FCC ID: KA2WM221B1 4G LTE USB ADAPTER

DWM-221 User Manual Index LTE USB Adapter Introduction

....................................... 2 Internet service

.............................................................. 5 SMS service

.................................................................... 6 Contacts

....................................................................... 10 USSD

............................................................................. 13 STATISTICS

.................................................................... 14 Settings

........................................................................ 15 FAQs

............................................................................. 20 LTE USB ADAPTER INTRODUCTION 1. To launch the Network Connect, double-click the shortcut icon on the desktop. It should be noted that:

If the PIN code enabled, enter the correct one, then click OK. The (U)SIM will be locked after three retries of incorrect PIN code inputting;

Enter the correct PUK to retrieve the default PIN code. After ten retries of incorrect PUK code inputting, please contact with your service provider;

With the wrong PIN and PUK, all the network services are unavailable. 2. Main interface introduction

: Connection

: Access to the Text Message

: Access to the Phonebook interface

: Access to USSD

: Access to check usage statistics

: Set parameters options

: Help (User Manual) 3. Status information Status Description New message New message(s) arrived. Message full Indicates the (U)SIMs storage of SMS is full. No device Indicates that system cannot find the device. Initializing Indicates that the device is in the process of initializing. Searching The device is searching for the network. No service No suitable network. No (U)SIM card

(U)SIM card not inserted or the device cannot recognized the (U)SIM. Invalid (U)SIM card The (U)SIM is out of service. Network signal Network type Indicate the signal strength of the network. GSM/GPRS, UMTS, LTE Data service EDGE available, HSUPA available, HSPA+ available. 4. LED Indicator description State of LED indicator Description RED Solid On No SIM card/ Error Green Solid On Register to network (not connect) Green blinking Connected to network

*Green blinking: Flash once every 0.5 seconds) INTERNET SERVICE 1. Connecting with the default connection profile Click to set up the connection;

2. Statistics information The following window will be displayed at lower right corner of main interface when connecting to the internet. 3. Disconnect from the internet Click connection. to disconnect the internet SMS SERVICE Click to enter SMS (Short Message Service) service interface. 1. Creating and sending a message. Click

Input the recipient number by one of the following options:

Enter the number directly;

Click Send to, choose the recipient number from the phonebook and add to the sending list, then click OK. Enter the message content;

Click Send or Save to Draft. The message will be saved in the Draft when failed to send. You can group send a message at most 100 recipients;

Each number should be separated by ,;

Note:

The message cannot expand 1,530 characters at most. 2. Inbox The following prompt box will be displayed when received a new message;

Note:

: Access the edit interface, write the content, Reply click Send or Save to Draft;

Forward

: Forward the selected message;

Delete

: Delete the selected message. The new message will be saved in PC when Connection Manager running only, else in (U)SIM instead;

You can use Shift or Ctrl to selected several messages;

3. Outbox The message in the Outbox can be deleted or forwarded. 4. Draft The MSG sent unsuccessfully will be saved in the Draft. Click the selected message;

Confirm the recipient and the content, and click Send or Save to Draft. 5. Recycle All deleted information will be saved in the Recycle. 6. The selected SMS can be operated as follows:

Save number:

To save the senders information to the (U)SIM card or PC. Delete text message: To delete the selected message. Move to:

To move the selected message to Outbox or Draft. Copy to:

To copy the selected message to Outbox or Draft. SMS Export Right-click the selected the message;

Click SMS Export ;

Specify the path and the file name, and click Save. Note: The exported message will be saved as a *.csv file. CONTACTS Click to enter Contacts interface. 1. New Click

Enter the Name and Mobile, and save it in the (U)SIM card or PC. 2. Searching a contact Click

Enter the key characters of you want to find in the

The result will be displayed in turn. 3. Viewing a contact Click Local or (U)SIM to display the contacts interface accordingly;

Select a contact, then you can operate as follows:

Edit

: Modify the selected contact;

Delete

: Delete the selected contact;

Send SMS contact;

: Send a message to the selected Copy to: Copy the contact between (U)SIM card and PC. Note: The deleted contact information cannot be retrieved. 4. Import Right-click the mouse;

Click Contacts Import;

Select the *.vcf or *.csv file and click Open;

The import file will be saved in the current interface. 5. Export Right-click the selected contact;

Click Contacts Export;

You can saved the contact file as *.csv file or *.vcf file;

Confirm the name and the path the file saved, then click Save. USSD Click to enter USSD interface. You can add, edit, delete, and send USSD operation. The result of sending will display on the edit box. STATISTICS Click to enter STATISTICS interface. View various connection statistics. SETTINGS Click to list the functions. 1. PIN Management Enable PIN Click Enable PIN;

Enter the correct PIN code and click OK. Note: The PIN code should be a numeric string of 4-8 digits. Disable PIN Click Disable PIN;

Enter the correct PIN code and click OK. Modify PIN Click Modify PIN;

Enter the old PIN code and new PIN code, confirm the new PIN code and click OK. 2. Options (also can use

) General You may choose the alert tone when connected/disconnected to the internet. Text Message Setting You may active the message alert tone, and also can set up your favorite tone via selecting a *.wav file in the PC. The number showed in the SMS center is read from the (U)SIM card automatically; modification is not recommended;

Note: SMS would not work with the wrong SMSC. Contact with the service provider to get the correct SMSC. You may select the period in the drop-box, it specifies the validity which the message would save in the network;

Note: The validity setting of SMS should be supported by the network. Profile Management Click the shortcut button, you can enter Profile Management page to set APN information. Network Network Type You can choose Auto or Only LTE or Only UMTS/HSPA or Only GPRS/EDGE. The device will register network according to the selected mode. The default mode is Auto. Registration Mode Auto search and register is set as default value;

Select Manual search and register before dialing, available networks will be listed when finished;

Select an available network and click Register, and then the device will try to register. Statistics You can get the statistics of daily/weekly/monthly/yearly report on downloading/uploading/connection time Diagnostics You can view device information, Operator information, network status and so on information. Language Selection You can choose the different language UI. 3. Contacts Import For more details, refer to Internet Contacts-4. 4. Contacts Export For more details, refer to Internet Contacts-5. 5. SMS Export For more details, refer to Internet Text Message-5. 6. Help &About Help: To open the User Manual About: To get the Connection Manager information. 7. Show Menu Bar You can display/not display the Menu Bar FAQS 1. Q: What shall I do if I cannot connect to the internet?

Setting and check the Profile is correct to A: Checking match the (U)SIM card operator. If not, can manual to enter the APN information to connect to the internet. 2. Q: Why cant I receive the message?

A: Please confirm whether the (U)SIMs SMS memory is full or not. 3. Q: Why the software doesnt run automatically when the device is plugged in?

A: Click My computer->data card disk->StartModem.exe. Or run the Connection Manager from Start of the OS if D-Link Connection Manager was installed.

WARRANTY &

SAFETY INFORMATION LIMITED PRODUCT WARRANTY For better service, please register your product online at http://register.dlink.com COUNTRIES IN WHICH D-LINK LIMITED WARRANTY APPLIES The Limited Warranty terms herein apply to countries in Asia, Oceania, Latin America and Africa, with exception to following countries, a. For Estonia, Latvia, Lithuania, Israel and Turkey, the general warranty period shall be two (2) years. b. For Russia, Ukraine, Belarus, Kazakhstan, Uzbekistan, Armenia, Azerbaijan, Moldova, Turkmenistan, Tajikistan and Kyrgyzstan, please refer to the last pages of this hardcopy warranty booklet in Russian. c. For Mongolia, please refer to the detail warranty in English at www.dlink.ru/mn. d. For the countries above, the Limited Lifetime Warranty information of DFL series firewalls, managed and smart switches can be seen at www.dlink.ru. For a detailed country list, please see D-Link website http://warranty.dlink. com. For the countries not on the list, please refer to local D-Link websites. LIMITED HARDWARE WARRANTY D-Link provides Limited Warranty for its product only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor. D-Link will fulfill the warranty obligations according to the local warranty policy of the country where you purchased your D-Link product. The warranty period starts on the date of purchase from D-Link or its authorized reseller or distributor. You may be required to provide a proof of purchase as a condition of receiving a warranty service. Your sales or delivery receipt, showing the date of purchase of the product, is your proof of purchase. You are entitled to warranty service if required within the warranty period under the terms and conditions of this document. Warranty Period Table The warranty periods stated in this table supersede and replace the warranty periods stated in the users manuals for relevant products. Product Type Unmanaged Switch:

DES-1008F/1008P/1016D/1018DG/1024D, DES-1026G/1048/1050G, DGS-1016D/1024D EasySmart Switch:

DES-1100 series Web Smart Switch:

DES-1200/1210 series, DGS-1200/1210 series Entry-Level Managed Switch:

