| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual | Users Manual | 4.12 MiB | ||||
| 1 | Cover Letter(s) | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | External Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | RF Exposure Info | |||||||
| 1 | Test Report | |||||||
| 1 | Test Setup Photos |
| 1 | Users Manual | Users Manual | 4.12 MiB |
Table of Content D-Link DSL-2740B User Manual 1 Table of Content Table of Contents PACKAGE CONTENTS .....................................................................................................4 SYSTEM REQUIREMENTS................................................................................................5 INTRODUCTION ..............................................................................................................6 FEATURES ......................................................................................................................7 HARDWARE OVERVIEW .................................................................................................8 Connections ...........................................................................8 LEDs........................................................................................9 INSTALLATION ............................................................................10 BEFORE YOU BEGIN ...................................................................................................10 INSTALLATION NOTES................................................................................................. 11 INFORMATION YOU WILL NEED FROM YOUR ADSL SERVICE PROVIDER....................13 INFORMATION YOU WILL NEED ABOUT DSL-2740B..................................................15 WIRELESS INSTALLATION CONSIDERATIONS.............................................................17 DEVICE INSTALLATION................................................................................................18 POWER ON ROUTER....................................................................................................18 NETWORK CONNECTIONS...........................................................................................19 1. CONFIGURATION ....................................................................21 1-1 WEB-BASED CONFIGURATION UTILITY................................................................21 SETUP .......................................................................................................................23 WIZARD.................................................................................23 INTERNET SETUP ................................................................28 WIRELESS.............................................................................31 ADVANCED ..............................................................................................................49 PORT FORWARDING............................................................49 APPLICATION RULES...........................................................50 QOS SETUP ..........................................................................51 Quality of Service Setup can be used to improve data flow for different applications by prioritizing the network traffic based on selected criteria. ....................................................................51 OUTBOUND FILTER..............................................................54 WIRELESS FILTER ...............................................................56 DNS SETUP...........................................................................57 FIREWALL & DMZ ................................................................ 59 ADVANCED INTERNET ........................................................ 61 ADVANCED WIRELESS ....................................................... 63 ADVANCED LAN................................................................... 65 SNMP SETUP ....................................................................... 66 REMOTE MANAGEMENT..................................................... 67 ROUTING SETUP ................................................................. 69 TR-069 .................................................................................. 70 WIFI PROTECTED SETUP................................................... 71 POWER MANAGEMENT ...................................................... 72 MAINTENANCE ....................................................................................................... 73 PASSWORD.......................................................................... 73 SAVE/RESTORE SETTINGS ................................................ 74 FIRMWARE UPDATE............................................................ 75 SYSTEM LOG ....................................................................... 77 SCHEDULE................................................................................................................ 79 STATUS ...................................................................................................................... 80 DEVICE INFO........................................................................ 80 CONNECTED CLIENTS........................................................ 83 STATISTICS .......................................................................... 84 ROUTE INFO ........................................................................ 87 TROUBLESHOOTING ................................................................. 88 WIRELESS BASICS .................................................................... 90 NETWORKING BASICS .............................................................. 93 CHECK YOUR IP ADDRESS............................................................................................ 93 STATICALLY ASSIGN AN IP ADDRESS........................................................................... 94 TECHNICAL SPECIFICATIONS .................................................. 95 FCC CAUTION ............................................................................. 96 IC CAUTION................................................................................. 97 D-Link DSL-2740B User Manual 2 Table of Content CONTACTING TECHNICAL SUPPORT.......................................98 D-Link DSL-2740B User Manual 3 Section 1 - Product Overview Package Contents DSL-2740B Wireless ADSL Router 2 non-detachable Antennas(MIMO 2x2) Power Adapter CD-ROM with Installation Wizard, User Manual, and Special Offers One twisted-pair telephone cable used for ADSL connection One straight-through Ethernet cable One Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DSL-2740B will cause damage and void the warranty for this product. D-Link DSL-2740B User Manual 4 System Requirements Section 1 - Product Overview 1. ADSL Internet service Computer with:
200MHz Processor 64MB Memory CD-ROM Drive Ethernet Adapter with TCP/IP Protocol Installed Windows win7/vista/XP/2000 MAC OS Internet Explorer v6 or later, FireFox v1.5 2. D-Link Click's Connect Utility Computer with:
Windows win7/vista/XP/2000 D-Link DSL-2740B User Manual 5 Section 1 - Product Overview 11 Introduction HIGH-SPEED ADSL2/2+ INTERNET CONNECTION Latest ADSL2/2+ standards provide Internet transmission of up to 24Mbps downstream, 1Mbps upstream. HIGH-PERFORMANCE WIRELESS Embedded 802.11n technology for high-speed wireless connection, complete compatibility with 802.11b/g wireless devices TOTAL SECURITY Firewall protection from Internet attacks, user access control, WPA/WPA2 wireless security. ULTIMATE INTERNET CONNECTION The DSL-2740B ADSL2+ router is a versatile, high-performance remote router for home and the small office. With integrated ADSL2/2+ supporting up to 24Mbps download speed, firewall protection, Quality of Service (QoS), 802.11n wireless LAN and 4 Ethernet switch ports, this router provides all the functions that a home or small office needs to establish a secure and high-speed remote link to the outside world. ULTIMATE WIRELESS CONNECTION WITH MAXIMUM SECURITY This router provides maximize wireless performance by connecting this router to computer interfaces and stay connected from virtually anywhere at home and in the office. The router can be used with 802.11b/g/n wireless networks to enable significantly improved reception. It supports WPA/WPA2 and WEP for flexible user access security and data encryption methods. FIREWALL PROTECTION & QoS Security features prevents unauthorized access to the home and office network, be it from the wireless devices or from the Internet. The router provides firewall security using Stateful Packet Inspection (SPI) and hacker attack logging for Denial of Service (DoS) attack protection. SPI inspects the contents of all incoming packet headers before deciding what packets are allowed to pass through. Router access control is provided with packet filtering based on port and source/destination MAC/IP addresses. For Quality of Service (QoS), the router supports multiple priority queues to enable a group of home or office users to experience the benefit of smooth network connection of inbound and outbound data without concern of traffic congestion. This QoS support allows users to enjoy high ADSL transmission for applications such as VoIP and streaming multimedia over the Internet.
*Maximum wireless signal rate derived from IEEE standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DSL-2740B User Manual 6 Section 1 - Product Overview Features Faster Wireless Networking - The DSL-2740B provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. Compatible with 802.11b and 802.11g Devices - The DSL-2740B is still fully compatible with the IEEE 802.11b and g standards, so it can connect with existing 802.11b and g PCI, USB and Cardbus adapters. DHCP Support - Dynamic Host Configuration Protocol automatically and dynamically assigns all LAN IP settings to each host on your network. This eliminates the need to reconfigure every host whenever changes in network topology occur. Network Address Translation (NAT) - For small office environments, the DSL-2740B allows multiple users on the LAN to access the Internet concurrently through a single Internet account. This provides Internet access to everyone in the office for the price of a single user. NAT improves network security in effect by hiding the private network behind one global and visible IP address. NAT address mapping can also be used to link two IP domains via a LAN-to-LAN connection. Precise ATM Traffic Shaping - Traffic shaping is a method of controlling the flow rate of ATM data cells. This function helps to establish the Quality of Service for ATM data transfer. High Performance - Very high rates of data transfer are possible with the Router. Up to 24Mbps downstream bit rate using the G.dmt standard. (For ADSL2+) Full Network Management - The DSL-2740B incorporates SNMP (Simple Network Management Protocol) support for web-based management and text-based network management via Telnet connection. Easy Installation - The DSL-2740B uses a web-based graphical user interface program for convenient management access and easy set up. Any common web browser software can be used to manage the Router.
*Maximum wireless signal rate derived from IEEE standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DSL-2740B User Manual 7 Section 1 - Product Overview Hardware Overview Connections ADSL port Use the ADSL cable to connect to the your telephone line (RJ-11 port) Wireless On/Off switch button Please press and hold on for 3 seconds to turn on/turn off. Reset button To manually reset, depress button with the power on for between ten and fifteen seconds Ethernet ports Use the Ethernet ports to connect the Router to your Ethernet LAN or Ethernet devices Power button Push in to power-on the Router. Push again to power-off the Router Power insert Use the adapter shipped with the Router to connect to power source D-Link DSL-2740B User Manual 8 Section 1 - Product Overview Hardware Overview LEDs Power Steady green light indicates the unit is powered on. When the device is powered off this remains dark. WLAN Steady green light indicates a wireless connection. A blinking green light indicates activity on the WLAN DSL Steady green light indicates a valid ADSL connection. This will light after the ADSL negotiation process has been settled. A blinking green light indicates activity on the WAN (ADSL) interface. LAN A solid green light indicates a valid link on startup. These lights blink when there is activity currently passing through the Ethernet port. Internet Steady green light indicates a successful Internet connection. Steady red light indicates failed Internet connection. Dark if no WAN protocol is configured. D-Link DSL-2740B User Manual 9 Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the necessary information and equipment on hand before beginning the installation. D-Link DSL-2740B User Manual 10 Section 2 - Installation Installation Notes In order to establish a connection to the Internet it will be necessary to provide information to the Router that will be stored in its memory. For some users, only their account information (Username and Password) is required. For others, various parameters that control and define the Internet connection will be required. You can print out the two pages below and use the tables to list this information. This way you have a hard copy of all the information needed to setup the Router. If it is necessary to reconfigure the device, all the necessary information can be easily accessed. Be sure to keep this information safe and private. Low Pass Filters Since ADSL and telephone services share the same copper wiring to carry their respective signals, a filtering mechanism may be necessary to avoid mutual interference. A low pass filter device can be installed for each telephone that shares the line with the ADSL line. These filters are easy to install passive devices that connect to the ADSL device and/or telephone using standard telephone cable. Ask your service provider for more information about the use of low pass filters with your installation. Operating Systems The DSL-2740B uses an HTML-based web interface for setup and management. The web configuration manager may be accessed using any operating system capable of running web browser software, including Windows 98 SE, Windows ME, Windows 2000, and Windows XP. Web Browser Any common web browser can be used to configure the Router using the web configuration management software. The program is designed to work best with more recently released browsers such as Opera, Microsoft Internet Explorer version 6.0, Netscape Navigator version 6.2.3, or later versions. The web browser must have JavaScript enabled. JavaScript is enabled by default on many browsers. Make sure JavaScript has not been disabled by other software (such as virus protection or web user security packages) that may be running on your computer. Ethernet Port (NIC Adapter) Any computer that uses the Router must be able to connect to it through the Ethernet port on the Router. This connection is an Ethernet connection and therefore requires that your computer be equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet port already installed. Likewise, most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment. If your computer does not have an Ethernet port, you must install an Ethernet NIC adapter before you can use the Router. If you must install an adapter, follow the installation instructions that come with the Ethernet NIC adapter. D-Link DSL-2740B User Manual 11 Section 2 - Installation 802.11 Wireless LAN Configuration All the 802.11 wireless LAN settings may be configured on a single page using the web-based manager. For basic wireless communication you need to decide what channel to use and what SSID to assign. These two settings must be the same for any wireless workstations or other wireless access point that communicate with the DSL-2740B through the wireless interface. Security for wireless communication can be accomplished in a number of ways. The DSL-2740B supports WPA (Wi-Fi Protected Access), WPA2, and mixed WPA/WPA2. Wireless access can also be controlled by selecting MAC addresses that are allowed to associate with the device. Please read the section on Wireless Configuration. Additional Software It may be necessary to install software on your computer that enables the computer to access the Internet. Additional software must be installed if you are using the device a simple bridge. For a bridged connection, the information needed to make and maintain the Internet connection is stored on another computer or gateway device, not in the Router itself. If your ADSL service is delivered through a PPPoE or PPPoA connection, the information needed to establish and maintain the Internet connection can be stored in the Router. In this case, it is not necessary to install software on your computer. It may however be necessary to change some settings in the device, including account information used to identify and verify the connection. All connections to the Internet require a unique global IP address. For bridged connections, the global IP settings must reside in a TCP/IP enabled device on the LAN side of the bridge, such as a PC, a server, a gateway device such as a router or similar firewall hardware. The IP address can be assigned in a number of ways. Your network service provider will give you instructions about any additional connection software or NIC configuration that may be required. D-Link DSL-2740B User Manual 12 Section 2 - Installation Information you will need from your ADSL service provider Username This is the Username used to log on to your ADSL service providers network. It is commonly in the form user@isp.co.uk. Your ADSL service provider uses this to identify your account. Password This is the Password used, in conjunction with the Username above, to log on to your ADSL service providers network. This is used to verify the identity of your account. WAN Setting / Connection Type These settings describe the method your ADSL service provider uses to transport data between the Internet and your computer. Most users will use the default settings. You may need to specify one of the following WAN Setting and Connection Type configurations (Connection Type settings listed in parenthesis):
PPPoE/PPoA (PPPoE LLC, PPPoA LLC or PPPoA VC-Mux) Bridge Mode (1483 Bridged IP LLC or 1483 Bridged IP VC Mux) MER (Dynamic IP Address) (1483 Bridged IP LLC or 1483 Bridged IP VC-Mux) IPoA/MER (Static IP Address) (Bridged IP LLC, 1483 Bridged IP VC Mux, 1483 Routed IP LLC, 1483 Routed IP VC-Mux or IPoA) Modulation Type ADSL uses various standardized modulation techniques to transmit data over the allotted signal frequencies. Some users may need to change the type of modulation used for their service. The default DSL modulation (ADSL2+ Multi-Mode) used for the Router automatically detects all types of ADSL, ADSL2, and ADSL2+ modulation. However, if you are instructed to specify the modulation type used for the Router, you may choose among the numerous options available on the Modulation Type drop-down menu on the ADSL Configuration window (Advanced > ADSL) Security Protocol This is the method your ADSL service provider will use to verify your Username and Password when you log on to their network. Your Router supports the PAP and CHAP protocols. D-Link DSL-2740B User Manual 13 Section 2 - Installation VPI Most users will not be required to change this setting. The Virtual Path Identifier (VPI) is used in conjunction with the Virtual Channel Identifier (VCI) to identify the data path between your ADSL service providers network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface. VCI Most users will not be required to change this setting. The Virtual Channel Identifier (VCI) used in conjunction with the VPI to identify the data path between your ADSL service providers network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface. D-Link DSL-2740B User Manual 14 Section 2 - Installation Information you will need about DSL-2740B Username This is the Username needed access the Routers management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is admin. The user cannot change this. Password This is the Password you will be prompted to enter when you access the Routers management interface. The default Password is admin. The user may change this. LAN IP addresses for the DSL-2740B This is the IP address you will enter into the Address field of your web browser to access the Routers configuration graphical user interface (GUI) using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will be the base IP address used for DHCP service on the LAN when DHCP is enabled. LAN Subnet Mask for the DSL-2740B This is the subnet mask used by the DSL-2740B, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later. D-Link DSL-2740B User Manual 15 Section 2 - Installation Information you will need about your LAN or computer:
Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-2740B to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DSL-2740B to connect to other computer or Ethernet devices. DHCP Client status Your DSL-2740B ADSL Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask, and a default gateway address to computers on your LAN. The default range of IP addresses the DSL-2740B will assign are from 192.168.1.2 to 192.168.1.254. Your computer (or computers) needs to be configured to Obtain an IP address automatically (that is, they need to be configured as DHCP clients.) It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-2740B Wireless ADSL Router. D-Link DSL-2740B User Manual 16 Section 2 - Installation Wireless Installation Considerations DSL-2740B lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1.1.1.1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2.2.2.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3.3.3.3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4.4.4.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5.5.5.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DSL-2740B User Manual 17 Section 2 - Installation Device Installation The DSL-2740B Wireless ADSL Router maintains three separate interfaces, an Ethernet LAN, a wireless LAN and an ADSL Internet (WAN) connection. Carefully consider the Routers location suitable for connectivity for your Ethernet and wireless devices. You must have a functioning broadband connection via a bridge device such as a Cable or ADSL modem in order to use the Routers WAN function. Place the Router in a location where it can be connected to the various devices as well as to a power source. The Router should not be located where it will be exposed to moisture, direct sunlight or excessive heat. Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard. As with any electrical appliance, observe common sense safety procedures. The Router can be placed on a shelf, desktop, or other stable platform. If possible, you should be able to see the LED indicators on the front if you need to view them for troubleshooting. Power on Router The Router must be used with the power adapter included with the device. 1.1.1.1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source. 2.2.2.2. Push down the Power button, and you should see the Power LED indicator light up and remain lit. 3.3.3.3. If the Ethernet port is connected to a working device, check the Ethernet Link/Act LED indicators to make sure the connection is valid. The Router will attempt to establish the ADSL connection, if the ADSL line is connected and the Router is properly configured this should light up after several seconds. If this is the first time installing the device, some settings may need to be changed before the Router can establish a connection. D-Link DSL-2740B User Manual 18 Section 2 - Installation Factory Reset Button The Router may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following sequence:
1.1.1.1. Press and hold the reset button while the device is powered off. 2.2.2.2. Turn on the power. 3.3.3.3. Wait for 10~15 seconds and then release the reset button. Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device settings will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the default management Username is admin and the default Password is admin. Network Connections Connect ADSL Line Use the ADSL cable included with the Router to connect it to a telephone wall socket or receptacle. Plug one end of the cable into the ADSL port
(RJ-11 receptacle) on the rear panel of the Router and insert the other end into the RJ-11 wall socket. If you are using a low pass filter device, follow the instructions included with the device or given to you by your service provider. The ADSL connection represents the WAN interface, the connection to the Internet. It is the physical link to the service providers network backbone and ultimately to the Internet. Connect Router to Ethernet The Router may be connected to a single computer or Ethernet device through the 10BASE-TX Ethernet port on the rear panel. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10/100 Mbps only. When connecting the Router to any Ethernet device that is capable of operating at speeds higher than 10Mbps, be sure that the device has auto-negotiation (NWay) enabled for the connecting port. Use standard twisted-pair cable with RJ-45 connectors. The RJ-45 port on the Router is a crossed port (MDI-X). Follow standard Ethernet guidelines when deciding what type of cable to use to make this connection. When connecting the Router directly to a PC or server use a normal straight-through cable. You should use a crossed cable when connecting the Router to a normal (MDI-X) port on a switch or hub. Use a normal straight-through cable when connecting it to an uplink (MDI-II) port on a hub or switch. The rules governing Ethernet cable lengths apply to the LAN to Router connection. Be sure that the cable connecting the LAN to the Router does not exceed 100 meters. D-Link DSL-2740B User Manual 19 Section 2 - Installation Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in this diagram. If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable. Computer to Router Connection You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using the Ethernet cable provided as shown in this diagram. D-Link DSL-2740B User Manual 20 Section 3 - Configuration 1. Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. 1-1 Web-based Configuration Utility Connect to the Router To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the Router. The next section describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.1.1). Picture a -1 D-Link DSL-2740B User Manual 21 Section 3 - Configuration Type admin for the User Name and admin in the Password field. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. Picture a-2 D-Link DSL-2740B User Manual 22 Section 3 - Configuration This chapter is concerned with using your computer to configure the WAN connection. The following chapter describes the various windows used to configure and monitor the Router including how to change IP settings and DHCP server setup. SETUP WIZARD ADSL SETUP Click on the Setup Wizard button to launch the Setup Wizard. WELCOME TO D-LINK SETUP WIZARD There are four steps to configuring your router. Click on the Next button to continue. D-Link DSL-2740B User Manual 23 Section 3 - Configuration STEP 1: CHANGE YOUR DSL-2740B PASSWORD The default password is "admin", in order to secure your network, please modify the password. Note: Confirm Password must be same as "New Password". Of course, you can click on the Skip to ignore the step. STEP 2: SELECT INTERNET CONNECTION TYPE Please select your Country and ISP Provider, VPI/VCI, Connection Type. If you can not find the country and ISP in the list below; you can select
"Others", and then input the "VPI" and "VCI and Connection Type. Please enter the VPI/VCI numbers if provided by the ISP. Click on the Next button to go to the next Setup Wizard window. D-Link DSL-2740B User Manual 24 Section 3 - Configuration STEP 2: SELECT INTERNET CONNECTION TYPE Please Type IP Address, Subnet Mask and Default Gateway which are provided by your ISP. Select to Enable or Disable in the Obtain default gateway automatically option. If you choose Disable in the Obtain default gateway automatically option, please type Primary DNS Server and Secondary DNS Server which could also be provided by your ISP. D-Link DSL-2740B User Manual 25 Section 3 - Configuration STEP 3: SET TIME AND DATE TIME SETTING:
Please enable the Automatically synchronize with Internet time servers if you want to use time server. You can use the default time server web site or type any web server name you want on the First NTP time server and the Second NTP time server. Please select the time zone of your country on the Time Zone option. If you need to use the daylight saving, just choose the Enable Daylight Saving. Daylight saving is a period from late Spring to early Fall. Set how many hours to change the time for Daylight saving Offset. Configure Daylight Saving Dates, Daylight Saving time starts in the most parts of the United States on the second Sunday of March. Each time zone in the United States starts Daylight Saving time at 2 A.M. Thus, in the United States you must use March, Second, Sunday, at 2:00 A.M. Daylight Saving time starts in the European Union on the last Sunday of March. Thus, in European Union, you must select March, Last, Sunday. The time must depend on your countrys time zone. For example, In Germany you must type 2 because Germanys time zone is 1 hour ahead of GMT or UTC (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. Daylight Saving time ends in the most parts of the United States on the First Sunday of November. Each time zone in the United States must use D-Link DSL-2740B User Manual 26 Section 3 - Configuration Daylight Saving time at 2:00 A.M. Thus, in the United States you must set November, First, Sunday, at 2:00 A.M. Daylight Saving time ends in the European Union on the Last Sunday of October. For instance, in Germany you must type 2 because Germanys time zone is 1 hour ahead of GMT (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. SET THE DATE AND TIME MANAULLY You can also use the Copy Your Computers Time Settings to synchronize the Date and Time to your local PC. Or, you also can adjust Year/Month/Day/Hour/Minute/Second manually. Please click the Apply button to save the configuration. STEP 4: CONNECT TO INTERNET Push the APPLY APPLY button to use the configuration. APPLY APPLY D-Link DSL-2740B User Manual 27 Section 3 - Configuration INTERNET SETUP To access the INTERNET SETUP (WAN) settings window, click on the INTERNET Setup button in the SETUP directory and select the Manual Setup to configure the MANUAL ADSL interface in this page:
INTERNET SETUP If you want to type connection configuration for various types, please enable the Manual Setup. MANUAL ADSL CONNECTION SETUP PPPoE/PPPoA PPPoE/PPPoA PPPoE/PPPoA PPPoE/PPPoA Choose this option if your ISP uses PPPoE/PPPoA.(For most DSL users DynaDynaDynaDynamic IP Address mic IP Address mic IP Address mic IP Address Choose this option if your ISP uses Dynamic IP Address over DSL. Static IP Address Static IP Address Static IP Address Static IP Address Choose this option if your ISP uses Static IP assignments. Bridge Bridge Bridge Bridge Choose this option if your ISP uses Bridge. D-Link DSL-2740B User Manual 28 Section 3 - Configuration For PPPoE/PPPoA connection Type in the Username and Password (and PPPoE Service Name, if required by your ISP). Type service name which is from your ISP on the Servername Servername option. Servername Servername Choose PPPoE LLC/Snap-Bridging, PPPoE VC-mux, PPPoA LLC/encapsulation and PPPoA VC-mux. Set MTU value which you want but should be less than 1492 on the MTU Set the time which your data doesnt pass through the connection, it will be disconnected on the Idle Time Out. The default time is 0 and it means it is always on. PPP IP Extension:
Router passes the obtained IP address to the local PC and acts as a bridge only modem. Click on the Next button to go to the next window. D-Link DSL-2740B User Manual 29 Section 3 - Configuration DNS AND DEFAULT GATEWAY Select Obtain DNS server address automatically to get DNS from your ISP. Or Select Use the following DNS server addresses to type the DNS IPs in the Preferred DNS server and Alternate DNS server. Set PVC values which are from your ISP on VPI/VCI Enable the Enable NAT when you want to have WAN and LAN. Enable the Enable Firewall when you want to have the basic filter function, for example, ICMP ping to DSL-2740B. Enable the Enable IGMP Proxy when you want to let IAD to play as a IGMP proxy which can help proxy server to send IGMP query packets to the IPTV clients. Enable VLAN and type the VLAN ID (0-4095) which your ISP assigns. Click on the Apply button. D-Link DSL-2740B User Manual 30 Section 3 - Configuration WIRELESS Use this section to configure the wireless settings for your D-Link router. Please note that changes made in this section will also need to be duplicated onto your wireless clients and PC. To access the WIRELESS (WLAN) settings window, click on the Wireless Setup button in the SETUP directory. Wireless Network Setting Click on the Wireless Connection Setup Wizard button to setup the wireless connection in an easy way. It will use Web-based Wizard to assist you in connecting to your new D-Link Systems Wireless Router. Note:Before launching the wizard,please make sure you have followed all steps outlined in the Quick Installation Guide included in the package. Click on the Add Wireless Device with WPS button. This wizard is designed to assist you in connecting your wireless device to your router with WPS. It will guide you through step-by-step instructions on how to get your wireless device connected. If you would like to configure the Internet settings of you new D-Link Router manually,then click on the Manual Wireless Connection Setup button. D-Link DSL-2740B User Manual 31 Section 3 - Configuration Welcome to the D-Link Wireless Security Setup Wizard Enable Your Wireless Network Enable Your Wireless Network Your wireless network is enabled by Enable Your Wireless Network Enable Your Wireless Network default. You can simply uncheck the below checkbox to disable wireless Network Name (SSID) identifies members of the Service Set. Accept the default name or change it to something else. If the default SSID is changed, all other devices on the wireless network must also use the same SSID. In order to protect your network from hackers and unauthorized users, we adapt Auto (WPA or WPA2 for your wireless security mode. We provide user a random pre-shared key by automatically. You can also set it manually if you do not prefer the key we generate. Type a string (8-63 characters, such as a~z, A~Z, or 0~9.) on the PrePrePrePre----Shared Shared key. Shared Shared Click Prev to go back to previous page. Click Next button to go to the next page. Click Cancel button to return to the main menu of Wireless Setup page. D-Link DSL-2740B User Manual 32 Section 3 - Configuration Add Wireless Device with WPS The wizard shows the option to setup WPS by Auto or Manual. Auto -- Select this option if your wireless device supports WPS(Wi-Fi Protected Setup) Manual -- Select this option to display the current wireless settings for you to configure the wireless device manually. Click Next button to go to the next page. Click Cancel button to return to the main menu of Wireless Setup page. Add Wireless Device with WPS (Automatically) This page allows you to select PIN or PBC to use WPS method. PIN- Enter the PIN code from your wireless device and click the below Connect button to start the handshaking. PBC- Please press the Connect button and hold on for 3 seconds on your wireless device and presses the Connect button below within 120 seconds to start the handshaking. Click Prev to go back to previous page. D-Link DSL-2740B User Manual 33 Section 3 - Configuration Add Wireless Device with WPS (WI-FI PROTECTED SETUP) WIZARD This page will count down the timer and please start WPS on the wireless device you are adding in time. Add Wireless Device with WPS (Manually) This screen shows the information for the SSID, Wireless Security Mode and the Network key and allow you to modify the current setting, if you select Auto in the previous page, you wont see this page and please refer to next column. Please type network name on the Network Name SSID. Please type network key on the Network Key Click OK button to process the next page. Add Wireless Device with WPS (WI-FI PROTECTED SETUP) Finally it will show all the configurations. You can check if it is exact, please click the Next button. D-Link DSL-2740B User Manual 34 Section 3 - Configuration Manual WIRELESS Connection Setup SETTINGS Click on the Enable Wireless box to allow the router to operate in the wireless environment. You can use the Add New button to set the schedule. The SSID identifies members of the Service Set. Accept the default name or change it to something else. If the default SSID is changed, all other devices on the wireless network must also use the same SSID. Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on. The Wireless Channel can let you select the channel of your access point. Channel availability is different for different countries due to their regulation. Select 802.11 Mode to operate in b/g/n mode. Or select specified mode to use. 802.11b only, 802.11g only, 802.11n only. Mixed 802.11g and 802.11b which means DSL-2740B will detect the clients to use 802.11g or 802.11b to synchronize. Mixed 802.11n, 802.11g and 802.11b which means DSL-2740B will detect the clients to use 802.11n, 802.11g or 802.11b to synchronize. Channel Width, Choose 20MHz or Auto 20/40MHz to decide the Transmission Rate. Transmission Rate, suggest keeping the Best (automatic) selection. This is related to Receive Sensitivity as follows, MCS 0 D-Link DSL-2740B User Manual MANRATE HT20/GI=0 HT40/GI=0 HT40/GI=1 0x80 13.5Mbps 6.5Mbps X 35 Section 3 - Configuration MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 12 MCS 13 MCS 14 MCS 15 0x81 0x82 0x83 0x84 0x85 0X86 0x87 0x88 0x89 0x8a 0x8b 0x8c 0x8d 0x8e 0x8f 13Mbps 19.5Mbps 26Mbps 39Mbps 52Mbps 58.5Mbps 65Mbps 13Mbps 26Mbps 39Mbps 52Mbps 78Mbps 104Mbps 117Mbps 130Mbps 27Mbps 40.5Mbps 54Mbps 81Mbps 108Mbps 121.5Mbps 135Mbps 27Mbps 54Mbps 81Mbps 108Mbps 162Mbps 216Mbps 243Mbps 270Mbps X X X X X X 150Mbps X X X X X X X 300Mbps If you only use the Transmission rate of the 20MHz, please refer to the right picture. D-Link DSL-2740B User Manual 36 Section 3 - Configuration If you want to use the max. rate 150Mbps or the max. rate 300Mbps on 40MHz, please choose the Channel Width: Auto 20/40MHz Choose Visible or Invisible to decide if you want to show its SSID. D-Link DSL-2740B User Manual 37 Section 3 - Configuration WIRELESS SECURITY Mode To protect your privacy you can configure wireless security features. This device supports three wireless security modes including: WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option requires an external RADIUS server. D-Link DSL-2740B User Manual 38 Section 3 - Configuration WIRELESS SECURITY MODE - WEP WEP (Wireless Encryption Protocol) encryption can be enabled for security and privacy. WEP encrypts the data portion of each frame transmitted from the wireless adapter using one of the predefined keys. The router offers 64 or 128 bit encryption with four keys available. Select WEP Key Length from the drop-down menu. (128 bit is stronger than 64 bit) Specify the encryption key from the Current Network Key drop-down menu. Enter the key into the WEP Key field 1~4. (Key length is outlined at the bottom of the window.) Select Authentication type from the drop-down menu. (Shared is better than Open) Click on the Apply Settings button to apply settings. D-Link DSL-2740B User Manual 39 Section 3 - Configuration WIRELESS SECURITY MODE WPA-Personal Use WPA WPA WPA WPA or WPA2 WPA2 mode to achieve a balance of strong security and WPA2 WPA2 best compatibility. This mode uses WPA for legacy clients while maintaining higher security with stations that are WPA2 capable. Also the strongest cipher that the client supports will be used. For best security, use WPA2 Only WPA2 Only mode. This mode uses AES (CCMP cipher WPA2 Only WPA2 Only and legacy stations are not allowed access with WPA security. For maximum compatibility, use WPA Only WPA Only. This mode uses TKIP cipher. WPA Only WPA Only Some gaming and legacy devices work only in this mode. According to the WiFi Alliance 11N specification, Wi-Fi Protected Setup is not full supported under WPA Only mode. We will disable your Wi-Fi Protected Setup if you use WPA Only mode. Choose Auto(WPA or WPA2 WPA2 only / WPA only Auto(WPA or WPA2 / WPA2 only WPA only on the WPA WPA WPA WPA WPA only WPA2 only Auto(WPA or WPA2 Auto(WPA or WPA2 WPA2 only WPA only ModeModeModeMode Type the value seconds on the Group Key Update Interval Group Key Update Interval. The default Group Key Update Interval Group Key Update Interval value is 1800. Type the string on the PrePrePrePre----Shared Key Shared Key Shared Key Shared Key Click the Apply Settings button to save the configuration. D-Link DSL-2740B User Manual 40 Section 3 - Configuration WIRELESS SECURITY MODE WPA-Enterprise 802.1x Some network-security experts now recommend that wireless networks use 802.1X security measures to overcome some weaknesses in standard WEP applications. A RADIUS server is used to authenticate all potential users. Enter your RADIUS server data: IP Address, Port, and Key. Click on the Save Settings button to apply settings. D-Link DSL-2740B User Manual 41 Section 3 - Configuration LOCAL NETWORK You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will change automatically if you change the IP address of the Router. To access the Local Network setting window, click on the Local Network button in the SETUP directory. ROUTER SETTINGS To change the Router IP Address or Subnet Mask, type in the desired values. DHCP SERVER SETTINGS (OPTIONAL) The Enable DHCP Server is selected by default for the Routers Ethernet LAN interface. Set the DHCP IP Address Range and the default is from 192.168.1.2 to 192.168.1.254. The IP address pool can be up to 253 IP addresses. Set the value hours on the DHCP Lease Time If you dont want DSL-2740B to be the DHCP server, you can enable DHCP relay to pass the DHCP discover packets of the clients to another DHCP server. Please set the DHCP server IP address on the DHCP Server IP Address. D-Link DSL-2740B User Manual 42 Section 3 - Configuration ADD/EDIT DHCP RESERVATION (OPTIONAL) Select the Enable to let you reserve the IP Address for the designated PC with the configured MAC Address. The Computer Name can help you recognize the PC with the MAC Address, such as Fathers Laptop. Clicking on the Copy Your PCs MAC Address button to help you get the Mac address from the PC you are using now browsing this web page. Click on the Save button to save the settings DHCP RESERVATIONS LIST After saved the DHCP reservation, the DHCP RESERVATIONS LIST will list the configuration. The NUMBER OF DYNAMIC DHCP CLIENTS shows how many DHCP clients (PC or Laptop) connected to the router currently. Click on the Save Settings button. You will be asked to reboot by a pop-up window. Click on the OK to reboot the router. D-Link DSL-2740B User Manual 43 Section 3 - Configuration LAN SETUP Do not turn the Router off while it is rebooting. You might need to re-configure your PC NIC settings to enter the Routers web manager after reboot. D-Link DSL-2740B User Manual 44 Section 3 - Configuration TIME The TIME configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically adjust the time when needed. To access the TIME setting window, click on the Time and Date button in the SETUP directory TIME Check the Enable NTP Server. Select specific time server to use from the NTP Server Used drop-down menu. Or, you can type the specific NTP server name. Select your operating time zone from the Time Zone drop-down menu. If you need to use the daylight saving, just choose the Enable Daylight Saving. Daylight saving is a period from late Spring to early Fall. Set how many hours to change the time for Daylight saving Offset. Configure Daylight Saving Dates, Daylight Saving time starts in the most parts of the United States on the second Sunday of March. Each time zone in the United States starts Daylight Saving time at 2 A.M. Thus, in the United States you must use March, Second, Sunday, at 2:00 A.M. Daylight Saving time starts in the European Union on the last Sunday of March. Thus, in European Union, you must select March, Last, Sunday. The time must depend on your countrys time zone. For D-Link DSL-2740B User Manual 45 Section 3 - Configuration example, In Germany you must type 2 because Germanys time zone is 1 hour ahead of GMT or UTC (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. Daylight Saving time ends in the most parts of the United States on the First Sunday of November. Each time zone in the United States must use Daylight Saving time at 2:00 A.M. Thus, in the United States you must set November, First, Sunday, at 2:00 A.M. Daylight Saving time ends in the European Union on the Last Sunday of October. For instance, in Germany you must type 2 because Germanys time zone is 1 hour ahead of GMT (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. SET THE DATE AND TIME MANAULLY You can also use the Copy Your Computers Time Settings to synchronize the Date and Time to your local PC. Or, you also can adjust Year/Month/Day/Hour/Minute/Second manually. Please click the Apply button to save the configuration. D-Link DSL-2740B User Manual 46 Section 3 - Configuration PARENTAL CONTROL Parental Control provides two useful tools for restricting Internet access. Block Websites allows you to quickly create a list of all web sites that you wish to stop users from accessing. Time Restrictions allows you to control when clients or PCs connected to Router are allowed to access the Internet BLOCKED WEBSITES SCH BLOCKED WEBSITES SCHEDULING EDULING BLOCKED WEBSITES SCH BLOCKED WEBSITES SCH EDULING EDULING Please type the website name which you want to block on the Website Website Website Website Please set the day and time. After finish, please click on the Block Block Block Block Website Website button and then it will show in list. Website Website INTERNET ACCESS TIME RESTRICTIONS INTERNET ACCESS TIME RESTRICTIONS INTERNET ACCESS TIME INTERNET ACCESS TIME RESTRICTIONS RESTRICTIONS You can have the schedule plan to decide the internet access time restrictions. D-Link DSL-2740B User Manual 47 Section 3 - Configuration LOGOUT The LOGOUT page enables you to logout of your router configuration and closes the browser. To access the LOGOUT setting window, click on the Logout button in the SETUP directory LOGOUT Click on the Logout button to logout of the router configuration settings and close the browser. D-Link DSL-2740B User Manual 48 Section 3 - Configuration This chapter includes the more advanced features used for network management and security as well as administrative tools to manage the router, view status and other information used to examine performance and for troubleshooting. ADVANCED PORT FORWARDING Use the PORT FORWARDING window to open ports in your router and re-direct data through those ports to a single PC on your network
(WAN-to-LAN traffic). The Port Forwarding function allows remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-2740B will accept remote requests for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to the server on your LAN with the LAN IP address you specify. Remember that the specified Private IP Address must be within the useable range of the subnet occupied by the Router. To access the PORT FORWARDING settings window, click on the PORT FORWARDING button in the ADVANCED directory PORT FORWARDING RULES CONFIGURATION Select a name from the Application Name drop-down menu for a pre-configured application or type a name in the Name input box to define your own application. Select a name from the Computer Name drop-down menu or type an IP address in the IP address input box to appoint the PC to receive the forwarded packets. The External Port shows the ports opened for remote users in the WAN side of the router. The TCP/UDP means the protocol type of the opened ports. The Internal Port shows the ports opened in the PC with the appointed IP Address. The TCP/UDP means the protocol type of the opened ports. D-Link DSL-2740B User Manual 49 Section 3 - Configuration APPLICATION RULES This option is used to pre-configure single or multiple trigger ports on your router that will automatically activate when the router senses data sent to the Internet from one of these applications. APPLICATION RULES CONFIGURATION APPLICATION RULES CO NFIGURATION APPLICATION RULES CO APPLICATION RULES CO NFIGURATION NFIGURATION Select a name from the Application Name drop-down menu for a pre-configured application or type a name in the Name input box to define your own application. It will appear the Trigger and Firewall ports after you choose the application name by the drop-down menu. Choose the Use Interface and click the Add/Apply Add/Apply button to save Add/Apply Add/Apply the configuration, and then it will be added in the list. D-Link DSL-2740B User Manual 50 Section 3 - Configuration QOS SETUP Quality of Service Setup can be used to improve data flow for different applications by prioritizing the network traffic based on selected criteria. QOS SETUP QOS SETUP QOS SETUP QOS SETUP You have to define the service ports. For example, VoIP(RTP) is from 700(Start Port) to 900(End Port) H.323 H.323 is 1720 H.323 H.323 FTP FTP is from 20(Start Port) to 21(End Port) FTP FTP MSN massager is from 1863(Start Port) to 1864(End Port) WIRELESS QOS SETUP WIRELESS QOS SETUP WIRELESS QOS SETUP WIRELESS QOS SETUP Enable or Disable You can choose Enable Disable to decide if the data has the Disable Enable Enable Disable WMM on the WMM(Wi WMM(Wi----Fi Multimedia Fi Multimedia WMM(Wi WMM(Wi Fi Multimedia Fi Multimedia WMWMWMWMM No Acknowledge M No Acknowledge means that the receiver doesnt have to M No Acknowledge M No Acknowledge send back the Acknowledge packet. D-Link DSL-2740B User Manual 51 Section 3 - Configuration ADVANCED QOS SETUP ADVANCED QOS SETUP ADVANCED QOS SETUP ADVANCED QOS SETUP Click the Wireless QoS Wireless QoS button to set wireless data priority. Wireless QoS Wireless QoS Click the LAN QoS button to set Ethernet data priority. S CONFIGURATI WIRELESS QOS RULE WIRELESS QOS RULES CONFI GURATIONONONON GURATI S CONFI WIRELESS QOS RULE WIRELESS QOS RULE S CONFI GURATI Type the policy name on the NameNameNameName Set the priority value on the Priority Priority Priority Priority Select the Protocol Protocol, ANY, ICMP, TCP and UDP. Protocol Protocol Set the Source IP Range Source IP Range and the Destination IP Range Destination IP Range. Source IP Range Destination IP Range Source IP Range Destination IP Range Source Port Range and the Destination Port Range Set the Source Port Range Destination Port Range. Source Port Range Source Port Range Destination Port Range Destination Port Range Click the Add/Apply Add/Apply button to add the policy to the list. Add/Apply Add/Apply D-Link DSL-2740B User Manual 52 Section 3 - Configuration QOS RULES CONFIGURATI LANLANLANLAN QOS RULES CONFI GURATIONONONON GURATI QOS RULES CONFI QOS RULES CONFI GURATI Type the policy name on the NameNameNameName Set the priority value on the Priority Priority Priority Priority Select the Protocol Protocol, ANY, ICMP, TCP and UDP. Protocol Protocol Set the Source IP Range Source IP Range and the Destination IP Ra Destination IP Rangengengenge. Source IP Range Destination IP Ra Source IP Range Destination IP Ra Source Port Range and the Destination Port Range Set the Source Port Range Destination Port Range. Source Port Range Source Port Range Destination Port Range Destination Port Range Click the Add/Apply Add/Apply button to add the policy to the list. Add/Apply Add/Apply D-Link DSL-2740B User Manual 53 Section 3 - Configuration OUTBOUND FILTER By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. AAAADD OUTBOUND IP FILTER DD OUTBOUND IP FILTER DD OUTBOUND IP FILTER DD OUTBOUND IP FILTER Type the filter name on the Filter Name Filter Name. Filter Name Filter Name Choose ICMP, TCP/UDP, TCP or UDP on the Protocol Protocol. Protocol Protocol Source IP address, Source Subnet Mask Type Source IP address Source Subnet Mask Source IP address Source IP address Source Subnet Mask Source Subnet Mask and Source Port
(port or port:
Source Port(port or port:::::portportportport means from port:
(port or Source Port
(port or Source Port port:
which port to which port Destination Subnet Type Destination IP address, Destination Destination IP address Subnet Destination IP address Destination Destination IP address Destination Subnet Subnet Mask Mask Mask Mask and Destination rt or port:
Port(port or Destination Port(po port:::::portportportport rt or Port(po Destination port:
port:
Destination Port(po rt or means from which port to which port Set the policy schedule on the Schedule, Always or never, or View Available Schedules View Available Schedules View Available Schedules View Available Schedules Please click Add/Apply Add/Apply button to add the policy in Add/Apply Add/Apply the list. D-Link DSL-2740B User Manual 54 Section 3 - Configuration NBOUND FILTER IIIINBOUND FILTER NBOUND NBOUND FILTER FILTER By default, all incoming IP traffic from the internet network is allowed. The Inbound Filter allows you to create a filter rule to filter incoming IP traffic by specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. AAAADD OUTBOUND IP FILTER DD OUTBOUND IP FILTER DD OUTBOUND IP FILTER DD OUTBOUND IP FILTER Type the filter name on the Filter Name Filter Name. Filter Name Filter Name Choose ICMP, TCP/UDP, TCP or UDP on the Protocol Protocol. Protocol Protocol Type Source IP address Source Subnet Mask and Source Port(port Source IP address, Source Subnet Mask Source Port(port or or or or Source Port(port Source Subnet Mask Source IP address Source IP address Source Subnet Mask Source Port(port port:::::portportportport means from which port to which port port:
port:
port:
Destination Subnet Mask Type Destination IP address Destination IP address, Destination Subnet Mask and Subnet Mask Destination IP address IP address Destination Destination Destination Subnet Mask Destination Port(port or port:
Destination Port(port or port:::::portportportport means from which port to which port port:
Port(port or Destination Destination Port(port or port:
Set the policy schedule on the Schedule, Always or never, or View View View View Available Schedules Availab le Schedules Availab Availab le Schedules le Schedules Please click Add/Apply Add/Apply button to add the policy in the list. Add/Apply Add/Apply D-Link DSL-2740B User Manual 55 Section 3 - Configuration WIRELESS FILTER This feature can let you add a policy to deny or allow WLAN devices connected to the router WIRELESS FILTER POLICY WIRELESS FILTER POLICY WIRELESS FILTER POLICY WIRELESS FILTER POLICY You can choose the Disable/ Allow All/ Deny All of Wireless Filter Wireless Filter Wireless Filter Wireless Filter Policy. Policy. Policy. Policy. Disable: You dont want to launch the feature. Allow All: Support Wlan devices make connection, except the mac address which is added in the filter table. Deny All: Support deny all Wlan devices make connection, except the mac address which is added in the filter table. WIRELESS FILTER WIRELESS FILTER WIRELESS FILTER WIRELESS FILTER Type filter name on the FILTER NAME FILTER NAME FILTER NAME FILTER NAME Type wireless mac address on the Wireless MAC Address Wireless MAC Address Wireless MAC Address Wireless MAC Address WIRELESS F MAXIMUM 32 ENTRIES CANCANCANCAN BE ILTER ---- MAXIMUM 32 ENTRIES WIRELESS FILTER BE MAXIMUM 32 ENTRIES ILTER WIRELESS F WIRELESS F ILTER MAXIMUM 32 ENTRIES BE BE ADDED. ADDED. ADDED. ADDED. Please click the Add/Apply button to add the policy in the list. D-Link DSL-2740B User Manual 56 Section 3 - Configuration DNS SETUP The DNS is used to resolve the DNS name to IPs. You can type or get automatically. The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc... using a domain name that you have purchased (for example:
www.whateveryournameis.com with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing IP addresses. Using a DDNS service provider, your friends can enter your host name to connect to your game server and your friends dont mind what your IP address is, and then just type the DDNS name to reach. You can use the D_Link DDNS server, https://www.dlinkddns.com to have a free DDNS. To access the DNS setting window, click on the DNS button under the ADVANCED tab. DNS SERVER CONFIGURATION If you are using the Router for DHCP service on the LAN and are using DNS servers on the ISPs network, check Obtain DNS server address automatically box. If you have DNS IP addresses provided by your ISP, enter these IP addresses in the available entry fields for the Primary DNS Server and the Secondary DNS Server. D-Link DSL-2740B User Manual 57 Section 3 - Configuration To access the DDNS setting window, click on the DDNS button under the ADVANCED tab. DDNS CONFIGURATION Please enable the Enable Dynamic DNS if you want to use DDNS. Choose which DDNS web site to use on the Server Address. Type which Host name which you registered with your DDNS service provider. on the Host Name. Please choose which interface name to use on the Interface. Type the username/password on the username/password for your DDNS account. After configure the DNS settings as desired, click on the Apply button to apply settings. D-Link DSL-2740B User Manual 58 Section 3 - Configuration FIREWALL & DMZ The router already provides a simple firewall by virtue of the way NAT works. By default NAT does not respond to unsolicited incoming requests on any port, thereby making your WAN invisible to Internet cyber attackers. DMZ means 'Demilitarised Zone'. DMZ allows computers behind the router firewall to be accessible to Internet traffic. Typically, your DMZ would contain Web servers, FTP servers, and others. FIREWALL SETTING FIREWALL SETTING FIREWALL FIREWALL SETTING SETTING Enable the SPI on the Enable SPI Enable SPI Enable SPI Enable SPI Enable the DOS and Portscan on the Enable DOS and Portscan Enable DOS and Portscan Enable DOS and Portscan Enable DOS and Portscan Protection Protection Protection Protection Choose the SYN attack Ping attack, Xmas FIN/URG/PSH attack, Ping attack SYN attack, FIN/URG/PSH attack Xmas SYN attack Ping attack FIN/URG/PSH attack SYN attack FIN/URG/PSH attack Ping attack Xmas Xmas Null scanning attack, Ping of eset attack, Null scanning attack TCP reset attack Tree attack Tree attack, TCP r Ping of Null scanning attack eset attack Tree attack Tree attack TCP r TCP r eset attack Null scanning attack Ping of Ping of Death attack and SYN/RST SYN/FIN attack Death attack SYN/RST SYN/FIN attack. SYN/RST SYN/FIN attack Death attack Death attack SYN/RST SYN/FIN attack D-Link DSL-2740B User Manual 59 Section 3 - Configuration DMZ SETTING DMZ SETTING DMZ SETTING DMZ SETTING Please enable the Enable DMZ Enable DMZ and type the DMZ client IP on the Enable DMZ Enable DMZ DMZ IP Address DMZ IP Address. Or you also can choose the DMZ host by the DMZ IP Address DMZ IP Address up-down menu. APPLICATION LEVEL GATEWAY (ALG APPLICATIO N LEVEL GATEWAY (ALG N LEVEL GATEWAY (ALG APPLICATIO APPLICATIO N LEVEL GATEWAY (ALG CONFIGURATION CONFIGURATION CONFIGURATION CONFIGURATION Please choose the PPTPPPTPPPTPPPTP, IPSec(VPN Passthrough IPSec(VPN Passthrough, IPSec(VPN Passthrough IPSec(VPN Passthrough RTSP(Online Video Streaming RTSP(Online Video Streaming, Windows/MSN Messager Windows/MSN Messager, FTPFTPFTPFTP, Windows/MSN Messager RTSP(Online Video Streaming RTSP(Online Video Streaming Windows/MSN Messager H.323(Video Conferencing H.323(Video Conferencing, SIPSIPSIPSIP, WakeWakeWakeWake----OnOnOnOn----LANLANLANLAN and MMSMMSMMSMMS. H.323(Video Conferencing H.323(Video Conferencing D-Link DSL-2740B User Manual 60 Section 3 - Configuration ADVANCED INTERNET The Multiple PVC Settings allow you to AddAddAddAdd, Delete Delete or EditEditEditEdit multiple PVCs connection for advanced ADSL service. The Advanced ADSL settings Delete Delete allow you to choose which ADSL modulation settings your modem router will support. D-Link do not recommend that you change these settings unless directed to do so by your ISP. MULTIPLE PVC SETTING MULTIPLE PVC SETTINGSSSS MULTIPLE PVC SETTING MULTIPLE PVC SETTING Please click the AddAddAddAdd button to add the multiple PVC D-Link DSL-2740B User Manual 61 Section 3 - Configuration ADVANCED ADSL SETTIN ADVANCED ADSL SETTINGSGSGSGS ADVANCED ADSL SETTIN ADVANCED ADSL SETTIN Please select following ADSL profile to link. ADSL2+, Annex M AnnexL, ADSL2+
ADSL2, AnnexL T1.413, ADSL2 G.Dmt, G.liteG.liteG.liteG.lite, T1.413 G.Dmt Annex M ADSL2+
AnnexL ADSL2 T1.413 G.Dmt G.Dmt T1.413 ADSL2 AnnexL ADSL2+
Annex M Annex M Please choose the Inner pair Outer pair on the Select the Inner pair or Outer pair Select the Outer pair Inner pair Inner pair Outer pair Select the Select the phone line pair below phone line pair below. phone line pair below phone line pair below Please select to enable Bitswap and SRA on the Capability. D-Link DSL-2740B User Manual 62 Section 3 - Configuration ADVANCED WIRELESS These options are for users that wish to change the behavior of their 802.11g wireless radio from the standard setting. D-Link does not recommend changing these settings from the factory default. Incorrect settings may impair the performance of your wireless radio. The default settings should provide the best wireless radio performance in most environments. WIRELESS SETTINGS ADVANCED WIRELESS ADVANCED SETTINGS WIRELESS ADVANCED ADVANCED WIRELESS SETTINGS SETTINGS If you need to change the default behavior, Please type the value on the Fragmentation Threshold Fragmentation Threshold Fragmentation Threshold Fragmentation Threshold Please type the value on the RTS Threshold RTS Threshold RTS Threshold RTS Threshold Please type the value on the DTIM Interval DTIM Interval DTIM Interval DTIM Interval Please type the value on the Beacom Interv Beacom Intervalalalal Beacom Interv Beacom Interv Please choose 20%, 40%, 60%, 80% and 100% on the Transmit Transmit Transmit Transmit Power Power. Power Power GUEST WIRELESS SETTING GUEST WIRELESS SETTING GUEST WIRELESS SETTING GUEST WIRELESS SETTING D-Link DSL-2740B User Manual 63 Section 3 - Configuration Please enable the Enable Wireless Guest Network Enable Wireless Guest Network Enable Wireless Guest Network Enable Wireless Guest Network Type SSID on the Wireless Network Name Wireless Network Name Wireless Network Name Wireless Network Name Invisible on the Visibility Status Visible or Invisible Please choose Visible Visibility Status Invisible Visible Visible Invisible Visibility Status Visibility Status Please select OOOOff/On ff/On on the AP Isolation. ff/On ff/On D-Link DSL-2740B User Manual 64 Section 3 - Configuration ADVANCED LAN These options are for users that wish to change the LAN settings. D-Link does not recommend changing these settings from factory default. Changing these settings may affect the behavior of your network. UPNP UPNP UPNP UPNP Please select the Enable UPnP when you want to have Universal Plug and Play (UPnP supports peer-to-peer Plug and Play functionality for network devices. BLOCK ICMP PING BLOCK ICMP PING BLOCK ICMP PING BLOCK ICMP PING Enable the WAN Ping Respond on the Enable WAN Ping Enable WAN Ping Enable WAN Ping Enable WAN Ping Respond Respond.... Respond Respond Deny All on the WAN Ping Inbound Allow All or Deny All Please select Allow All WAN Ping Inbound Deny All Allow All Allow All Deny All WAN Ping Inbound WAN Ping Inbound Filter Filter and you can also type a string on the Details Details to describe the Details Filter Filter Details action. MULTICAST STREAMS MULTICAST STREAMS MULTICAST STREAMS MULTICAST STREAMS Please enable the Enable Multicast Streams (IGMP Enable Multicast Streams (IGMP to let IGMP Enable Multicast Streams (IGMP Enable Multicast Streams (IGMP stream can pass through DSL-2740B. D-Link DSL-2740B User Manual 65 Section 3 - Configuration SNMP SETUP Simple Network Management Protocol (SNMP allows a management application to retrieve statistics and status from the SNMP agent in this device. Select the desired values and click "Apply" to configure the SNMP options. SNMP CONFIGURATION SNMP CONFIGURATION SNMP CONFIGURATION SNMP CONFIGURATION Please enable the SNMP Agen SNMP Agentttt SNMP Agen SNMP Agen Read Community, Set Community Please type the Read Community Set Community to match to Set Community Read Community Read Community Set Community the SNMP requirier. System Name, System Location Please type System Name System Location and System System System Name System Name System Location System Location System System Contact Contact to describe the DSL-2740Bs related information. Contact Contact Please type the trap IP on the Trap Manager IP Trap Manager IP Trap Manager IP Trap Manager IP Please click the Apply Apply button to save the configurations. ApplyApply D-Link DSL-2740B User Manual 66 Section 3 - Configuration REMOTE MANAGEMENT This section allows you to enable/disable remote access to the router from the Internet. Advanced access control allows you to configure access via specific services. Most users will not need to change any of these settings. REMOTE MANAGEMENT SETTINGS REMOTE MANAGEMENT SE TTINGS REMOTE MANAGEMENT SE REMOTE MANAGEMENT SE TTINGS TTINGS Please enable the ENABLE Remote Management ENABLE Remote Management ENABLE Remote Management ENABLE Remote Management Please type the port number which you want to replace the original port. Please select Allow All Deny All on the Remote Admin Allow All or Deny All Remote Admin Deny All Allow All Allow All Deny All Remote Admin Remote Admin Inbound Filt Inbound Filterererer Inbound Filt Inbound Filt Please type a string to describe the action on the Details Details. Details Details D-Link DSL-2740B User Manual 67 Section 3 - Configuration REMOTE ACCESS CONTRO REMOTE ACCESS CONTROLLLL REMOTE ACCESS CONTRO REMOTE ACCESS CONTRO Please select the Service Service to enable on LANLANLANLAN or WANWANWANWAN. Service Service Apply Settings button to save the configuration. Please click the Apply Settings Apply Settings Apply Settings D-Link DSL-2740B User Manual 68 Section 3 - Configuration ROUTING SETUP Enter the destination network address, subnet mask, gateway AND/OR available WAN interface then click "Apply" to add the entry to the routing table. A maximum 32 entries can be configured A maximum 32 entries can be configured Allows you to configure RIP (Routing Information Protocol. To activate RIP for the device, select the A maximum 32 entries can be configured A maximum 32 entries can be configured
'Enabled' radio button for Global RIP Mode. To configure an individual interface, select the desired RIP version and operation, followed by placing a check in the 'Enabled' checkbox for the interface. Click the 'Apply' button to save the configuration, and to start or stop RIP based on the Global RIP mode selected. ROUTING -------- STATIC ROUTE ROUTING STATIC ROUTE STATIC ROUTE ROUTING ROUTING STATIC ROUTE Please click the AddAddAddAdd or EditEditEditEdit button to set a static routing policy in the list. Destination Network Address and Subnet Please type the Destination Network Address Subnet Destination Network Address Destination Network Address Subnet Subnet MaskMaskMaskMask.... Gateway IP or the interface Please select to type the Gateway IP interface to be interface Gateway IP Gateway IP interface the routing interface. Click the Apply the button to save the configuration. ROUTING -------- RIP CONFIGURATION ROUTING RIP CONFIGURATION ROUTING ROUTING RIP CONFIGURATION RIP CONFIGURATION Please choose the Version Version and Operation Operation, and then decide to Operation Version Version Operation Enable Enable or not. Enable Enable D-Link DSL-2740B User Manual 69 Section 3 - Configuration TR-069 The WAN management protocol TR-069 allows anAuto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device. To access the TR-069 Configuration window, click on the TR-069 button under the ADVANCED tab. TR-069 TR-069 is a WAN management protocol which allows your ISP to perform monitoring, configuration and firmware upgrade on your router remotely. Inform: Select to enable or disable TR-069 client Inform Interval:
functionality. Interval (seconds) between two Inform messages. ACS URL: Enter the URL of your ISPs ACS Enter the authentication user name Enter the authentication password Enter the authentication user name for the ACS to login Enter the authentication password for the ACS to login ACS User Name:
ACS Password:
Connection Request User Name:
Connection Request Password:
D-Link DSL-2740B User Manual 70 Section 3 - Configuration WIFI PROTECTED SETUP Wi-Fi Protected Setup is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected Setup in order to be configured by this method. WIWIWIWI----FI PROTECTED SETU FI PROTECTED SETUPPPP FI PROTECTED SETU FI PROTECTED SETU Enable or Lock Wireless Security Settings Please select to Enable Lock Wireless Security Settings Lock Wireless Security Settings Enable Enable Lock Wireless Security Settings You also can click the Set to Configured Set to Configured button to set configured Set to Configured Set to Configured PIN SETTINGS PIN SETTINGS PIN SETTINGS PIN SETTINGS Choose to click the Reset PIN to Default button or Generate New Reset PIN to Default Generate New PIN to Default Reset Reset PIN to Default Generate New Generate New PIN PIN PIN PIN button to show the PIN on the Current PIN Current PIN. Current PIN Current PIN ADD WIRELESS STATION ADD WIRELESS STATION ADD WIRELESS STATION ADD WIRELESS STATION Please click the Add Wireless Device Add Wireless Device with WPS button to set the Add Wireless Device Add Wireless Device WPS. D-Link DSL-2740B User Manual 71 Section 3 - Configuration POWER MANAGEMENT This feature allows you to control of Hardware modules to evaluate power consumption. Use the control buttons to select the desired option, click Apply and check the status response. MIPS CPU CLOCK MIPS CPU CLOCK MIPS CPU CLOCK MIPS CPU CLOCK 1/8 of full speed ASYNC, 1/4 of full speed You can choose AutoAutoAutoAuto, 1/8 of full speed ASYNC 1/4 of full speed 1/8 of full speed ASYNC 1/8 of full speed ASYNC 1/4 of full speed 1/4 of full speed 1/2 of full speed ASYNC,,,, Full speed ASYN ASYNC, 1/2 of full speed ASYNC ASYNC Full speed ASYNCCCC, Full Full Full Full 1/2 of full speed ASYNC ASYNC ASYNC 1/2 of full speed ASYNC Full speed ASYN Full speed ASYN speed SYNC speed SYNC and it will show on the Status Status. It can control the Status speed SYNC speed SYNC Status CPUs handling data speed. WAIT INSTRUCTION WHEN IDLE WAIT INSTRUCTION WHE N IDLE WAIT INSTRUCTION WHE WAIT INSTRUCTION WHE N IDLE N IDLE The CPU can wait for the coming data to handle or idle. Please EEEEnable nable the feature if necessary. nable nable DRAM SELF REFRESH DRAM SELF REFRESH DRAM SELF REFRESH DRAM SELF REFRESH DRAM can clear any non-processing tasks automatically. Please EEEEnable nable the feature if necessary. nable nable Please click the Apply Apply button to save the settings. ApplyApply D-Link DSL-2740B User Manual 72 Section 3 - Configuration Click on the MAINTENANCE tab to reveal the window buttons for various functions located in this directory. MAINTENANCE PASSWORD The factory default password of this router is 'admin'. To help secure your network, D-Link recommends that you should choose a new password. SET PASSWORD (OPTION SET PASSWORD (OPTIONALALALAL SET PASSWORD (OPTION SET PASSWORD (OPTION Please type the Current Password, New Password, Confirm Password Current Password, New Password, Confirm Password Current Password, New Password, Confirm Password Current Password, New Password, Confirm Password and the Idle Time Out. the Idle Time Out. the Idle Time Out. the Idle Time Out. Please click the Apply Settings button to save the settings. IN AUTHENTICATION (CAPTCHA GRAPHIC LOG----IN AUTHENTICATION (C GRAPHIC LOG APTCHA IN AUTHENTICATION (C GRAPHIC LOG GRAPHIC LOG IN AUTHENTICATION (C APTCHA APTCHA To enhance your router login security, you can enable CAPTCHA. Please click the Apply Settings button to save the configuration. D-Link DSL-2740B User Manual 73 Section 3 - Configuration SAVE/RESTORE SETTINGS Once the router is configured and you can save the configuration settings to a configuration file on your hard drive. You also have the option to load configuration settings, or restore the factory default settings. SAVE/RESTORE CONFIGURATION SAVE/RESTORE CONFIG URATION SAVE/RESTORE CONFIG SAVE/RESTORE CONFIG URATION URATION Please click the SaveSaveSaveSave button on the Save Settings to Local Hard Save Settings to Local Hard Save Settings to Local Hard Save Settings to Local Hard DriveDriveDriveDrive. Please click Browse Browse button to choose the configurations file and Browse Browse then click the Update Settings Update Settings button to upload. Update Settings Update Settings If necessary, please click the Restore Device Restore Device button to have the Restore Device Restore Device default settings. D-Link DSL-2740B User Manual 74 Section 3 - Configuration FIRMWARE UPDATE Use the FIRMWARE UPGRADE window to load the latest firmware for the device. Note that the device configuration settings may return to the factory default settings, so make sure you first save the configuration settings with the SAVE/RESTORE SETTINGS window described above. To access the FIRMWARE UPGRADE setting window, click on the Firmware Update button under the MAINTENANCE tab. FIRMWARE INFORMATION It shows Board ID, Software Version, Bootloader(CEF) Version and Wireless Driver Version FIRMWARE UPGRADE To upgrade firmware, click on the Browse button to search for the firmware file and then click the Upload button to begin copying the file. The Router will load the file and restart automatically. D-Link DSL-2740B User Manual 75 Section 3 - Configuration DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS DIAGNOSTICS Your router is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click "Return Diagnostics Tests" at the bottom of this page to make sure fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures. SYSTEM CHECK SYSTEM CHECK SYSTEM CHECK SYSTEM CHECK Test your eth0/eth1/eth2/eth3 Connection, Test your There are Test your eth0/eth1/eth2/eth3 Connection Test your Test your eth0/eth1/eth2/eth3 Connection Test your eth0/eth1/eth2/eth3 Connection Test your Test your Wireless Connection Wireless Connection and Test ADSL Synchronization Test ADSL Synchronization and they Wireless Connection Wireless Connection Test ADSL Synchronization Test ADSL Synchronization will show PASS PASS or FAILFAILFAILFAIL PASSPASS INTERNET CONNECTIVITYYYY CHECK INTERNET CONNECTIVIT CHECK INTERNET CONNECTIVIT INTERNET CONNECTIVIT CHECK CHECK There are Ping ISP Default Gateway/ Primary DNS server Ping ISP Default Gateway/ Primary DNS server and Ping ISP Default Gateway/ Primary DNS server Ping ISP Default Gateway/ Primary DNS server they will show PASS PASS or FAILFAILFAILFAIL PASSPASS Please click the TestTestTestTest button to Diagnostic the above test items. D-Link DSL-2740B User Manual 76 Section 3 - Configuration SYSTEM LOG The system Log allows you to configure local, remote and email logging, and to view the logs that have been created. REMOTE LOG SETTING REMOTE LOG SETTING REMOTE LOG SETTING REMOTE LOG SETTING Log Level: All events above or equal to the selected level will be logged. All logged events above or equal to the selected level will be displayed. Display Level:
Mode: Display mode of system log. Local: Display on local host only Remote: Send log file to remote system log server only IP address of the remote system log server UDP port number of the remote system log server Server IP Address:
Server UDP Port:
ENABLE EMAIL NOTIFICATION Please enable. If any logs occur, the system will send mail to the mail address you set. D-Link DSL-2740B User Manual 77 Section 3 - Configuration EMAIL SETTINGS EMAIL SETTINGS EMAIL SETTINGS EMAIL SETTINGS From MAIL Address,,,, To MAIL Address Please type the From MAIL Address To MAIL Address and To MAIL Address From MAIL Address From MAIL Address To MAIL Address SMTP Server Address SMTP Server Address.... SMTP Server Address SMTP Server Address Enable Authentication and then set the Please Enable the Enable Authentication Enable Authentication Enable Authentication Account Name Account Password and Verity Password Account Name, Account Password Verity Password. Account Password Account Name Account Name Account Password Verity Password Verity Password EMAIL LOG WHEN FULL EMAIL LOG WHEN FULL EMAIL LOG WHEN FULL EMAIL LOG WHEN FULL Please Enable the On Log Full. When the log file is full, the system will send mail to the mail address you set. VIEW SYSTEM LOG VIEW SYSTEM LOG VIEW SYSTEM LOG VIEW SYSTEM LOG The system will show logs in the list by Date/Time Date/Time, Facility Facility, Date/Time Date/Time Facility Facility verity and Message SeSeSeSeverity Message. Message verity verity Message Please click the Apply Settings Apply Settings button to save the Apply Settings Apply Settings configuration. D-Link DSL-2740B User Manual 78 Section 3 - Configuration SCHEDULE Schedule allows you to create scheduling rules to be applied for your firewall. Maximum of 16 entries SCHEDULE RULE SCHEDULE RULE SCHEDULE RULE SCHEDULE RULE Please click the AddAddAddAdd or EditEditEditEdit button to configure the schedule policy. ADD SCHEDULE RULE ADD SCHEDULE RULE ADD SCHEDULE RULE ADD SCHEDULE RULE Please type the NameNameNameName Please choose all week all week or SunSunSunSun, MonMonMonMon, TueTueTueTue, WedWedWedWed, ThuThuThuThu, FriFriFriFri or all week all week SatSatSatSat. Please set the Start Time Start Time and End Time End Time. Start Time Start Time End Time End Time Please type the Apply Apply button to save the configuration. ApplyApply D-Link DSL-2740B User Manual 79 Section 3 - Configuration STATUS DEVICE INFO Click on the STATUS tab to reveal the window buttons for various functions located in this directory. The DEVICE STATUS window is the first item in the STATUS directory. Use these windows to view system information and monitor performance. The Device Info page displays a summary overview of your router status, including: Device software version and summary of your Internet configuration (both wireless and Ethernet status). To access the DEVICE STATUS LOG setting window, click on the Device Info button in the STATUS directory. GENERAL This window displays current system time, the firmware version and the Released Date. D-Link DSL-2740B User Manual 80 Section 3 - Configuration INTERNET INFO This window displays WAN information including IP address, Mask, Default Gateway, Primary/Secondary DNS Server. WIRELESS LAN This window displays authenticated wireless stations and their status. D-Link DSL-2740B User Manual 81 Section 3 - Configuration LOCAL NETWORK INFO This window displays LAN information including MAC, IP address, Mask, and DHCP Server. D-Link DSL-2740B User Manual 82 Section 3 - Configuration CONNECTED CLIENTS This feature shows all the currently connected wireless and LAN computers or PCs. CONNECTED WIRELESS CLIENTS This window displays authenticated wireless stations and their status. CONNECTED LAN CLIENTS This window displays all the entities which link to the LAN interface successfully. You can choose to block which entities and click the Block button BLOCKED MAC ADDRESS Click the Unblock button to unblock the blocked entities. D-Link DSL-2740B User Manual 83 Section 3 - Configuration STATISTICS This information reflects the current status of your router. WAN STATISTICS This window displays all the Receiver and Transmitted packet status on the WAN interface. LAN STATISTICS This window displays all the Receiver and Transmitted packet status on the LAN interface. D-Link DSL-2740B User Manual 84 Section 3 - Configuration ADSL STATISTICS This window displays all the ADSL status D-Link DSL-2740B User Manual 85 Section 3 - Configuration You can click the ADSL BER Test button to test the ADSL connection. You can click the Reset Statistics button to set all statistics to recount. D-Link DSL-2740B User Manual 86 Section 3 - Configuration To access the ROUTE INFO setting window, click on the ROUTE INFO button under the STATUS tab. The Route Info section displays route information showing the IP addresses of the destination, gateway, and subnet mask as well as other route information ROUTE INFO D-Link DSL-2740B User Manual 87 Section 4 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DSL-2740B. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.) 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
Internet Explorer 6.0 or higher Firefox 1.5 or higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DSL-2740B User Manual 88 Section 4 - Troubleshooting Configure your Internet settings:
the settings to their defaults. checked. Click on the OK. Go to Start > Settings > Control Panel. Double-click on the Internet Options Icon. From the Security tab, click on the button to restore Click on the Connection tab and set the dial-up option to Never Dial a Connection. Click on the LAN Settings button. Make sure nothing is Go to the Advanced tab and click on the button to restore these settings to their defaults. Click on the OK button three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for the web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.1.1. When logging in, type in the default User Name admin, and the default Password admin then click on the OK button to access the web-based manager. D-Link DSL-2740B User Manual 89 Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). D-Link DSL-2740B User Manual 90 Appendix A - Wireless Basics Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Gives everyone at home broadband access Surf the web, check email, instant message, download multimedia files. Gets rid of the cables around the house Simple and easy to use Small Office and Home Office Stay on top of everything at home as you would at the office Remotely access your office network from home Share the Internet connection and printer with multiple computers No need to dedicate office space Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. D-Link DSL-2740B User Manual 91 Appendix A - Wireless Basics Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Dont let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA security feature on the router. Refer to product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless router. Ad-Hoc Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more D-Link wireless network adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DSL-2740B User Manual 92 Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click on the OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DSL-2740B User Manual 93 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows XP - Click on Start > Control Panel > Network Connections. Windows 2000 - From the desktop, right-click on the My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click on the Properties. Step 4 Click on the Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click on the OK twice to save your settings. D-Link DSL-2740B User Manual 94 Appendix C Technical Specification Technical Specifications ADSL Standards ANSI T1.413 Issue 2 ITU G.992.1 (G.dmt) AnnexA ITU G.992.2 (G.lite) Annex A ITU G.994.1 (G.hs) ITU G.992.5 Annex A ADSL2 Standards ITU G.992.3 (G.dmt.bis) Annex A ITU G.992.4 (G.lite.bis) Annex A Protocols IEEE 802.1d Spanning Tree TCP/UDP ARP RARP ICMP RFC1058 RIP v1 RFC1213 SNMP v1 & v2c RFC1334 PAP RFC1389 RIP v2 RFC1577 Classical IP over ATM RFC1483/2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5 (AAL5) RFC1661 Point to Point Protocol RFC1994 CHAP RFC2131 DHCP Client /
DHCP Server RFC2364 PPP over ATM RFC2516 PPP over Ethernet Data Transfer Rate G.dmt full rate downstream: up to 8 Mbps / upstream: up to 1 Mbps Kbps 12 Mbps G.lite: ADSL downstream up to 1.5 Mbps / upstream up to 512 G.dmt.bis full rate downstream: up to 12 Mbps / upstream: up to ADSL full rate downstream: up to 24 Mbps / upstream: up to 1 Mbps Media Interface connection WIRELESS LAN ADSL interface: RJ-11 connector for connection to 24/26 AWG twisted pair telephone line LAN interface: RJ-45 port for 10/100BASE-T Ethernet 802.11b/g/n standards Wireless speed: up to 300Mbps (802.11n) Frequency range: 2.4 GHz to 2.484G Hz Antennas: 2 non-detachable dipole antennas. WEP data encryption WPA/WPA2 (Wi-Fi Protected Access) security Multiple SSID 802.11e Wireless QoS
(WMM/WME) MAC address-based access control
* Maximum wireless signal rate derived from IEEE Standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DSL-2740B User Manual 95 Appendix D Contacting Technical Support Statement FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Class B:
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a Particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Supprot:
DSL-2750B, DSL-2740B. DSL-2741B, DSL-2740U, DSL-2741U D-Link DSL-2740B User Manual 96 Appendix D Contacting Technical Support IC Caution English:
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Franaise:
Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interf rences qui peuvent affecter son fonctionnement. D-Link DSL-2740B User Manual 97 Appendix D Contacting Technical Support Contacting Technical Support You can find software updates and user documentation on the D-Link websites. If you require product support, we encourage you to browse our FAQ section on the Web Site before contacting the Support line. We have many FAQs which we hope will provide you a speedy resolution for your problem. For Customers within the United Kingdom & Ireland:
D-Link UK & Ireland Technical Support over the Internet:
http://www.dlink.co.uk ftp://ftp.dlink.co.uk D-Link UK & Ireland Technical Support over the Telephone:
08456 12 0003 (United Kingdom)
+1890 886 899 (Ireland) Lines Open 8.00am-10.00pm Mon-Fri 10.00am-7.00pm Sat & Sun For Customers within Canada:
D-Link Canada Technical Support over the Telephone:
1-800-361-5265 (Canada) Mon. to Fri. 7:30AM to 9:00PM EST D-Link Canada Technical Support over the Internet:
http://support.dlink.ca email: support@dlink.ca D-Link DSL-2740B User Manual 98
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2011-07-27 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2011-07-27
|
||||
| 1 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
| 1 | FCC Registration Number (FRN) |
0007371172
|
||||
| 1 | Physical Address |
17595 Mt. Herrmann
|
||||
| 1 |
Fountain Valley, California 92708
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
KA2
|
||||
| 1 | Equipment Product Code |
SL2740BF1
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
B**** A****
|
||||
| 1 | Title |
General Counsel
|
||||
| 1 | Telephone Number |
714-8********
|
||||
| 1 | Fax Number |
866-7********
|
||||
| 1 |
b******@dlink.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIRELESS 802.11n ADSL2/2+ 4-PORT ETHERNET ROUTER | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
||||
| 1 | Name |
S****** H****
|
||||
| 1 | Telephone Number |
+886-******** Extension:
|
||||
| 1 | Fax Number |
+886-********
|
||||
| 1 |
s******@dekra.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412 | 2462 | 0.352 | ||||||||||||||||||||||||||||||||||||
| 1 | 2 | 15C | 2422 | 2452 | 0.334 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC