FCC ID: KR5FBD5 UWB+BLE CAN Gateway

FCC-ID:KR5FBD5 Continental Automotive GmbH IC:7812D-FBD5 1 Label Information Canada/USA Continental Model: FBD-5 FCC ID:KR5FBD5 IC:7812D-FBD5 CAN RSS-Gen/CNR-Gen 2 Owner Manual 2.1 Owner Manual Canada IC:7812D-FBD5 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. The device is installed in the vehicle with a greater distance than 20 cm to the passengers. L'appareil est install dans le vhicule une distance suprieure 20 cm des passagers. This equipment complies with the RSS-102 limits set forth for an uncontrolled environment.Cet quipement est conforme a RSS-102 limites nonces pour un environnement non contrl. FCC-ID:KR5FBD5 2.2 Owner Manual USA FCC ID:KR5FBD5 Continental Automotive GmbH IC:7812D-FBD5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: this equipment found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by of the following measures:

- Consult the vehicle dealer for help. This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment.

FCC-ID:KR5FBD5 CSA Internal | 3rd Party Continental Automotive GmbH IC:7812D-FBD5 Installation Manual for FBD5 1. How to assembly / mount the module in vehicle Module FBD5 will be fixed with clips in the vehicle chassis. 15 Oct 2020 CSA Internal | 3rd Party Continental Automotive GmbH IC:7812D-FBD5 FCC-ID:KR5FBD5 2. Statement a) User Information gem. FCC 15.21:

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. b) Part 15 Statement gem. FCC 15.19 falls das Statement nicht auf dem Gert steht, weil dieses kleiner als eine Handflche ist) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. c) Statement gem.RSS GEN Issue 5::

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device.. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:(1) Cet appareil ne doit pas causer d'interfrences(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. 15 Oct 2020

FCC-ID:KR5FBD5 FBD5 Label Location CSA Internal | 3rd Party Continental Automotive GmbH IC:7812D-FBD5 Label 2 Label 1 28 Oct 2020

DMC1 BMW 5A29C15-01 MODEL: FBD5 MADE IN GERMANY BMW AG D-80788 A3C04887505 CNCID:XX-XXXXX XXXXXXXXXXXXXX XXXX-XXX-XXX-XXXX IFETEL.RXXXXXXXX-XXXX FBD5 Label 1 A450+ OCR-B 10 BT DMC2 CONTINENTAL AUTOMOTIVE GMBH - SIEMENSSTRASSE 12 93055 REGENSBURG GERMANY MODEL NO.:A3C04887505 FBD5 CMIIT ID:XXXXXXXXXX FCC ID: KR5FBD5 IC: 7812D-FBD5 CERTIFICATE SEE DMC SEE OWNERS MANUAL FBD5 Label 2 A450+ OCR-B 10 BT

CSA Internal | 3rd Party Authority to Act as Agent Date: November 18, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

CSA Group Bayern GmbH, Ms. Christa Jaeger is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, This authorization is valid until further written notice from Continental Automotive GmbH By:

Title:

On behalf of: Continental Automotive GmbH Telephone:

Type Approval Manager

+49 941 790 6699 Dagmar Kolar 053019 12 THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD CSA Internal | 3rd Party 053019 12

CSA Internal | 3rd Party Request for Confidentiality Date: October 06, 2020 Subject: Confidentiality Request for FCC ID: KR5FBD5 and IC: 7812D-FBD5 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Continental Automotive GmbH has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title3) Dagmar Kolar Type Approval Manager 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.