FCC ID: KR5MIS-I Identification System

The MOBY STG" Program R 03.00 4.2.5 Reading the ID Number Only MOBY E, MOBY F: The function reads and indicates the serial number of the MDS. The ID number is set at the factory and cannot be changed. The TaglD is displayed in hexadecimal format by the editor in the second line. The TagID is automatically read with the "MDS read/write/erase functions. 4.2.6 Reading Raw Data Only MOBY E, MOBY F: This function is used to physically read the entire memory of the MDS. This includes tag ID, key information (if public), manufac-

turers information and MDS access rights. A knowledge of the physical layout of the MDS memory is required to interpret the data. See description of MFWAPI or CCTWAPI. The read raw data function can be used to detect errors made when the MDS was configured. Note for MOBY F MDS addresses 8 to 3F hex (i.e., pages 2 to 15) cannot be read. They are always shown by the editor as 00. STG Hand-Held Terminal E-14 (5)J31069-D0126-U001-A2-7418 FR 03.00 4.3 4.3.1 A file ca

* saved

* transf chapt 4.3.2 Data cur PSION. storage |

name, <

A memo minal for read anc 4.3.3 The exi gives yo!

nal. See STG Han

(5)J3106:

The "FILEHANDLER" Program Rf 03.00 5.7.2. Password for Filehandler (Password for FH) The filehandler password protects the STG data on the MDS from being mani-

pulated by unauthorized parties. The passwords for the Filehandler and MOBY STG programs are identical. See chapter 4.5.2 for a description of how to handle the password. 5.7.3 Communication In principle, communication of the filehandler is always set to read head."

However, the filehandier can be changed to ASM on RS 232" as an option. A type ASM420-RS232" module can then be connected to the hand-held termi-

nal, For more information, see chapter 6.6. Remember that a type ASM 421 module cannot be used with the STG. 5.8 The ? Functions These functions are the same as those of the "MOBY STG" program. See chapter 4.6. STG Hand-Held Terminal E-34 (5)J31069-D0126-U001-A2-7418 FR 03.00 Expanded Functions 6 Expanded Functions 6.1. Storing the MDS Data on the Hand-Held Terminal The data read from the MDS are automatically stored on the hand-held terminal in a file named "READ_E.HEX, "READ_F.HEX" or READ_I.HEX on the RAMDRIVE" drive of the PSION. Every additional read command overwrites this file. When the MDS is write-accessed, the write data are written from the editor to the MDS and also to the RAMDRIVE (M:) drive of the PSION under the name WRITE_E.HEX, WRITE_F.HEX or WRITE_I.HEX. Every additional write com-

mand overwrites this file, The file/load file function shows all files with the file extension .HEX." You can select one of them. This file is then loaded to the editor. There is no stor-

age under the name READ_x.HEX or WRITE_x.HEX. The file/save function stores the data of the editor in a file with the file exten-

sion .HEX on the RAMDRIVE drive of the PSION (i.e., drive M:). You can specify any name of 1 to 8 alphanumeric characters. Note When you read data from the MDS, modify data in the editor and then save the data, the modified data will be stored in the .HEX file. 6.2 Copying MOBY Data from and to the Hand-

Held Terminal 6.2.1 What Is Needed in Addition?

* The PsiWin program. This is a file manager available from PSION for the PSION Workabout hand-held terminal.

* A link interface with the applicable cable for connecting the PC to the PSION Workabout These components can be ordered directly from PSION. See appendix A.1. STG Hand-Held Terminal

(5)J31069-D0126-U001-A2-7418 E-35