FCC ID: KA2AP1330A1 N300 Wi-Fi Range Extender

Version 1.00 | 08/05/2015 User Manual N300 Wi-Fi Range Extender DAP-1330 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.00 Date Description August 5th, 2015 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2015 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. This purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet. Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy. Network Standby: 1.2 watts D-Link DAP-1330 User Manual i Table of Contents Introduction .......................................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features .................................................................................... 3 What is a Wireless Extender? ............................................ 4 Hardware Overview ..................................................................... 5 Front/Top ................................................................................. 5 Side and Bottom ................................................................... 6 Wireless Installation Factors ..................................................... 7 Setting Up Your DAP-1330 ................................................8 QRS Mobile App Setup ............................................................... 9 Web-based Configuration .......................................................13 Setup Wizard ....................................................................14 Using the WPS Method ....................................................16 Using the Manual Method ..............................................17 Home Screen ........................................................................20 Extended Wi-Fi Settings ...................................................22 Network Settings ................................................................23 Advanced Settings ........................................................23 Maintenance ................................................................................26 Admin .....................................................................................26 System ....................................................................................27 Upgrade .................................................................................28 Statistics .................................................................................29 Connecting a Wireless Client ..........................................30 WPS Button ...................................................................................30 Connect to a Wireless Network .............................................31 Windows 8 ...........................................................................31 WPA/WPA2 .......................................................................31 Windows 7 ...........................................................................33 WPA/WPA2 .......................................................................33 Windows Vista ....................................................................36 WPA/WPA2 .......................................................................37 Windows XP ........................................................................39 WPA/WPA2 .......................................................................40 Troubleshooting ..............................................................42 Wireless Basics .................................................................44 Tips ...................................................................................................45 Technical Specifications ..................................................46 GPL Code Statement........................................................47 Safety Statements ...........................................................62 D-Link DAP-1330 User Manual ii Table of Contents Introduction Package Contents DAP-1330 N300 Wi-Fi Range Extender Wi-Fi Configuration Card If any of the above items are missing from your package, please contact your reseller. D-Link DAP-1330 User Manual 1 Section 1 - Product Overview System Requirements Network Requirements A wireless router with an active Internet connection. IEEE 802.11n, 802.11g, or 802.11b wireless clients/devices Web-based Configuration Utility Requirements Computer or Mobile Device with the following:

A Windows, Macintosh, Android, or Linux-based operating system Wireless adapter or Wi-Fi functionality Browser Requirements:

Internet Explorer 7 or later Firefox 12.0 or later Safari 4 or later Google Chrome 20.0 or later D-Link DAP-1330 User Manual 2 Section 1 - Product Overview Introduction Features Easily Extend Your Existing Network The DAP-1330 N300 Wi-Fi Range Extender lets you extend a secure wireless network throughout your home. Connect the DAP-1330 to a router and share your high-speed Internet access in more places throughout your home or small office. High-speed Wireless Performance With Wireless N Technology Thanks to the latest Wireless N technology, the DAP-1330 provides a wireless connection at up to 300 Mbps* with other 802.11n wireless devices. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio with smooth performance. Simple Setup Through its easy-to-use web-based user interface, you can quickly and easily connect the DAP-1330 to an uplink router, configure the extender wireless network, and manage the administrative settings. The setup wizard will even guide you through the setup process, getting your extended wireless network up and running in no time. Compatibility The DAP-1330 is still fully compatible with the IEEE 802.11g/b standards, so it can still connect with your older 802.11g/b devices. Latest Wireless Network Security and Encryption The DAP-1330 supports wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA/WPA2 standards ensure that youll be able to use the best possible encryption methods with your compatible wireless devices.

* Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DAP-1330 User Manual 3 Section 1 - Product Overview What is a Wireless Extender?

The DAP-1330 acts as a repeater to extend the range of an existing wireless network to provide better signal for parts of your home or office that may have poor or no reception. Your existing wireless signal will be re-broadcast by the DAP-1330, allowing you to reach the farthest corners of your home or office . The extended network can simply use the same network credentials as the existing network, or you can specify a different network name and password, giving you the flexibility to control network access. Internet Wireless Router Mobile Device DAP-1330 Computer D-Link DAP-1330 User Manual 4 Section 1 - Product Overview Hardware Overview Front/Top 2 1 1 LED Indicator This indicates the current status of the DAP-1330, as detailed in the table below. LED Indicator Power/Status Color Green Red Orange None Status Solid Green Blinking Green Solid Red Description Connection quality is good and device operating normally The device is processing WPS Device is powering ON or system is defective Blinking Orange Cannot connect or provision an IP address from the uplink router Solid Orange Off Connection quality is poor due to poor reception Device is not receiving power. Check the power outlet 2 Antenna This can only be used when extended D-Link DAP-1330 User Manual 5 Section 1 - Product Overview Hardware Overview Side and Bottom 1 2 1 2 WPS Button Pressing the WPS button for 1 second allows you to connect with Wi-Fi clients using Wi-Fi Protected Setup. Reset Button Pressing the reset button will reset the DAP-1330 to the factory default settings. D-Link DAP-1330 User Manual 6 Section 1 - Product Overview Wireless Installation Factors The N300 Wi-Fi Range Extender lets you extend the reach of your existing wireless network, allowing you to work wirelessly from more places in your home or office. Keep in mind, however, that the number, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the extender and other network devices to a minimum - each wall or ceiling can reduce your adapters range by up to 98 feet (30 meters). Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. At a 45-degree angle, a wall that is 0.5 meters thick (1.5 feet) appears to be almost 1 meter (3 feet) thick. At a 2-degree angle it can appear over 14 meters (45 feet) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete can degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DAP-1330 User Manual 7 Section 2 - Configuration Setting Up Your DAP-1330 Plug in the DAP-1330 to a power outlet. Verify that the power LED is blinking orange before continuing. Outlet Ethernet Locate the Wi-Fi name (SSID) and password for your DAP-1330 device. These details are printed on the specification sticker on the underside of the device. Using your computer or mobile devices Wi-Fi connection utility, connect to the SSID of your DAP-1330 and enter the password. If you are unsure of how to connect to a wireless network, please refer to Connect to a Wireless Network on page 31, or consult your devices user manual. Once connected, you are ready to begin the setup process. There are two ways to configure your DAP-1330; using the QRS Mobile app on your smartphone or tablet device, or using the web GUI on your computer. For detailed information on either of the methods for configuring your DAP-1330, refer to the following sections of the manual:

QRS Mobile App Setup on page 9 Web-based Configuration on page 13 D-Link DAP-1330 User Manual 8 Section 2 - Configuration The DAP-1330 can be set up from your iOS or Android smartphone or tablet device using the QRS Mobile app. QRS Mobile App Setup Search for QRS Mobile in the App Store or Google Play, or use your mobile device to scan the QR codes on the right to download the QRS Mobile app from the App Store (left) for your iOS device, or from Google Play (right) for your Android device. Connect to the Wi-Fi network that is displayed on the Wi-Fi Configuration Card included in your package (ex: dlink-a8fa). Then, enter the Wi-Fi password also printed on the Wi-Fi Configuration Card (akbdj1936). For iOS For Android D-Link DAP-1330 User Manual 9 Section 2 - Configuration Once your mobile device is connected, tap on the QRS Mobile icon. Click Start to continue. QRS Mobile will first detect your DAP-1330, then scan for available Wi-Fi networks. Select the network you wish to extend and enter the password if required. D-Link DAP-1330 User Manual 10 Section 2 - Configuration Enter a network name (SSID) and password for the extended Wi-

Fi network. You may keep the existing SSID and password if you wish. Click Next to continue. Create an admin password for the DAP-1330s Web-based configuration utility. Click Next to continue. D-Link DAP-1330 User Manual 11 Section 2 - Configuration A summary of your settings will be displayed. Click Save to reboot the device and to complete the setup. After the setup wizard is complete, the following screen will appear. You can now change your mobile device and laptop Wi-

Fi settings to the wireless network name and password you just created. D-Link DAP-1330 User Manual 12 Section 2 - Configuration Web-based Configuration To access the configuration utility for the DAP-1330 on your PC, first connect to the DAP-1330 wirelessly using the Wi-Fi name

(SSID) and password located on your Wi-Fi Configuration Card. Then open a web browser and enter http://dlinkap.local. in the address bar. You can also use the IP address http://192.168.0.50. Note: If you have multiple DAP-1330 devices on the network, you can access web-based configuration via http://dlinkapxxxx. local. as shown in the included Wi-Fi Configuration Card, with xxxx being the last four digits of the DAP-1330s MAC address. Enter your password. By default, Admin is selected as the username and cannot be changed, and by default, the password is blank. The configuration interface will open, and you can configure the various settings for the DAP-1330. If you have not yet configured and uplink network, the home screen will show that there is no connection between the DAP-1330 and the uplink router. For detailed information on manually setting up your DAP-1330 to extend an existing wireless network, refer to Using the Manual Method on page 17. D-Link DAP-1330 User Manual 13 Section 2 - Configuration Setup Wizard If you wish to configure your extender to connect to the Internet

, please run the setup wizard. This wizard is designed to guide you through a step-by-step process to configure your new N300 Wi-Fi Range Extender to extend your wireless network and connect to the Internet. Click Next to continue. If you already have a Wi-Fi network set up and you want to configure your Wi-Fi network settings manually, go to Settings at the top of your browser window and select Extender from the drop-down menu to set up the connection between your DAP-1330 and the uplink router. To set up the extended Wi-Fi network, select Extender. D-Link DAP-1330 User Manual 14 Section 3 - Web-based Configuration Select whether you want to use the WPS (Wireless Protected Setup) method or the manual method to set up an extended wireless network using your DAP-1330 or set up the access point mode. D-Link DAP-1330 User Manual 15 Section 3 - Web-based Configuration Using the WPS Method DAP-1330 will ask you to press the WPS push button on the access point or router you want to connect the DAP-1330 to. You have 120 seconds to press the button on your access point or router. If a connection has been successfully made, the LED on the device will turn solid green. D-Link DAP-1330 User Manual 16 WPS Button Section 3 - Web-based Configuration Using the Manual Method To set up your network manually, select the Extended an existing wireless network from the setup wizard menu. The DAP-1330 will first scan for available Wi-Fi networks and list the networks it has found. D-Link DAP-1330 User Manual 17 Section 3 - Web-based Configuration Enter the password for your uplink network. Click Next to continue, or click Back to return to the previous step. The DAP-1330 will re-broadcast the Wi-Fi connection from the uplink router as an extended Wi-Fi network. Enter the SSID and password that you wish to apply to the extended Wi-Fi network. If you would like the uplink router Wi-Fi network and the extended Wi-Fi network to have the same SSID and password, check the box at the bottom of the screen. Click Next to continue, or click Back to return to the previous step. D-Link DAP-1330 User Manual 18 Section 3 - Web-based Configuration Enter a custom password for administration of the extender. The setup process is now complete. A summary page will appear showing the settings for both the connection to the uplink router, and the extended Wi-Fi network. It is recommended that you make a record of this information for future reference. Click Finish to exit the wizard and return to the home screen. D-Link DAP-1330 User Manual 19 Section 3 - Web-based Configuration Home Screen The home screen gives a summary of the current status of devices connected to the DAP-1330. A green check between devices indicates that there is an active connection. A red cross indicates that there is no connection present, or there is a connection error. At any time, you can click on the device images on the home screen to view the current status of each device. D-Link DAP-1330 User Manual 20 Section 3 - Web-based Configuration If there is no connection between the DAP-1330 and the uplink router, you can run the wizard to search for an available uplink router. You can view the details of both the uplink router network and the extended Wi-Fi network by clicking on the DAP-1330 icon. D-Link DAP-1330 User Manual 21 Section 3 - Web-based Configuration Extended Wi-Fi Settings This page lets you configure the settings for the DAP-1330s extended wireless network. To access this page, click on the Settings drop-down menu at the top of the page, and select Extended Wi-Fi. Existing network Existing Network:

Select the uplink type. Wi-Fi Name(SSID):

Enter the name of your router or click Scan to select from a list. Security:

Select None, WEP, or WPA/WPA2-Personal encryption depending on the security of your router. Password:

Enter the router Wi-Fi network password. 2.4GHz Extended Wi-Fi Status:

Enable or disable Access Point. D-Link DAP-1330 User Manual 22 Section 3 - Web-based Configuration Network Settings This page lets you configure the network settings for the DAP-1330. To access this page, click on the Settings drop-down menu at the top of the page, and select Network. Click Save at any time to save the changes you have made on this page. Device Name: You can change the name of the device by editing the text in the text box. If you change the name of the device, you will need to enter http://xxxx.local. (where xxxx corresponds to the name of the device) in the address bar of your web browser in order to access the configuration utility. The Advanced Settings section of the Network Settings page allows you to configure both IPv4 and IPv6 settings which will be used by the DAP-1330s extended network. IPv4 Device Management interface - You can select either a Dynamic or Static IPv4 configuration:

Advanced Settings My LAN Connection is:

Here you can select whether you want the IP to have a Dynamic IP or Static IP address. If you select Dynamic IP, the options below will not be available. IP Address:

Enter the Static IP address that you want to assign to the extended network AP. This address should be outside of the uplink routers DHCP address pool. Subnet Mask:

Enter the subnet mask. Gateway Address:

Enter the gateway address. This is usually the IP address of the uplink router. Primary DNS Server:

Enter the address of the primary DNS server. Secondary DNS Server:

Enter the address of the secondary DNS server. This is optional but will provide backup if the primary server fails. D-Link DAP-1330 User Manual 23 Section 3 - Web-based Configuration IPv6 Device Management Interface - You can select an Autoconfiguration (dynamic), Static IP, or Link-local IPv6 configuration:

My IPv6 Connection is:

Select Autoconfiguration (SLAAC/DHCPv6) to have the DAP-1330 automatically receive an IPv6 address from the uplink router. Obtain DNS Server Address:

You can select to obtain IPv6 DNS server information automatically, or you can select to configure DNS servers manually. Primary DNS Server:

Enter the primary IPv6 DNS server address. Secondary DNS Server:

Enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. My IPv6 Connection is:

Select Static IPv6 to manually assign an IP address to the DAP-1330. IPv6 Address:

Enter the IPv6 address that you want to assign to the extended network AP. This address should be outside of the uplink routers DHCP address pool. Subnet Prefix Length:

Enter the length of the IPv6 subnet prefix. Default Gateway:

Enter the default gateway. Primary DNS Server:

Enter the primary IPv6 DNS server address. Secondary DNS Server:

Enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails. D-Link DAP-1330 User Manual 24 Section 3 - Web-based Configuration My IPv6 Connection is:

Select Link-local only to only set an IPv6 address for the local network. LAN IPv6 Link-

Local Address:

The link-local address of the DAP-1330. D-Link DAP-1330 User Manual 25 Section 3 - Web-based Configuration Maintenance Admin This page will allow you to set a new password for the administrator account used to configure the DAP-1330. You can also enable graphical authentication (CAPTCHA) on this page. To access this page, click on the Management drop down menu at the top of the page, and select Admin. Click Save at any time to save the changes you have made on this page. Admin Password:

Enable Graphical Authentication:

Enter the Admin password. Click on the slider to enable graphical authentication, or CAPTCHA. This provides an extra layer of security by requiring you to enter a code that is displayed on-screen. This can help prevent unauthorized users from gaining access to your wireless network using automated methods. D-Link DAP-1330 User Manual 26 Section 3 - Web-based Configuration This page allows you to save or restore your system configuration, reset or reboot the DAP-1330. To access this page, click on the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes you have made on this page. System Save Settings To Local Hard Drive:

Save the system settings onto a file to the local hard drive. You will then see a file dialog where you can select a location and file name for the settings. Load Settings From Local Hard Drive:

Restore to Factory Default Settings:

Reboot the Device:

Load the system settings from a file on the local hard drive. Restore the system settings to factory default settings. This will erase all currently stored settings. Click Reboot to reboot the DAP-1330. D-Link DAP-1330 User Manual 27 Section 3 - Web-based Configuration Firmware and language upgrades may be provided for the DAP-1330 in future. You can check for and upgrade your firmware and language pack on this page. To access this page, click on the Management drop down menu at the top of the page, and select Upgrade. Click Save at any time to save the changes you have made on this page. Upgrade Firmware Information:

This section displays the currently installed firmware version, as well as the date on which the current firmware version was released. Check For New Firmware:

Click Check For New Firmware to find out if there is new or updated firmware. If there is, you can download it to your computer. Language Pack Information:

This section will show the details of any language packs currently installed. Upgrade Firmware:

Click Select File to locate the firmware file on your local device and perform a manual firmware upgrade. Add a Language Pack:

Click Select File to locate a language pack file on your local device and add the language pack to the user interface. D-Link DAP-1330 User Manual 28 Section 3 - Web-based Configuration This page displays details about your wireless and network connections. To access this page, click on the Management drop down menu at the top of the page, and select Statistics. Statistics Wi-Fi:

Click on the Wi-Fi tab to display the statistics for the connection between the DAP-1330 and the uplink router. Extended Wi-Fi:

Click on the Extended Wi-Fi tab to display the statistics for the connection between the DAP-1330 and any connected clients. Clear:

Click the Clear button to reset the statistics. D-Link DAP-1330 User Manual 29 Section 3 - Web-based Configuration Connecting a Wireless Client WPS Button WPS (Wi-Fi Protected Setup) is a simple and secure way to connect your wireless devices with the DAP-1330. Most wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DAP-1330. Please refer to the user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:

Step 1 - Press the WPS button on the DAP-1330 for about 1 second. The LED on the device will start to blink. You can also use the WPS option in the setup wizard section of the web interface. Step 2 - Within 120 seconds, press the WPS button on your wireless device. Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and your wireless connection will be secured with WPA2. D-Link DAP-1330 User Manual 30 Section 4 - Connecting a Wireless Client Connect to a Wireless Network Windows 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DAP-1330 User Manual 31 Section 4 - Security You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. When you have established a successful connection with a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link DAP-1330 User Manual 32 Section 4 - Security Windows 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DAP-1330 User Manual 33 Section 4 - Connecting a Wireless Client 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DAP-1330 User Manual 34 Section 4 - Connecting a Wireless Client 5. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-1330 User Manual 35 Section 4 - Connecting a Wireless Client Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Are Available bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click Connect. If you get a good signal but cannot access the Internet, check the TCP/

IP settings for your wireless adapter. Refer to Troubleshooting on page 42 for more information. D-Link DAP-1330 User Manual 36 Section 4 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-1330 User Manual 37 Section 4 - Connecting a Wireless Client 3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-1330 User Manual 38 Section 4 - Connecting a Wireless Client Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/

IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-1330 User Manual 39 Section 4 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-1330 User Manual 40 Section 4 - Connecting a Wireless Client 3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DAP-1330 User Manual 41 Section 4 - Connecting a Wireless Client Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1330. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why cant I access the web-based configuration utility?

When entering the IP address of the N300 Wi-Fi Range Extender (dlinkap.local for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:

Internet Explorer 7 or later Firefox 12.0 or later Safari 4 or later Google Chrome 20.0 or later Make sure that you are connected to the same wireless network which is listed on the base of the DAP-1330. If you have an active wired LAN Ethernet connection, try temporarily unplugging the Ethernet cable from the computer you are using, as this may eliminate possible conflicts from having two simultaneous connections on the same computer. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DAP-1330 User Manual 42 Section 5 - Troubleshooting Configure your Internet settings:

Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management interface. Open your web browser and enter the address of your extender (http://dlinkap. local) in the address bar. This should open the login page for your web management. If the DAP-1330 is not connected to an uplink router, you can try accessing the web interface using the default IP address http://192.168.0.50. If you still cannot access the configuration, unplug the extender from the power outlet for at least 10 seconds and plug it back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?

If you forgot your password, you must reset your extender. Unfortunately this process will change all your settings back to the factory defaults. To reset the extender, locate the reset button (hole) on the underside panel of the unit. With the extender powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the extender will go through its reboot process

(indicated by the LED turning Orange). Wait about 30 seconds to access the extender. The default IP address is http://dlinkap. local. When logging in, the username is admin and leave the password box empty. D-Link DAP-1330 User Manual 43 Section 5 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely and conveniently access your network. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapters used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DAP-1330 User Manual 44 Appendix A - Wireless Basics Tips Here are a few things to keep in mind when you are installing your N300 Wi-Fi Range Extender. Centralize the extenders location For best performance, make sure you place the extender in a centralized location within your desired usage area. Try to place the extender so that there are minimal obstructions between it and the uplink router. If possible, use an elevated power outlet, so the signal can be dispersed more easily. If you have a large home or usage area, you may need several extenders in order to achieve optimal coverage. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the extender. This can significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let your neighbors or intruders connect to your wireless network. Secure your wireless network by utilizing the WPA or WEP security feature on the extender and uplink router. Refer to the relevant sections of this manual for further details. D-Link DAP-1330 User Manual 45 Appendix A - Wireless Basics Technical Specifications Operating Humidity 0% to 90% non-condensing Power Input AC 110-240 V Maximum Power Consumption 2.8W Certifications EMI/EMC FCC CE IC C-Tick UL Wi-Fi Certified Dimensions 75 * 55 *34 mm Weight 69 grams (0.152 lb) Standards IEEE 802.11n IEEE 802.11g IEEE 802.11b Wireless Frequency Range 1 2.4 GHz to 2.4835 GHz Antenna External Antenna Security Wi-Fi Protected Access (WPA/WPA2) WPS (PBC) Wired Equivalent Privacy (WEP) 64/128-bit Advanced Features QRS Mobile setup app for iOS and Android devices Device Management Web UI Diagnostic LEDs Status/WPS/Signal Operating Temperature 0 to 40 C (32 to 104 F) 1 Frequency range varies depending on local regulations D-Link DAP-1330 User Manual 46 Appendix B - Technical Specifications GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:

http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL. WRITTEN OFFER FOR GPL AND LGPL SOURCE CODE Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to:

Email: GPLCODE@DLink.com Snail Mail:

Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. D-Link DAP-1330 User Manual 47 Appendix C - GPL Code Statement Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps:

(1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers and authors protection, the GPL clearly explains that there is no warranty for this free software. For both users and authors sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. D-Link DAP-1330 User Manual 48 Appendix C - GPL Code Statement Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. This License refers to version 3 of the GNU General Public License. Copyright also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. The Program refers to any copyrightable work licensed under this License. Each licensee is addressed as you. Licensees and recipients may be individuals or organizations. To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a modified version of the earlier work or a work based on the earlier work. A covered work means either the unmodified Program or a work based on the Program. To propagate a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To convey a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work

(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. D-Link DAP-1330 User Manual 49 Appendix C - GPL Code Statement 1. Source Code. The source code for a work means the preferred form of the work for making modifications to it. Object code means any non-source form of a work. A Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The System Libraries of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A Major Component, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The Corresponding Source for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the works System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. D-Link DAP-1330 User Manual 50 Appendix C - GPL Code Statement 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license oth-

erwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed;

section 10 makes it unnecessary. 3. Protecting Users Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the works users, your or third parties legal rights to forbid circumvention of technological measures. D-Link DAP-1330 User Manual 51 Appendix C - GPL Code Statement 4. Conveying Verbatim Copies. You may convey verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:

a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to keep intact all notices. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilations users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. D-Link DAP-1330 User Manual 52 Appendix C - GPL Code Statement 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:

a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. D-Link DAP-1330 User Manual 53 Appendix C - GPL Code Statement A User Product is either (1) a consumer product, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, normally used refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. Installation Information for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. D-Link DAP-1330 User Manual 54 Appendix C - GPL Code Statement 7. Additional Terms. Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work). You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:

a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. D-Link DAP-1330 User Manual 55 Appendix C - GPL Code Statement All other non-permissive additional terms are considered further restrictions within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights D-Link DAP-1330 User Manual 56 Appendix C - GPL Code Statement from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An entity transaction is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the partys predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. D-Link DAP-1330 User Manual 57 Appendix C - GPL Code Statement 11. Patents. A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributors contributor version. A contributors essential patent claims are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributors essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a patent license is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. Knowingly relying means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipients use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. D-Link DAP-1330 User Manual 58 Appendix C - GPL Code Statement A patent license is discriminatory if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. D-Link DAP-1330 User Manual 59 Appendix C - GPL Code Statement 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxys public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. D-Link DAP-1330 User Manual 60 Appendix C - GPL Code Statement 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DAP-1330 User Manual 61 Appendix C - GPL Code Statement Safety Statements CE Mark Warning:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTICE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. D-Link DAP-1330 User Manual 62 Appendix D - Safety Statements IC statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. D-Link DAP-1330 User Manual 63 Appendix D - Safety Statements NCC MPE (MPE) 1mW/cm2 0.082226mW/cm2 D-Link DAP-1330 User Manual 64 Appendix D - Safety Statements