|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2016-08-30
|
|
1 2 3 4 5 6 7 8 9
|
2015-10-12
|
|
1 2 3 4 5 6 7 8 9
|
2015-06-02
|
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Coppernic
|
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0018841726
|
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
185 avenue Archimede
|
|
1 2 3 4 5 6 7 8 9
|
Aix en Provence, 13857
|
|
1 2 3 4 5 6 7 8 9
|
France
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
|
1 2 3 4 5 6 7 8 9
|
t******@timcoengr.com
|
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
XGK
|
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
211486030B
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8 9
|
Name |
M**** P****
|
|
1 2 3 4 5 6 7 8 9
|
Title |
Director of Engineering
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
00334********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
00334********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
m******@coppernic.fr
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 9 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 9 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | BT/WiFi module |
| 1 2 3 4 5 6 7 8 9 | Bluetooth & Wi-Fi device |
| 1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 3 4 5 6 7 8 9 | Does not apply |
| 1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 8 9 | Change in identification of presently authorized equipment. Original FCC ID: UZ7211486030B Grant Date: 04/16/2012 |
| 1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 9 | Yes |
| 1 2 3 4 5 6 7 8 9 | Grant Comments | Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012).
Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and extremities exposure conditions are 0.14 W/kg and 0.28 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012).
Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and extremities exposure conditions are 0.17 W/kg and 1.46 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012).
Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and extremity (hand) exposure conditions are 0.14 W/kg and 0.22 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and extremity (hand) exposure conditions are 0.15 W/kg and 0.84 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Limited Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. |
| 1 2 3 4 5 6 7 8 9 | Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.39 W/kg and 0.42 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012)
Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.30 W/kg and 0.33 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
EMITECH Angers
|
|
1 2 3 4 5 6 7 8 9
|
CTC advanced GmbH (former CETECOM ICT Services )
|
|
1 2 3 4 5 6 7 8 9
|
EMITECH Montpellier
|
|
1 2 3 4 5 6 7 8 9
|
Name |
O**** R********
|
|
1 2 3 4 5 6 7 8 9
|
G******** S****
|
|
1 2 3 4 5 6 7 8 9
|
O****** H****
|
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
33-2-********
|
|
1 2 3 4 5 6 7 8 9
|
49-68********
|
|
1 2 3 4 5 6 7 8 9
|
33-4-********
|
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
33-2-********
|
|
1 2 3 4 5 6 7 8 9
|
49-68********
|
|
1 2 3 4 5 6 7 8 9
|
33-4-********
|
|
1 2 3 4 5 6 7 8 9
|
E-mail |
o******@emitech.fr
|
|
1 2 3 4 5 6 7 8 9
|
t******@ctcadvanced.com
|
|
1 2 3 4 5 6 7 8 9
|
o******@emitech.fr
|
|