FCC ID: KR5IK4CH-01 Radio Frequency Transmitter (Key Fob)

Continental Automotive France SAS Interior Division- Body & Security Functional Description User Manual of the Continental Radio Frequency Transmitter Model:

IK4CH-01 and IK4PL-01 (433.92 MHz) IK3CH-01 (315 MHz)

-1- Apr. 11, 2017 Continental Automotive France SAS Interior Division- Body & Security Functional description of the IK4CH-01, IK4PL-01, IK3CH-01 key 1 General Product Information This document gives an overview of the different device operation modes and the RF transmissions performance of the key model IK4CH-01, IK4PL-01, IK3CH-01. In this document the device is referenced as "key", even if the mechanical backup key might be separated from it. 1.1 Trade mark Continental 1.2 Brand Continental

-2- Apr. 11, 2017 Continental Automotive France SAS Interior Division- Body & Security 4 Button functions The validation of the accurate frequency deviation and the measurement of the transmission function of the key are implemented based on RF test software. The graphic below shows the functionality of the buttons. Button Lock First Button press Second Button press Third Button press Fourth Button Fifth button press press CW Flow CW Fup Continuous RF data frame CW Fup Stop RF emission

-6- Apr. 11, 2017 Continental Automotive France SAS Interior Division- Body & Security 5 Key fobs Variants Product reference Product variant Drawing IK4PL-01 A2C398083 marking : 04 EdG 433.92MHz Lock/Unlock/Light/Trunk 433.92 MHz IK4CH-01 A2C398080 marking : 02 HdG 433.92MHz Lock/Unlock/Light/Trunk 433.92 MHz

-7- Apr.11, 2017 Continental Automotive France SAS Interior Division- Body & Security IK3CH-01 A2C398081 marking : 01 HdG 315MHz Lock/Unlock/Light/Trunk 315 MHz IK4CH-01 A2C398084 marking : 06 HdG 433.92MHz RES Lock/Unlock/RES/Trunk 433.92 MHz

-8- Apr., 11, 2017 Continental Automotive France SAS Interior Division- Body & Security IK4PL-01 A2C398086 marking : 08 EdG 433.92MHz RES Lock/Unlock/RES/Trunk 433.92 MHz

-9- Apr. 11, 2017 FCC statement 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-

-

-

-

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC statement RSSGenIssue48.4 This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

@ntinentalS TO Federl Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC lD:KR5lK4Cl-{-01 To whom it may concern:

Date: July 10,2019 We, the undersigned, hereby authorize Kevin Tsai/ Deputy Manager of SGS Compliance Certification Services lnc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC lD above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C. S53(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Cerfification, as specified by SGS North America, lnc., still resides with Continental Automotive GmbH. This authorization is valid until further written notice from the applicant, Name @rinted): Dagmar Kolar Title: Type approval employee Signature 4 On behalf of Company: Continental Automotive GmbH Telephone: + 49-941 -7 90-6699

@ntinentalS Federal Communications Commission Authoration and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2019-07-10 SUBJECT FCC Class ll Permissive change for FCC lD: KRSIK4CH:O1 To Whom lt May Concern We, Gontinental Automotive GmbH, would like to request a Class ll Permissive Change for the FCC lD: KRSIK4CH-O1. lt is to add a plastic case to the certified device which was originally granted on 0711412017 under FCC lD: KRS|K4GH-O1. The RF function remains the same with the original application (no change of module and antenna). The consultation to FCC is as the attached, it can be covered per FCC KDB #178919 section F and the conditions. Field strength is higher, apply to require C2PC. Sincerely,

>-elflraat Dagmar Kolar / Type approval employee Gontinental Automotive GmbH Tel: 49-941-790-6699 F ax: 49-94 1-790- 1 36699 E-mail : dagmar. kolar@continental-corporation.com

Report No.: T190701W02 Page: 1 / 19 Rev.: 01 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT Original: Chrome Variant Report No.: T190701W02 Page: 2 / 19 Rev.: 01 Report No.: T190701W02 Page: 3 / 19 Rev.: 01 Additional: Plastic Variant Report No.: T190701W02 Page: 4 / 19 Rev.: 01 Report No.: T190701W02 Page: 5 / 19 Rev.: 01

Report No.: T190701W02 Page: 6 / 19 Rev.: 01 INTERNAL PHOTOGRAPHS OF EUT Original: Chrome Variant Report No.: T190701W02 Page: 7 / 19 Rev.: 01 Report No.: T190701W02 Page: 8 / 19 Rev.: 01 Report No.: T190701W02 Page: 9 / 19 Rev.: 01 Module Antenna Report No.: T190701W02 Page: 10 / 19 Rev.: 01 Report No.: T190701W02 Page: 11 / 19 Rev.: 01 Battery Report No.: T190701W02 Page: 12 / 19 Rev.: 01 Report No.: T190701W02 Page: 13 / 19 Rev.: 01 Additional: Plastic Variant Report No.: T190701W02 Page: 14 / 19 Rev.: 01 Report No.: T190701W02 Page: 15 / 19 Rev.: 01 Report No.: T190701W02 Page: 16 / 19 Rev.: 01 Module & Crytal Report No.: T190701W02 Page: 17 / 19 Rev.: 01 Antenna Report No.: T190701W02 Page: 18 / 19 Rev.: 01 Battery Report No.: T190701W02 Page: 19 / 19 Rev.: 01