all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 4.93 MiB | December 12 2013 | |||
1 |
|
Internal photos | Internal Photos | 583.04 KiB | December 12 2013 | |||
1 |
|
External photos | External Photos | 451.61 KiB | December 12 2013 | |||
1 |
|
Label format and location | ID Label/Location Info | 39.93 KiB | December 12 2013 | |||
1 |
|
Agent authorization | Cover Letter(s) | 109.11 KiB | December 12 2013 | |||
1 |
|
Agent authorization from grantee | Cover Letter(s) | 252.27 KiB | December 12 2013 | |||
1 | Antenna specification | Operational Description | December 12 2013 | confidential | ||||
1 | Block diagram 1 of 2 | Block Diagram | December 12 2013 | confidential | ||||
1 | Block diagram 2 of 2 | Block Diagram | December 12 2013 | confidential | ||||
1 | Operational description | Operational Description | December 12 2013 | confidential | ||||
1 | RF Exposure Info | December 12 2013 | ||||||
1 |
|
Request for confidentiality | Cover Letter(s) | 42.26 KiB | December 12 2013 | |||
1 | Schematics | Schematics | December 12 2013 | confidential | ||||
1 | Test Report | December 12 2013 | ||||||
1 | Test Setup Photos | December 12 2013 |
1 | User manual | Users Manual | 4.93 MiB | December 12 2013 |
User Manual HD Wireless N Pan/Tilt Network Camera DCS-5222LB1 Manual Overview Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Revisions Date Description 11/311/2013 DCS-5222LB1 Revision B1 with firmware version 1.00 Revision 1.0 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2013 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DCS-5222LB1 User Manual i Table of Contents Table of Contents Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 4 Hardware Overview ..................................................................... 5 Front .......................................................................................... 5 LEDs ........................................................................................... 6 Back............................................................................................ 7 Left and Right Side ............................................................... 8 Adjusting Camera Focus ............................................................ 9 Installation .......................................................................10 Zero Configuration Setup ........................................................11 Camera Setup Wizard ................................................................14 Wireless Installation Considerations ....................................17 WPS - Push Button Setup .........................................................18 mydlink .............................................................................19 Configuration ...................................................................21 Configuration Utility ..................................................................21 Live Video ......................................................................................22 Setup ...............................................................................................24 Setup Wizard ........................................................................24 Internet Connection Setup Wizard ..........................25 Motion Detection Setup Wizard ...............................29 Network ..................................................................................33 Wireless ..................................................................................36 Dynamic DNS .......................................................................37 Image Setup .........................................................................38 Audio and Video ..................................................................40 PTZ ...........................................................................................42 Motion Detection ...............................................................43 Sound Detection .................................................................44 Time and Date ......................................................................45 SD Management .................................................................55 Maintenance ................................................................................56 Admin .....................................................................................56 System ....................................................................................58 Firmware Upgrade ..............................................................59 Status ..............................................................................................60 Device Info ............................................................................60 Log ...........................................................................................61 Help .................................................................................................62 Configuring the DCS-5222LB1 with a Router ................63 Troubleshooting ..............................................................69 Networking Basics ...........................................................73 Check your IP address ...............................................................73 Statically Assign an IP Address ..............................................74 D-Link DCS-5222LB1 User Manual ii Table of Contents Technical Specifications - I/O Terminal Applications ....75 Technical Specifications ..................................................76 D-Link DCS-5222LB1 User Manual iii Section 1 - Product Overview Product Overview Package Contents DCS-5222LB1 Network Camera Power Supply1 Camera Base and Mounting Kit CD-ROM CAT5 Ethernet Cable 1 Using a power supply with a different voltage rating than the one included with the DCS-5222LB1 will cause damage and void the warranty for this product. If any of the above items are missing from your package, please contact your retailer. D-Link DCS-5222LB1 User Manual 1 Section 1 - Product Overview System Requirements Network Requirements 10/100 Ethernet network or an 802.11n/g/b wireless network An Internet connection A router connected to your broadband modem CD Setup Wizard Requirements Computer with the following:
A PC with a wired connection to your router Windows 8 (32/64bit), Windows 7 (32/64bit), XP (32/64bit),Vista (32/64bit), Mac OSX 10.5 or above Web-based Configuration Utility Requirements Browser Requirements:
Internet Explorer 8 or higher Firefox 12 or higher Safari 4 or higher Chrome 20 or higher Note: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. mydlink Website Requirements Broadband Internet connection Computer with:
Internet Explorer 7 or higher (ActiveX) Firefox 12 or higher Safari 4 or higher Chrome 20 or higher D-Link DCS-5222LB1 User Manual 2 Section 1 - Product Overview Introduction Congratulations on your purchase of the DCS-5222LB1 HD Wireless N Pan/Tilt Network Camera. The DCS-5222LB1 is a versatile solution for your small office or home. The DCS-5222LB1 is a complete system with a built-in CPU and web server that transmits high quality video images for security and surveillance. It can be accessed remotely, and controlled from any PC/Notebook over your local network or across the Internet via a web browser. The DCS-5222LB1 features 802.11n wireless connectivity, allowing the camera to be placed anywhere within range of your wireless network. The DCS-5222LB1 comes with remote monitoring and motion detection features for a complete and cost-effective home security solution. D-Link DCS-5222LB1 User Manual 3 Section 1 - Product Overview Features Simple to Use The DCS-5222LB1 is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards. The DCS-5222LB1 supports both ActiveX mode for Internet Explorer and Java mode for other browsers such as Firefox, Chrome, and Safari. Supports a Variety of Platforms The DCS-5222LB1 supports TCP/IP networking, HTTP, and other Internet related protocols. It can also be integrated easily into other Internet/Intranet applications because of its standards-based features. Web Configuration Using a standard web browser, administrators can configure and manage the network camera directly from its own web page via an Intranet or the Internet. Broad Range of Applications With todays high-speed Internet services, the DCS-5222LB1 network camera can provide an ideal solution for live video over the Internet and for remote monitoring. The DCS-5222LB1 allows remote access from a web browser for live image viewing and management of the network cameras anytime, from anywhere in the world. The network camera has a wide range of applications, including industrial and public monitoring of homes, offices, banks, hospitals, child-care centers, and amusement parks. 802.11n Wireless or Ethernet/Fast Ethernet Support The DCS-5222LB1 offers wireless 802.11n and Ethernet/Fast Ethernet connectivity, making the DCS-5222LB1 easy to integrate into your existing network environment. The DCS-5222LB1 works with a 10Mbps Ethernet based network or 100Mbps Fast Ethernet based network for traditional wired environments, and works with 802.11n routers or access points for added flexibility. The Site Survey feature also allows you to view and connect to any available wireless networks. Remote Monitoring Utility The D-ViewCam application adds enhanced features and functionality for the network camera and allows administrators to configure and access the network camera from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing up to 32 cameras on one screen, and taking snapshots. Note that D-ViewCam works on Windows computers only. IR LED for day and night functionality The built-in infrared LEDs enables night time viewing of up to 16 feet (5 meters). D-Link DCS-5222LB1 User Manual 4 Section 1 - Product Overview Hardware Overview Front 1 2 3 4 5 6 8 1 2 3 4 5 6 IR LEDs for night vision Used to illuminate the cameras field of view at night Focus Adjustment Ring Enables manual adjustment of the cameras focal length. Passive Infrared Sensor Passive Infrared (PIR) sensor for motion detection Light Sensor Camera Lens Microphone Detects light levels and adjusts IR-LEDS accordingly. Records video of the surrounding area Records audio from the surrounding area D-Link DCS-5222LB1 User Manual 5 Section 1 - Product Overview Hardware Overview LEDs 1 2 1 Power & Link LED The LED will be solid red while the camera boots, performs a self test, and searches for a network connection. The LED will switch to solid green when a proper connection has been achieved. The LED will blink green during data transfer. 