DES-3000 series, DGS-3100 series, DES-3028/3028P/3052/3052P X-STACK Managed Switch:

DGS-3200/3400/3420/3600/3620 series, DES-3500/3528/3552/3800/3810 series, DES-3200-10/16/26/28 Unified Wired/Wireless Switch:

DWS-3000/4000 series Switch Expansion Module:

DEM-201F/201FL/301G/301T/410X/410CX Unified Wireless AP DWL-3500AP/8500AP/8600AP AirPremier Wireless AP DWL-2100AP/2200AP/3140AP/3200AP/270 0AP, DWL-3260AP/7100AP/8200AP/7700AP, DAP-3220 AirPremier N Wireless AP DAP-1353/2553/2590/2690/3520/3690 NetDefend IPS Firewall DFL-210/800/1600/2500 NetDefend UTM Firewall DFL-160/260/260E/860/860E/1660/2560/2560G VPN Firewall DSR-1000N, DSR-500N Chassis Based Switch DES-7200/6500 series Warranty Period Limited Lifetime Warranty a. The listed products are covered under warranty for five (5) years after the product is discontinued. b. Internal fans and internal power supplies are included. c. External power supplies are excluded. d. Limited Lifetime Warranty covers the listed products purchased on or after Oct. 1, 2009. e. Please register your D-Link product online at http://

register.dlink.com within thirty (30) days of purchase. LIMITED SOFTWARE WARRANTY D-Link warrants that the software portion of the product (Software) will substantially conform to its then current functional specifications from the date of original delivery for a period of ninety (90) days, if properly installed and operated on approved hardware. D-Links sole obligation shall be to replace the non-conforming Software. The replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link. The warranty period shall extend for an additional ninety (90) days after any replacement Software is delivered. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee will be refunded, provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. WHAT YOU MUST DO FOR WARRANTY SERVICE Any claim under this limited warranty must be submitted in writing before the end of the warranty period to a Service Office with a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. The original product owner must obtain a Return Material Authorization

(RMA) number from the Service Office and, if requested, provide written proof of purchase. After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to avoid damage in transit with RMA number prominently marked outside the package. The packaged product shall be insured and shipped to a Service Office with shipping costs prepaid. D-Link may reject or return any product not packaged and shipped in strict compliance with foregoing requirements, or for which an RMA number not visible outside the package. The product owner agrees to pay reasonable handling and return shipping charges for product not packaged and shipped in accordance with foregoing requirements, or that determined by D-Link not to be defective or non-conforming. WHAT IS NOT COVERED The limited warranty provided by D-Link does not cover:

Products that have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed;

damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; and any hardware, software, firmware or other products or services provided by anyone other than D-Link or any Service Office. DISCLAIMER Two (2) years*

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED AS-IS WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. Software, spare parts and spare kits Ninety (90) days*

LIMITATION OF LIABILITY All other products

(including, but not limited to, D-Link consumer-

class products) One (1) year*

*Some countries may have special warranty periods longer than stated above. Please check local D-Link websites. IMPORTANT:

The content of Product Type listed above is subject to change;

please refer to the website http://warranty.dlink.com for the latest updates. LIMITED HARDWARE WARRANTY D-Links sole obligation shall be to repair or replace the defective Hardware

(or any part thereof) at no charge to the original owner. Such repair or replacement will be rendered at an Authorized D-Link Service Office (Service Office). The replacement Hardware need not be new or of an identical model or part; D-Link may in its discretion replace the defective Hardware with any reconditioned product that D-Link reasonably determines substantially equivalent or superior in all material respects to the defective Hardware. The warranty period shall extend for an additional ninety (90) days after any repaired or replaced Hardware is delivered. If a material defect is incapable of correction, or if D-Link determines in its discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser will be refunded upon return to D-Link of the defective Hardware. All Hardware shall become the property of D-Link upon replacement or refund. TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. GOVERNING LAW The Limited Warranty herein shall be governed by the laws of the Republic of Singapore. TRADEMARKS D-Link is a registered trademark of D-Link Corporation/D-Link International. All other trademarks belong to their respective proprietors. COPYRIGHT STATEMENT No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link International. INFORMAES DE GARANTIA Para ter direito a GARANTIA , favor registrar os seus produtos no portal http://register.dlink.com PASES NOS QUAIS A GARANTIA LIMITADA DA D-LINK SE APLICA Os termos de Garantia Limitada dessa documentao aplicam-se a maioria dos pases na sia, Oceania, Amrica Latina e frica. Para a lista de pases detalhada, favor consultar o website da D-Link. http://warranty.dlink.com. Para pases no includos na lista, favor consultar o website local da D-Link. GARANTIA LIMITADA A D-Link oferece esta Garantia Limitada para o seu produto apenas pessoa ou entidade que originalmente adquiriu o produto da D-Link ou de um revendedor/

