FCC ID: KA2DI-624 Wireless 2.4GHz mini-PCI Mobile Module

GL2454MP-0I MiniPCI Wireless Adapter Date of Issue: Jan. 16th, 2002 Technical Support The firmware version of the GL2454MP-0I MiniPCI Wireless Adapter is displayed on the utility About window. Users could download and upgrade the most recent software version from the suppliers web site or refer to the selling contact for the latest software information. If you have difficulty resolving the problem while installing or using the GL2454MP-0I MiniPCI Wireless Adapter, please contact the supplier for support. About This Manual GL2454MP-0I MiniPCI Wireless Adapter Users Manual is first published on January, 2003. The manual includes procedures for the setup of the GL2454MP-0I MiniPCI Wireless Adapter under Windows XP, Windows 2000, Windows NT, Windows 98SE or Windows ME. Take a moment to read through this manual and familiarize yourself with wireless technology. Table of Contents Chapter 1 About MiniPCI Wireless Adapter ......................................1 1-1 Features and Benefits................................................................................... 1 1-2 Applications.................................................................................................. 2 1-3 Product Kit ................................................................................................... 3 1-4 About MiniPCI Wireless Adapter LED Indicators ...................................... 3 Chpater 2 Getting Started .....................................................................3 2-1 Before Installation........................................................................................ 4 2-2 Insert the GL2454MP-0I MiniPCI Wireless Adapter .................................. 4 Chapter 3 Install Driver for Windows .................................................5 3-1 Set up MiniPCI Wireless Adapter for Windows XP..................................... 5 3-2 Set up MiniPCI Wireless Adapter for Windows 2000................................ 10 3-3 Set up MiniPCI Wireless Adapter for Windows NT!

3-4 Set up MiniPCI Wireless Adapter for Windows 98SE/ ME ....................... 13 Chpater 4 Configure the MiniPCI Wireless Adapter .......................19 4-1 Install the WLAN Utility............................................................................. 19 4-2 Use the WLAN Utility................................................................................. 21 Limited Warranty ................................................................................31 About MiniPCI Wireless Adapter 1 The 802.11g MiniPCI Wireless Adapter is a standard PCI Card that fits into any standard PCI slot in a desktop computer. Moreover, the GL2454MP-0I MiniPCI Wireless Adapter provides a solution to connect the desktop computer to a wireless network for the desktop user. Its 54Mbps data rate gives equivalent Ethernet speed to access corporate network or the Internet in a wireless environment. In addition, a detachable antenna version is specifically designed for system integrator application. When installed, GL2454MP-0I MiniPCI Wireless Adapter is able to communicate with any 802.11g compliant products. 1-1 Features and Benefits 1. Supports 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48 and 54 Mbps data rate. 2. Working range up to 800 ft. in an open environment. 3. Seamless connectivity to wired Ethernet and PC network LANs augments existing networks quickly and easily. 4. Greater flexibility to locate or move networked PCs. 5. Wireless connection without the cost of cabling. 6. Easy to install and user friendly, just Plug and Play. 7. Supports a variety of operating systems (Win98SE/ME/2000/XP) 8. 64-bit and 128-bits WEP encryption capable. 9. Provides Window-based Diagnostic Tools, most notably, Site Survey, Link Quality Test and Access Point Browser.

-1-

1-2 Applications GL2454MP-0I MiniPCI Wireless Adapter offers a fast, reliable, cost-effective solution for wireless client access to the network in applications like these:

1. Remote access to corporate network information E-mail, file transfer and terminal emulation. 2. Difficult-to-wire environments Historical or old buildings, asbestos installations, and open area where wiring is difficult to deploy. 3. Frequently changing environments Retailers, manufacturers and those who frequently rearrange the workplace and change location. 4. Temporary LANs for special projects or peak time

- Trade shows, exhibitions and construction sites where a temporary network will be practical.

- Retailers, airline and shipping companies need additional workstations during peak period.

- Auditors requiring workgroups at customer sites. 5. Access to database for mobile workers Doctors, nurses, retailers, accessing their database while being mobile in the hospital, retail store or office campus. 6. SOHO (Small Office and Home Office) users SOHO users need easy and quick installation of a small computer network. 7. High security connection The secure wireless network can be installed quickly and provide flexibility.

-2-

1-3 Product Kit GL2454MP-0I MiniPCI Wireless Adapter comes with the following items. Please go through each item below. If any of listed items appears to be damaged or missing, please contact your local dealer. GL2454MP-0I MiniPCI Wireless Adapter

GL2454MP-0I MiniPCI Wireless Adapter....... x 1

11Mbps PCI Card Software and Product CD...... x 1

GL2454MP-0I MiniPCI Wireless Adapter User Manual....... x 1 1-4 About Wireless LAN PC Card LED Indicators The GL2454MP-0I MiniPCI Wireless Adapter has a LED indicator. The behavior of the indicators is described as below:

Link LED

Solid Green Associated with the Access Point or Ad-Hoc wireless workstation.

Blinking Green Not connecting to the Access Point or Ad-Hoc wireless workstation. LINK

-3-

Getting Started 2 This chapter describes the instructions that guide you through the proper installation of your GL2454MP-0I MiniPCI Wireless Adapter for the Windows XP/2000/98SE/ME operating systems. The complete installation of the GL2454MP-0I MiniPCI Wireless Adapter consists of the following steps:

STEP 1: Insert the PCI adapter into the PCI slot STEP 2: Install the corresponding driver and utility. STEP 3: Set basic settings. STEP 4: Finish Installation. 2-1 Before Installation In addition to the items shipped with the client adapter, you will also need the following in order to install the adapter:

1. A computer equipped with a PCI slot. 2. Windows XP/2000/98SE/ME (with a Windows installation CD-ROM for use during installation) 3. Minimum 5 Mbytes free disk space for installing driver and utility program. 2-2 Insert the GL2454MP-0I MiniPCI Wireless Adapter To install the GL2454MP-0I MiniPCI Wireless Adapter, please do the following:

1. Find an available PCI slot on your computer. 2. Insert the PCI Adapter into the PCI slot.

-4-

Install Driver for Windows 3 This section describes the installation of the GL2454MP-0I MiniPCI Wireless Adapter driver for the Windows 98SE/ME/2000 and Windows XP operating systems. The installation procedures for Windows XP refer to 3-1 Set up MiniPCI Wireless Adapter for Windows XP;

for Windows 2000 please see 3-2 Set up MiniPCI Wireless Adapter for Windows 2000; for Windows 98SE/ME refer to 3-3 Set up MiniPCI Wireless Adapter for Windows 98SE/ME. Note: Before you start the installation, you are advised to keep the Windows CD-

ROM in case you might need certain system files. 3-1 Set up MiniPCI Wireless Adapter for Windows XP Step 1: Insert the GL2454MP-0I MiniPCI Wireless Adapter into the PCI slot on your desktop and start Windows. Windows will auto-detect the MiniPCI Wireless Adapter and a Found New Hardware Wizard window will show up. Select Install from a list or specific location

(Advanced) to install the driver.

-5-

Step 2: Insert the Product CD-ROM into the CD-ROM drive. Specify the location where the driver is placed. Click on Next to install the driver. Step 3: The windows will find MiniPCI Wireless Adapter and start copying corresponding files into the system. Click on Next to continue.

-6-

Step 4: Click Finish to complete the installation. Step 5: Right click My Computer from Start, select Properties, go to the Hardware tab and click the Device Manager button to see if any error icon appears next to the Network adapters/MiniPCI Wireless Adapter. If no, your MiniPCI Wireless Adapter is working well. Check if there is any error icon next to the MiniPCI Wireless Adapter

-7-

After installing the MiniPCI Wireless Adapter, the Windows XP will display a Wireless Network Connection # message. Click on the message and the Automatic Wireless Network Configuration will then appear automatically and allow users to connect to an available wireless infrastructure network (Access Point), shown as follows. You may click the Advanced button to make advanced configuration for the MiniPCI Wireless Adapter, shown as below.

-8-

For more information on using the automatic wireless network configuration please refer to Windows XP Help file. If you desire to use our WLAN Utility, you need to disable the Windows XP Automatic Wireless Network Configuration first by un-checking this check However, the WLAN Utility, which comes with the MiniPCI Wireless Adapter, provides you more tools to configure the MiniPCI Wireless Adapter and monitor the wireless connection. For more information on installing and using the WLAN Utility, please refer to the following sections Install the WLAN Utility and Use the WLAN Utility. Note: To use the WLAN utility under Windows XP, you need to disable the Automatic Wireless Network Configuration first. Steps are described as follows:

Right click the Network Connections icon. Select Properties.

Go to the Wireless Networks tab.

Uncheck the Use Windows to configure my wireless network settings check box and click the OK button (see the above picture).

-9-

3-2 Set up MiniPCI Wireless Adapter for Windows 2000 Step 1: Insert the GL2454MP-0I MiniPCI Wireless Adapter into the PCI slot on your desktop and start Windows. Windows will auto-detect the MiniPCI Wireless Adapter. Step 2: A Found New Hardware Wizard window shows up. Click Next to proceed.

-10-

Step 3: Select Search for a suitable driver for my device (recommended). Step 4: Insert the Product CD-ROM into the CD-ROM drive. Specify the location where the driver is placed. Click on Next to install the driver.

-11-

Step 5: The windows will find Network Controller. Click on Next to continue. Step 6: Click Finish to complete the installation.

-12-

Step 7: Open Control Panel/System/Device Manager, and check Network Adapters to see if any error icon appears. If no, your GL2454MP-0I MiniPCI Wireless Adapter is working well. Check if there is any error icon next to the MiniPCI Wireless Adapter 3-3 Set up Wireless LAN PC Card for Windows 98SE/ ME Step 1: Insert the GL2454MP-0I MiniPCI Wireless Adapter into the PCI slot on your desktop and start Windows. Windows will auto-detect new hardware and will display an Add New Hardware Wizard window. Click Next to continue.

-13-

Step 2: Select Search for the best driver for your device (Recommended) and click Next. Step 3: Insert the Product CD-ROM into the CD-ROM drive. Select the CD-ROM drive check box and click on Next to install the driver.

-14-

Step 4: The Windows will find MiniPCI Wireless Adapter. Click Next to continue. Step 5: Once the [Please insert the disk labeled Windows 98 Second Edition CD-ROM/ME CD-ROM, and then click OK] window appears, inset enter the path corresponding to the appropriate drives and click OK. Usually these files can be found at C:Windows or

-15-

C:Windows\system.

-16-

Step 6: Click Finish to complete the software installation. Step 7: Restart the computer.

-17-

Step 8: Open Control Panel/System/Device Manager, and check Network Adapters to see if any error icon appears next to the MiniPCI Wireless Adapter. If no, your GL2454MP-0I MiniPCI Wireless Adapter is working well. Check if there is any error icon next to the MiniPCI Wireless Adapter

-18-

Configure the Wireless LAN PC Card 4 This chapter gives you assistance with detailed configuration for the GL2454MP-0I MiniPCI Wireless Adapter under Windows XP/2000/NT/98SE/ME. 4-1 Install the WLAN Utility To install the WLAN Utility, follow these steps:

Step 1: Insert the Product CD-ROM or floppy disk again. Step 2: Go to the utility folder and run setup.exe. Step 3: The InstallShield Wizard will show up and guide you through the rest of the setup process. Run the Setup Utility Choose Destination Location and click Next to continue

-19-

Select a program folder and click Next You may add a shortcut in the startup folder as desired Upon completion, go to Program Files and run the WLAN Utility and its icon will appear in the System Tray in the bottom right corner of your task bar. Clicking on the icon will open the configuration window. When you minimize the window, the system tray icon will be loaded in the System Tray again. The color behind the system tray icon indicates the link status:

Blue indicates a good or excellent link. Yellow indicates a usable but weak link. Red indicates no or very poor link quality. When you minimize the window, the system tray icon will be loaded in the System Tray again.

-20-

4-2 Use the WLAN Utility The WLAN Utility enables you to make configuration changes and perform user-level diagnostics on your GL2454MP-0I MiniPCI Wireless Adapter the Windows XP/2000/NT/98SE/ME operating system environments. The WLAN Utility consists of window with 5 items for you to monitor and configure the GL2454MP-0I MiniPCI Wireless Adapter: Configuration, Link Test, AP Browser, Site Survey and About. in Configuration:

The Configuration item allows you to modify the configuration parameters for the GL2454MP-

0I MiniPCI Wireless Adapter such as Profile, Network Type, Ad-Hoc Channel, Transmit Rate, ESSID, WEP, RTS/CTS, Fragment Threshold, and Power Save mode. Furthermore, you may monitor the current status of the MiniPCI Wireless Adapter such as State, Current Channel, Current Tx Rate, Throughput, Link Quality and Signal Strength.

-21-

Profile The Profile field allows you to set values for all parameters by selecting a previously defined profile. To create the profile, go to the Profile field, type a profile name and set the corresponding parameters. If one of the profiles is no longer used, you may remove it by clicking the Delete button. After changing parameters, save the profile and click the Apply button to take effect. You can have multiple profiles and modify the profile at any time. Alternatively, you may choose the profile by right clicking the system tray icon on the task bar, making the configuration more friendly and efficient. You may right click the WLAN system tray icon to choose the pre-set profiles Network Type There are 3 network types for the GL2454MP-0I MiniPCI Wireless Adapter to operate. If you need to access company network or Internet via Access Point, select Infrastructure. To set up a group of wireless stations for file and printer sharing, select Pseudo AdHoc or 802.11 AdHoc (without Access Point). If Pseudo Ad-Hoc (without access point) is selected, you need to set wireless stations with the same channel. For 802.11 AdHoc, the same ESS ID is required to the wireless stations.

-22-

ESSID The ESS ID is the unique ID used by Access Points and stations to identify a wireless LAN. Wireless clients associating to any Access Point must have the same ESSID. The default setting is ANY, which allows your MiniPCI Wireless Adapter to automatically associate to any Access Point (Infrastructure mode) in the vicinity of your wireless adapter. Alternatively, you may check the ESS ID check box to specify the ESS ID. It will then attempt to associate with Access Points or stations with the same ESS ID. The ESS ID can be set up to 32 characters and is case sensitive. Check here before entering the ESS ID If there two Access Points with the same ESSID, you may check the BSS ID check box and enter the MAC address of the Access Point you desire to connect to. Check here before entering the BSS ID Transmit Rate The GL2454MP-0I MiniPCI Wireless Adapter provides various data rate options for you to select. Data rates options include Fully Auto, 2 Mbps, 1 or 2 Mbps, 5.5 Mbps, and 11 Mbps. In most networking scenarios, you will see that the factory-set default Fully Auto will prove the most efficient. This setting will allow your GL2454MP-0I MiniPCI Wireless Adapter to operate at the maximum data rate. When the communications quality drops below a certain level, the PCI Card will automatically switch to a lower data rate. Transmission at lower data speeds are usually more reliable. However, when the communications quality improves again, the GL2454MP-0I MiniPCI Wireless Adapter will gradually increase the data rate again, until it has reached the highest available transmit rate.

-23-

WEP To prevent unauthorized wireless stations from accessing data transmitted over the network, the WLAN Utility offers highly secure data encryption, known as WEP, making your data transmission over air more secure. To activate the WEP Encryption, check the WEP Enabled check box. An Encryption window will then appear. The instructions are as follows:

Pull down the Encryption (WEP) menu and select either 64bit or 128bit encryption method.

Specify the encryption keys. There are two methods to set the WEP keys, as described below:

Create Encryption Keys by Using a Passphrase To create encryption keys by using a passphrase, click the Create Key with Passphrase check box and type a character string in the Passphrase field. As you type, the utility uses an algorithm to generate 4 keys automatically. Select either the 64bit or 128bit encryption first, and type a string in the Create Key with Passphrase field. Select one key from the 4 WEP keys and click OK. Then click the Apply button on the Configuration tab to make the setting take effect. Create Encryption Keys Using a Passphrase (128bit)

-24-

Create Encryption Keys Manually You can also create encryption keys manually by clicking the Create Keys Manually check box. For 64bit encryption you may choose:

Alphanumeric: 5 characters (case sensitive) ranging from a-z, A-Z and 0-9 (e.g. MyKey)

Hexadecimal: 10 hexadecimal digits in the range of A-F, a-f and 0-9 (e.g. 11AA22BB33) For 128bit encryption you may choose:

Alphanumeric: 13 characters (case sensitive) ranging from a-z, A-Z and 0-9

(e.g. MyKey12345678)

Hexadecimal: 26 hexadecimal digits in the range of A-F, a-f and 0-9 (e.g. 00112233445566778899AABBCC). After entering the WEP keys in the key field, select one key as active key, click the OK button and then click the Apply button on the Configuration tab to make the setting take effect. Create Encryption Keys Manually (64bit) Note: The WEP key must be set up exactly the same on the Wireless LAN stations as they are on the wireless Access Points. If you set MyKey for the Wireless LAN PC Card, the same WEP Key MyKey must be assigned to the Access Point or other stations.

-25-

Advanced The WLAN Utility also offers the advanced configuration for user to set the GL2454MP-0I MiniPCI Wireless Adapter under certain network environment. These advanced options include Power Management, RTS/CTS and Fragmentation Threshold. To enable the advanced configuration, go to the Configuration tab and click the Advance button. Power Management The Power Save option is designed to conserve battery life of you computer. When Power Save is enabled, your GL2454MP-0I MiniPCI Wireless Adapter will go into sleep mode to minimize power consumption. Note: When power saving mode is enabled, the Access Points you use need to support power saving as well so that the communication can be established. RTS Threshold RTS Threshold is a mechanism implemented to prevent the Hidden Node problem. Hidden Node is a situation in which two stations are within range of the same Access Point, but are not within range of each other. The following figure illustrates an example of the Hidden Node problem. Both stations (STA) are within range of the Access Point, however, they cannot hear each other. Therefore, they are hidden nodes for each other. When a station starts data transmission with the Access Point, it might not notice that the other station is already using the wireless medium. When these two stations send data at the same time, they might collide when arriving simultaneously at the Access Point. The collision will most certainly result in a loss of messages for both stations.

-26-

Thus, the RTS Threshold mechanism provides a solution to prevent data collisions. When you enable RTS Threshold on a suspect hidden station, this station and its Access Point will use a Request to Send/Clear to Send protocol (RTS/CTS). The station will send an RTS to the Access Point, informing that it is going to transmit the data. Upon receipt, the Access Point will respond with a CTS message to all station within its range to notify all other stations to defer transmission. It will also confirm the requestor station that the Access Point has reserved it for the time-frame of the requested transmission. If the Hidden Node problem is an issue, please specify the packet size. The RTS mechanism will be activated if the data size exceeds the value you set. It is highly recommended that you set the value ranging from 0 to 1500. The default value is Disable. Note: Enabling RTS Threshold would cause redundant network overhead that could negatively affect the throughput performance instead of providing a remedy. Frag. Threshold Fragmentation mechanism is used for improving the efficiency when high traffic flows along in the wireless network. If your GL2454MP-0I MiniPCI Wireless Adapter often transmit large files in wireless network, you can enable the Fragmentation Threshold by clicking the Enable button and the mechanism will split the packet. The value can be set from 256 to 1500. The default value is Disable. IRQ NO./IO Address To avoid device conflict, you may modify the IRQ No. and IO Address for your device (Only available under Windows NT).

-27-

Status:

The Status field on the Configuration menu provides the following information. State: When operating in Infrastructure mode, this field shows the MAC address of the Access Point with which the MiniPCI Wireless Adapter is communicating. When operating in Ad-

Hoc mode, it shows the virtual MAC address used by computers participating in the Ad-Hoc network. Current Channel: Shows the channel on which the connection is made. Current Tx Rate: Shows the highest transmit rate of the current association. Throughput: Shows the short term transmit and receive throughput in bytes/second, and is continuously updated. Link Quality: Based on the quality of the received signal of the Access Point beacon. There are 5 states of link quality:

100%~80%: Excellent link. 80%~60%: Good link quality. 60%~40%: Fair link quality. Under 40%: Poor or no connection. Signal Strength: Based on the received signal strength measurement of the baseband processor of the Beacon signal. Same as link quality, there are 5 states of signal strength:

100%~80%: Excellent signal strength. 80%~60%: Good signal strength. 60%~40%: Fair signal strength. Under 40%: Poor or no signal strength. You can click the Rescan button to force the radio to rescan all available channels. If your link quality or signal strength is poor, rescanning can be used to push the radio off a weak Access Point and search for a better link with another Access Point.

-28-

Link Test:

The Link Test tool helps you examine data transmission quality between your GL2454MP-0I MiniPCI Wireless Adapter and any workstation on the network. By entering IP address of 2 remote station, setting ping interval and packet size, you may know whether communication has been made successfully or not. Additionally, you may run the loopback test by clicking the Look back button to verify the communication quality between your wireless station and Access Point. The Refresh button is used for setting the counters back to 0. AP Browser:

By clicking the Rescan button, the AP Browser can display Access Points around the working environment. Besides showing the ESSID of each Access Point, it also displays BSSID, Channel, Signal, Quality and Supported Rates. To join any of the displayed Access Points, highlight the Access Point you desire to connect and then click the Join BSS (when there are more than 2 Access Points with the same ESSID), or Join ESS button to join the group.

-29-

Site Survey:

When the Site Survey screen is displayed, the channel quality of all 14 radio channels will be displayed. These channel quality measurements are shown on each gauge for the 14 radio channels. The blue bar indicated the channel quality is clear and good. The higher the blue bar is, the better quality you have (i.e., less interference). The yellow bar indicates the channel quality is fair and the red bar indicates the channel is busy or having severe interference. About:

The About item shows the versions of the Wireless LAN Utility, driver, firmware of the GL2454MP-0I MiniPCI Wireless Adapter. Also, the MAC address and frequency domain are displayed.

-30-

Limited Warranty This Warranty constitutes the sole and exclusive remedy of any buyer or resellers equipment and the sole and exclusive liability of the supplier in connection with the products and is in lieu of all other warranties, express, implied or statutory, including, but not limited to, any implied warranty of merchantability of fitness for a particular use and all other obligations or liabilities of the supplier. In no even will the supplier or any other party or person be liable to your or anyone else for any damages, including lost profits, lost savings or other incidental or consequential damages, or inability to use the software provided on the software media even if the supplier or the other party person has been advised of the possibility of such damages. The following are special terms applicable to your hardware warranty as well as services you may use during part of the warranty period. Your formal Warranty Statement, including the warranty applicable to our Wireless LAN products, appears in the Quick Installation Guide which accompanies your products. Duration of Hardware Warranty: One Year Replacement, Repair or Refund Procedure for Hardware:

If your unit needs a repair or replacement, return it to your dealer/distributor in its original packaging. When returning a defective product for Warranty, always include the following documents:

The Warranty Repair Card

A copy of the invoice/proof of purchase, and

The RMA Report Form (To receive a Return Materials Authorization form (RMA), please contact the party from whom you purchased the product). Upon proof-of-purchase we shall, at its option, repair or replace the defective item at no cost to the buyer. This warranty is contingent upon proper use in the application for which the products are intended and does not cover products which have been modified without the resellers approval or which have been subjected to unusual physical or electrical demands or damaged in any way.

-31-

Please complete the information below and include it along with your products. Name:

Title:

Company:

Telephone:

Fax:

Email:

City/State/Zipcode:

Country:

Product Name:

Serial Number:

MAC Address:

Invoice Date:

Product Description:

If you have any further questions, please contact your local authorized reseller for support.

-32-

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Connect the equipment into an outlet on a circuit different from that Increase the separation between the equipment and receiver. to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

-33-

This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example: Router, Access Point). The final end product must be labeled in a visible area with the following: Contains TX FCC ID: KA2DI-624. Manual Information That Must be Included The users manual for OEM integrators must include the following information in a prominent location IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter.

-34-