are entered for 5 times, the local webpage login will be disabled for 5 minutes.) Step 3. You will enter change password page. Enter and repeat a new password (username change is optional), take care that both username and password are case sensitive. Click OK to confirm. Step 4. Upon confirming new username and password. You will enter panel Welcome page. The panel will prompt you to re login with new username and password. Step 5. You will enter panel Welcome page. The Control Panels information will be displayed. Click on the pages and folders on the left to access the Control Panels various functions 13 The Welcome page displays current control panel firmware version information according to different panel model and MAC address.
<IMPORTANT NOTE>
If the default login password is not changed, webpage access will be disabled 1 hour after power on. Reboot the panel and changed password to allow unrestricted webpage access. 14 5. Device Management The Device Management section allows you to learn in, edit, control and view all available accessory devices that can be included in the HSGW Control Panel. 5.1. Learning Use this function to add new devices into the Control Panel. HSGW supports up to 160 zones of accessory devices, in 2 areas, up to 80 zones each area. The following types of accessory devices are supported:
RF device: All Climax RF devices are supported. (For ZigBee only model, RF devices are ZigBee device: All ZigBee device with ZigBee Home Automation 1.2 profile are supported. not supported.)
<IMPORTANT NOTE>
The Control Panel built-in ZigBee module supports up to 40 ZigBee devices by itself. If you wish to include more than 40 ZigBee devices into the Control Panel, you must add extra ZigBee Routers into the Control Panels ZigBee network to increase the networks maximum device capacity. IP Cameras: The Control Panel is compatible with Climax VST-1818 Series IP Camera. Up to 6 IP Cameras are supported. Z-Wave Device: Available for Z-Wave modules only, other modules requires additional USB Z-Wave Dongle. 5.1.1. Add Sensor Step 1. Click on Learning to enter learn page. Step 2. Click on Start to enter learning mode. Step 3. Press the test or learn button on the each device or any button on the Remote Controller. (Please refer to each sensors user manual for test or learn button position).
<NOTE>
For ZigBee sensors, press and hold the learn button for 10~12 seconds to transmit a 15 learn code. For IP Camera VST-1818 Series, press and hold the Privacy button for 10 seconds. Step 4. When the system received the signal transmitted from device, the screen will display its information for selection.
<NOTE>
It takes 5-10 seconds for the Control Panel to receive a learn code from ZigBee or Z-Wave Sensor. Step 5. Click Add to include selected device into panel. If the sensor you wish to learn into already exists in the system, the sensor information will be displayed in the Learned Device section. If not, the sensor information will be displayed in the Detected Device section.
<NOTE>
For VST-862 F1 devices, press and hold the learn button for 3 seconds for the Control Panel to receive a learn code, and then click Add within 30 seconds. Step 6. If the device is successfully learnt into the system, the added device will be displayed in the Learned Device section. Step 7. Repeat Step 3~5 to learn in all device, click Stop to exit learn mode when complete. The system will automatically exit Learn mode if left idle for 5 minutes. 16 5.1.2. Local Learning Instead of learning devices via configuration webpage, you can also learn in devices by using the learn button located on the back of Control Panel. Step 1. Press and hold the Learn Button on the back of Control Panel for 10 seconds, release when the Control Panel emits one short beep. LED 1 Green will turn ON to indicate the Control Panel is now in learning mode Step 2. Press the test or learn button on each device to transmit signal, refer to device manual for detail. Step 3. When the Control Panel receives signal from device, it will emit 2 beeps to confirm. The device will be included in the panel automatically. Step 4. After finish learning all devices, press and holde the Learn button for 1 second. The Control Panel will emit 2 short beeps to indicate it has returned to normal mode. LED1 will dim.
<NOTE>
devices. Device learnt in via Local Learning will be assigned to Area 1 only, which is limited to 80 The Control Panel cannot enter learning mode when under Away Arm/Home Arm or Walk Test mode. The Control Panel will emit 5 beeps to indicate error. 5.1.3. Edit Devices After finish learning devices, proceed to edit the device setting. Step 1. Click Panel to enter Panel webpage. All learnt in devices will be displayed under Device List section. 17 Step 1. To edit the device setting or information, click Edit at end of device entry. Step 2. You will enter Device Edit webpage Step 3. Edit your device setting and information according to instruction below. Click OK to save your new changes when finished. Alternatively, click Default to reset all parameters to default values or click Reset to re-enter all the information. Name: Enter a name for the device. Area: Select the area which the device belongs to. Zone: Select the Device zone number. The attribute list determines panel behaviour when the panel receives trigger signal from Attribute List:
the device. There are General Attribute:
Permanentlyt Bypass This function allows user to permanently deactivate (bypass) the selected device. If bypassed, then the Control Panel will not respond at all when the sensor is 18 triggered. Latch report If bypassed, the system can be armed directly regardless the devices fault situation. However, its fault situation will still be monitored, logged and displayed in the webpage. This function ONLY applies to Remote Control or Door Contact with Set/Unset attribute enabled. Latch Report ON: When the device is used to change systm arm mode, the Control Panel will report the arm/disarm action by the particular device. Latch Report OFF: When the device is used to change systm arm mode, the Control Panel will not report the arm/disarm action by the particular device. Set/Unset 24HR This function is for Door Contact only. This function allows Door Contact to control system mode. Normal Close: The system will be armed when the Door Contact is opened, and disarmed when Door Contact is closed. Normal Open: The system will be armed when the Door Contact is closed, and disarmed when Door Contact is open. This function enables the device to activated selected alarm event whenever it is triggered regardless of system mode. System mode response will be disabled if 24HR attribute is enabled. System Mode Attributes:
The System Mode Attributes determines system behavior under particular arming mode when the sensor is triggered. No Response When a sensor with No Response is triggered, the Control Panel will not respond. Start Entry Delay 1/ Start Entry Delay 2 When the system is under Full Arm or Home Arm mode, if a sensor with Start Entry Delay 1/2 attribute is triggered, Control Panel will start an entry countdown period to give enough time to disarm the system. When the Control Panel is in the Disarm mode, if a sensor with Start Entry Delay 1/2 attribute is triggered, the Control Panel will immediately report a burglar interior alarm (CID code: 132). When the Control Panel is in the Full Arm mode, if a sensor with Start Entry Delay 1/2 attribute is triggered, the Entry Delay 1/2 timer starts counting down. If no correct pin code is entered during the entry delay timer to disarm the system, the Control Panel will report a burglar perimeter alarm (CID code:131) immediately after entry delay timer 1/2 expires. When the Control Panel is in the Home Arm 1/2/3 mode, if a sensor with Start Entry Delay 1/2 attribute is triggered, the Entry Delay 1/2 timer starts counting down. If no correct pin code is entered during the entry delay period to disam the system, the Control Panel will report a burglar interior alarm (CID code: 132) immediately after entry delay timer 1/2 expires. 19 Chime Burglar Follow When the system is in Arm/ Home Arm 1/ Home Arm 2/ Home Arm 3 mode, if a sensor set to Chime is triggered, the Control Panel will sound a Door Chime
(Ding-Dong Sound). When the system is in Full Arm or Home Arm mode mode, if a sensor set to Burglar Follow is triggered, the Control Panel will report a burglar alarm immediately. When a Start Entry sensor is triggered and the system is under Entry Delay Timer countdown, if a sensor set to Burglar Follow is triggered, the Control Panel will wait until the Entry Delay Timer expires before activating a burglar alarm. If the system is disarmed before the timer expires, the Control Panel will not activate alarm. When the system is under Full arm or Home Arm/ Disarm / Entry Time mode, if a sensor set to Burglar Instant is triggered, the Control Panel will report a burglar alarm immediately. When the system is in Full Arm or Home Arm / Disarm / / Entry Time mode, if a sensor set to Burglar Outdoor is triggered, the Control Panel will report a burglar outdoor event immediately. See 12.2 Appendix Cross Zone Verification for detail. Burglar Instant Burglar Outdoor Cross Zone Apply Scene This function is only avaiable for Remote Keypad and Remote Control. Select a Home Automation Scene number for a Remote Keypad or Remote Control button. When the button is pressed, the Control Panel will execute the actions programming in the Scene accordingly. For more information, please refer to 8.3. Scene. Home Automation Attributes:
The Home Automation Attributes allows a device to control Home Automation function. Trigger Response When the device is triggered, the Control Panel will activated selected Home Automation Scene number. Please refer to 8.3. Scene webpage for detail. When the device transmits restore signal after trigger, the Control Panel will activate selected Home Automation Scene number. Restore Response Other Attributes:
Permanent Bypass When checked, the panel will completely ignore all signal received from this device. A bypassed device will be unable to trigger any response, including alarm or fault from the Control Panel. All other attribute settings will be also be ignored. 20 Exit (No Response) If checked, the panel will ignore trigger signal from this sensor during Exit Time countdown. If deselected, the panel will activated burglar alarm and report immediately when the sensor triggered during Exit Delay Timer. A sensor set to 24HR attribute will ignore Disarm, Full Arm, Home are and Exit response setting. The panel will activate selected alarm when this sensor is triggered regardless of system mode under any time. 24HR
<NOTE>
Some devices have their own unique functions and will have its own attribute setting which is not listed in this section. Please refer to the device manual for its setting detail. 5.1.4. Delete Devices Step 1. To delete a sensor, click Delete under Device List Step 2. A message Delete success is displayed and the sensor you choose is deleted successfully. 5.1.5. Identify ZigBee Device The Identify function is available for ZigBee device only, it can be used to locate ZigBee devices after learning. For battery powered ZigBee devices, the identify fuction should be used within 1 minute after pressing device button, or 3 minute after learning in the device. Otherwise due to ZigBee network mechanisms, the device may not be able to receive signal successfullly from panel. AC powered ZigBee devices do not have such limits and you can use Identify function anytime. Step 1. Click Identify under the Device List after the device column entry. Step 2. If the ZigBee device receives signal successfully, the webpage will display a success message and the ZigBee device LED indicator will flash 10 times to confirm.
<NOTE>
If a timeout message is displayed on webpage, it means the device did not receive signal from Control Panel, please check ZigBee device range from panel and make sure to follow instruction above about Identifying battery powered ZigBee devices. 21 5.2. Add RF Device Besides learning, you can also add RF devices into the system by entering its RF code into the system with Add RF Device function. Step 1. Click Add RF Device. Step 2. Select Area and Zone number for the device you wish to add into system. Step 3. Enter the device RF code, and preferred device name (up to 31 characters) Step 4. Press OK to save Step 5. If the RF code you entered is valid, the device will be added into the system according to the Area and Zone number. You do not need to learn the device as instructed in 5.1.1. Add Sensor. 22 5.3. Learn Rule You can enter the sensor RF code or ZigBee MAC address manually to assign area and zone number to this sensor. Sensors learned with pre-assigned rule will be put under the area and zone number you specified. This function does not work with Z-Wave devices and DECT device. Step 1. Click Learn Rule. Step 2. You will see the Add Learn Rule menu. Step 3. Select Area and Zone number for this device. Step 4. Select RF or ZigBee. Step 5. Key in the RF code or ZigBee MAC info Step 6. For ZigBee device, select a ZigBee Device Type Step 7. Enter a preferred name for sensor (up to 31 letters or numbers). Step 8. Press OK to save. Step 9. If the process is successful, the screen will display Updated Successfully. You can then check, edit or delete the rule under the Learn Rule menu. Step 10 Repeat the steps to add more rules. 23 Step 11. Learn in the sensors you have entered rules for according to 5.1.1 Add Sensor.
<NOTE>
Learn rule function is only used to pre-assign area and zone number to sensors before learning. To add senor to control panel, you still need to follow the instruction in 5.1.1 Add Sensor to complete the learning process. Backup Device List to Learn Rule You can choose to import learn rule from current learnt in ZigBee devices Step 1. Click Backup Device List to Learn Rule. Step 2. Click OK to confirm. Step 3. The Learn Rule page will be updated with new rules according to current ZigBee device list information. Z-wave device and IP Camera will not be included. 24 5.4. Walk Test This is to test the sensor operation range for installation purpose. Step 1. Click Start to enter Walk Test mode. Step 2. Press the test button on the sensor(s) or any button on the Remote Controller or triggering the sensor. Step 3. When the Control Panel receives a signal, it will show as below and a 2-tone beep will be heard to indicate that it is safe to install the particular sensor in the location. Time: time informaiton Area: operation area Zone: device zone Type: device type Name: device name Rssi: the RF signal strength between Control Panel and sensor. The Rssi value here must be higher than the Rssi value of Panels background noise (please refer to 6.1 Panel Condition section for details). If not, you may still learn in the sensor; however, please relocate the sensor and use Walk test to find a more suitable location. DeviceID: devices unique identification code. Step 4. Once all sensors are tested, click on Stop to exit Walk Test mode. The system will automatically exit Walk Test mode if left idle for 5 minutes. 25 5.5. Exclusion This feature is only available for Z-Wave modules only, or when a Z-wave dongle is inserted into the Control Panel. This feature is for you to remove Z-Wave device only. Step 1. Click on Exclusion and click on Start to start the procedure. Then the Panel will enter the removing mode. Step 2. Refer to the Z-Wave device manual to transmit signal. Step 3. Select the desired Z-Wave and click delete to remove it from the Z-wave list under Device List section (Panel). Then the Control Panel will remove the Z-Wave device. 26 5.6. Z-Wave Tool The Z-wave Tool is used to reset Z-wave module to factory default and remove all Z-wave devices, or change routing setting. Step 1. Click Z-Wave Factory Reset, the Z-Wave module is reset to factory default and all Z-Wave devices will be removed automatically. The Control Panel Home ID will also be changed automatically for a newly added Z-Wave device to recognize. Step 2. The list of Z-Wave devices is still displayed in the Panel webpage. Please go to panel webpage and remove all Z-wave devices. Change Z-Wave Routing Setting Use the other functions to configure your Z-Wave routing settings. 27 5.7. PSS Control This feature is designed to control/edit/delete Power Switches included in the panel. Click Edit to edit attributes of power switches. Click Delete to remove power switch from panel. Click Switch On/Switch Off to turn on/off power switches. Or click Switch Toggle to toggle between on/off status. For Power Switch Dimmer, you can also set its power output level with the slide down menu. 28 5.8. UPIC Control UPIC Control webpage allows you to control UPIC IR Transmitter included in Control Panel Transmit IR Signal Depending on the UPIC model number, select the function to be performed in the drop down menu, then click Setup UPIC for the UPIC to transmit IR Signal. UPIC5 LED Setup (UPIC5 only) UPIC5 has 6 IR LEDs, a central one and 5 surrounding ones. The central LED will always transmit IR signal when activated; besides the central LED, one of the 5 surrounding LEDs can be selected to activate upon IR signal transmission to increase the IR signal coverage. Step 1: Refer to the diagram on the webpage and UPIC5 manual to determine which LED should be used for signal transmission to each particular home appliance. Step 2: Select the LED number from the drop down menu for each appliance type, then click Setup LED to confirm. Please refer to UPIC5 manual for more information.
<EXAMPLE>
If Air Conditioner is set to LED 1, UPIC5 will transmit all Air Condition functions with both Central LED and LED1. If TV is set to LED 5, UPIC5 will transmit all Air Condition functions with both Central LED and LED5. 29 5.9. Surveillance The PIR Camera/Video Cameras and IP Cameras are listed under Surveillance for separate control. Click Edit to edit camera attributes. Click Delete to remove device from panel. Click Request Media to capture a picture or vide PIR camera: A picture will be captured upon request PIR Video Camera: A 10-second video will be recorded upon request IP Camera: The IP Camera will record a video according to its video length setting
(Please refer to IP Camera manual for detail.) For PIR Camera/Video Camera, you can choose to take the picture/video without activating the cameras flash. Picture and video captured by PIR Camera and PIR Video Camera will be stored under the Captured Event webpage. Video Recorded by IP Camera will be stored in the IP Camera, please refer to IP Camera manual to view the video For IP Camera, click View or Setting to access IP Camera webpage for video streaming or setting configuration. A new webpage will open and you will be required to enter the username and password for the IP Camera to access streaming or setting. 30 5.10. Group Control This feature is designed for you to edit a name of group, switch on or off a group of Power Switches. You can also assign Power Switches to groups you desire. 5.10.1. Group Control/Edit Step 1. Specify a new name for a group. Step 2. Click Switch On or Switch Off to turn on or off one group of power switches. 5.10.2 Device Edit/Delete Step 1. Check on the groups you wish to assign the Power Switch. This is a multiple-choice field and you can assign one Power Switch to multiple groups. Whenever one of the assigned groups receives request to turn on/off, all Power Switches belonging to the group will be activated accordingly. Step 2. Click Edit to edit attributes of an added power switch or power switch meter or Delete to delete this device. 31 5.11. Sound/Siren Setting The Sound/Siren Setting page includes setting Siren configuration function. 5.11.1. Device Edit/Delete Click Edit to edit the Sirens attribute, volume and voice settings, or Delete to delete the Siren. After clicking Edit, you will be directed to the Device Edit page:
32
<NOTE>
The Device Edit page is only available for the newest BX/Siren series and BX series without DIP Switch. Edit your Siren setting and information accordingly to instruction below. Click OK to save your new changes when finished. Alternatively, click Default to reset all parameters to default values or click Reset to re-enter all the information. Name: Enter a name for the Siren. Area: Select the area which the Siren belongs to. Zone: Select the Siren zone number. Permanently Bypass: If checked, the Control Panel will completely ignore all signal received from the Siren. A bypassed Siren will not be able to trigger any response, including alarm or fault from the Control Panel. All other attribute settings will also be Whole Area: if checked, all the Volume, Voice and Behavior functions will be simultaneously enabled in Area 1 and Area 2. Attribute:
ignored. Volume:
Alarm Sound: set the volume of the alarm sound of the Siren when alarming. Full arm confirm beep: set the volume of the confirm beep sound of the Siren when 33 Home arm confirm beep: set the volume of the confirm beep sound of the Siren when Disarm confirm beep: set the volume of the confirm beep sound of the Siren when Control Panel is put into Full Arm Mode. Control Panel is put into Home Arm Mode. Control Panel is put into Disarm Mode. Exit beeps of home arm: set exit countdown beep volume under Home Arm Mode. Exit beeps of full arm: set exit countdown beep volume under Full Arm Mode. Door Chime: set the volume of the Door Chime sound (Ding-Dong Sound). Entry beeps of full arm: set entry countdown beep volume under Full Arm Mode. Entry beeps of home arm: set entry countdown beep volume under Home Arm Mode. Voice:
Phone (VDP). conditions. Behavior
(The following functions are only available for SRV devices):
Doorbell: set the volume of the ring tone when pressing the button on the Video Door Fault beep: set the volume of the voice played when system is force armed under fault Pre-alarm (outdoor IR warning beeps): set the volume of the voice played when an outdoor burglar sensor(Door Contact, IR) is triggered.
(The following functions are only available for RF modules):
Burglar trigger in home arm: Enable or Disable whether Siren is activated when an Burglar trigger in full arm: Enable or Disable whether Siren is activated when an alarm is alarm is triggered under Home Arm. triggered under Full Arm. Strobe activation: Enable or Disable Siren LED strobe activation. Exit flash: Enable or Disable Siren LED flash during an exit countdown period. Confirm flash: Enable or Disable Siren LED flash when system Armed/Disarmed. Alarm-in-memory sound: Enable or Disable Alarm in Memory sound. Entry flash: Enable or Disable Siren LED flash during an entry countdown period. Trigger flash: Enable or Disable the flashing from the Siren LED when alarming. Fault sound: Enable or Disable system fault sounds. 34 5.11.2. RF Siren Setup Tamper On/Off
<NOTE>
You can enable/disable all RF Sirens tamper protection with this function. Select to turn on or off the sirens tamper function. When turned off, if siren tamper will be enabled again automatically after one hour if not turn on manually during the one hour period. 35 6. Program the System After the initial set-up, you can then program your system by clicking on the left menu to set them individually. 6.1. Panel Condition In the Panel Section, user can arm, disarm or partially arm the system. Besides, it displays the current Panel Status & Device Information. Panel Control Panel Status Select a choice to arm, disarm or partially arm the system. The Control Panel will update the panel status periodically. However, in order to show the current status, you must reload the screen to refresh the display. Battery: When battery is running low, a low battery message will be displayed to inform you to recharge the battery. Tamper: (reserved) Interference: This is for you to check whether the Control Panel is purposely interfered. The jamming period detected will be accumulated, and when the total period exceeds 30 seconds within 1 minute, a Jamming message will be shown and reported to the Central Monitoring Station accordingly. AC activation: To check whether AC power is connected. If not, it will show AC Failure. Background RSSI: Rssi value is for you to check the RF environment around the 36 Control Panel. It ranges from 0 to 9, where 0 refers to the weakest and 9 refers to the strongest background noise. Therefore, the lower the Rssi value, the better the environment. The function is designed to send a command to sever over the polling or XMPP protocol. Test System Fault Status The fault events that exist in the alarm system is displayed under this section. When fault event exists in system, the control panel Fault LED will light up to indicate fault status under Disarm or Home Arm mode (The Fault LED will not light up under Arm mode). When fault event exists, and you attempt to arm the system, the arming action will be prohibited and the panel will display fault information on the webpage. If you still want to arm the system, perform the arming action again to force arm. You can check the Clear box in the setting column then click OK to ignore the fault event. Cleared fault event will not cause the Fault LED to light up, nor prohibit arming. Device List Area: operation area 1. The Control Panel will update the device information periodically. However, in order to show the current status, you must reload the screen to refresh the display. Zone: device zone Type: device type Name: device title Status: devices current status, such as tamper status, battery status, out of order condition or DC open. If PSM is added into the system, the data of PSM, such as On/Off status, voltage, electric current and watt, will be displayed. 2. Under Device, you could further edit or delete an added device (please refer to 5.1.3 and 5.1.4 for details). Beside, you can reset Panel settings or clear the system faults by pressing Reset Panel.
- After pressing Reset Panel, the Control Panel will restart in 60 seconds and all configured values will be kept without any change. Note 37 The function is designed for installer to make a note for each control panel. The note you make here can be delivered to a server over XMPP or polling protocol. 38 6.2. Panel Settings Program the Panel, Time and Sound Settings at your discretion. Panel Setting AC Fail Report: When an AC power failure is detected, your Control Panel will report to the Central Monitoring Station according to the duration set under AC Fail Report. If 5 minutes is set, the event will be automatically reported to the CMS after 5 minutes. Your Control Panel will start to use its battery power instead of the mains power until the fault even is cleared. AC Fail Suspend: After an AC power failure event is reported, the Control Panel will convert to sleep mode to conserve battery power. During this period, both GSM and Ethernet port will be powered off, while the RF and ZigBee modules will keep working. If 5 seconds is set, both GSM and Ethernet port will be powered off after 5 seconds. In order to send messages to the CMS, the Control Panel will power on its GSM and Ethernet temporarily. 39 Jamming Report: this function is reserved. Auto Check-in: this is to select whether the Control Panel needs to send check-in reporting to the Central Station automatically and to select the period of time between check-in reports. Options available are Disable, 1 hour, 2 hours, 3 hours up to 4 Weeks. Auto Check-in Offset Period: This is to set the time delay before the first Auto Check-In report is made. After power is supplied or re-supplied to the Control Panel, a test report will be sent to the Central Monitoring Station (CMS) based on the Offset Period. This is used to test whether the CMS is able to receive the report from the Panel accurately. After this test report is sent, the Control Panel will then send reports at regular interval based on the setting of the Auto Check-in Report. For example, if Offset Period is set to 2 Hours, and Auto Check-in Report is set to 12 hours, the Control Panel will transmit an event code 602 to the CMS after 2 hours, and then report 602 event code periodically at a regular intervals of 12 hours. IR Camera Resolution of Alarm Images: This is to select the resolution and number of pictures taken by PIR Camera when the camera detects a movement in armed mode. Options available are 320x240x3 images (Default), 320x240x6 images and 640x320x3 images. Outdoor IR Camera in Greysclae: This is to select whether pictures from Outdoor PIR Camera should be taken in greyscale instead of color pictures. Options available are: Disable (Color Picture) and Enable (Greyscale picture) Bypass Ethernet: Select to enable or disable Bypass Ethernet function. When YES is selected, the Control Panel will bypass connection fault when Ethernet cable unplugged status is detected. Area: Select operation area to apply setting. Final Door: If set to On: When the system is Away Armed and under exit timer countdown, if a opened Door Contact set to Entry attribute is closed, the system will automatically arm the system even if the exit delay timer has not expired yet. Arm Fault Type: Select how the system should respond when it is being armed under fault condition. Confirm: The panel will first display a Mode Change Fault message and emit 2 beeps. Arming again within 10 seconds will force arm the system. Direct Arm: The system will be force armed directly without displaying fault message and report an event. Tamper Alarm: Select whether the siren should sound alarm when the tamper is triggered. Full Arm: when tamper is triggered under Full arm mode, Control Panel raises a local alarm and sends report to the monitoring center. While under Home Arm or Disarm modes no alarm will be activated, nor report sent. Always: Control Panel raises a local alarm and send report for tamper-trigger in all modes. Supervision Check: Select to enable or disable system supervision function. When ON is selected, the Control Panel will monitor the accessory devices according to the supervision signal received. Area Setting 40 Time Setting Supervision Timer: The Control Panel monitors accessory devices according to the supervision signal transmitted regularly from the device. User this option to set a time period for receiving supervision signals. If the Control Panel fails to receive supervision signal from a device within this duration, it will consider the device out of order and report the event accordingly. Entry Delay 1 for Full Arm: Set Entry Delay Timer 1 for full arm mode. When a sensor set to Start Entry Delay 1 is triggered under Full Arm mode, the control panel will begin Entry Delay Timer countdown according to duration set with this option If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before the Entry Delay Timer expires, the alarm will be activated and the panel will send report. Entry Delay 2 for Full Arm: Set Entry Delay Timer 2 for full arm mode. When a sensor set to Start Entry Delay 2 is triggered under Full Arm mode, the control panel will begin Entry Delay Timer countdown according to duration set with this option If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before the Entry Delay Timer expires, the alarm will be activated and the panel will send report. Exit Delay for Full Arm: Set the Exit Delay Timer when entering Full Arm mode. When the user changes system mode to Full Arm, the panel will begin Exit Delay Timer Countdown and enter Full Arm mode when the timer expires. The user must leave area protected by sensors before the timer expires, otherwise an alarm will be activated with the sensor is triggered. Entry Delay 1 for Home Arm: Set Entry Delay Timer 1 for Home Arm mode. When a sensor set to Start Entry Delay 1 is triggered under Home Arm mode, the control panel will begin Entry Delay Timer countdown according to duration set with this option If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before the Entry Delay Timer expires, the alarm will be activated and the panel will send report. Entry Delay 2 for Home Arm: Set Entry Delay Timer 2 for Home Arm mode. When a sensor set to Start Entry Delay 2 is triggered under Home Arm mode, the control panel will begin Entry Delay Timer countdown according to duration set with this option If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before the Entry Delay Timer expires, the alarm will be activated and the panel will send report. Exit Delay for Home Arm: Set Exit Delay Timer for Home Arm mode. When the user changes system mode to Home Arm, the panel will begin Exit Delay Timer Countdown and enter Home Arm mode when the timer expires. The user must leave area protected by sensors before the timer expires, otherwise an alarm will be activated with the sensor is triggered (Default as 10 seconds). Alarm Length: Set the duration the external siren should sound when an alarm is activated. Cross Zone Timer: Please refer to 10.3 Cross Zone Timer for details Fire Verification Time: Please refer to 10.4 Fire Verification Timer below for details. Sound Setting 41 Burglar Siren setting: this is for you to decide whether the Control Panel sounds when there is a burglar alarm. Fire & Smoke Siren setting: this is for you to decide whether the Control Panel sounds when there is a fire alarm, smoke alarm, or gas alarm. Others Siren setting: this is for you to decide whether the Control Panel sounds when there is a panic alarm, water alarm, emergency alarm, etc. Door Chime Setting: this function is available only when the attribute of Door Contact
(DC) and/or PIR detector (IR) is set as Door Chime. The Control Panel sounds a Door Chime (Ding-Dong Sound) while the DC and/or IR is activated in Disarm / Full / Home / Entry mode. Entry Delay Sound for Full Arm: this is for you to decide whether the Control Panel sounds count-down beeps and volume of beep during the entry delay time in the full arm mode. Exit Delay Sound for Full Arm: this is for you to decide whether the Control Panel sounds count-down beeps and volume of beep during the exit delay timer in the full arm mode. Entry Delay Sound for Home Arm: this is for you to decide whether the Control Panel sounds count-down beeps and volume of beep during the entry delay time in the home arm mode. Exit Delay Sound for Home Arm: this is for you to decide whether the Control Panel sounds count-down beeps and volume of beep during the exit delay timer in the home arm mode. Confirm Sound: this is for you to decide whether to turn off/or adjust Control Panel beeping sounds when changing Arm/Home Arm/Disarm mode. Warning beep: this is for you to decide whether the Control Panel will sound a warning beep whenever a fault condition has been detected and displayed. The warning beep will be silenced after the Fault message has been read by the user. When a new fault condition is detected, it will then again emit a warning beep every 30 sec. Entry/ Exit Only Final Beeps: This is for you to determine when the Control Panel should start warning beep during Entry or Exit countdown timer. For example, if the setting is set to 5 seconds, the Control Panel will only stat warning beep during the last 5 seconds of Entry or Exit countdown timer. When set to Disable, the Control Panel will sound warning beep during the entire Entry or Exit countdown timer. 42 6.3. PIN Code The User PIN Codes are used by Remote Keypad accessory to control system mode remotely. The 2 areas in the control panel have 60 User PIN Codes available for setting. Each consists of 4-6 digits (numeric number 0~9), no disallowed PIN code. User PIN code #1 is always activated factory default. User PIN #1 in Area 1, 2 Password: 1234 User Code Setting User Code: Enter the 4-digit code in the field. Tag Number: The number indicates the tag which is associated to the user code. By applying a tag to the tag sensor zone of Remote Keypad and clicking the Load button, the corresponding tag number will be loaded. Area: Select the area for setting User PIN Code. User Name: Enter a user name for easy recognition of system events. Up to 17 alphanumerical characters are allow for each user name. Latch:
Latch Latch Report ON = Whenever the User PIN Code is used to change system mode, the panel will report the event. Latch Latch Report OFF = When the User PIN Code is used to change system mode, the panel will not report the event. Delete: Check the box if you want to delete selected user. User#1 in each area cannot be deleted After finish all setting, click OK to confirm change. 43 7. Network Settings 7.1. GSM (HSGW-MAX8 only) Check SIM GPRS This is designed for the system to check the SIM card or not. (If users do not intend to use the GSM funciton, please tick NO to ensure the system will not check if the SIM card is inserted or not and it will not display the GSM fault by LED flashing.) In order to allow GPRS to serve as a back-up IP Reporting method, this section will need to be programmed before reporting. APN (Access Point) Name User (GPRS) 44 It is the name of an access point for GPRS. Please inquire your service provider for an APN. When APN is set, the system becomes valid for internet connection. It is the Log-in name to input before accessing the GPRS feature. Please inquire your service provider. Password (GPRS) It is the User Password to input before accessing the GPRS feature. Please inquire your service provider.
<NOTE>
MMS All values will be applied to both Areas 1 & 2. The MMS settings are offered by your telecom service provider. Before configuring this function, contact your service provider for correct MMS setting information of the inserted SIM card. APN (Access Point) Name Enter a MMS APN name provided by your service provider. Enter the Log-in name for accessing the MMS feature provided by your telecom service provider. Enter the password for accessing the MMS feature provided by your telecom service provider. Enter the MMS APN URL provided by your telecom service provider. Enter the MMS Proxy Address provided by your telecom service provider. Enter the MMS Proxy Port provided by your telecom service provider. User Password URL Proxy Address Proxy Port SMS SMS Keyword SMS P-Word For sending remote commands to system via SMS message, a personalized password is required for the Control Panel to recognize your authority. Program Keyword is used to recognize the identity of a valid user; and to give authority for Remote Installing (through SMS Text) or Remote Upgrading purposes (through GPRS). This keyword will need to be inserted whenever the Remote Setting or Remote Upgrading is required. A maximum of 15 characters is allowed. Two Way Setting The two-way setting is designed to adjust speaker volume and microphone sensitivity on DECT device for two-way communication. 45 Send SMS Message Step 1. Click Send SMS. This feature is designed for you to send a SMS message on this web configuration page. Step 2. Enter a desired phone number and text message. Reset GSM This feature is designed for you to reset GSM module. Step 1. Click GSM Reset. Step 2. A pop-out message Are you sure? is displayed. Click Yes to confirm resetting. 46 7.2. Network This is for you to program the Network for IP connection. Obtain an IP address automatically (DHCP) If DHCP is selected, the Network will obtain an IP address automatically with a valid Network DHCP Server. Therefore, manual settings are not required. This is only to be chosen if your Network environment supports DHCP. It will automatically generate all information. Use following IP address You can also enter the Network information manually for IP Address, Subnet Mask, Default Gateway, Default DNS 1 and Default DNS 2. Please make sure that you have obtained all required values according to your Network environment. Please contact your network administrator and/or internet service provider for more information. DNS Flush Period You can set the system to clear current DNS resolution records for all entered URL settings (Reporting, Upload, XMPPetc.) after a set time period. The system will then resolve the Domain Name again and acquire new IP address for the URL settings. This function is disabled by default. 47 7.3. Wireless Use Wireless webpage to setup the panels WiFi setting There are 3 ways you can connect to the wireless network. 1. Search for WiFi AP: Click Scan WiFi AP to search for available wireless network Select the available Wireless APs from the list by clicking Set after AP info column and enter the required information (pre-shared key, etc.) and click the OK button. 2. Enter the Wireless information manually and click OK to connect. 48 7.4. UPnP UPnP is Universal Plug and Play, which opens networking architecture that leverages TCP/IP and the Web technologies to enable seamless proximity networking in addition to control and data transfer among networked devices in the home, office, and public spaces. When enabled, you will be able to see this device via any UPnP discovery tool Enable UPnP Device:
Enable UPnP Port Redirect:
The device will try to find an UPnP-supported router and set up the port to redirect to the router. Port forwarding function allows you to configure specific communication ports to be routed to your system over the Internet for users to access their IP camera(s) remotely. Port Forwarding:
1. Local Port: type 80. 2. External Port: type 8080. 3. Protocol: type TCP. After port forwarding has been set up, the router will forward incoming requests on port that your IP Camera users. To set up port forwarding on your router, please refer to your routers instruction manuals for detail. 49 8. System Settings 8.1. Administrator Setting For setting new Administrator Log-in Name and Password. Please note both User Name and Password are case sensitive. Step 1. Enter the preferred User Name. Step 2. Enter the preferred Password in the New Password field and repeat the same Password in the Repeat Password field. 50 8.2. Home Automation It is used to set Home Automation rules to control sensors and home appliances. You can set up to 100 rules. Step 1. Click on Edit. Step 2. Select an operation area. Step 3. Set a rule condition. Step 4. Set a rule schedule. Step 5. Select the corresponding action rules in the Execution field. Area Select an opeartion area. Rule Condition The rule condition determines under which circumstances the rule should be activated. Empty : When set as Empty, the system will follow the schedule time and execution rule to respond accordingly. Trigger Alarm : When set as Trigger Alarm, if the specified alarm event is
(Burglar/Some/Medical/Water/Silent Panic/Panic/Emergency/Fire triggered, the rule will be activated according to rule schedule and execution setting.
/CO Alarm) Mode Change : When set as Mode Change, when the system enters specified mode, the rule will be activated according to rule schedule and execution setting. 51 Mode Change and Exit Timer Stopped : When set as Mode Change and Exit Timer Stopped, when the system changes mode to and Exit Delay Timer expires, , the rule will be activated according to rule schedule and execution setting. Mode Start Entry Timer : When set as Mode Start Entry Timer, when the system begins to countdown Entry Delay, the rule will be activated according to rule schedule and execution setting. Temperature Below : When set as Temperature Below, if the temperature detected by specified temperature sensor drops below set threshold, the rule will be activated according to rule schedule and execution setting. Temperature Above : When set as Temperature Below, if the temperature detected by specified temperature sensor exceeds set threshold, the rule will be activated according to rule schedule and execution setting. Temperature Between : When set as Temperature Between, if the temperature detected by specified temperature sensor falls within the range specified, the rule will be activated according to rule schedule and execution setting. High Power Consumption : When set as Power Consumption Above, if the power output watt from a specific Power Switch exceeds, the rule will be activated according to rule schedule and execution setting. Humidity Above : When set as Humidity Above,if the humidity reading from specified room sensor rises above the level specified, the rule will be activated according to rule schedule and execution setting. Humidity Below : When set as Humidity Below,if the humidity reading from specified room sensor falls below the level specified, the rule will be activated according to rule schedule and execution setting. 52 LUX Between : When set as LUX Between, if the lux reading from specified light sensor falls below the level specified, the rule will be activated according to rule schedule and execution setting. Random : The Random condition must be used along with Rule Schedule setting. Set a percentace from 1 to 10%. When the panel time reaches programmed Rule Schedule time. The Panel will activate rule according to set chance. Example: If set as 10%, whenever the panel reaches programmed Rule Schedule time, there will be a 10% chance the rule is activated. Rule Schedule Always : When set as Always, the rule can be activated anytime. Schedule Once : When set as Schedule Once, the system will follow the rule condition and execute rule according to the exact date and time specifed.. Schedule Every Month : When set as Schedule Every Month, the system will follow the rule condition and execute rule according to date and time specified every month. Schedule Every Week : When set as Schedule Every Week, the system will follow the rule condition and execute rule according to day of the week and time specified every week. Schedule Every Day : When set as Schedule Every Day, the system will follow the the rule condition and execute rule according to time specified every day Execution Execution is the actual action performed by Control Panel when both Rule Condition and Rule Schedule requirements are met Zone Switch Off: Turn on the Power Switch at specified zone. 53 Zone Swich On : Turn on the Power Switch at specified zone. Zone Swich On For : Turn on the Power Switch at specified zone for a set duration. Zone Switch Level:: Change the power output level for Dimmer at specified zone. Zone Swich Toggle : Toggle on/off the Power Switch at specified zone. Group Switch Off : Turn off all Power Switches assigned to specified group. Group Switch On : Turn on all Power Switches assigned to specified group. Group Switch On For : Turn on all Power Switches assigned to specified group for a set duration. Mode Change : The system will change to the mode as you specified. Request Image : The PIR Camera in specified zone will take a picture. Request Image (All) : All PIR Cameras in the system will take a picture. Request Image (No Flash): The PIR Camera in specified zone will take a picture.without activating its LED flash. 54 Request Image (All, No Flash) : All PIR Cameras in the system will take a picture without activating LED Flash. Request Video : The PIR Video Camera or IP Camera in specified zone will record a video. Request Video (All) : All PIR Video Cameras and IP Cameras in the system will record a video. Setup UPIC:: The UPIC and specified zone will transmit Off/Heat/Cool command to the air conditioner as programmed. Hue Control:: Adjust the hue and saturation of the Philips Hue at sepecified zone as programmed. Hue Saturation Trigger Alarm: Choose to activate one of the following alarms: High Temperature Alarm, Low Temperature Alarm, High Power Consumption Alarm, High Humidity Alarm and Low Humidity Alarm Apply Scene:: the system will execute preprogrammed Scene number. Please refer to 8.3. Scene for detail. 55 8.3. Scene The Scene setting allows you to customize a series of actions with your devices, such as Power Switch control, image/video request, mode change and trigger alarm. The programmed scene can be set to activated when a device is triggered. (See 5.1.3. Edit Devicesl), or when a Home Automation Rule is excecuted. (See 8.2. Home Automation) For example, you can set a scene to control multiple lightings, then set your Remote Controller to activate the scene when the button is pressed, or set a Home Automation Rule to activate the scene. Step 1. Click on Edit. Step 2. Enter a name for the scene. Step 3. Select an Area Step 4. Select an action to be executed when the scene is activated. Refer to the Rule Execution section in 8.2. Home Automation for detail. 56 Step 5. Repeat Step 2-3 to setup the execution you wanted. As many as 5 executions can be included in one scene. Step 6. Click Done. Step 7. Click OK at bottom of webpage to confirm the new scene setting.. 57 8.4. Reporting This is used for installer to program/ set all requirements for reporting purposes. Reporting URL This is used for installer to program report destinations. 1 Climax CID protocol via IP Format:
ip://(Account Number)@(server ip):(port)/CID Example: ip://1234@54.183.182.247:8080/CID 2 SIA DC-09 protocol via IP Format:
ip://(Account Number)@(server ip):(port)/SIA Example: ip://1234@54.183.182.247:8080/SIA 3 SIA DC-09 protocol via IP with AES encryption Format:
ip//(Account Number)@(server ip):(port)/SIA/KEY/(128,196 or 256 bits Key) Example:
ip://1234@54.183.182.247:8080/SIA/KEY/ 4A46321737F890F654D632103F86B4F3 4 SIA DC-09 protocol using CID event code via IP Format:
ip://(Account Number)@(server ip):(port)/CID_SIA Example: ip://1234@54.183.182.247:8080/CID_SIA 5 SIA DC-09 protocol using CID event code via IP, with HEX encryption. Format:
ip//(Account Number)@(server ip):(port)/CID_SIA/KEY/(HEX) 58 Example:
F3 ip://1234@54.183.182.247:8080/CID_SIA/KEY/4A46321737F890F654D632103F86B4 6 CSV protocol via IP Format:
ip//(Account Number)@(server ip):(port)/CSV Example: ip://1234@54.183.182.247:8080/CSV 7 CSV protocol via IP including username and password Format:
ip//(Account Number)@(server ip):(port)/CSV/User/Pasword Example: ip://1234@54.183.182.247:8080/CSV/abcd/1357 8 Email Format: mailto:user@example.com Example: mailto:john@gmail.com Level Select a reporting condition:
All events: The system will report all events to this destination. Alarm events: The system will only report alarm event to this destination. Status events: The system will only report status event(non-alarm events) to this destination. Group following principle:
Select a group for your report destination The system will make report according to the Group with higher priority will be reported first: Ex: Group 1 Group 2 Group 3. If reporting to the first destination in a group fails, the system will move on to the next report destination in the group. If reporting to one of the report destinations in a group is successful, the system will consider reporting to this group successful and stop reporting to rest of the destinations in the group. It will then move on to report to the next group. If reporting to all destinations in a group fails, the system will retry report to group according to retry times set below. If reporting is still unsuccessful after retries, the system will move on to report the the next group according to Essential/Optional setting below. After completing a round of reporting (From Group 1 Group 2 .. Group5), If there is any group set as Essential which has not received report successfully, the system will restart the reporting cycle to retry reporting until every group set as Essential is reported successfully. Essential/Optional Essential: the system will report to all groups set as Essential. The system will never give up trying to report to any group set as Essential until at least one of the destinations in every Essential group successfully receives the report. Group 1 is always set as Essential and cannot be changed. Optional: The system will only report to group set as Optional when reporting to its previous group fails. For example: if Group 3 is set is optional, the Control Panel 59 will only report to Group 3 if reporting to Group 2 fails. 1 Retry/ 3 Retry/ 5 Retry/ 10 Retry/ 99 Retry:
If reporting to all destinations in a group fails, the system will retry reporting to the group according to the retries times set here.
<NOTE>
When the panel is registered into Climaxs Home Portal Server, URL1 will be filled in with Home Portal Server report information. Do not change the information once registration is complete or reporting to Home Portal Server may encounter error. After registering the panel in Home Portal Server, if you wish to set more reporting destination, the new report destination should be set to different group than URL1 otherwise it may not be able to receive report successfully. 60 8.5. Code Settings The Duress Code, Master Code & Temporary Code adds the flexibility of different security level for operation in Code Settings menu. Step 1. Key in your preferred 4-6 digit Installer Code, Duress Code, Master Code, and/or Temporary Code. Step 2. You can also choose to have Latch Option On / Off for Temporary Code by tick the Latch Option box and press OK to confirm the settings. Installer Code Master Code The Installer Code is used for SMS Remote Programming, when sending a remote programming message, the user needs to enter Installer Code in the message to be able to program the system. The default Installer code is: 7982. The default Master Code for Area 1 and Area 2 are: 1111 and 2222 respectively. 61 Area Duress Code Guard Code Each Area has different Duress Code, Master Code, and Temporary Code. Select the Area to program the code setting in this area. The Duress Code is designed for transmitting a secret & silence alarm. When Duress Code is used for accessing the system, the Control Panel will report a secret alarm message without sounding the siren to the Central Monitoring Station to indicate of a Duress Situation in Progress. The Duress Code consists of 4-6 digits and is not activated as default by the factory. The Guard Code is designed for security patrol personnel to arm/disarm the system. It can be set the same as a User PIN Code. The Guard Code consists of 4-6 digits and is not activated as default by the factory. Master Code This function is currently disabled. Temporary Code Temporary Code is also used to arm/disarm the system, but it is for a temporary user. The temporary Code is ONLY valid for one-access per arming and disarming. Afterwards, the Temporary Code will be automatically erased and needs to be reset for a new Temporary user. The Temporary Code consists of 4-6 digits and is not activated as default by the factory. Latch Option This is to program the Latch Key Reporting feature for Temporary Code. Please click the box to select the options. Latch Latch Report ON = Whenever the system is armed, home/ day home/ night home armed or disarmed, the Panel will transmitt Contact ID code / SMS message /
GPRS reporting (according to pre-setting) to notify the Central Monitoring Station. Latch Latch Reprot OFF = Whenever the system is armed, home/ day home/ night home armed or disarmed, the Panel will NOT transmit reporting(s) to notify the Central Monitoring Station. Delete Except Master Code which cant be disabled in any way, Temporary and Duress Code can be disabled by cleaning the code box and leaving the box as blank. 62 8.6. SMTP Setting Program the mail server related settings. The email account you set here would be used to send report for events or picture and video clip captured by PIR Camera and PIR Video Camera. Server: set the mail server (max. 60 digits/alphabets). Port: set the port number (max. 5 digits/alphabets). Step 1. Enter the following settings:
User: set the mail account name (max. 30 digits/alphabets). Password: set the password corresponding to the mail account name (max. 30 digits/alphabets). From: set the email address according to your mail sever and account name. If your mail server supports other email address, you can enter the email address here. (max. 30 digits/alphabets). Using TLS/SSL encrypted channels (Secure SMTP):If your mail server uses TLS or SSL encryption method for secure transfer, please click the box to enable the setting Step 2. Click OK to confirm the setting. 63 8.7. Media Upload The system can deliver captured images and video clips captured by PIR Cameras and PIR Video Camera to cell phone, email or ftp. FTP: ftp://user.password@server/path Email: mailto:user@server (transmitting an alarm image over Ethernet) HTTP: http://ip:port/path Manitou: manitou://user@server:port MMS via Telephone: mms: telephone number MMS via GPRS: mms: user@mail.server (transmitting an alarm image over MMS) If Deleted events after uploaded is checked, the system will automatically clear all captured images which are displayed in the Captured Events menu after it successfully sends out those captured images to preset reporting destinations.
<NOTE>
64 8.8. Polling The polling function enables the Control Panel to query the destiation you set (URL1 or URL2) in turn as to whether it has any data to transmit. URL/URL2: ip://server:port/path Interval : interval time of polling 65 8.9. XMPP XMPP setting enables the Control Panel to query the set destination. This setting is required for the Control Panel to connect to Climaxs Home Portal Server for remote control. If the panel is disconnected from the server, it will retry connection every 3 minutes. Server: server address (dependent upon default firmware) US server: us.vestasmarthome.com EU server: eu.vestasmarthome.com Taiwan server: tw.vestasmarthome.com Password: authorized user password Port: servers port number User: authorized user account name Domain: domain address Buddy List: contact destination Ping Interval: server connection test interval 66 8.10. Date & Time Program the current Date & Time and set automatic synchronization with internet time server. Date & Time: set current month, date and time. Time Zone: choose your time zone, and then the system will calculate the daylight saving time automatically (if necessary). Internet Time: the system will automatically synchronize with an internet time server. Tick the check box to enable this function. Available options: time1.google.com, pool.ntp.org, time.nist.gov and tick.usno.navy.mil. 67 8.11. Dynamic DNS This page is used to provide you the Control Panels current public IP address. Dynamic DNS Server: http://checkip.dyndns.org 68 8.12. Test IP This is for you to test the Control Panel internet connection. Step 1. Enter the URL destination you want to test connection to. Step 2. Enter the test interval. Step 3. Click OK You can check the test connect result in System Log. 69 8.13. Firmware Upgrade You can update the firmware via this web page. Step 1. Click on Browse and locate the latest firmware file (unzipped image.bin file) in your PC. Step 2. Press Apply to upload the latest firmware to Control Panel Step 3. Wait for 1 min and do NOT power off during this time. Step 4. Once Firmware upgrading is complete, the Control Panel will reboot automatically 70 8.14. RF Firmware Upgrade You can update the Control Panels RF firmware via this web page. Step 1. Click on Browse and locate the latest firmware file (unzipped image.bin file) in your PC. Step 2. Press Apply to upload the latest firmware to Control Panel Step 3. Wait for 1 min and do NOT power off during this time. Step 4. Once Firmware upgrading is complete, the Control Panel will reboot automatically 71 8.15. Factory Reset Yan can clear all programmed parameters in the Control Panel and reset it to Factory Default. Once the Factory Reset is executed, all the programmed settings will returned to its default value, and all the learnt-in devices will be removed. You will need to restart the programming and learning process again. Remote Reset Step 1. Tick the Kept current network setting or Kept current device list box to keep the current Network settings. Otherwise, the system will reset its value back to factory default. Tick the Kept current device list box to keep the current learnt-in devices. Otherwise, the system will reset its value back to factory default. Step 2. Press Yes to continue the Reset procedure. Step 3. Wait for 1 min and do NOT power off during this time. Step 4. Once reset is complete, it will automatically reboot the main unit. 72 Local Reset Step 1. Disconnect the AC adaptor, slide battery switch to OFF. Step 2. Press and hold the reset button and connect the AC adaptor to the Control Panel. DO NOT release the button yet. Step 3. Keep holding the reset button for about 45 seconds then release until you hear one long beep. The 3 LEDs will flash 3 times. Step 4. Release the button and wait for the Control Panel to reboot. 73 8.16. Backup & Restore Yan can backup all programmed parameters and save these programmed values into a file. Besides, you also can restore pre-programmed settings. 8.16.1 Backup Data Yan can backup all programmed data and save these programmed values into a file. Step 1. Click Download configuration file. Step 2. Click Download configuration file. 8.16.2 Restore Settings Step 1. Click Browse, select a saved file. Step 2. Click Apply to apply the pre-programmed values to the main unit. 74 8.17. System Log The sytem log webpage logs the control panels detail system operation history. System Log File Download Click to download a detail log files into your computer for more information. 75 9. Event & History This section introduces event history of the system. 9.1. Captured Events This page stores all captured pictures and videos by PIR Camera and PIR Video Camera. When a PIR Camera is triggered, it will take 3 pictures in quick succession, when a PIR Video Camera is triggered, it will take a 10-second video clip. You can also request the PIR Camera to take a picture and PIR Video Camera to take a 10-second video clip manually. Caputred events will be displayed in this page with their information for you to view. Simply click on the picture or video to view them. You can also click Delete to delete the event. Reload : Click to refresh the page content Limit # of Items: Click the drop down menu on the pageto select the numbers of captured events you want to display. 76 9.2. Reported Events This page stores all triggered events by the control panel by recording the events CID event code and report status. Reload : Click to refresh the page content Limit # of Items: Click the drop down menu on the pageto select the numbers of captured events you want to display. 77 9.3. Event Log The Event Log page records specific actions performed by the Control Panel and accessory devices. Reload : Click to refresh the page content Limit # of Items: Click the drop down menu on the pageto select the numbers of captured events you want to display. 78 9.4. Device History You can track your ZigBee accessory device status history under Device History. For Power Switch Meter or Temperature Sensor, the update history power consumption or temperature ireading will be displayed under this page (the current info is also displayed under Panel and PSS Control). Reload : Click to refresh the page content Limit # of Items: Click the drop down menu on the pageto select the numbers of captured events you want to display. 79 10. Appendix 10.1. Fault Event Description During operation, when the panel detects faulty events, the panel will log the event and make reports. When fault events exist in the system, the panel Fault LED will light up and the panel will emit a beep every 30 seconds. Fault Event Table Fault Event Descriptions The Control Panels AC power is disconnected When AC failure is detected, the panel will turn off both Ethernet and mobile network functions when idle to conserve power. Ethernet and mobile network Panel AC Failure will be activated temporarily when an event is detected by the panel (i.e. alarm trigger) to send report, and will turn off again after finishing report. Accessing the panel via remote server XMPP connection is disabled during AC failure. Panel Low Battery The panels backup battery is only used when AC failure is detected. When the backup battery voltage is low, the panel low battery event is generated Panel Tamper The tamper switch on back of the panel is not compressed against the back cover. This means the panels cover is opened and not properly sealed. Battery Dead/Missing The panel cannot detect backup battery, this means the battery is either dysfunctional, or the battery switch is not slid to ON position. Interference/Jamming The panel detects radio frequency jamming, which will affect its ability to receive signal from RF devices (Does not include ZigBee/Z-wave/Wi-fi signal) Device Low Battery The accessory device at indicated zone number is low on battery Device AC Failure connection. The accessory device at indicated zone number does not have AC power Device Tamper The tamper switch of the device at indicated zone number is open The panel was unable to receive supervision signal sent from accessory device Device Supervision at indicated zone number for the duration of Supervision Timer programmed. Failure
(i.e. If Supervision Timer is set to 12 hours, the panel will generate supervision failure event after failing to receive supervision signal for 12 hours) 80 10.2. Control Panel Mode and Response Table For Alarm Activation by Events and Control Panel Responses, please refer to the following table:
System Mode / Status Attribute Disarm Full Arm Home Arm Under Exit Timer Under Exit Timer (No Response) Under Entry Timer No Response No No No Response Response Response No Response No Response Start Entry Delay 1 Start Entry Delay 2 Instant Burglar Alarm
(Interior) Instant Burglar Alarm
(Interior) Start Entry 1 Start Entry Burglar Alarm
(Perimeter) 1 Burglar Alarm
(Interior) Start Entry 2 Start Entry Burglar Alarm
(Perimeter) 2 Burglar Alarm
(Interior) Chime Door Chime Door Chime Burglar Follow Burglar Instant Burglar Outdoor Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Outdoor Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Outdoor Alarm Door Chime Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Outdoor Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm No Delayed Response Burglar Alarm No Delayed Response Burglar Alarm No Response Door Chime No Delayed Response Burglar Alarm No Instant Response Burglar Alarm No Response Instant Burglar Outdoor Alarm Cross Zone Set/Unset
(Opening) Set/Unset
(Closing) 24H Burglar Full Arm No Response Instant Burglar Alarm See 10.3. Appendix Cross Zone Verification No Delayed Response Burglar Alarm No Response Full Arm Full Arm No Response No Response Disarm Disarm Disarm Disarm Disarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm Instant Burglar Alarm 81 Instant Smoke Alarm Instant Medical Alarm Alarm Instant Water Alarm 24H Smoke 24H Medical Instant Smoke Alarm Instant Medical Alarm Instant Smoke Alarm Instant Medical Alarm Instant Smoke Alarm Instant Medical Alarm Instant Smoke Alarm Instant Medical Alarm Instant Smoke Alarm Instant Medical Alarm 24H Fire Instant Fire Instant Fire Instant Fire Instant Fire Instant Fire Instant Fire Alarm Alarm Alarm Alarm Alarm 24H Water Instant Water Alarm Instant Water Alarm Instant Water Alarm Instant Water Alarm Instant Water Alarm 24H CO Instant CO Instant CO Instant CO Instant CO Instant CO Instant CO Alarm Alarm Alarm Alarm Alarm Alarm 24H Gas Instant Gas Instant Gas Alarm Alarm Instant Gas Alarm Instant Gas Instant Gas Instant Gas Alarm Alarm Alarm 24H Heat Instant Heat Instant Heat Instant Instant Heat Instant Instant Heat Alarm Alarm Heat Alarm Alarm Heat Alarm Alarm 24H Silent Panic Instant Silent Panic Alarm Instant Silent Panic Alarm Instant Instant Silent Panic Silent Panic Alarm Alarm Instant Silent Panic Alarm 24H Panic Instant Instant Panic Panic Alarm Alarm Instant Panic Alarm Instant Panic Alarm Instant Panic Alarm 24H Emergency Instant Instant Instant Instant Instant Instant Emergency Emergency Emergency Emergency Emergency Emergency Alarm Alarm Alarm Alarm Alarm Instant Silent Panic Alarm Instant Panic Alarm Alarm Instant Silent Emergency Alarm Instant Silent Emergency Alarm Instant Silent Instant Silent Instant Silent Emergency Emergency Emergency Alarm Alarm Alarm Instant Silent Emergency Alarm See 10.4. Appendix Fire Verification Trigger Scene Number Trigger Scene Number Trigger Scene Number Trigger Scene Number Trigger Scene Number Trigger Scene Number 24H Emergency
(Quiet) 24H Fire with Verification Trigger Scene
<NOTE>
Delayed Burglar Alarm reponse means the Control Panel will wait for the Entry Time to expire. If the Enty Time expires without disarming the system, the Control Panel will activate a Burglar Alarm after Entry Time expiry. Silent Panic Alarm, Silent Emergency Alarm and "Burglar Outdoor Alarm does not activate any audible alarm. The Control Panel will report the alarm event silently without any warning sound. 82 10.3. Cross Zone Verification Cross Zone Verification is use to setup cross verification for intrusion sensors. To use Cross Zone Verification, the following sensor and panel setting must be adjusted:
1 At least 1 intrusion sensor must be set to Cross Zone attribute. 2 The Cross Zone Timer option under Panel Setting webpage must be enabled. Cross Zone Verification Rule Cross Zone function does not activate under Exit and Entry Time. When a sensor set to Cross Zone attribute is triggered, the panel begins to sound alarm, counts down Cross Zone Timer and reports a Cross Zone First Trip event (CID 693). If the Cross Zone Timer expires without any other sensor trigger, the panel reports Cross Zone Trouble event (CID 378) when the timer expires. If the same sensor is triggered again during Cross Zone Timers, the Cross Zone Timer is reset and extended. If another sensor is triggered during the timer:
The Panel report Burglar (CID 130) for both sensors. If the newly triggered sensor is set to Cross Zone attribute, the Panel also report Burglar Verified (CID 139) for this sensor. The Cross Zone Timer is reset and extended. When the Cross Zone Timer expires, the panel reports Cross Zone Timeout (CID 694). 10.4. Fire Verification Fire Verification is use to setup verification for Smoke Detector. To use Fire Verification, the following sensor and panel setting must be adjusted:
1 At least 1 Smoke Detector must be set to 24 HR Fire with Verification attribute. 2 The Fire Verification Timer option under Panel Setting webpage must be enabled. Fire Verification Rule When a Smoke Detector set to Fire Verification attribute is triggered, the panel begins to sound alarm, counts down Fire Verification Timer and reports a Near Alarm event (CID 118). Triggering any Smoke Detector with Fire Verification attribute (including the original Some Detector) during Fire Verification Timer will prompt panel to report Smoke Alarm event (CID 111), the timer will be reset and extended. Triggering a regular Smoke Detector with Smoke attribute during the Fire Verification Timer will prompt panel to report Smoke Alarm event (CID 111), the timer will not be When the Fire Verification Timer expires, the panel reports Fire Verification Timeout reset.. event (CID 695). 83 10.5. Contact-ID Protocol & Format Where ACCT MT QXYZ GG C1C2C3 ACCT
= 4 Digit Account number (0-9, B-F)
= Message Type, 18H.
= Event qualifier, which gives specific event information:
XYZ
= Event code (3 Hex digits 0-9, B-F)
= Group, Partition number (00H), or Area Number
- 00 = panel
- 01= area 1.....xx= area xx MT Q GG
= 1. For devices: zone C1C2C3 = Zone number 001, Zone 1 002, Zone 2
.. XXX Zone XXX 2. For Panel: code C1C2C3 =
User PIN Code 1 User PIN Code 2 User PIN Code 3 User PIN Code 4 User PIN Code 5 User PIN Code 6 Temporary Code Duress Code 001 002 003 004 005 006 997 998 000= Control Panel C1C2C3 84 10.6. Event Code 100 Medical When a device set to Medical attribute is triggered. 101 Personal emergency When a device set to Personal Emergency attribute is triggered. 110 Fire 111 Smoke When a device set to Fire attribute is triggered. When the Smoke Detector (SD) set to Smoke Alarm is triggered. When the Smoke Detector (SD) set to Fire Verification verifies an alarm during Fire Verification Time. 118 Near Alarm 120 Panic 121 Duress 122 Silent Panic 130 Burglar Home Arm mode. 131 Burglar Perimeter 132 Burglar Interior When the Smoke Detector (SD) set to Fire Verification is triggered. When a device set to Panic attribute is pressed. When the Duress Code is entered to disarm or arm the system. When a device set to Silent Panic is pressed. Whenever a device set as Burglar Instant is triggered. Whenever a device set as Burglar Instant is triggered under Disarm, Full Arm or When a device set as Entry is triggered in Full Arm mode. When a device set as Burglar Follow is triggered during Full Arm Entry Time and the system is not disarmed before entry time expiry. When a device set at Entry is triggered in Home Arm mode. When a device set as Burglar Follow is triggered during Home Arm Entry Time and the system is not disarmed before entry time expiry. 136 Burglar Outdoor Whenever a device set at Burglar Outdoor is triggered. 137 Panel Tamper/ Panel Tamper Restore When the panels tamper protection is triggered. When the panels tamper function is restored. 139 Burglar Verified. When a sensor set to Cross Zone attribute verifies an alarm. 147 Sensor Supervision Failure/ Sensor Supervision Restore When the panel fails to receive supervision signal from a device within preset 85 supervision timer. 154 Water leakage When the panel receives signal again from sensor that previously failed supervision. When the Water Sensor connected to Door Contact set at Water (@W) is triggered. 158 High Temperature Alarm When high temperature alarm is triggered. 159 Low Temperature Alarm When low temperature alarm is triggered. 162 CO Alarm 170 High Power Consumption When high power consumption alarm is triggered. 171 High Humidity Alarm When high humidity alarm is triggered. 172 Low Humidity Alarm When low humidity alarm is triggered. 301 AC Failure/ AC Power Restore When the AC power fails for more than 10 sec. Restore from AC power failure. 302 Low battery/ Battery Normal When the battery voltage of the Panel is low. When the panel battery restores voltage. 311 Battery Disconnection/ Battery Reconnected 344 Interference/ Interference problem solved 358 Network Cable Unplugged When the Ethernet cable is disconnected. 374 Force Arm When the system is armed with existing fault events 693 Cross Zone Trouble When Cross Zone Timer expires without alarm verification. 380 Device AC Failure When an AC power device loses AC power connection. 383 Sensor Tamper/ Sensor Tamper Restore When any sensors tamper protection is triggered. When the sensors tamper function is restored. 384 Sensor Low battery/ Sensor Battery Normal When a device detects low battery voltage. When a devices low battery condition is restored. 400 Arm/Disarm (by Remote Controller) When the system is armed or disarmed by using the Remote Controller. 86 401 Remote Arm/Disarm When the system is armed or disarmed by SMS message or web access 407 Disarm/Away Arm/Home Arm by Remote Keypad 408 Set/Unset Arm/Disarm When the DC set at Set/Unset is triggered. 456 - Partial Arm When partially arm the system from Disarm to Home arm 570 Device out of order/Door Contact Not Closed When arm fault type is set as Direct Arm, any device is out of order after the preset exit When arm fault type is set as Direct Arm, Door Contact is not closed after the preset delay time is reached. exit delay time is reached. 602 Periodic test report When the control panel makes periodic Check-in reporting. 616 Call Request When the service call is activated by VST-809. 693 Cross Zone First Trip When a sensor set to Cross Zone is triggered to start Cross Zone Timers. 694 Cross Zone Timeout When Cross Zone Timer expires after the alarm has been verified. 695 Fire Verification Timeout When Fire Verification Timer expires. 87 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 88
1 2 3 4 | ID Label/Location Info | ID Label/Location Info | 16.10 KiB | November 01 2023 / November 02 2023 |
Model: HSGW-G8 FCC ID : GX9HSGWF1919 THIS DEVICE COMPLIES WITH PART 15, 22, 24, 27 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICEMAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Made in Taiwan CLIMAX TECHNOLOGY CO., LTD. On the back of product
1 2 3 4 | Attestation Statements | Attestation Statements | 45.25 KiB | November 01 2023 / November 02 2023 |
Covered list attestation FCC application letter Kiwa RF_755_02 Page 1 of 2 15-02-2023 Climax Technology Co Ltd Certification Application Attestation Statements Climax Technology Co Ltd No. 258, Sinhu 2nd Rd., Neihu District Taipei City 114 Taiwan Subject: FCC ID: GX9HSGWF1919 To Whom It May Concern:
Statement for 47 CFR section 2.911(d)(5)(i)
[Climax Technology Co Ltd] certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>
Statement for 47 CFR section 2.911(d)(5)(ii)
[Climax Technology Co Ltd] (the applicant) certifies that, as of the date of the filing of this application, the applicant
- is /
- is not (3) identified on the Covered List as an entity producing covered equipment. Date:
City:
Name(2) :
Function:
Telephone number:
Email address:
Signature:
2023-10-03 Taipei City George Lin Hardware Engineer
+886-2-2794-0001 george@climax.com.tw 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist .
(2): For FCC it must be the Grantee Code owner or the authorized agent.
(3): double click on the appropriate box and select checked then OK
1 2 3 4 | Authorization letter | Cover Letter(s) | 27.02 KiB | November 01 2023 / November 02 2023 |
RF_160_05 Declaration of Authorisation Date of issue 02-01-2023
(On manufacturers company letter heading) Declaration of Authorization We Name:
Address:
City:
Country:
Declare that:
CLIMAX TECHNOLOGY CO., LTD. No. 258, Sinhu 2nd Rd., Neihu District, Taipei City 114, Taiwan ( R.O.C.) Name Representative of agent:
Agent Company name:
Address:
City:
Country Chieh Tseng Worldwide Testing Services (Taiwan) Co., Ltd. 6F., No. 58, Lane 188, Ruey Kuang Road, Neihu Dist., Taipei City 114, Taiwan is authorized to apply for Certification of the following product(s):
Product description: Smart Home Alarm System Type designation: HSGW-G8 Trademark:
Validity/ expiry date N/A on our behalf. Date:
City:
Name:
2023-10-03 Taipei City George Lin Function:
Hardware Engineer Signature:
Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 2 3 4 | Class II Change Request Letter | Cover Letter(s) | 113.61 KiB | November 01 2023 / November 02 2023 |
CLIMAX TECHNOLOGY CO., LTD. No. 258, Sinhu 2nd Rd., Neihu District, Taipei City 114, Taiwan ( R.O.C.) FCC Class II Permissive Change Request Letter Date: 2023/10/03 To FCC:
FCC Permissive II Change Request for Company: CLIMAX TECHNOLOGY CO., LTD. FCC ID: GX9HSGWF1919 We are submitting an application for a class II permissive change to the FCC approval of the Company name:
CLIMAX TECHNOLOGY CO., LTD., product description: Smart Home Alarm System (FCC: GX9HSGWF1919, Original Grant Date: 2020/08/25). The transmitter module itself has not changed. Here are the change:
1. This case is class II change. 2. The difference is the 919M module. Sincerely, Title: Hardware Engineer Name: George Lin Address: No. 258, Sinhu 2nd Rd., Neihu District, Taipei City 114, Taiwan ( R.O.C.) Signature:
1 2 3 4 | Confidentiality | Cover Letter(s) | 34.18 KiB | November 01 2023 / November 02 2023 |
FCC, Request for non-disclosure RF_501, Issue 10 Date: 02-01-2022 Company Name: CLIMAX TECHNOLOGY CO., LTD. Address:
City:
Country:
No. 258, Sinhu 2nd Rd., Neihu District, Taipei City 114, Taiwan ( R.O.C.) To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: GX9HSGWF1919 Reference number: ######
Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):
Internal Photos Users Manual Test Set-up Photos External Photos Justification:
Date: 2023-10-03 Name and signature of applicant: George Lin Notes:
1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!
The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period
1 2 3 4 | US Agent Letter | Attestation Statements | 41.98 KiB | November 01 2023 / November 02 2023 |
Agent letter FCC attestation statement Kiwa RF_753, Issue 2 Page 1 of 2 15-02-2023 Climax Technology Co Ltd U.S. Agent Designation for Service of Process
(Applicant and U.S. Agent are Separate Parties) TO:
Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Climax IntI Corp. 0033602137 Company name:
FRN:
Contact person name: George Lin (& Shirley Wang) Street address:
ZIP/City/State Telephone number:
Email address:
5661 Palmer Way, Ste K Carlsbad, CA 92010 760-476-1978 George@climax.com.tw minmin.wang@climaxsandiego.com Signature:
Date:
2023-10-03 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-
related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Climax Technology Co Ltd GX9 Applicant Company name:
Grantee Code:
Contact person name: George Lin Street address:
ZIP/City/State Telephone number:
Email address:
Signature:
Date:
No. 258, Sinhu 2nd Rd., Neihu District Taipei City 114
+886-2-2794-0001 george@climax.com.tw 2023-10-03
1 2 3 4 | Confidentiality Request | Cover Letter(s) | 24.93 KiB | August 25 2020 |
Date: 2020-08-11 CLIMAX TECHNOLOGY CO., LTD. No. 258, Sinhu 2nd Rd., Neihu District, Taipei City 114, Taiwan ( R.O.C.) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Long-Term Confidentiality Company name: CLIMAX TECHNOLOGY CO., LTD. FCC ID: GX9HSGWF1919 FCC Part 15 Certification To whom it may concern:
In accordance with 0.457(d) and 0.459 of CFR 47, CLIMAX TECHNOLOGY CO., LTD. hereby requests Long-Term confidentiality of all Block Diagrams, Schematics, Operational Description attachments for the subject application. These documents contain detailed system and equipment description and related information about the product which CLIMAX TECHNOLOGY CO., LTD. considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, CLIMAX TECHNOLOGY CO., LTD. considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Signature Name: George Lin Title: Hardware Engineer Company: CLIMAX TECHNOLOGY CO., LTD.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-11-02 | 2502.5 ~ 2567.5 | PCB - PCS Licensed Transmitter | Class II Permissive Change |
2 | 918.0375 ~ 924.48 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 2020-08-25 | 918.0375 ~ 924.48 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
4 | 2502.5 ~ 2567.5 | PCB - PCS Licensed Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2023-11-02
|
||||
1 2 3 4 |
2020-08-25
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
Climax Technology Co Ltd
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0021168695
|
||||
1 2 3 4 | Physical Address |
No. 258, Sinhu 2nd Rd., Neihu District
|
||||
1 2 3 4 |
Taipei City, N/A
|
|||||
1 2 3 4 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 3 4 |
J******@eurofins.de
|
|||||
1 2 3 4 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 4 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
GX9
|
||||
1 2 3 4 | Equipment Product Code |
HSGWF1919
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
G******** L********
|
||||
1 2 3 4 | Title |
Hardware Engineer
|
||||
1 2 3 4 | Telephone Number |
886-2********
|
||||
1 2 3 4 | Fax Number |
886-2********
|
||||
1 2 3 4 |
g******@climax.com.tw
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 2 3 4 | Name |
K**** W****
|
||||
1 2 3 4 |
D******** S********
|
|||||
1 2 3 4 | Physical Address |
6F., No.58, Lane 188, Ruey Kuand Rd.
|
||||
1 2 3 4 |
6F., No.58, Lane 188, Ruiguang Rd., Neihu District
|
|||||
1 2 3 4 |
Taipei, 114
|
|||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
+8862********
|
||||
1 2 3 4 | Fax Number |
886-6********
|
||||
1 2 3 4 |
88626********
|
|||||
1 2 3 4 |
r******@wts-lab.com
|
|||||
1 2 3 4 |
d******@wts-lab.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 4 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 2 3 4 | Name |
C****** T******
|
||||
1 2 3 4 | Physical Address |
6F., No.58, Lane 188, Ruey Kuand Rd.
|
||||
1 2 3 4 |
Taiwan
|
|||||
1 2 3 4 | Telephone Number |
+8862********
|
||||
1 2 3 4 | Fax Number |
886-6********
|
||||
1 2 3 4 |
c******@wts-lab.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart Home Alarm System | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Class II permissive change. The change is change 919M module. Output power listed is ERP for Part 22 and Part 27 below 1 GHz, EIRP for Part 24 and Part 27 above 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 4 | Class II permissive change. The change is change 919M module. Ourpur power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 | Output power listed is ERP for Part 22 and Part 27 below 1 GHz, EIRP for Part 24 and Part 27 above 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 2 3 4 | Name |
R******** K****
|
||||
1 2 3 4 |
D******** S********
|
|||||
1 2 3 4 | Telephone Number |
886-2******** Extension:
|
||||
1 2 3 4 | Fax Number |
886-2********
|
||||
1 2 3 4 |
886-2********
|
|||||
1 2 3 4 |
r******@wts-lab.com
|
|||||
1 2 3 4 |
d******@wts-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.2 | 848.8 | 1.4622 | 0.045 ppm | 245KF9W | ||||||||||||||||||||||||||||||||||
1 | 2 | 24E | 1850.2 | 1909.8 | 0.6026 | 0.049 ppm | 247KF9W | ||||||||||||||||||||||||||||||||||
1 | 3 | 24E | 1852.4 | 1907.6 | 0.2065 | 0.007 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
1 | 4 | 22H | 826.4 | 846.6 | 0.2032 | 0.008 ppm | 4M17F9W | ||||||||||||||||||||||||||||||||||
1 | 5 | 24E | 1850.7 | 1909.3 | 0.2023 | 0.005 ppm | 18M5G7D | ||||||||||||||||||||||||||||||||||
1 | 6 | 24E | 1850.7 | 1909.3 | 0.1503 | 0.005 ppm | 18M5W7D | ||||||||||||||||||||||||||||||||||
1 | 7 | 27 | 1710.7 | 1754.3 | 0.1986 | 0.005 ppm | 18M3G7D | ||||||||||||||||||||||||||||||||||
1 | 8 | 27 | 1710.7 | 1754.3 | 0.151 | 0.005 ppm | 18M3W7D | ||||||||||||||||||||||||||||||||||
1 | 9 | 27 | 2502.5 | 2567.5 | 0.1581 | 0.009 ppm | 18M4G7D | ||||||||||||||||||||||||||||||||||
1 | 1 | 27 | 2502.5 | 2567.5 | 0.1127 | 0.009 ppm | 18M4W7D | ||||||||||||||||||||||||||||||||||
1 | 11 | 27 | 704.5 | 746.5 | 0.2333 | 0.006 ppm | 18M6G7D | ||||||||||||||||||||||||||||||||||
1 | 12 | 27 | 704.5 | 746.5 | 0.2037 | 0.006 ppm | 18M6W7D | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 918.03750000 | 924.48000000 | 0.0134000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 918.03750000 | 924.48000000 | 0.0134000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 22H | 824.2 | 848.8 | 1.4622 | 0.045 ppm | 245KF9W | ||||||||||||||||||||||||||||||||||
4 | 2 | 24E | 1850.2 | 1909.8 | 0.6026 | 0.049 ppm | 247KF9W | ||||||||||||||||||||||||||||||||||
4 | 3 | 24E | 1852.4 | 1907.6 | 0.2065 | 0.007 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
4 | 4 | 22H | 826.4 | 846.6 | 0.2032 | 0.008 ppm | 4M17F9W | ||||||||||||||||||||||||||||||||||
4 | 5 | 24E | 1850.7 | 1909.3 | 0.2023 | 0.005 ppm | 18M5G7D | ||||||||||||||||||||||||||||||||||
4 | 6 | 24E | 1850.7 | 1909.3 | 0.1503 | 0.005 ppm | 18M5W7D | ||||||||||||||||||||||||||||||||||
4 | 7 | 27 | 1710.7 | 1754.3 | 0.1986 | 0.005 ppm | 18M3G7D | ||||||||||||||||||||||||||||||||||
4 | 8 | 27 | 1710.7 | 1754.3 | 0.151 | 0.005 ppm | 18M3W7D | ||||||||||||||||||||||||||||||||||
4 | 9 | 27 | 2502.5 | 2567.5 | 0.1581 | 0.009 ppm | 18M4G7D | ||||||||||||||||||||||||||||||||||
4 | 1 | 27 | 2502.5 | 2567.5 | 0.1127 | 0.009 ppm | 18M4W7D | ||||||||||||||||||||||||||||||||||
4 | 11 | 27 | 704.5 | 746.5 | 0.2333 | 0.006 ppm | 18M6G7D | ||||||||||||||||||||||||||||||||||
4 | 12 | 27 | 704.5 | 746.5 | 0.2307 | 0.006 ppm | 18M6W7D |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC