DCS-2800LH and H100 D-Link Corporation DCS-2800LH and DCS-H100 Users Manual Version 1.0 March 09th, 2018 Page 1 DCS-2800LH and H100 D-Link Corporation Table of Contents 1. PRODUCT DESCRIPTION .................................................................................. 3 2. APPEARANCE ..................................................................................................... 3 3. APPLICATIONS ................................................................................................... 4 4. INSTALLATIONS ................................................................................................ 5 Page 2 DCS-2800LH and H100 D-Link Corporation 1. PRODUCT DESCRIPTION DCS-2800LH is a battery powered network camera for consumer SOHO surveillance application. This camera adopts 2 mega-pixel progressive scan CMOS sensor; the video stream covers a larger scene and better quality than an analog CCTV camera. It is designed for indoor/outdoor Day/Night applications, thus, the camera itself built-in IR LED which can support 7.5m distance in dark environment. DCS-H100 is a hub working with DCS-2800LH to provide a better performance in power consumption and video analysis. When motion detection is enabled by motion sensor (PIR), the camera starts recording to DCS-H100 (SD card, external HDD, or cloud) automatically as soon as they detect motion. When user wants to check the live view of camera, the camera starts streaming output to DCS-H100 (SD card, external HDD, or cloud) as soon as it is waked. Recorded video is stored in the DCS-H100 (SD card, external HDD, or cloud), so you can see all the activity of cameras detect at any time. 2. APPEARANCE DCS-2800LH Camera Front LED: Status indicator PIR window Page 3 DCS-2800LH and H100 D-Link Corporation Side Sync button Rear Micro USB: Power jack, Vdc 5V/2A DCS-H100 Front Top Side Rear LED: Status indicator Siren Sync button Micro SD slot Reset button LAN USB Power on/off button Power jack, Vdc 12V/1.5A 3. APPLICATIONS Page 4 DCS-2800LH and H100 D-Link Corporation 4. INSTALLATIONS Step 1 Download mydlink App to your smart phone and register an account to login. Step 2 Install DCS-H100: scan the QR code on device label of DCS-H100 or directly select model DCS-H100 on the menu of App. Step 3 Follow the instructions shown on the App to set up DCS-H100. or Page 5 DCS-2800LH and H100 D-Link Corporation Step 4 Add Camera: Click the Sync button on the Hub first. Then, click the Sync button on the camera within 2 minutes. Once sync up successfully, the LED of camera will become solid green. (The solid green will keeps for 10 seconds, then off.) Step 5 Follow the instructions shown on the App to set up DCS-2800LH cameras (up to 4 cams can be added per hub.) Page 6 DCS-2800LH and H100 D-Link Corporation Step 6 Functionalities of Hub and Camera Page 7 DCS-2800LH and H100 D-Link Corporation Page 8 DCS-2800LH and H100 D-Link Corporation Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that Increase the separation between the equipment and receiver. to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Page 9 DCS-2800LH and H100 D-Link Corporation Industry Canada statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Cet appareil est conforme la norme RSS-310 d'Industrie Canada. L'opration est soumise la condition que cet appareil ne provoque aucune interfrence nuisible. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The County Code Selection feature is disabled for products marketed in the US/
Canada. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Page 10