distribuidor autorizado. A D-Link ir cumprir suas obrigaes de garantia de acordo com a poltica de garantia local, do pas no qual voc adquiriu os nossos produtos. O perodo de garantia comea a partir da data da compra da D-Link ou de um revendedor/distribuidor autorizado, devidamente comprovado atravs da Nota Fiscal de Venda ou Cupom Fiscal. Pode ser solicitado que voc fornea a prova da compra como uma condio para prestao de servio de garantia. Voc tem direito ao servio de garantia de acordo com os termos e condies deste documento, caso requerido dentro do perodo de garantia. Tabela de Perodo de Garantia O perodo de garantia demonstrado nessa tabela tem precedncia e substitui o perodo de garantia conforme definido no manual do usurio para produtos relevantes. Tipo de Produto Unmanaged Switch:

DES-1008F/1008P/1016D/1018DG/1024D, DES-1026G/1048/1050G, DGS-1016D/1024D EasySmart Switch:

Srie DES-1100 Web Smart Switch:

Srie DES-1200/1210, Srie DGS-1200/1210 Entry-Level Managed Switch:

Srie DES-3000, Srie DGS-3100, DES-3028/3028P/3052/3052P X-STACK Managed Switch:

Srie DGS-3200/3400/3600, Srie DES-

3500/3528/3552/3800/3810, DES-3200-26, DES-3200-28 Unified Wired/Wireless Switch:

Srie DWS-3000/4000 Switch Expansion Module:

DEM-201F/201FL/301G/301T/410X/410CX Unified Wireless AP DWL-3500AP/8500AP/8600AP AirPremier Wireless AP DWL-2100AP/2200AP/3140 AP/3200AP/2700AP, DWL-

3260AP/7100AP/8200AP/7700AP, DAP-3220 AirPremier N Wireless AP DAP-1353/2553/2590/2690/3520/3690 NetDefend IPS Firewall DFL-210/800/1600/2500 NetDefend UTM Firewall DFL-160/260/860/1660/2560/2560G VPN Firewall DSR-1000N, DSR-500N Perodo de Garantia Garantia Vitalcia Limitada a. Isso significa que a garantia s vai acabar 5 (cinco) anos aps a descontinuidade do produto. b. Ventoinhas internas e fontes de alimentao internas so includos. c. Fontes de alimentao externas so excludas. d. A Garantia Vitalcia Limitada aplica-se aos produtos esquerda adquiridos aps 1. de Outubro de 2.009. e. Para que a Garantia Vitlicia Limitada tenha validade, o produto dever ser registrado no portal de registro de produtos da D-Link http://register.dlink.com em at 30 (trinta) dias corridos aps a compra. f. Caso o produto no seja registrado no portal acima, o cliente ter direito somente da garantia padro oferecida pela D-Link. Tipo de Produto Chassis Based Switch Srie DES-7200/6500 Softwares, peas de reposio e kits sobressalentes Demais produtos incluindo mas no limitado aos produtos destinados a uso domstico ou para pequenas e mdias empresas. Perodo de Garantia Dois (2) anos*

Noventa (90) dias*

Um (1) ano*

*Alguns pases oferecem perodos de garantia diferentes das informadas acima. Favor consultar o perodo de garantia correto do seu produto na pgina http://suporte.dlink.com.br/suporte/listadeprodutos/

IMPORTANTE:

Os cdidos e tipo de produtos listados acima, esto sujeitos a alterao sem prvio aviso. Favor consultar http://warranty.dlink.com para ter acesso as informaes atualizadas. GARANTIA DE HARDWARE LIMITADA A nica obrigao da D-Link ser reparar ou substituir o Hardware defeituoso

(ou qualquer parte do mesmo) . Esse reparo ou substituio ser executado em uma Assistncia Tcnica Autorizada da D-Link. A D-Link poder, a seu critrio, substituir o Hardware defeituoso por qualquer produto que a D-Link considere equivalente ou superior em todos os aspectos materiais ao Hardware defeituoso. O Perodo da Garantia ser prorrogado por mais noventa (90) dias aps o Hardware reparado ou substitudo for entregue. Se um defeito material for incapaz de ser corrigido, ou se a D-Link determinar, segundo seu prprio critrio, que no ser prtico reparar ou substituir o Hardware defeituoso, o valor pago pelo comprador original ser restitudo com a devoluo D-Link do Hardware defeituoso. Todo Hardware tornar-se- propriedade da D-Link aps a substituio ou reembolso. GARANTIA LIMITADA DO SOFTWARE A D-Link garante que a parte de software deste produto ("Software") ser substancialmente compatvel com as suas especificaes atuais de funcionamento da data da entrega original por um perodo de noventa (90) dias, desde que adequadamente instalado e operado em hardware aprovado. A nica obrigao da D-Link ser substituir o Software no conforme. O Software substituto ser fornecido somente ao licenciado original e estar sujeito aos termos e condies da licena concedida pela D-Link. O perodo da garantia ser prorrogado por mais noventa (90) dias aps qualquer Software substituto ser entregue. Se uma no conformidade de material for incapaz de ser corrigida, ou se a D-Link determinar, segundo seu prprio critrio, que no possvel substituir o Software no conforme, o preo pago pelo licenciado original ser restitudo pela D-Link, desde que o Software no conforme (e todas as suas cpias) sejam primeiramente devolvidos para a D-Link. A licena concedida em relao a qualquer Software para o qual o reembolso for feito terminar automaticamente. O QUE VOC DEVE FAZER PARA O SERVIO DE GARANTIA Qualquer reclamao sujeita a esta garantia limitada dever ser apresentada por escrito antes do trmino do Perodo de Garantia a uma Assistncia Tcnica Autorizada com uma descrio por escrito do defeito do Hardware ou no conformidade do Software com detalhes suficientes para permitir que a D-Link confirme o mesmo. O proprietrio original do produto precisar ligar para o Suporte Tcnico e apresentar a Nota Fiscal de Venda para obter um nmero de Autorizao de RMA (RMA - Return Material Authorization). Aps a emisso do nmero de RMA, o produto defeituoso deve ser embalado de forma segura, na caixa original ou em embalagem apropriada, de forma a garantir que no seja danificado durante o transporte, devendo o nmero do RMA ser marcado de forma visvel no lado externo da embalagem. O produto embalado dever ser remetido para uma Assistncia Tcnica Autorizada. A D-Link poder rejeitar ou devolver qualquer produto que no esteja embalado ou enviado estritamente de acordo com os requerimentos anteriores, ou quando o nmero da RMA no for visvel do lado de fora da embalagem. O proprietrio do produto ir pagar os custos de manuseio e devoluo de qualquer produto que no tenha sido empacotado e enviado de acordo com os requerimentos anteriores, ou que tenham sido avaliados pela D-Link como no tendo defeitos ou no conformes. O QUE NO EST COBERTO A garantia limitada fornecida pela D-Link no cobre:

Produtos, que no julgamento da D-Link tenham sido sujeitos a abusos, acidentes, alterao, modificao, adulterao, negligncia, uso indevido, instalao defeituosa, falta de cuidado, qualquer conserto ou servio que no esteja contemplado na documentao do produto, ou se o modelo ou nmero de srie tiver sido alterado, adulterado, apagado ou removido; danos que ocorram no transporte, sejam por fora maior, falhas devidas a falta de energia, e danos aparentes; e qualquer hardware, software, firmware ou outros produtos ou servios fornecidos por qualquer outro que no a D-Link ou qualquer Escritrio de Servios. AVISO DE ISENO DE RESPONSABILIDADE EXCETO PELA GARANTIA LIMITADA AQUI ESPECIFICADA, O PRODUTO FORNECIDO "NO ESTADO EM QUE SE ENCONTRA"

SEM UMA GARANTIA DE QUALQUER TIPO SEJA QUAL FOR, INCLUINDO, SEM LIMITAES, QUALQUER GARANTIA MERCANTIL, DE ADEQUAO A UM PROPSITO PARTICULAR E NO INFRAO. LIMITAO DE RESPONSABILIDADE AT A EXTENSO MXIMA PERMITIDA PELA LEI, A D-LINK NO RESPONSVEL SOB NENHUM CONTRATO, NEGLIGNCIA, ESTRITA RESPONSABILIDADE OU OUTRA TEORIA LEGAL OU EQUIVALENTE POR QUALQUER PERDA PELO USO DO PRODUTO, INCONVENIENTES OU DANOS DE QUALQUER TIPO, SEJAM DIRETOS, ESPECIAIS, ACIDENTAIS OU CONSEQUNCIAIS

(INCLUINDO, MAS NO LIMITADOS A, DANOS POR PERDAS DE CLIENTES, PERDA DE RECEITA OU LUCROS, INTERRUPO DE TRABALHOS, AVARIAS DE COMPUTADORES OU MAU FUNCIONAMENTO, AVARIAS EM OUTROS EQUIPAMENTOS OU PROGRAMAS DE COMPUTADORES AOS QUAIS O PRODUTO DA D-LINK ESTA CONECTADO, PERDA DE INFORMAES OU DADOS CONTIDOS OU ARMAZENADOS OU INTEGRADOS A QUALQUER PRODUTO QUE TENHA SIDO DEVOLVIDO A D-LINK PARA SERVIO DE GARANTIA) RESULTANTES DO USO DESTE PRODUTO, RELACIONADO COM A GARANTIA DE SERVIO, OU QUE SE APRESENTE ATRAVS DE UMA QUEBRA DESTA GARANTIA LIMITADA, MESMO QUE A D-LINK TENHA SIDO AVISADA DA POSSIBILIDADE DESTE PREJUZO. A NICA ALTERNATIVA PARA UMA QUEBRA DESTA GARANTIA O CONSERTO, SUBSTITUIO OU DEVOLUO DO PRODUTO DEFEITUOSO OU NO-CONFORME. LEI REGENTE Esta Garantia Limitada ser regulada pelas leis do pas onde o produto foi adquirido. Marca registrada D-Link uma marca comercial registrada da D-Link Corporation/

D-Link International. Todas as demais marcas registradas pertencem aos seus respectivos proprietrios. Declarao de Direitos Autorais proibida a reproduo de qualquer parte desta publicao sob qualquer forma ou por qualquer meio, tais como traduo, transformao ou adaptao sem autorizao da D-Link Corporation/

D-Link International. 1. 2. 2 D-Link , , , 3. 1 D-Link , , , , ,

. 4. DFL, SMART 2007 www.dlink.ru , , , , ,

, , , , 5. c

2.1. , - ;

2.2. oot ROM, , , - 90

. 2 , 6 ( ) 7 (

) . 6.

, . 7. 8. , 30

. 9.

. 10.

. 11. ,

. 12. 13.

o ,

o , ,

o ; (

o ( , ,

.) 2006 D-Link Systems, Inc. . NO. ______________

- , 2-

SAFETY INSTRUCTIONS Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not expressly approved by D-Link may result in the loss of product warranty. Unless expressly approved by an authorized representative of D-Link in writing, you may not and may not permit others to:

Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from the device or from any other information provided by D-Link, except to the extent that this restriction is expressly prohibited by local law. Modify or alter the device. Remove from the device any product identification or other notices, including copyright notices and patent markings, if any.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the device and other equipment, observe the following precautions:

Power Sources Observe and follow service markings. Do not push any objects into the openings of your device unless consistent with the authorized operation of the device. Doing so can cause a fire or an electrical shock by shorting out interior components. The powering of this device must adhere to the power specifications indicated for this product. Do not overload wall outlets and/or extension cords as this will increase the risk of fire or electrical shock. approved as suitable for stacking). Do not rest anything on the power cord or on the device (unless the device is made and expressly Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure that nothing rests on any cables. Operate the device only from the type of external power source indicated on the electrical ratings label. To help avoid damaging your device, be sure the voltage selection switch (if provided) on the power supply is set to match the power available at your location. Also be sure that attached devices are electrically rated to operate with the power available in your location. Use only approved power cable(s). If you have not been provided a power cable for your device or for any AC-powered option intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your device. The power cable must be rated for the device and for the voltage and current marked on the devices electrical ratings label. The voltage and current rating of the cable should be greater than the ratings marked on the device. To help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs. Observe extension cable and power strip ratings. Ensure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip. To help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always follow your local/national wiring rules. When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following guidelines:

Install the power supply before connecting the power cable to the power supply. Unplug the power cable before removing the power supply. If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the power supplies. Servicing/Disassembling Do not service any product except as expressly set forth in your system documentation. Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an electrical shock. Only a trained service technician should service components inside these compartments. To reduce the risk of electrical shock, never disassemble this device. None of its internal parts are user-

replaceable; therefore, there is no reason to access the interior. Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider. Use the device only with approved equipment. Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops and uneven surfaces. Environment Do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool). Do not use this device in areas with high humidity. This device must not be subjected to water or condensation. Keep your device away from radiators and heat sources. Also, do not block cooling vents. Cleaning Always unplug the power before cleaning this device. Do not use liquid or aerosol cleaners of any kind. Use only compressed air that is recommended for electronic devices. Use a dry cloth for cleaning. PROTECTING AGAINST ELECTROSTATIC DISCHARGE Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on the chassis. You can also take the following steps to help prevent damage from electrostatic discharge (ESD):

1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging, be sure to discharge static electricity from your body. 2. When transporting a sensitive component, first place it in an antistatic container or packaging. 3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic grounding strap. FCC WARNING Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (ONLY FOR WIRELESS PRODUCT) At the time of writing this addendum, some countries such as Italy, Greece, Portugal and Spain hasnt allowed operation of radio devices in the 5Ghz bands, although operation of 2.4Ghz radio devices are allowed. Please check with your local authority to confirm. This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France where restrictive use applies. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, OL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Usage Notes:

To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed. This device is restricted from functioning in Ad-hoc mode while operating in 5Ghz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5Ghz within the EU. Countries 5GHz wireless frequency and channel operation in EEC countries Allowable 802.11a Frequencies and Channels 5.15-5.25 GHz

(Channels 36, 40, 44, 48) 5.15-5.25 Ghz & 5.725-5.875 Ghz

(Channels 36, 40, 44, 48, 149, 153, 157, 161, 165, 169) 5.15-5.35 GHz

(Channels 36, 40, 44, 48, 52, 56, 60, 64) Liechtenstein, Austria France 5.15-5.35 & 5.47-5.725 GHz

(Channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140) 5.15-5.35 Ghz & 5.725-5.875 Ghz

(Channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165, 169) Denmark, Germany, Iceland, Finland, Netherlands, Norway, P o l a n d , S w e d e n , S l o v e n i a , Luxembourg, U.K., Ireland, Slovak, Switzerland, Hungary, Italy Czech Republic 2.4GHz wireless frequency operation in EEC countries Region Metropolitan Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte Reunion et Guyane Rest of EU community Max output power (EIRP) 100mW 100mW indoor, 10mW outdoor 100mW 100mW 2400-2483.5MHz 2420-2483.5MHz Frequency band 2400-2454MHz 2454-2483.5MHz R&TTE 1999/5/EC WLAN 2.4 2.4835 GHz IEEE 802.11 b/g/n MHz, Europa (ETSI) max. EIRP Innenbereich 100 mW 2400-2483,5 MHz 100 mW 2400-2454 MHz 24542483,5 MHz 100 mW Spectrum regulation Europa Frankreich max. EIRP Auenbereich 100mW 100mW 10 mW European Community Declaration of Conformity:

esky

[Czech]

Dansk

[Danish]

D-Link Corporation tmto prohlauje, e tento je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede D-Link Corporation erklrer herved, at flgende udstyr overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt D-Link Corporation, dass sich das Gert in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab D-Link Corporation seadme vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, D-Link Corporation, declares that this is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Deutsch

[German]

Eesti

[Estonian]

English Espaol

[Spanish]

[Greek]

Franais

[French]

Italiano

[Italian]

Latviski

[Latvian]

Lietuvi

[Lithuanian]

Nederlands

[Dutch]

Malti

[Maltese]

Magyar

[Hungarian]

Polski

[Polish]

Portugus Portuguese]

Slovensko

[Slovenian]

Slovensky

[Slovak]

Suomi

[Finnish]

Svenska

[Swedish]

slenska

[Icelandic]

Norsk

[Norwegian]

Por medio de la presente D-Link Corporation declara que el cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. D - L i n k C o r p o r a t i o n 1999/5/. Par la prsente D-Link Corporation dclare que l'appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente D-Link Corporation dichiara che questo conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o D-Link Corporation deklar, ka atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. iuo D-Link Corporation deklaruoja, kad is atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart D-Link Corporation dat het toestel in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, D-Link Corporation, jiddikjara li dan jikkonforma mal-

tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-

Dirrettiva 1999/5/EC. Alulrott, D-Link Corporation nyilatkozom, hogy a megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym D-Link Corporation owiadcza, e jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. D-Link Corporation declara que este D-Link Corporation est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. D-Link Corporation izjavlja, da je ta v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. D-Link Corporation tmto vyhlasuje, e spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. D-Link Corporation vakuuttaa tten ett tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar D-Link Corporation att denna str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Hr me lsir D-Link Corporation yfir v a er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 1999/5/EC. D-Link Corporation erklrer herved at utstyret er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. WARNING STATEMENT----(if the equipment will be used an external power adapter) The power outlet should be nearby the device and easily accessible. IMPORTANT INFORMATION Important information regarding your internet subscription Users who subscribe to limited or pay as you use broadband internet access. In the WAN configuration settings, there is a parameter called Maximum idle timer. This parameter controls how many seconds of inactivity before dropping connection to the internet. The default setting is 0 which disables this functionality and the internet will be connected all the time. We suggest that you should change the Maximum idle timer to 300 (5 minutes) so that the device will drop the line after 5 minutes of inactivity and keep usage costs down. Users who subscribe to unlimited broadband internet access. You can just leave this parameter unchanged or enable Auto-reconnect to be always on line. Technical Notes:

The Maximum idle timer is only relevant if your ISP is using PPPoE connection.

, WAN , Maximum idle timer.

, . "0",

, . Maximum idle timer "300" (5 ) , 5 ,

. Auto-reconnect

Maximum idle timer , PPPoE. Informacin importante acerca de la subscripcin a Internet Los usuarios suscritos, en los parmetros de configuracin WAN, a un acceso a Internet de banda ancha limitado o de pago por uso, encontrarn un parmetro llamado Maximum idle timer. Este parmetro controla cuntos segundos de inactividad se permiten antes de que se interrumpa la conexin a Internet. El valor por defecto es 0, y desactiva esta funcionalidad, con lo que se estar conectado ininterrumpidamente a Internet. Se recomienda que se modifique el valor de Maximum idle timer a 300 (5 minutos); as el dispositivo cortar la lnea tras 5 minutos de inactividad y se reducirn los costes por uso. Los usuarios suscritos a un acceso a internet de banda ancha ilimitado pueden dejar este parmetro como se encuentra o bien activar Auto-reconnect para estar siempre conectados. Notas tcnicas:

Maximum idle timer slo es relevante si el ISP usa una conexin PPPoE. Informaes importantes referentes sua assinatura de Internet Usurios que assinam o servio de Internet de banda larga limit ado ou "pay as you use"

Nos ajustes de configurao de WAN, h um parmetro denominado Maximum idle timer (Cronmetro de tempo de inatividade mximo). Este parmetro controla o nmero de segundos de inatividade antes que a conexo com a Internet seja encerrada. A configurao padro "0", que desabilita esta funcionalidade e a Internet ficar conectada o tempo todo. Sugerimos que voc modifique o Maximum idle timer para "300" (5 minutos), de tal maneira que o dispositivo ser desconectado aps cinco minutos de inatividade e visando manter os custos de utilizao baixos. Usurios que assinam o acesso de Internet de banda larga ilimitado Basta deixar este parmetro como est ou habilitar o Auto-reconnect (Reconexo automtica) para estar sempre on-line. Observaes Tcnicas:

O Cronmetro de tempo de inatividade mximo s relevante se o seu provedor est utilizando uma conexo PPPoE. Information importante concernant votre abonnement internet Aux utilisateurs qui ont souscrit un abonnement limit ou avec paiement uniquement lutilisation Au niveau du paramtrage de la configuration WAN, il y a un paramtre appel Maximum idle timer. Ce paramtre contrle le nombre de secondes dinactivit avec la coupure de la connexion Internet. Le paramtre par dfaut est 0, ce qui dvalide cette fonctionnalit et vous connecte internet tout le temps. Nous vous conseillons de changer le Maximum idle timer 300 (5 minutes) de sorte que la ligne soit coupe aprs 5 minutes dinactivit pour limiter les cots. Aux utilisateurs qui ont souscrit un abonnement internet illimit. Vous pouvez laisser ce paramtre 0 ou valider lAuto-reconnexion pour toujours tre en ligne. Note technique :

Le Maximum idle timer est utile uniquement si votre FAI utilise une connexion PPPoE. WAN Configuration 0 300(5) 5 ISPPPPoE DISPOSING AND RECYCLING YOUR PRODUCT ENGLISH This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in the household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. D-Link and the environment At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions. To learn more about our environmentally responsible products and packaging please visit www. dlinkgreen.com PYCC

. D-Link D-Link

. D-Link

, D-Link , . D-Link www. dlinkgreen.com Warranty Guide Class B v24(DI) DWDIWARRBK0024