2 WPS Status LED Indicates the WPS (Wi-Fi Protected Setup) connection status of the camera D-Link DCS-5222LB1 User Manual 6 Section 1 - Product Overview Hardware Overview Back 1 2 3 4 5 1 2 3 4 5 Ethernet Port Audio Out Reset Button DI/DO Power Receptor Connect 10/100 Ethernet devices such as computers, switches, and hubs. Connect headphones/speakers to provide audio out. Press the reset button to return the device back to its factory conditions. Attach digital I/O devices such as alarms or motion sensors. Connects to the power adapter. D-Link DCS-5222LB1 User Manual 7 Appendix A - Technical Specifications Hardware Overview Left and Right Side 1 2 3 4 1 2 3 4 Built in Speaker Use the built-in speaker to provide immediate feedback to triggered events. Antenna WPS Button microSD Slot The external antenna increases the devices range of connectivity. Use WPS (Wi-Fi Protected Setup) to easily create a secure connection to your network. Insert a microSD card to store recorded images and video. D-Link DCS-5222LB1 User Manual 8 Section 1 - Product Overview Adjusting Camera Focus To manually adjust the camera focus, rotate the focussing ring around the lens clockwise or anti-clockwise. D-Link DCS-5222LB1 User Manual 9 Section 1 - Product Overview There are three ways to set up your camera:
Installation Zero Configuration Setup: If you have a mydlink-enabled router, this is the easiest way to set up your camera. Refer to page 11. Camera Setup Wizard: If you do not have a mydlink-enabled router, use the Camera Installation Wizard to guide you through setup and initial configuration of your camera. Refer to page 14. Manual Hardware Installation: This section shows you how to manually set up your camera, though in order to use the mydlink features of your camera, you will still need to run the Camera Installation Wizard. Refer to page 16. D-Link DCS-5222LB1 User Manual 10 Section 1 - Product Overview Zero Configuration Setup If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically configures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router. Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-5222LB1 and automatically add the camera to your mydlink account. After the short time it takes to do this you can remotely access your camera from the www.mydlink.com website to manage and monitor your DCS-5222LB1 Connect the Ethernet Cable Use the included Ethernet cable and plug it into the camera. Plug the other end into an available port on your router. If you wish to use your camera wirelessly, you will be able to remove the cable after Zero Configuration Setup is complete. Attach the External Power Adapter Connect the power adapter to the power connector on your camera, then plug the power adapter into a wall outlet. D-Link DCS-5222LB1 User Manual 11 Section 1 - Product Overview Check Your mydlink Account Open a web browser and login to your mydlink account. The mydlink page will check for new devices and display a New device Found! pop-up notification in the bottom-left corner. Click the notification to continue. A summary and confirmation notification will appear with the automatically configured details. Make a note of the details and click Yes to add the camera to your account. D-Link DCS-5222LB1 User Manual 12 Section 1 - Product Overview Zero Configuration will navigate to the mydlink Live View tab for your camera where you will see a screen similar to the following. If you wish to connect your camera to your router wirelessly, you can simply disconnect the Ethernet cable and move the camera to its intended location;
your router's wireless settings have been automatically transferred to the camera, and no further configuration is required. Your camera is now set up, and you can skip to mydlink on page 19 to learn more about the mydlink features of this camera, or to Configuration on page 21 for advanced configuration of your camera. D-Link DCS-5222LB1 User Manual 13 Section 2 - Installation Camera Setup Wizard If you do not have a mydlink-enabled Cloud Router, you can use the Camera Setup Wizard to guide you through the process of adding your camera to the mydlink service. Windows Users Insert the Installation CD-ROM into your computers optical drive to start the autorun program. If the autorun program does not open, go to My Computer, browse to your CD drive, and double-click on the autorun.exe file. Once the wizard has started simply click Set up your Cloud Camera to go through the Setup Wizard, which will guide you step-by-step through the installation process from connecting your hardware to configuring your camera and registering it with your mydlink account. D-Link DCS-5222LB1 User Manual 14 Section 2 - Installation Mac Users Insert the Installation CD-ROM into your computers optical drive. On the desktop, open your CD drive and double-click on the SetupWizard file. After about 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from connecting your hardware to configuring your camera and registering it with your mydlink account. D-Link DCS-5222LB1 User Manual 15 Section 2 - Installation Manual Hardware Installation If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps. Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero Configuration Setup. Connect the Ethernet Cable and Power Cable Use the included Ethernet cable and plug it into the camera. Plug the other end into an available LAN port on your router. Plug the supplied power adapter into the back of the camera Plug in the External Power Adapter Plug the power adapter into a wall outlet. Configure Your Camera Refer to Configuration on page 21 for information on how to configure your camera. Optional: Use WPS to Connect Wirelessly You can use WPS to connect your camera to your network wirelessly. For more information, refer to WPS - Push Button Setup on page 18. If your router does not support WPS, you will still be able to set up your cameras wireless settings in the cameras web interface. D-Link DCS-5222LB1 User Manual 16 Section 1 - Product Overview Wireless Installation Considerations The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your network camera) -
each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters). 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a difference. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise. 5. If you are using 2.4GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DCS-5222LB1 User Manual 17 Section 2 - Installation WPS - Push Button Setup Alternatively, you may create a connection to the camera using the Wi-Fi Protected Setup (WPS) feature. To create a WPS connection:
Step 1 Press and hold the WPS button for three seconds. The blue WPS status LED above the button will blink. Step 2 Press the WPS button on your router or access point within 120 seconds. The WPS button is usually on the front or side of your router. On some routers and access points, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button is on your router/AP, please refer to your router or APs User Manual. The DCS-5222LB1 will automatically create a wireless connection to your router or access point. While connecting, the green LED will flash and your camera will reboot. WPS Button D-Link DCS-5222LB1 User Manual 18 Section 3 - mydlink Portal mydlink After registering your DCS-5222LB1 camera with a mydlink account in the Camera Setup Wizard. You will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following:
For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to find the latest instruction guide for your camera's mydlink features. D-Link DCS-5222LB1 User Manual 19 Section 3: mydlink Here, you can see the online status of each of your cameras. Your online status may be one of the following:
Camera Status A green checkmark indicates that your camera is online and ready to use. A yellow exclamation point indicates that your camera is online, but the camera password has changed. You will need to enter your new camera password to access your camera again. A red X indicates that your camera is offline and currently cannot be accessed remotely. If your camera is offline, try the following:
Check to make sure that the Internet connection to your camera is working properly. Try restarting your Internet router. Check your cameras cable connections and make sure they are secure. Check to make sure that the LED on your camera is lit solid green. If you still cannot access your camera, reset your camera and run the Camera Installation Wizard again from the CD-ROM included in your package. D-Link DCS-5222LB1 User Manual 20 Section 4 - Configuration Configuration Configuration Utility After completing the Camera Installation Wizard, you are ready to use your camera. The cameras built-in Web configuration interface is designed to allow you to easily access and configure your DCS-5222LB1. At the end of the wizard, enter the IP address of your camera into a web browser, such as Internet Explorer. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK. Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20. D-Link DCS-5222LB1 User Manual 21 Section 4 - Configuration Live Video Please make sure that you have the latest version of Java installed on your computer to ensure proper operation when viewing the video in Java mode. Java can be downloaded free from Suns web site (http://www.java.com). A live feed from the camera is displayed upon logging into the cameras web interface. P/T/Z Action Pad:
Use the Pan / Tilt / Zoom action pad to control the cameras movement and zoom. The large arrow icons will move the camera up, down, left or right while the small arrow icons will move the camera position diagonally in the direction they are pointed. The Home button will move the camera to the preset Home position. Pan:
Press this button and the camera will pan from left-most position to the right-most position and then return to its original position. Preset Sequence:
Click this button to quickly move the camera to the desired patrol setup according to preset positions. Please refer to 42 PTZ to create preset positions. Stop:
Go To:
This will stop pan and patrol. Select from the preset drop-down list to quickly move the camera to the desired preset position. Please refer to 42 PTZ to create preset positions. Pan/Tilt Speed:
This setting can change the cameras pan/tilt speed. Language Selection:
Select the default language for the user interface. The next page contains several icons which can be used to control the cameras main functions. D-Link DCS-5222LB1 User Manual 22 Section 4 - Configuration Icon Button Name Profile buttons Function Use these buttons to switch between video profiles. Refer to 40 Audio and Video for more information on setting up profiles. Full Screen button Displays the video at full screen. Snapshot button Video recording button Takes a snapshot of the image currently displayed on the screen and will save it to a file on the hard drive in a folder specified using the Storage folder button. Triggers the cameras recording function. This will record the video displayed on the screen and will save it to a file on the hard drive in a folder specified using the Storage folder button. Storage folder button Sets the location to save snapshots and video recordings. Listen button Talk button Sends the audio received from the cameras microphone through to the PCs speakers. Click again to turn off. Sends audio from a microphone connected to your PC through to the speakers connected to the camera. Start Digital Input Digital Input Indicator Motion Trigger Indicator Recording Indicator Auto Pan Stop This indicator will change color when a digital input signal is detected. This indicator will change color when a motion trigger event occurs if enabled. When a recording is in progress, this indicator will change color. Starts the automatic panning function. The ROI will pan from back and forth within the FOV Stops automatic panning. Preset Path Starts the camera's motion along the predefined path. D-Link DCS-5222LB1 User Manual 23 Section 4 - Configuration Setup Setup Wizard This section allows you to begin setup wizards which will guide you through the process of getting your cameras various functions configured. If you comfortable with adjusting the settings manually, you may skip the wizards and adjust the necessary as needed. Internet Connection Setup Wizard:
You may choose to configure your network by using the Internet Connection Setup Wizard that includes step-by-step instructions. Please refer to page Internet Connection Setup Wizard on page 25 for more details. Manual Internet Connection Setup:
If you would rather manually setup the camera internet connection, you can refer to 33 Network which provides more details on the information required. Motion Detection Setup Wizard:
You may choose to configure motion detection by using the Motion Detection Setup Wizard that includes step-by-step instructions. Please refer to page Motion Detection Setup Wizard on page 29 for more details. Manual Motion Detection Setup:
If you would rather manually setup the cameras motion detection features, you can refer to page Motion Detection on page 43 which provides more details on the information required. D-Link DCS-5222LB1 User Manual 24 Section 4 - Configuration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Note that this wizard will not register your camera with mydlink.com. Click Next to continue. Select Automatic IP Address if you want your DHCP server (usually enabled on your router) to assign the camera its IP settings. If you want to manually assign the IP settings, select Static IP Address and enter the following details:
IP Address:
Enter an IP address for your camera. Subnet Mask:
Enter the subnet mask of your network. Default Gateway:
Enter the default gateway address. This is usually the IP address of your router. Primary DNS:
Enter the primary DNS servers IP address. This is usually the IP address of your router. Secondary DNS:
Enter the secondary DNS servers IP address. This is optional. If you are required to connect using PPPoE, select Enabled and enter the Username and Password for your PPPoE connection. Only select this option if your camera is directly connected to your broadband modem. If it is on a network with a router or gateway, do not select this option. Click Next to continue. D-Link DCS-5222LB1 User Manual 25 Section 4 - Configuration A Dynamic DNS account allows you to access your camera over the Internet when you have an IP address that changes each time you connect to the Internet. If you have a Dynamic DNS account, click Enable and enter the following details:
Enable:
Click to enable the DDNS function. DDNS:
(Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified. The username and password are required when using the DDNS service. Server Address:
Select your Dynamic DNS Server from the drop down menu. Host Name:
Enter the host name of the DDNS server. User Name:
Enter your username or e-mail address used to connect to the DDNS. Password:
Enter your password used to connect to the DDNS server. Timeout:
You can setup how often the camera notifies the DDNS server of its current global IP address by entering a whole number in hours. Click Next to continue. D-Link DCS-5222LB1 User Manual 26 Section 4 - Configuration Create a unique name for your camera. Click Next to continue. Select the time zone that the camera is geographically located in so that scheduled events occur at the correct time. If your time zone observes daylight saving, check the Enable Daylight Saving box and select Auto Daylight Saving to have DST set automatically or select Set date and time manually to enable the drop-down menu so that you can set the start and end time of daylight saving yourself. Click Next to continue. D-Link DCS-5222LB1 User Manual 27 Section 4 - Configuration A summary of the options you selected is displayed for confirmation. If you are happy with the selected configuration, click Apply otherwise click Back to make the required changes. D-Link DCS-5222LB1 User Manual 28 Section 4 - Configuration Motion Detection Setup Wizard This wizard will guide you through a step-by-step process to con-
figure the motion detection feature of your new D-Link Camera Click Next to continue. D-Link DCS-5222LB1 User Manual 29 Section 4 - Configuration Enabling the Video Motion option will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for monitoring in a selected area. Enable Video Motion:
Select this box to enable the motion detection feature of your camera. Enable PIR:
When this option is selected, use PIR (passive in-
frared) to detect motion. Sensitivity:
Specifies the measurable difference that would indicate motion. Enter a value between 0 and 100. Clear:
Clears all motion detection areas from the picture. Click Next to continue. D-Link DCS-5222LB1 User Manual 30 Section 4 - Configuration This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected. Step 3 This step allows you to specify how you will receive event notifi-
cations from your camera. You may choose not to receive notifica-
tions, or to receive notifications via e-mail or FTP. Please enter the relevant information for your e-mail or FTP ac-
count. Click Next to continue. D-Link DCS-5222LB1 User Manual 31 Section 4 - Configuration A summary of the options you selected is displayed for confirmation. If you are happy with the selected configuration, click Apply otherwise click Back to make the required changes. D-Link DCS-5222LB1 User Manual 32 Section 4 - Configuration Network Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes. DHCP:
Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically. If you choose DHCP, you do not need to fill out the IP address settings. Static IP Address:
You may obtain a static or fixed IP address and other network information from your network administrator for your camera. A static IP address may simplify access to your camera in the future. IP Address:
Enter the fixed IP address in this field. Subnet Mask:
This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0. Default Gateway:
to The gateway used to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. forward frames Primary DNS:
The primary domain name server translates names to IP addresses. Secondary DNS:
The secondary DNS acts as a backup to the primary DNS. D-Link DCS-5222LB1 User Manual 33 Section 4 - Configuration Enable UPnP Presentation:
Enabling this setting allows your camera to be configured as a UPnP device on your network. Enable UPnP Port Forwarding:
Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP capable network. Enable PPPoE:
Enable this setting if your network uses PPPoE. User Name /
Password:
Enter the username and password for your PPPoE account. Re-enter your password in the Confirm Password field. You may obtain this information from your ISP. HTTP Port:
The default port number is 80. Access Name for Stream 1~3:
The default name is video#.mjpg, where # is the number of the stream. HTTPS Port:
You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443. RTSP Port:
The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify D-Link DCS-5222LB1 User Manual 34 Section 4 - Configuration the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1. sdp where the x.x.x.x represents the ip address of your camera. Enable CoS:
Enabling the Class of Service setting implements a best-effort policy without making any bandwidth reservations. Enable QoS:
Enabling QoS allows you to specify a traffic priority policy to ensure a consistent Quality of Service during busy periods. If the network camera is connected to a router that itself implements QoS, the router's settings will override the QoS settings of the camera. Enable IPV6:
Enable the IPV6 setting to use the IPV6 protocol. Enabling the option allows you to manually set up the address, specify an optional IP address, specify an optional router and an optional primary DNS. Enable Multicast for stream The DCS-5222LB1 allows you to multicast each of the available streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults. D-Link DCS-5222LB1 User Manual 35 Section 4 - Configuration Wireless To set up your Network cameras wireless network interface settings, enable Wireless Settings in this window first. Enable:
Check the box to enable wireless functionality or uncheck the box to disable wireless functionality. Site Survey:
Click the Rescan button to scan for available wireless networks. After scanning, select a wireless network from the drop-down box that you want to connect to. Network Name:
The name of the wireless network. Wireless Mode:
Use the drop-down box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer. Channel:
If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto. Authentication:
Select the type of authentication you are using on your wireless network (Open, Shared (WEP), WPA-PSK, or WPA-PSK2). Encryption:
If you are using WPA-PSK or WPA-PSK2 authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, this setting will be automatically set. Key:
Enter the key or passphase to access a secure network. After making any changes, click the Save Settings button to save your changes, or click the Dont Save Settings button to discard your changes. D-Link DCS-5222LB1 User Manual 36 Section 4 - Configuration Dynamic DNS This section allows you to configure the DDNS setting for your camera. DDNS will allow all users to access your camera using a domain name instead of an IP address. Enable DDNS:
Click to enable the DDNS function. Server Address:
Select your Dynamic DNS Server from the drop-
down menu. Host Name:
Enter the host name of the DDNS server. User Name:
Enter your username or e-mail address used to connect to the DDNS. Password:
Enter your password used to connect to the DDNS server. Verify Password:
Timeout:
Enter your password again for verification. You can setup how often the camera notifies the DDNS server of its current global IP address by entering a whole number in hours. Status:
Displays the connection status of your DDNS account. D-Link DCS-5222LB1 User Manual 37 Section 4 - Configuration Image Setup This section allows you to adjust the image and sensor settings for your camera. Enable Privacy Mask:
The Privacy Mask setting allows you to specify 3 rectangular areas on the cameras image to be blocked/excluded from recordings and snapshots. You may click and drag the mouse cursor over the camera image to draw a mask area. Right click on the camera image to bring up the following menu options:
Disable All: Disables all mask areas Enable All: Enables all mask areas Reset All: Clears all mask areas. Mirror:
This will flip the image horizontally. Flip:
This will flip the image vertically. Power Line:
Select the frequency used by your power lines to avoid interference or distortion. White Balance:
Use the drop-down menu to change the white balance settings to help balance colors in different lighting environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold. D-Link DCS-5222LB1 User Manual 38 Section 4 - Configuration Exposure Mode:
Changes the exposure mode. Use the drop-down box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low Noise option will focus on creat-
ing a high-quality picture without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. Denoise:
This setting controls the amount of noise reduction that will be applied to the picture. Brightness:
This adjusts the brightness of the camera image. Contrast:
This adjusts the contrast of the camera image, making a washed out image clearer or reducing the brightness in an over exposed image. Saturation:
Sharpness:
This adjusts the color saturation. Saturation controls the strength of color in the image. Specify a value from 0 to 8 to specify how much sharpening to apply to the image. Mount type:
Select the correct mounting type from either Ceiling or Desktop to ensure the PTZ controls respond accurately. Note: Mirror and Flip can be used if you have mounted the DCS-5222LB1 on the ceiling. D-Link DCS-5222LB1 User Manual 39 Section 4 - Configuration Audio and Video You may configure up to 3 video profiles with different settings for your camera. Hence, you may set up different profiles for your computer and mobile display. In addition, you may also configure the two-way audio settings for your camera. After making any changes, click the Save button to save your changes.There are three sensor output selections (VGA, XGA, and SXGA). Do not select SXGA if you want to turn on the motion detection feature. Aspect ratio:
Set the aspect ratio of the video to 4:3 standard or 16:9 widescreen. Mode:
Set the video codec to be used to JPEG, MPEG-4, or H.264. Frame size /
View window area:
the Frame size determines total capture resolution, and View window area determines the Live Video viewing window size. If the Frame size is larger than the Live Video size, you can use the ePTZ controls to view the full area. 16:9 1280 x 800, 1280 x 720, 800 x 450, 640 x 360, 480 x 270, 320 x 176, 176 x 144 4:3 1024 x 768, 800 x 600, 640 x 480, 480 x 360, 320 x 240, 176 x 144 Note: If your view window area is the same as your frame size, you will not be able to use the ePTZ function. Maximum frame rate:
A higher frame rate provides smoother motion for videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth. D-Link DCS-5222LB1 User Manual 40 Section 4 - Configuration Video Quality:
This limits the maximum frame rate, which can be combined with the Fixed quality option to optimize the bandwidth utilization and video quality. If fixed bandwidth utilization is desired regardless of the video quality, choose Constant bit rate and select the desired bandwidth. Constant bit rate:
The bps will affect the bit rate of the video recorded by the camera. Higher bit rates result in higher video quality. Fixed quality:
Select the image quality level for the camera to try to maintain. High quality levels will result in increased bit rates. Encoding:
Choose between G.711, G.726 or AAC. Audio in off:
Selecting this checkbox will mute incoming audio. Audio in gain level:
This setting controls the amount of gain applied to incoming audio to increase its volume. Audio out off:
Selecting this checkbox will mute outgoing audio. Audio out volume level:
This setting controls the amount of gain applied to outgoing audio to increase its volume. Note: Video Profile 3 is always set to MJPEG as the Encode Type to ensure that at least one of the Video Profiles are viewable by non-IE browsers. Video Profile 4 is for mobile devices only, and always uses H.264 as the Encode Type. Note: Higher frame size, frame rate and bit rates will give you better video quality, but they will also require more network bandwidth. For best viewing results on a mobile phone, we suggest setting the frame rate to 5 fps and the bit rate to 20 Kbps. Similarly, select appropriate audio encoding for your bandwidth requirements. After making any changes, click the Save Settings button to save your changes, or click the Dont Save Settings button to discard your changes. D-Link DCS-5222LB1 User Manual 41 Section 4 - Configuration PTZ This section allows you to configure the pan and tilt operations of your camera. You can specify the lens location for the Home button, and specify up to 24 pre-set lens locations, allowing you to quickly view these pre-determined areas of the cameras range from the Live Video screen. Pan Speed:
Select the speed at which the camera will pan for a full cycle from the drop-down list. Select a value between 0 and 10, 0 being the slowest setting. Tilt Speed:
Select the speed at which the camera will tilt for a full cycle from the drop-down menu. Select a value between 0 and 10, 0 being the slowest. Preset Name:
Enter a name for your camera location and click Add. Present List:
To add a preset to the sequence, select it from the drop-down box at the bottom of this window, then click the Add button. The preset name will appear in the list. You can rearrange your presets in the sequence by selecting a preset in the sequence, then clicking the arrow buttons to move it higher or lower in the current sequence. Clicking the trash can button will remove the currently selected preset from the sequence. Choose as Home:
Click to set the Home position with the default setting. Auto Pan Speed:
Select the speed at which the camera will pan from the drop-down menu. Select a value between 0 and 10, 0 being the slowest. Click Save when finished. D-Link DCS-5222LB1 User Manual 42 Section 4 - Configuration Motion Detection This option allows you to set up Motion Detection on your network camera. Enable Video Motion:
Check this box to enable the motion detection feature of your camera. Sensitivity:
This setting adjusts how sensitive the camera will be to motion, where 100% will be the most sensitive setting and 0% will be the least sensitive setting. Drawing Mode:
Select Draw Motion Area to select the area of the picture to monitor for movement to trigger recording or snapshot. Use your mouse to click on the blocks that you would like to monitor for motion. Select Erase Motion Area to remove the blocks and stop the camera from monitoring that area of the picture. Clear:
Clicking this button will clear all motion detection zones. After making any changes, click the Save Settings button to save your changes, or click the Dont Save Settings button to discard your changes. Note: If the camera is set to SXGA mode in Audio and Video, Motion Detection is disabled. The red grid on the right indicates an area that has been selected for motion detection. When motion is detected, the LIVE VIDEO page will display a blinking orange motion video icon like the one below. No Motion Motion The motion notification will continue to blink as long as motion is detected. If no additional motion is detected, it will return to its original state after eight seconds. D-Link DCS-5222LB1 User Manual 43 Section 4 - Configuration Sound Detection Enabling Sound Detection will allow your camera to use the built-in microphone to trigger events with audio. If this option is selected, the trigger by option under SD recording, Video Clip, or Snapshot should also be selected. Enable Sound Detection:
Check this box to enable the motion detection feature of your camera. Detection Level:
Specifies the measurable level that would indicate sound. Please enter a value between 50 and 90, the higher the number the more sensitive the camera will be to sound. After making any changes, click the Save Settings button to save your changes, or click the Dont Save Settings button to discard your changes. D-Link DCS-5222LB1 User Manual 44 Section 4 - Configuration This section allows you to configure the settings of the internal system clock for your camera. Time and Date Time Zone:
Select the time zone for your region from the drop-down menu. Enable Daylight Saving:
Check this if the camera is in a region where daylight saving is observed. Auto Daylight Saving:
This option will adjust Daylight Saving Time automatically. Synchronize NTP Server:
Network Time Protocol will synchronize your camera with an Internet time server. You can enter an IP address of a server or select from the drop-down menu. Set the Date and Time Manually:
Copy your Computers Time Settings:
Select this to set the time manually. Click to synchronize the time information from your PC. After making any changes, click the Save Settings button to save your changes, or click the Dont Save Settings button to discard your changes. D-Link DCS-5222LB1 User Manual 45 Section 4: Configuration Event Setup In a typical application, when motion is detected, the DCS-5222LB1 sends images to a FTP server or via e-mail as notifications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, a specified action will be performed. You can configure the network camera to send snapshots or videos to your e-mail address or FTP site. To start plotting an event, it is suggested to configure server and media columns first so that the network camera will know what action shall be performed when a trigger is activated. D-Link DCS-5222LB1 User Manual 46 Section 4 - Configuration The Event Setup page includes 4 different sections. Server Media Event Recording 1. To add a new item - "event, server or media," click Add. A screen will appear and allow you to update the fields accord-
ingly. 2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. D-Link DCS-5222LB1 User Manual 47 Section 4 - Configuration Add Server You can configure up to 5 servers to save snapshots and/or video to. After making any changes, click the Save Settings button to save your changes. Server Name:
Enter the unique name of your server. E-mail:
Enter the configuration for the target e-mail server account. FTP:
Enter the configuration for the target FTP server account. Network Storage:
Specify a network storage device. Only one network storage device is supported. SD Card:
Use the camera's onboard SD card storage. D-Link DCS-5222LB1 User Manual 48 Section 4 - Configuration Add Media There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to save your changes. Media Name:
Enter a unique name for media type you want to create. Snapshot:
Select this option to set the media type to snap-
shots. Source:
Set the video profile to use as the media source. Refer to Audio and Video on 40 Audio and Video for more information on video profiles. Send pre-event image(s) [0~4]:
Set the number of pre-event images to take. Pre-event images are images taken before the main event snapshot is taken. Send post-event image(s) [0~7]:
Set the number of post-event images to take. Post-event images are images taken after the main event snapshot is taken. You can set up to 7 post-event images to be taken. File name prefix:
The prefix name will be added on the file name. Add date and time suffix to file name:
Video clip:
Check it to add timing information as file name suffix. Select this option to set the media type to video clips D-Link DCS-5222LB1 User Manual 49 Section 4 - Configuration Source:
Set the video profile to use as the media source. Refer to Audio and Video on page 51 for more information on video profiles. Pre-event recording:
This sets how many seconds to record before the main event video clip starts. You can record up to 3 seconds of pre-event video. Maximum duration:
Set the maximum length of video to record for your video clips. Maximum file size:
Set the maximum file size to record for your video clips. File name prefix:
This is the prefix that will be added to the file-
name of saved video clips. System log:
Select this option to set the media type to sys-
tem logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-5222LB1 User Manual 50 Section 4 - Configuration Add Event Create and schedule up to 2 events with their own settings here. After making any changes, click the Save Settings button to save your changes. Event name:
Enter a name for the event. Enable this event:
Select this box to activate this event. Priority:
Set the priority for this event. The event with higher priority will be executed first. Delay:
Select the delay time before checking the next event. It is being used for both events of mo-
tion detection and digital input trigger. Trigger:
Specify the input type that triggers the event. Video Motion Detection:
Motion is detected during live video monitor-
ing. Select the windows that need to be moni-
tored. Periodic:
The event is triggered in specified intervals. The trigger interval unit is in minutes. Digital input:
The external trigger input to the camera. System Boot:
Triggers an event when the system boots up. Network Lost:
Triggers an event when the network connec-
tion is lost. D-Link DCS-5222LB1 User Manual 51 Section 4 - Configuration Sound Detection:
Triggers an event when an audio trigger is recorded. Passive Infrared Sensor:
Triggers an event when the PIR sensor is acti-
vated by moving infrared objects even in dark environment. Time:
Select Always or enter the time interval. Trigger D/O:
Select to trigger the digital output for a specific number of seconds when an event occurs. D-Link DCS-5222LB1 User Manual 52 Section 4 - Configuration Add Recording Here you can configure and schedule the recording settings. After making any changes, click the Save Settings button to save your changes. Recording entry name:
Enable this recording:
The unique name of the entry. Select this to enable the recording function. Priority:
Set the priority for this entry. The entry with a higher priority value will be executed first. Source:
The source of the stream. Recording schedule:
Recording settings:
Scheduling the recording entry. Configuring the setting for the recording. Destination:
Select the folder where the recording file will be stored. D-Link DCS-5222LB1 User Manual 53 Section 4 - Configuration Total cycling recording size:
Please input a HDD volume between 1MB and 2TB for recording space. The recording data will replace the oldest record when the total recording size exceeds this value. For example, if each recording file is 6MB, and the total cyclical recording size is 600MB, then the camera will record 100 files in the specified location (folder) and then will delete the oldest file and create new file for cyclical recording. Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other files in the same folder as recording files. Size of each file for recording:
If this is selected, files will be separated based on the file size you specify. Time of each file for recording:
If this is selected, files will be separated based on the maximum length you specify. File Name Prefix:
The prefix name will be added on the file name of the recording file(s). D-Link DCS-5222LB1 User Manual 54 Section 4 - Configuration SD Management This page allows you to browse and manage the recorded files on an SD card which has been inserted into the camera. Note: It is recommended to use the Format SD Card function when inserting an SD card for the first time. Format SD Card:
Click to automatically format the SD Card and create a folder for video. Formatting your SD Card will erase all data currently saved. Delete:
Click the checkbox in front of the Delete button to select files meant for deletion. The Delete button is used to delete the files which are selected. Name:
The name of file recording. Size:
The files size. Refresh:
Click to refresh the page. Files per page:
Select the number of files to be displayed on a single page. The maximum is 100 files. Pages:
Show the current and total number of pages. D-Link DCS-5222LB1 User Manual 55 Section 4 - Configuration Maintenance Admin This section allows you to change the administrators password and configure the server settings for your camera. You can also manage the user account(s) that enable access to your camera. Admin Password Setting:
This section lets you change the admin password used to log into the camera and change settings. After installing the camera for the first time, it is highly recommended that you change the admin password for security purposes. Enter the existing password, then enter your new password. Click Save to apply your new settings. Add User Account:
You may create user accounts to allow others to log into your camera to view the live camera feed. Users cannot change any settings. Enter the User Name you wish to use for the new user account and then create a password for that account. Click Add to save your account. User List:
Select a user from the drop-down menu and click Delete to remove the user account from having access to the camera images. Camera Name:
Enter the name of your camera. This is useful if you have multiple cameras. Enable OSD:
This will enable the information bar On Screen Display (OSD) to appear when viewing video. Label:
This is the text label that will appear on the OSD. D-Link DCS-5222LB1 User Manual 56 Section 4 - Configuration Time Stamp:
If checked, the current time will be displayed on the OSD. Calibrate the Device:
Clicking this button will calibrate the camera so that the P/T/Z apparatus functions correctly. The camera is automatically calibrated whenever it is powered on and initialized or reset. Should the cameras pan, tilt, and zoom functions begin to behave incorrectly, or if the device has been jarred or handled improperly, you may need to recalibrate the camera manually by pressing this button. LED Light:
This will turn the cameras front LED indicator on or off. Privacy Mode:
Select on/off or schedule the privacy mode for your camera to ensure privacy. When the privacy mode is turned on, the camera hides the lens by rolling it back into the unit. After making any changes, click the Save button to save your changes. D-Link DCS-5222LB1 User Manual 57 Section 4 - Configuration System This screen allows you to save and restore the cameras current configuration. You can also reset all settings to the factory default or reboot the device. Save to Local Hard Drive:
Click on the Save Configuration button to save the current configuration to your hard drive. Load from Local Hard Drive:
To load a saved configuration, click on the Browse button to select a configuration file from your hard drive. Then, click the Load Configuration button to load the new configuration. Restore to Factory Defaults:
Click this button to reset all settings to their factory defaults. If you select to reset your settings, you will need to set up your camera again. Schedule Reboot:
Select this option to schedule a time for the device to reboot. Reboot Device:
Clicking the Reboot button will reboot your device. After making any changes, click the Save button to save your changes. D-Link DCS-5222LB1 User Manual 58 Section 4 - Configuration Firmware Upgrade Your current firmware version and date will be displayed on this page. You can also upgrade your firmware with a new version. To upgrade your firmware, go to support.dlink.com and download the latest firmware to your computers hard drive. Click on Browse, select the firmware file, then click the Upload button. While the firmware is being upgraded, do not turn off your computer or camera, and do not disconnect your network connection from your computer or camera. Upgrading the firmware will not change any of your system settings, but it is recommended that you save your system configuration before doing a firmware upgrade. Note: It is recommended that you use a wired connection for your computer and camera when upgrading the firmware. D-Link DCS-5222LB1 User Manual 59 Section 4 - Configuration This screen displays various information about your camera and its current settings. Status Device Info D-Link DCS-5222LB1 User Manual 60 Section 4 - Configuration Log The log shows you a list of events that have happened recently. You can download the log by clicking the Download button, or you can empty the log by clicking the Clear button. D-Link DCS-5222LB1 User Manual 61 Section 4 - Configuration Online help is available at any time by clicking on the Help tab. Help D-Link DCS-5222LB1 User Manual 62 Section 5 - Security Configuring the DCS-5222LB1 with a Router D-Links DCS-5222LB1 is a versatile and cost effective network camera offering both video and audio monitoring. It can also serve as a powerful surveillance system in security applications. The DCS-5222LB1 can be used with any wired or 802.11n/g wireless router. This section explains how to view the camera from either the Internet or from inside your internal network. This step is only needed if you do not wish to take advantage of the built in mydlink functions. Components Needed:
1 DCS-5222LB1 Network Camera 1 Ethernet Cable A wired or wireless router such as the D-Link DIR-655 Wireless Router Ethernet-based PC for system configuration Setting up the DCS-5222LB1 for Use Behind a Router Installing a DCS-5222LB1 Network Camera on your network is an easy 4step procedure:
1. Assign a local IP address to your network camera. 2. View the network camera using your Internet Explorer web browser. 3. Access the router with your web browser. 4. Open virtual server ports to enable remote image viewing. Note: These are manual steps; however, if you decide to use the wizard, it will perform every step automatically. This section is designed to walk you through the setup process for installing your camera behind a router and enable remote video viewing. For the basic setup of the DCS-5222LB1, follow the steps outlined in the Quick Installation Guide. After you have completed the setup of the DCS-5222LB1 outlined in the Quick Installation Guide you will have an operating camera that has an assigned IP Address. Because you are using a router to share the Internet with one or more PCs, the IP Address assigned to the network camera will be a local IP Address. This allows viewing within your Local Area Network (LAN) until the router is configured to allow remote viewing of the camera over the Internet. D-Link DCS-5222LB1 User Manual 63 Section 5 - Security 1. Assign a Local IP Address to Your Camera Run the setup wizard from the CD included with the DCS-5222LB1. Follow the steps in the Quick Installation Guide to configure the DCS-5222LB1. The camera will be assigned a local IP Address that allows it to be recognized by the router. Write down this IP Address for future reference. 2. View the network camera Using Your Internet Explorer Web Browser Open a Web browser. In the address bar, type in the IP Address that was assigned to the network camera. The DCS-5222LB1 Live Video Page appears with a window displaying live video from the camera. Click on the Setup button on the left side. Scroll down the Network Setup page to find the ports used by HTTP and Streaming audio and video. D-Link DCS-5222LB1 User Manual 64 Section 5 - Security The Setup > Network page displays the port settings for your camera. If necessary, these ports can be changed if they are already in use by other devices (e.g. in a multiple camera environment). Note: Both the HTTP port and RTSP port are required to be opened for the DCS-5222LB1. D-Link DCS-5222LB1 User Manual 65 Section 5 - Security Router Set-Up and Installation The following steps generally apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the configuration process. Refer to the routers user manual for more information on router operation and configuration. 3. Access the Router with Your Web Browser If you have cable or DSL Internet service, you will most likely have a dynamically assigned WAN IP Address. Dynamic means that your routers WAN IP address can change from time to time depending on your ISP. A dynamic WAN IP Address identifies your router on the public network and allows it to access the Internet. To find out what your routers WAN IP Address is, go to the Status page on your router and locate the WAN information for your router (as shown on the next page). The WAN IP Address will be listed. This will be the address that you will need to type in your web browser to view your camera over the Internet. Your WAN IP Address will be listed on the routers Status > Device Info page. D-Link DCS-5222LB1 User Manual 66 Section 5 - Security Note: Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your camera from a remote location. The Static IP Address will also allow you to access your camera attached to your router over the Internet. 4. Open Ports to Enable Remote Image Viewing (Port Forwarding) The firewall security features built into the DIR-655 router prevent users from accessing the video from the DCS-5222LB1 over the Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the DCS-5222LB1 are blocked from access over the Internet. Therefore, these ports need to be made accessible over the Internet. This is accomplished using the Virtual Server function on the DIR-655 router. The Virtual Server ports used by the camera must be opened through the router for remote access to your camera. Virtual Server is accessed by clicking on the Advanced tab of the router screen. Follow these steps to configure your routers Virtual Server settings:
1. Click Enabled. 2. Enter a different name for each entry. 3. Enter your cameras local IP Address (e.g., 192.168.0.120) in the Private IP field. 4. Select TCP for HTTP port, both (TCP and UDP) for RTSP and both (TCP and UDP) for 5556 - 5559 ports. 5. If you are using the default camera port settings, enter 80 into the Public and Private Port section, click Apply. 6. Scheduling should be set to Always so that the camera images can be accessed at any time. D-Link DCS-5222LB1 User Manual 67 Section 5 - Security Repeat the previous steps adding the port 554 to both the Public and Private Port sections. A check mark appearing before the entry name will indicate that the ports are enabled. Important: Some ISPs block access to port 80 and other commonly used Internet ports to conserve bandwidth. Check with your ISP so that you can open the appropriate ports accordingly. If your ISP does not pass traffic on port 80, you will need to change the port the camera uses from 80 to something else, such as 8080. Not all routers are the same, so refer to your user manual for specific instructions on how to open ports. Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List to enable your settings. D-Link DCS-5222LB1 User Manual 68 Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DCS-5222LB1. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows Vista and XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.) 1. What is Remote Access? How do I enable it?
Remote Access allows you to access your camera from any PC connected to the Internet through a web browser. This lets you view your camera feed and manage your cameras settings when youre away from home. To enable Remote Access, simply go through the Camera Installation Wizard included on the Installation CD that came in your package. You can also download the wizard from the following websites:
DCS-5222LB1: http://DCS-5222LB1.mydlink.com After going through the wizard, you should see Remote Status: Enabled on the summary page. If you see Remote Status: Disabled, make sure that:
...the front LED on your camera is lit solid green
...your Internet connection is working
...your routers LAN & WAN connections are working properly
...your router has UPnP enabled (if your router does not support UPnP, please refer to Appendix A)
...your router can get a public IP
...your router is upgraded to the latest firmware
...you have tried rebooting your router by unplugging it, then plugging it back in After checking the above items, you can click the Retry button to refresh the summary screen to see if Remote Access has been enabled. 2. What can I do if I forget my password?
If you forget your password, you will need to perform a hard reset of your camera. This process will change all your settings back to the factory defaults. To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 3 seconds while your camera is plugged in. D-Link DCS-5222LB1 User Manual 69 Section 6 - Troubleshooting 3. Why does the LED not light up?
The power supply might be faulty. Confirm that you are using the provided DC 5V power supply for this network camera. Verify that the power supply is correctly connected. If the camera is functioning normally, the LED may have been disabled. See 56 Admin for information about how to enable the LED. 4. Why is the cameras network connection unreliable?
There might be a problem with the network cable. To confirm that the cables are working, PING the address of a known device on the network. If the cabling is OK and your network is reachable, you should receive a reply. Another possible problem may be that the network device such as a hub or switch utilized by the network camera is not functioning properly. Please confirm the power for the devices are well connected and functioning properly. 5. Why does the network camera work locally but not remotely?
This might be caused by a routers firewall protection. Check the Internet firewall with your system administrator. The firewall may need to have some settings changed in order for the network camera to be accessible outside your local LAN. For more information, please refer to the section about installing your camera behind a router. Make sure that the network camera isnt conflicting with any Web server you may have running on your network. The default router setting might be a possible reason. Check that the configuration of the router settings allow the network camera to be accessed outside your local LAN. 6. Why does a series of broad vertical white lines appear through out the image?
It could be that the CMOS sensor (a square panel situated behind the lens that measures the light signals and changes it into a digital format so your computer can present it into an image that you are familiar with) has become overloaded when it has been exposed to bright lights such as direct exposure to sunlight or halogen lights. Reposition the network camera into a more shaded area immediately as prolonged exposure to bright lights will damage the CMOS sensor. 7. The camera is producing noisy images. How can I solve the problem?
The video images might be noisy if the network camera is used in a very low light environments. D-Link DCS-5222LB1 User Manual 70 Section 6 - Troubleshooting 8. The images are poor quality, how can I improve the image quality?
Make sure that your computers display properties are set to at least 6-bit color. Using 16 or 256 colors on your computer will produce dithering artifacts in the image, making the image look as if it is of poor quality. The configuration on the network camera image display is incorrect. The Web Configuration Video section of the Web management allows you to adjust the related-parameters for improved images such as: brightness, contrast, hue and light frequency. Please refer to the Web Configuration section for detailed information. 9. Why are no images available through the Web browser?
ActiveX might be disabled. If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the Internet Options menu. You may also need to change the security settings on your browser to allow the ActiveX plug-in to be installed. If you are using Internet Explorer with a version number lower than 6, then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the network camera. If you are using another browser such as Googles Chrome or Apples Safari, you may need to install the appropriate plugin before the streaming video will work. If you are using Java, you may need to update to the latest version of the Java application. Please visit Suns website in order to obtain the newest version Java for your computer platform (http://www.java.com). You browser may also have 3rd party applications blocked. Please make sure that the browser you are using does not have 3rd party plugin support disabled. You may need to refer to your particular browsers help function in order to turn this functionality on or off. 10. The PIR is not operating well, how can I improve the PIR quality?
- For the Passive Infrared Sensor (PIR) to function properly it is required to have direct line of site to the object. When the room has many obstacles or the line of site is obstructed by glass, the PIR will not function properly.
- When the environment temperature is too high, the PIR detection will slow down and should not be mistaken for a faulty PIR.
- This network camera can only be installed indoors. Do not install this camera in a place where IR interference can be a problem. IR interference can be found close to glass doors or windows, where direct sunlight can cause interference or in the path of car headlights.
- Do not install this camera next to or in front of an air conditioner outlet or vent.
- Do not install this camera close to wireless devices with high frequencies as the PIR is easily affected by RF radiation. D-Link DCS-5222LB1 User Manual 71 Section 6 - Troubleshooting
- The PIR functions at best when detecting lateral movements. Radial movements cannot be detected as well as lateral movements.
- Do not install this camera directly under an extreme bright light. The PIR cannot fully suppress a bright white light.
- Any movements from an object with a normal body temperature, like humans or animals, can be detected. To avoid any malfunctions, install this camera at the proper height.
- To avoid any malfunctions, install this camera in an environment with an average temperature of 25C. Only within a distance of 2.5 meters can smaller movements of an object, with the average adult humans height, be detected. Between a distance of 2.5 and 5 meters, a larger movement of an object is required for detection.
- Install this camera on a firm, static, anti-shock surface. D-Link DCS-5222LB1 User Manual 72 Appendix A - Networking Basics Networking Basics Check your IP address By default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DCS-5222LB1 User Manual 73 Appendix A - Networking Basics Statically Assign an IP Address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows 7- Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows XP - Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway to the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS to the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DCS-5222LB1 User Manual 74 Appendix A: DI/DO Specifications DI/DO Specifications Pin 1 Pin 4 Pin 2 Pin 3 NOTE Uses an open-drain NFET transistor with the source connected to GND in camera. If used with an external relay, a diode must be connected in parallel with the load for protec-
tion against voltage transients. Max loading is 100 mA. DC 5 V Output / Max. 100 mA A switch from DI to GND, activated by setting NO. or NC. GND PIN 1 FUNCTION Digital Out (DO) 2 3 4 DC5V OUTPUT Digital In (DI) GND Internal 5V Power External 3~12V Power GPIO GPIO DI Input PTC 1 PTC 2 DI Input PTC 1 PTC 2 DO Output DO Output D-Link DCS-5222LB1 User Manual DC3 V ~ 12V 75 Appendix A - Technical Specifications Technical Specifications General Specifications Camera Specifications Video Features Video Compression Video Resolution Pan/Tilt/Zoom Audio Compression Network Protocol Support Network Interface External Device Interface 1/4 Megapixel Progressive CMOS sensor 5 meter IR illumination distance Minimum illumination 0 lux with IR LED on Built-in Infrared-Cut Removable (ICR) Filter module Focal length 3.6 mm Aperture: F2 Exposure Time: 1/7.5 sec. to 1/10,000 sec. Angle of view:
(H) 70
(V) 53
(D) 92 Built-in Microphone Configurable image size, quality, frame rate, and bit rate Time stamp and text overlays Configurable motion detection windows Configurable shutter speed, brightness, saturation, contrast, mirror, flip H.264/MPEG4/MJPEG format simultaneous compression H.264/MPEG4 multicast streaming JPEG for still images 16:9 (supports frame rates up to 30 fps) 1280 x 720 800 x 450 640 x 360 480 x 270 320 x 176 at 30 fps Others (supports frame rates up to 30 fps) 1024 x 768 800 x 600 640 x 480 480 x 360 320 x 240 Pan Range: -170 to 170 Tilt Range: -20 to 100 Digital Zoom: 10x G.711 G.726 IPv4/IPv6 ARP TCP UDP ICMP QoS DHCP Client NTP Client (D-Link) DNS Client IEEE 802.11n MicroSD/SDHC Slot3 Audio Output Manual Pan Speed: 5-80 per second Manual Tilt Speed: 5-80 per second Position Presets: 32 points AAC DDNS Client (D-Link) SMTP Client FTP Client HTTP Server PPPoE RTP RTSP RTCP 3GPP 10/100 BASE-TX Fast Ethernet DI/DO Port D-Link DCS-5222LB1 User Manual 76 Appendix A - Technical Specifications Advanced Features Remote Management Security Surveillance Take snapshots/video clips and save to local hard drive via web browser Configuration accessible via web browser Administrator and user group protected Password authentication Record video continuously Record video according to a weekly schedule Record video when motion is detected HTTP and RTSP digest encryption Upload snapshots/video clips via e-mail Upload snapshots/video clips via FTP Mobile App Support mydlink Lite app for iOS and Android devices System Requirements Operating System Compatible Browsers Supported Mobile Devices Physical Dimensions Weight Power Input Temperature Humidity Certifications Microsoft Windows 8/7/Vista/XP SP3 Microsoft Internet Explorer 8, Firefox 12, Chrome 20, Safari 4 or above, or other Java-enabled browser Mobile devices with a 3GPP player, such as Packet Video Player 3.0, QuickTime 6.5, or Real Player 10.5 120 x 103.2 x 130 mm (4.72 x 4.06 x 5.11 inches) 340 grams (0.75 lb) Input: 12 V/1.25 A, 50/60 Hz mydlink app requires a mobile device running iOS or Android Operating: 0 to 40 C (32 to 104 F) Storage: -20 to 70 C (-4 to 158 F) Operating: 20% to 80% non-condensing CE FCC Class B C-Tick CE LVD 3 An SDHC Class 6 card or above is recommended. Card capacities of up to 32GB supported. D-Link DCS-5222LB1 User Manual 77 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance."
Canada Notices Industry Canada regulatory information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance."
Cet quipement doit tre install et utilis conformment aux instructions fournies et de l'antenne (s) utilis pour cet metteur doit tre install pour fournir une distance de sparation d'au moins 20 cm de toute personne et ne doit pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Les utilisateurs finaux et installateurs doivent tre fournir des instructions d'installation de l'antenne et des conditions de fonctionnement du transmetteur de la conformit sur l'exposition aux RF
1 | Internal photos | Internal Photos | 583.04 KiB | December 12 2013 |
INTERNAL PHOTOGRAPHS OF EUT Report No: T131104J01 Page 8 Rev.00 Report No: T131104J01 Page 9 Rev.00 Report No: T131104J01 Page 10 Rev.00 Report No: T131104J01 Antenna Page 11 Rev.00
1 | External photos | External Photos | 451.61 KiB | December 12 2013 |
Report No: T131104J01 EXTERNAL PHOTOGRAPHS OF EUT Page 1 / 11 Rev.00 Report No: T131104J01 Page 2 Rev.00 Report No: T131104J01 Page 3 Rev.00 Report No: T131104J01 Page 4 Rev.00 Report No: T131104J01 Page 5 Rev.00 Report No: T131104J01 AMS3-0502500FU Page 6 Rev.00 Report No: T131104J01 Page 7 Rev.00
1 | Label format and location | ID Label/Location Info | 39.93 KiB | December 12 2013 |
A. US / CAN Figure 1. 51*13mm DCS-5222L P/N: XXXXXXXXXXXXXXX S/N: QEXXXXXXXXXXX MAC: XXXXXXXXXXXXX Figure 2. 33*10mm FCC ID: KA2CS5222LB1 IC: 4216A-CS5222LB1 Model: DCS-5222LB1 mydlink No.: XXXXXXXX H/W Ver.:XX F/W Ver.:X.XX MADE IN TAIWAN (NTSC)
1 | Agent authorization | Cover Letter(s) | 109.11 KiB | December 12 2013 |
No.288, Sinhu Grd Ro., Neihu District, Taipel City 114, Taiwan, R.O.C Date: 2013-06-06 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA FCC ID: KA2C$5222LB1 IC ID : 4216A-CS5222LB1 To whom it may concern:
I, the undersigned, hereby authorize Mr.Stan Lin / Section Manager of Compliance Certification Services Inc. and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Mr. Stan Lin / Section Manager of Compliance Certification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to:
a) b) qd) comply with the relevant provisions of the certification program:
make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
use certification only to indicate the products are certified as being in conformity with specified standards;
No. 289, Sinhu 3rd Rd., Neihu District, Taipel Clty 114, Taiwan, R.COL.C g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
i) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;
2 take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification:
ky document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Robert Lin /Senior Director D-Link Corporation
+886-2-66000123
+886-2-55509988 NO. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114 Taiwan .R.O.C. robert.Lin@dlink.com REMARK:
1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. A 3. Authorized signature must be in agreement with grantee code contact in FCC database.
1 | Agent authorization from grantee | Cover Letter(s) | 252.27 KiB | December 12 2013 |
a=
D-Link No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C April 14, 2011 Power of Attorney To whom it may concern:
|, the undersigned, Michael Boschma, hereby authorize the persons listed below to act in behalf of me to sign all related documents for D-Links FCC application. Wireless Shinglin Chung/Senior Director Broad Band Jerry Chiuan/Senior Manager
+886-2-66000123#5819 +886-2-66000123#2321 shinglin_chung@dlink.com.tw jerry_chiuan@dlink.com.tw Digital home Robert Lin/Senior Director Switch & ML Jean/Senior Director
+886-2-66000123#5820 security +886-2-66000123#5510 robert_lin@dlink.com.tw ml_jean@dlink.com.tw Digital Media KC Hsieh/Director
+886-2-66000123#5850 ke_hsieh@dlink.com.tw Company Name: D-Link Co. Ltd Fax: 886-2-55509988 Company Address: No.289,Sinhu 3 Rd.,Neihu District, Taipei City 114, Taiwan, R.O.C. Authorization period: Jan 1, 2011 ~Dec 31%, 2058 Should you have any question regarding this power of attorney, please dont hesitate to contact me. Sincerely, Mich wt Porsehida Ags | Ut, 20%
Michael Boschma D-Link Co. TEL: (714) 885-6000 FAX: (949) 272-4629 E-mail: Mboschma@dlink.com
1 | Request for confidentiality | Cover Letter(s) | 42.26 KiB | December 12 2013 |
No.289, Sinkhu 3rd Ra., Neihu District, Taipel City 114, Taiwan, R.O.C Date: 2013-11-7 Federal Communications Commission Authorization and Evaluation Division FCC ID | KA2CS5222L 81 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below:
Block Diagram Schematics Operational Description Antenna specification Beye The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Signature Robert Lin /Senior Director D-Link Corporation robert.Linf@dlink.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-12-12 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-12-12
|
||||
1 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 | FCC Registration Number (FRN) |
0007371172
|
||||
1 | Physical Address |
17595 Mt. Herrmann
|
||||
1 |
Fountain Valley, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
KA2
|
||||
1 | Equipment Product Code |
CS5222LB1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B****** A******
|
||||
1 | Title |
General Counsel
|
||||
1 | Telephone Number |
714-8********
|
||||
1 | Fax Number |
866-7********
|
||||
1 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | HD Wireless N Pan/Tilt Network Camera | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. This device supports 20MHz/40MHz bandwidth for 802.11n. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Certification Services Inc.
|
||||
1 | Name |
K**** C******
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
k******@ccsrf.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1875000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC