all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manual | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 5.29 MiB | May 06 2013 | |||
1 2 |
|
Internal Photos | Internal Photos | 534.91 KiB | May 06 2013 | |||
1 2 |
|
External Photos | External Photos | 602.61 KiB | May 06 2013 | |||
1 2 |
|
Label Location | ID Label/Location Info | 71.85 KiB | May 06 2013 | |||
1 2 |
|
Label Sample | ID Label/Location Info | 386.08 KiB | May 06 2013 | |||
1 2 |
|
Attestation (Channel and Mode Declaration) | Attestation Statements | 69.25 KiB | May 06 2013 | |||
1 2 |
|
Confidentiality Request | Cover Letter(s) | 104.35 KiB | May 06 2013 | |||
1 2 |
|
Cover Letter (Agent Authorization) rev | Cover Letter(s) | 122.30 KiB | May 06 2013 | |||
1 2 |
|
Cover Letter (Contact Authorization) | Cover Letter(s) | 45.53 KiB | May 06 2013 | |||
1 2 |
|
Operational Description | Operational Description | 36.86 KiB | May 06 2013 | |||
1 2 | RF Exposure Info | May 06 2013 | ||||||
1 2 | Test Report | May 06 2013 | ||||||
1 2 | Test Report | May 06 2013 | ||||||
1 2 | Test Setup Photos | May 06 2013 |
1 2 | User Manual | Users Manual | 5.29 MiB | May 06 2013 |
Version 1.0 | 05/31/2013 User Manual Wireless AC600 Dual Band Cloud Router DIR-808L Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date Description May 31, 2013 Initial release for Revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2013 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DIR-808L User Manual i Table of Contents Table of Contents Preface.................................................................................. i Manual Revisions ........................................................................... i Trademarks ...................................................................................... i Product.Overview...............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 4 Hardware Overview ..................................................................... 5 Connections ........................................................................... 5 LEDs ........................................................................................... 6 Installation..........................................................................7 Before you Begin ........................................................................... 7 Wireless Installation Considerations ...................................... 8 Manual Setup ................................................................................. 9 Configuration....................................................................11 Quick Setup Wizard ....................................................................12 QRS Mobile App (iOS, Android) .............................................19 Web-based Configuration Utility ..........................................20 Internet Connection Setup .............................................21 Internet Connection Setup Wizard ...............................22 Internet (Manual Setup) ...................................................28 Internet Connection Type ...................................................29 Static (assigned by ISP) ................................................31 PPPoE (DSL) ......................................................................33 PPTP ....................................................................................35 L2TP ....................................................................................37 DS-Lite ...............................................................................39 Wireless Connection Setup Wizard ..............................40 Wi-Fi Protected Setup Wizard .........................................43 Manual Wireless Network Setup ...................................45 Manual Setup - 2.4 Ghz Band ....................................46 Manual Setup - 5 Ghz Band ........................................52 Wireless Security .................................................................57 What is WPA? ...................................................................57 Network Settings ................................................................58 Router Settings ...............................................................58 DHCP Server Settings ...................................................59 DHCP Reservation .........................................................61 IPv6 Internet Connection .................................................62 IPv6 Internet Connection Setup Wizard ................63 IPv6 Manual Setup.........................................................69 mydlinkTM Settings ..............................................................79 Advanced ...............................................................................82 Virtual Server ...................................................................82 Port Forwarding .............................................................83 Application Rules ...........................................................84 QoS Engine .......................................................................85 Network Filters ................................................................87 Access Control .................................................................88 D-Link DIR-808L User Manual ii Table of Contents Website Filters .................................................................91 Inbound Filters ................................................................92 Firewall Settings .............................................................93 Routing ..............................................................................95 Advanced Wireless ........................................................96 Wi-Fi Protected Setup (WPS) .....................................97 Advanced Network Settings ......................................99 Guest Zone .................................................................... 100 IPv6 Firewall .................................................................. 101 IPv6 Routing ................................................................. 102 Tools ..................................................................................... 103 Admin.............................................................................. 103 Time ................................................................................. 105 SysLog ............................................................................. 106 Email Settings............................................................... 107 System Settings ........................................................... 108 Firmware Update ........................................................ 109 Language Pack ............................................................. 109 Dynamic DNS ............................................................... 110 System Check ............................................................... 111 Schedules ...................................................................... 112 Status ................................................................................... 113 Device Info .................................................................... 113 Logs.................................................................................. 114 Statistics ......................................................................... 115 Internet Sessions ......................................................... 116 Routing ........................................................................... 117 Wireless........................................................................... 118 IPv6 .................................................................................. 119 IPV6 Routing ................................................................. 120 Support ............................................................................... 121 Connect.a.Wireless.Client.to.your.Router.....................122 WPS Button ................................................................................ 122 Windows 8 ................................................................................ 123 WPA/WPA2 ......................................................................... 123 Windows 7 ................................................................................ 125 WPA/WPA2 ......................................................................... 125 WPS ....................................................................................... 128 Windows Vista ......................................................................... 132 WPA/WPA2 ......................................................................... 133 WPS/WCN 2.0 .................................................................... 135 Windows XP ............................................................................. 136 WPA/WPA2 ......................................................................... 137 Troubleshooting.............................................................139 Wireless Modes ......................................................................... 143 Networking.Basics..........................................................144 Check your IP address ............................................................ 144 Assign a Static IP address ...................................................... 145 Technical.Specifications.................................................146 D-Link DIR-808L User Manual iii Section 1 - Product Overview Product Overview Package Contents DIR-808L Wireless AC600 Dual Band Cloud Router Ethernet Cable Power Adapter Wi-Fi Configuration Note Wi-Fi Configuration Note If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-808L will cause damage and void the warranty for this product. D-Link DIR-808L User Manual 1 Section 1 - Product Overview System Requirements Network.Requirements An Ethernet-based cable or DSL modem 802.11a, 802.11g, 802.11n, or 802.11ac wireless clients 10/100 Ethernet Computer.with.the.following:
Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter Web-based.Configuration. Utility.Requirements Browser.Requirements:
Internet Explorer 7 or higher Firefox 3.5 or higher Safari 4 or higher Chrome 8 or higher mydlink.Requirements Windows.Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. iPhone/iPad/iPod Touch (iOS 3.0 or higher) Android device (1.6 or higher) Computer with the following browser requirements:
Internet Explorer 7 or higher Firefox 3 or higher Safari 5 or higher Chrome 5 or higher iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-808L User Manual 2 Section 1 - Product Overview Introduction The D-Link DIR-808L is a draft IEEE 802.11ac compliant device that delivers speeds up to 3 times faster than 802.11n, while staying backward compatible with older 802.11b/g/n devices. Connect the DIR-808L to a cable or DSL modem and provide high-speed Internet access to multiple wireless clients. Powered by the latest 802.11ac technology, this router provides superior wireless coverage for small to medium sized homes. The DIR-808L also includes a 4-port 10/100 Fast Ethernet switch that connects Ethernet wired devices for high-speed wired connectivity. With the DIR-808L Wireless AC600 Dual Band Cloud Router you can monitor and manage your home network right from your laptop, iOS, or Android device. This cloud-enabled router can be configured to notify you whenever new devices are connected to your network or unwanted access is detected. Monitor in real-time websites that are being visited, with recent browser history displayed on the mydlink Lite app which is great for parents keeping an eye on children using the Internet at home. The D-Link Cloud Service can help you to detect and block unwelcome guests who attempt to access your wireless network, and any suspicious activities will be displayed right on your mydlink Lite app or browser. With some routers, all wired and wireless traffic, including VoIP, video streaming, online gaming, and web browsing is mixed together into a single data stream. By handling data this way, applications like video streaming could experience lags or delays. With D-Link Intelligent QoS Technology, wired and wireless traffic are analyzed and separated into multiple data streams. You can also assign priorities to different data streams to ensure that the traffic most important to you receives optimum bandwidth. The DIR-808L supports the latest wireless security features to help prevent unauthorized access, be it from inside your wireless network or from the Internet. Support for the WPA and WPA2 standards gives you a range of security and encryption choices, based on the capabilities of your wireless clients. In addition, this router utilizes dual active firewalls (SPI and NAT) to prevent potential attacks from across the Internet. D-Link DIR-808L User Manual 3 Section 1 - Product Overview Features
.Ultimate.Fast.Wireless.Networking - The DIR-808L provides a wireless connection up to 150 Mbps on the 2.4 GHz band, and up to 433 Mbps on the 5 GHz band. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11ac wireless router gives you the freedom of wireless networking at speeds up to three times faster than 802.11n. Compatible.with.802.11a/g/n.Devices - The DIR-808L remains fully compatible with the IEEE 802.11b, 802.11g and 802.11n standards, so it can connect your existing wireless clients, providing backwards compatibility for older devices. Advanced.Security.Features - The Web-based user interface displays a number of advanced network management features including:
Content.Filtering - Easily applied content filtering based on MAC address, URL, and/or domain name. Filter.Scheduling - These filters can be scheduled to be active on certain days or for a duration of hours or minutes. Secure.Multiple/Concurrent.Sessions - The DIR-808L can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-808L can securely access corporate networks. User-friendly.Setup.Wizard - Through its easy-to-use web-based user interface, the DIR-808L guides you through the process of setting up a customized, secure wireless network, allowing you to configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g, 802.11n and draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-808L User Manual 4 Section 1 - Product Overview Hardware Overview Connections 1 2 3 6 5 4 1 2 3 4 5 6 WPS Button LAN Ports (1-4) Internet Port Power Button Power Receptor Press to start the WPS process. The power LED will start to blink. Connect 10/100 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. Using an Ethernet cable, connect your broadband modem to this port. Press the power button to power on and off. Receptor for the supplied power adapter. Reset Button (Hole) Use a paperclip to depress the reset button and restore the router to its original factory settings. D-Link DIR-808L User Manual 5 Section 1 - Product Overview Hardware Overview LEDs 1 2 1 2 Power LED Internet LED A solid green light indicates a proper connection to the power supply. The light will blink green during the WPS process. The light will be solid orange during boot up. A solid light indicates connection on the Internet port. If the LED is orange, a connection is present but the router cannot connect to the Internet. D-Link DIR-808L User Manual 6 Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, an attic, or a garage. Before you Begin Please configure the router with the computer that was last connected directly to your modem. You can only use the Ethernet port on your modem. If you were using the USB connection before using this router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, Broadjump, or Enternet 300 from your computer, or you will not be able to connect to the Internet. D-Link DIR-808L User Manual 7 Section 2 - Installation Wireless Installation Considerations The DIR-808L Wireless AC600 Dual Band Cloud Router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials used and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the router and other network devices to a minimum - each wall or ceiling can reduce your adapters range by 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 0.5 meters thick (1.5 feet), at a 45-degree angle appears to be almost 1 meter (3 feet) thick. At a 2-degree angle it can appear over 14 meters (42 feet) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials can affect your wireless signal. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 wireless products (such as ceiling fans, lights, and home security systems), your wireless connection may be degraded dramatically or even drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-808L User Manual 8 Section 2 - Installation 1. Turn off and unplug your cable or DSL broadband modem. This is required. Manual Setup Modem 2. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage. 3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. 4 3 LAN 2 1 INTERNET POWER 12V 1A WPS RESET Computer DIR-808L D-Link DIR-808L User Manual 9 Section 2 - Installation 4. Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem. Computer DIR-808L 4 3 LAN 2 1 INTERNET POWER 12V 1A WPS RESET Modem INTERNET 5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes. 6. Connect the supplied power adaptor into the power port on the back of the router and then plug it into a power outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the router to boot up. Computer DIR-808L 4 3 LAN 2 1 INTERNET POWER 12V 1A WPS RESET Modem INTERNET 7. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and enter a web site. A solid light on the Internet LED indicates connection on the Internet port and the router can connect to the Internet. If the LED is orange, a connection is present but the router cannot connect to the Internet. D-Link DIR-808L User Manual 10 Section 3 - Configuration Configuration There are several different ways you can configure your router to connect to the Internet and connect to your clients:
Quick.Setup.Wizard - This wizard will launch when you log into the router for the first time. Refer to Quick Setup Wizard on page 12. QRS.Mobile.App.- Use your iOS or Android device to configure your router. Refer to QRS Mobile App (iOS, Android) on page 19. Manual.Setup - Log into the router and manually configure your router (advanced users only). Refer to Internet (Manual Setup) on page 28. D-Link DIR-808L User Manual 11 Section 3 - Configuration Quick Setup Wizard If this is your first time installing the router, open your web browser. You will automatically be directed to the Wizard Setup Screen. If not, enter http://dlinkrouter.local. Then, press Enter. If you have already configured your settings and you would like to access the configuration utility, please refer to Internet (Manual Setup) on page 28. If this is your first time logging into the router, this wizard will start automatically. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. This process may take a few minutes. D-Link DIR-808L User Manual 12 Section 3 - Configuration If the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Check the connection between your broadband modem to the Internet port and then click Prev.to return to the previous page and try again. If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide.me. through.the.Internet.Connection.Settings to display a list of connection types to choose from. Select your Internet connection type and click Next to continue. D-Link DIR-808L User Manual 13 Section 3 - Configuration If the router detected, or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove any PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected, or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-808L User Manual 14 Section 3 - Configuration If the router detected, or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. For both the 2.4 GHz and 5 GHz bands, create a Wi-Fi network name (SSID) using up to 32 characters. These names will identify your wireless network. Create a Wi-Fi password (Network Key) (between 8-63 characters). Your wireless clients will need to have this password or key entered to be able to connect to your wireless network. It is recommended that you make a record of this information for future reference. Click Next to continue. In order to secure your router, please enter a new password, which will be used to access the web-based configuration utility. Check the Enable. Graphical.Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. D-Link DIR-808L User Manual 15 Section 3 - Configuration Select your time zone from the drop-down menu and click Next to continue. The next window will display your Wi-Fi settings and confirm the completion of the setup process. Click Next to continue. If you want to create a bookmark for the routers web-based configuration utility, click OK. Click Cancel if you do not want to create a bookmark. If you clicked Yes, a window may appear (depending on which web browser you are using) to create a bookmark. D-Link DIR-808L User Manual 16 Section 3 - Configuration To use the mydlink service (mydlink.com or the mydlink Lite app), you must have an account. Select whether you do have a mydlink account or if you need to create one. Click Next to continue. If you do not want to register at this time, click Cancel. If you clicked Yes, enter your mydlink account name (email address) and password. Click Login to register your router. If you clicked No, fill out the requested information, check the box to accept the terms and conditions of use, and click Sign.Up to create your mydlink account. Click the hyperlink if you wish to read the terms and conditions before you proceed. D-Link DIR-808L User Manual 17 Section 3 - Configuration The mydlink app will allow you to receive notifications, browse network usage, and configure your router from an iOS (3.0 or higher), Android (1.6 or higher) device. To download the "mydlink lite" app, visit the iOS App Store, Google Play Store, or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DIR-808L User Manual 18 Section 3 - Configuration QRS Mobile App (iOS, Android) D-Link offers an app for your iOS or Android device which will assist you to install and configure your router. Step.1 From an iOS device, go to the iOS App Store. From an Android device go to the Google Play Store. Search for D-Link, select QRS.Mobile, and download the app to your device. You may also scan the appropriate code on the right to locate the app download page. iOS Android Step.2 Once you have installed the app, you can now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password. Step.3 Once you have connected to the router, launch the QRS mobile app and it will guide you through the installation of your router. D-Link DIR-808L User Manual 19 Section 3 - Configuration Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the address of the router
(http://dlinkrouter.local.or.http://192.168.0.1). Non-Windows and Non-Mac users may also connect by typing http://192.168.0.1 in the address bar. Enter Admin as the administrator login name. Leave the password blank by default. Click Login to continue. D-Link DIR-808L User Manual 20 Section 3 - Configuration Internet Connection Setup If you want to configure your router to connect to the Internet using the wizard, click Internet.Connection.Setup.Wizard. You will be directed to the Quick Setup Wizard. Click Manual.Internet.Connection.Setup to configure your connection manually and continue to the next page. D-Link DIR-808L User Manual 21 Section 3 - Configuration Internet Connection Setup Wizard When configuring the router for the first time, we recommend that you use the Internet. Connection.Setup.Wizard, and follow the instructions on the screen. This wizard is designed to provide users with a quick and easy method to configure the Internet connectivity of this router. At any time during the Internet Connection Setup Wizard, users can click on the Cancel button to discard any changes made and return to the main Internet page. Also, users can click on the Prev button to return to the previous window for re-configuration. Welcome:
This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next.to continue. Step.1:.Set.Your.Password By default, the router does not have a password configured for administrator access to the Web-based configuration pages. To secure your new networking device, please enter and verify a password in the spaces provided. The two passwords must match. You should also make a record of this password for future reference. Click Next.to continue. D-Link DIR-808L User Manual 22 Section 3 - Configuration Step.2:.Select.Your.Time.Zone Select the appropriate time zone for your location. This information is required to configure the time-based options for the router. Click Next.to continue. Step.3:.Internet.Connection Here the user will be able to configure the Internet connectivity used by this device. If your ISP connection is listed in the drop-down menu, select it and click Next. If your ISP connection is not listed then you can proceed to select any of the other manual Internet connection methods listed below. Dynamic.IP.Address:
Choose this if your Internet connection automatically provides you with an IP address. Most cable modems use this type of connection. PPPoE:
Choose this option if your Internet connection requires a PPPoE username and password to access the Internet. Most DSL modems use this type of connection. PPTP:
Choose this option if your Internet connection requires a PPTP username and password to access the Internet. L2TP:
Choose this option if your Internet connection requires an L2TP username and password to access the Internet. Static.IP.Address:
Choose this option if your Internet Service Provider provided you with IP Address information that has to be manually configured. D-Link DIR-808L User Manual 23 Section 3 - Configuration Step.3:.Internet.Connection.(Dynamic.IP.Address) After selecting the Dynamic IP Address Internet connection method, the following page will appear. The following parameters will be available for configuration:
MAC.Address: Enter the MAC address of the Internet gateway (plugged into the Internet port of this device) here. Copy.Button: If the configuration PC also acts as the Internet gate-
way, then click on the Copy Your PCs MAC Address button to copy the PCs MAC address into the space provided. If youre not sure, leave the MAC address field blank. Host.Name: Enter the host name used here. You may also need to provide a host name. If you do not have or know this information, please contact your ISP. Click Next to continue. Step.3:.Internet.Connection.(PPPoE) After selecting the PPPoE Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address.Mode: Choose the IP address mode for your PPPoE connection. IP.Address: If you are using Static. PPPoE, enter the IP address provided by your ISP. User.Name: Enter the PPPoE account user name used here. This information is given by the ISP. Password: Enter the PPPoE account password used here. This information is given by the ISP. Service.Name: You may be required to enter a service name by your ISP. D-Link DIR-808L User Manual 24 Section 3 - Configuration Step.3:.Internet.Connection.(PPTP) After selecting the PPTP Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address.Mode: Here the user can specify whether this Internet connection requires the use of a dynamic or static IP address. PPTP usually requires a dynamic IP configuration. PPTP.IP.Address: Enter the PPTP IP address used here. This option is only available if Static IP is selected. PPTP.Subnet.Mask: Enter the PPTP subnet mask used here. PPTP.Gateway.IP.Address: Enter the PPTP gateway IP address used here. PPTP.Server.IP.Address: Enter the PPTP server IP address used here. This is normally the same a the PPTP gateway IP address. User.Name: Enter the PPTP username used here. Password: Enter the PPTP password used here. Verify.Password: Re-enter the PPTP password used here. Click Next.to continue. D-Link DIR-808L User Manual 25 Section 3 - Configuration Step.3:.Internet.Connection.(L2TP) After selecting the L2TP.Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address.Mode: Here the user can specify whether this Internet connection requires the use of a dynamic or static IP address. L2TP usual requires a dynamic IP configuration. L2TP.IP.Address: Enter the L2TP IP address used here. This option is only available if Static IP is selected. L2TP.Subnet.Mask: Enter the L2TP subnet mask used here. L2TP.Gateway.IP.Address: Enter the L2TP gateway IP address used here. L2TP.Server.IP.Address: Enter the L2TP server IP address used here. This is normally the same a the L2TP gateway IP address. User.Name: Enter the L2TP username used here. Password: Enter the L2TP password used here. Verify.Password: Re-enter the L2TP password used here. Click Next.to continue. D-Link DIR-808L User Manual 26 Section 3 - Configuration Step.3:.Internet.Connection.(Static.IP.Address) After selecting the Static.IP.Address Internet connection method, the following page will appear:
The following parameters will be available for configuration:
IP.Address: Enter the static IP address provided by the ISP here. Subnet.Mask: Enter the subnet mask provided by the ISP here. Gateway.Address: Enter the gateway IP address provided by the ISP here. Primary.DNS.Address: Enter the primary DNS IP address used here. Secondary.DNS.Address: Enter the secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. Click Next to continue. Setup.Complete!
This is the last page of the Internet Connection Setup Wizard. Click the Connect button to save your settings. D-Link DIR-808L User Manual 27 Section 3 - Configuration Internet (Manual Setup) On this page the you can configure the Internet connection settings manually. To access the Manual Internet Connection Setup page, click on the Manual.Internet. Connection.Setup button. On this page there are multiple parameters that can be configured regarding the Internet connection setup. At any stage throughout the wizard, you can save the current configuration by click-
ing on the Save.Settings button. If you wish to discard the changes made, click on the Dont.Save.Settings button. D-Link DIR-808L User Manual 28 Section 3 - Configuration Internet Connection Type In this section, you can select from a list of Internet connection types that can be configured and used on this router. Options to choose from are Static.IP, Dynamic.IP, PPPoE, PPTP, L2TP, and DS-Lite. After selecting a specific Internet connection type, this page will automatically refresh and provide unique fields to configure related to the specified Internet connection type. My Internet Connection is: Dynamic IP (DHCP) The default WAN configuration for this router is Dynamic.IP.(DHCP). This option allows the router to obtain an IP address automatically from the device that is con-
nected to the Internet port. Note: If youre not sure about the type of Internet connection you have, please con-
tact your Internet Service Provider (ISP) for assistance. After selecting Dynamic.IP, the following parameters will be available for configuration:
Check the box to enable advanced DNS service Enable Advanced DNS Service:
Host Name: The host name is optional, but may be required by some ISPs. Leave blank if you are not sure. Use Unicasting: Tick this option if your ISP uses the unicast method to provide IP addresses. Primary DNS: Enter the primary DNS IP address used here. Secondary DNS: Enter the secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. The de-
fault MTU is 1500. D-Link DIR-808L User Manual 29 Section 3 - Configuration MAC Address: The default MAC address is set to the Internet ports physi-
cal interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PCs. MAC. Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 30 Section 3 - Configuration Manual Internet Setup Static (assigned by ISP) Select Static.IP.Address if your Internet Service Provider has supplied you with IP settings. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets each separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format. My Internet Connection:
Select Static.IP to manually enter the IP settings supplied by your ISP. Enable Advanced DNS Service:
Check the box to enable advanced DNS service. IP Address:
Enter the IP address assigned by your ISP. Subnet Mask:
Enter the subnet mask assigned by your ISP. Default Gateway:
Primary DNS Server:
Enter the gateway assigned by your ISP. Enter the primary DNS IP address used here Secondary DNS Server:
Enter the secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. D-Link DIR-808L User Manual 31 Section 3 - Configuration MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address:
The default MAC address is set to the Internet ports physical interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PCs.MAC. Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 32 Section 3 - Configuration Internet Setup PPPoE (DSL) Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password in this case. This option is typically used for DSL services. Make sure to remove any existing PPPoE software from your computer. The software is no longer needed and will not work through a router. My Internet Connection: Select PPPoE (Username/Password) from the drop-down menu. Advanced DNS Service: Check the box to enable advanced DNS service. Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static. IP address. PPPoE usually requires a Dynamic IP configuration. IP Address: Enter the PPPoE IP address used here. This option is only available if Static.IP is selected. Username: Enter the PPPoE account user name used here. This informa-
tion is given by the ISP. Password: Enter the PPPoE account password used here. This informa-
tion is given by the ISP. Verify Password: Re-enter the PPPoE account password used here. Service Name: This optional field enables the user to enter a service name to identify this Internet connection here. Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user can specify a custom schedule or specify the On.Demand, or Manual option. To specify a custom schedule, use the drop-
down menu to select one of the schedules that has been de-
fined in the Schedules page. D-Link DIR-808L User Manual 33 Section 3 - Configuration Maximum Idle Time: Enter a maximum idle time during which the Internet con-
nection is maintained during inactivity. To disable this feature, set the reconnect mode to Always.on. Primary DNS Server: Enter the primary DNS IP address used here. Secondary DNS Server: Enter the secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. The default MTU is 1492. MAC Address: The default MAC address is set to the Internet ports physi-
cal interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PCs. MAC. Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 34 Section 3 - Configuration Internet Setup PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection:
Select PPTP.(Username/Password) from the drop-down menu. Advanced DNS Service:
Check the box to enable advanced DNS service. Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static. IP address. PPTP usually requires a dynamic IP configuration. PPTP IP Address: Enter the PPTP IP address used here. This option is only available if static IP is selected. PPTP Subnet Mask: Enter the PPTP subnet mask used here. PPTP Gateway IP Address:
Enter the PPTP gateway IP address used here. PPTP Server IP Address:
Enter the PPTP server IP address used here. This is normally the same a the PPTP gateway IP address. Username: Enter the PPTP username used here. Password: Enter the PPTP password used here. Verify Password: Re-enter the PPTP password used here. D-Link DIR-808L User Manual 35 Section 3 - Configuration Reconnect Mode: Use the radio buttons to specify the reconnect mode. You can specify a custom schedule or specify the On.Demand, or Manual option. To specify a custom schedule, use the drop-
down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New.Schedule button to open the Schedules page. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, set the reconnect mode to Always.on. Primary DNS Server: Enter the primary DNS IP address used here. Secondary DNS Server: Enter the secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. MAC Address: The default MAC address is set to the Internet ports physical interface MAC address on the broadband router. It is not rec-
ommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PCs.MAC. Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 36 Section 3 - Configuration Internet Setup L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection:
Select L2TP. (Username/Password). from the drop-down menu. Advanced DNS Service:
Check the box to enable advanced DNS service. Address Mode: Here the user can specify whether this Internet connection requires the use of a dynamic or static IP address. L2TP usual requires a dynamic IP configuration. L2TP IP Address: Enter the L2TP IP address used here. This option is only avail-
able if Static.IP is selected. L2TP Subnet Mask: Enter the L2TP subnet mask used here. L2TP Gateway IP Address:
Enter the L2TP gateway IP address used here. L2TP Server IP Address:
Enter the L2TP server IP address used here. This is normally the same a the L2TP gateway IP address. Username: Enter the L2TP username used here. Password: Enter the L2TP password used here. Verify Password: Re-enter the L2TP password used here. D-Link DIR-808L User Manual 37 Section 3 - Configuration Reconnect Mode: Use the radio buttons to specify the reconnect mode. You can specify a custom schedule or specify the On.Demand, or Manual option. To specify a custom schedule, use the drop-
down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New.Schedule button to open the Schedules page. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, set the reconnect mode to Always on. Primary DNS Server: Enter the primary DNS IP address used here. Secondary DNS Server: Enter the secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. MAC Address: The default MAC address is set to the Internet ports physical interface MAC address on the broadband router. It is not rec-
ommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PCs.MAC. Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Link DIR-808L User Manual 38 Section 3 - Configuration Internet Setup DS-Lite DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
DS-Lite Configuration: Select the DS-Lite. DHCPv6. Option to let the router allocate the AFTR IPv6 address automatically. Select Manual. Configuration to enter the AFTR IPv6 address in manually. AFTR IPv6 Address: After selecting the Manual Configuration option above, the user can enter the AFTR IPv6 address used here. B4 IPv4 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address: Once connected, the WAN IPv6 address will be displayed here. IPv6 WAN Default Gateway Once connected, the IPv6 WAN Default Gateway address will be displayed here. Click on the Save.Settings button to accept the changes made. Click on the Dont.Save.Settings button to discard the changes made. D-Link DIR-808L User Manual 39 Section 3 - Configuration Wireless Connection Setup Wizard On this page you can configure the wireless settings for this device. There are three ways to configure wireless using this router. Firstly, the user can make use of the quick and easy Wireless Connection Setup Wizard. Secondly, the user can choose Wi-Fi Protected Setup. Lastly, the user can configure the wireless settings manually. Wireless Settings: Wireless Connection Setup Wizard The Wireless Connection Setup Wizard is specially designed to assist basic network users with a simple, step-by-step set of instructions to configure the wireless settings of this router. It is highly recommended to customize the wireless network settings to fit into your environment and to add higher security. To initiate the Wireless Connection Setup Wizard click on the Wireless Network Setup Wizard button. Step.1: In this step, you must enter a custom wireless network name or SSID. Enter the new Network Name (SSID) in the appropriate space provided. By default, the SSID selected for the 2.4 GHz network name will be the same for the 5 GHz network name. Users can check the Manually.set.5.GHz.band.Network. Name(SSID) checkbox to specify a different SSID for the 5 GHz band. You can choose between two wireless security wizard configurations. Users can select Automatically.assign.a.network.key, by which the router will automatically generate a WPA/WPA2 pre-shared key using the TKIP and AES encryption methods;
or you can select Manually.assign.a.network.key by which you will be prompted to manually enter a WPA/WPA2 pre-shared key using the TKIP and AES encryption methods. At any stage during this wizard, you can click on the Prev button to return to the previous page, click on the Next button to continue to the next page, or click on the Cancel button to discard the changes made and return to the main wireless page. D-Link DIR-808L User Manual 40 Section 3 - Configuration Step. 2: This step will only be available if you have selected Manually. assign. a. network.key in the previous step. Here you can manually enter the WPA/WPA2 pre-
shared key in the Wireless Security Password space provided. The key entered must be between 8 and 63 characters long. Remember, this key will be used when wireless clients connect to this device, so it is important to make a record of this key to prevent trouble when accessing your wireless network in the future. If you wish to use the same Wireless Security Password for both 2.4 GHz and 5 GHz bands, check the option provided. If not selected, you need to input two separate wireless security passwords for each individual wireless band. Click on the Next button to advance to the next step. Setup.Complete: The wireless configuration information will be summarized on this page. It is recommended that you check the correctness of these settings and make a record of the information listed on this page for future reference. Click on the Save button to complete the setup wizard and save the changes made. D-Link DIR-808L User Manual 41 Section 3 - Configuration After clicking the Save button, the device will save the settings made and return to the main wireless page. End of Wizard. D-Link DIR-808L User Manual 42 Section 3 - Configuration Wi-Fi Protected Setup Wizard Wireless Settings: Wi-Fi Protected Setup Wizard If your wireless clients support the W-Fi Protected Setup (WPS) connection method, this wizard can be used to initiate a secure wireless connection between this device and wireless clients with a simple click of the WPS button. The Wi-Fi Protected Setup wizard is specially designed to assist basic network users with a simple, step-by-step set of instructions to connect wireless clients to this router securely using the WPS method. To initiate the Wi-Fi Protected Setup wizard click on the Add.Wireless.Device.with. WPS button. Step.1: In this step there are two options to choose from. You can choose Auto if the wireless client supports WPS, or Manual if the wireless client does not support WPS. At any stage during this wizard, you can click on the Prev button to return to the previous page, click on the Next button to continue to the next page, or click on the Cancel button to discard the changes made and return to the main wireless page. Step.2.-.Auto: After selecting Auto, the following page will appear. There are two ways to add a wireless device which supports WPS. Firstly, the Personal Identification Number (PIN) method will prompt you to enter the PIN code which was provided with your wireless device. This PIN code should be identical on the wireless client. Secondly, the Push Button Configuration (PBC) method will allow the wireless client to connect to your router by pressing the WPS button on the client device. Choose the preferred method of WPS and click on the Connect button to establish a connection. D-Link DIR-808L User Manual 43 Section 3 - Configuration Step.2.-.Manual: After selecting Manual, the following page will appear. On this page you can view the wireless configuration of this router. The wireless clients should configure their wireless settings to be identical to the settings displayed on this page for a successful connection. This option is for wireless clients that do not support the WPS Push Button method to connect to this router. It is recommended that you make a record of this information for future reference. Click on the OK button to the Wireless Settings page. End of Wizard. D-Link DIR-808L User Manual 44 Section 3 - Configuration Manual Wireless Network Setup Wireless Settings: Manual Wireless Network Setup The Manual Wireless Network Setup option allows you to configure the wireless settings of this device manually. This option is for advanced users and includes all parameters that can be configured for wireless connectivity. To initiate the Manual Wireless Setup page, click on the Manual.Wireless. Connection.Setup button. At any stage during setup, you can click on the Save.Settings button to save the current configuration, or click on the Dont. Save. Settings button to discard any changes made and return to the main wireless setup page. D-Link DIR-808L User Manual 45 Section 3 - Configuration Manual Setup - 2.4 Ghz Band The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being configured. The following configuration relates to the 2.4 GHz band. Enable Wireless: Tick the box to enable the wireless function. Select Always. from the drop-down menu to enable wireless at all times. If you do not want to use wireless, uncheck the box to disable all wireless functions. To set a schedule for the times when you want the wireless network to be available, click on the Add.New button to specify a new schedule. Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive. 802.11 Mode: Here you can manually select the preferred wireless standard to use for this wireless network. You should select the 802.11 mode according to the capabilities of the wireless clients/
devices which will be accessing this network. If only 802.11n devices will be accessing your network, it is recommended to set the 802.11 mode to 802.11n.only. Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the wireless channel with the least amount of interference. Wireless Channel: If auto channel scan is disabled, you can select your preferred wireless channel. By default the channel is set to 1. The channel can be changed to fit the channel setting for an existing wire-
less network or to customize the wireless network. Transmission Rate: Select the transmission rate. It is strongly suggested that Best.
(Automatic) is selected for best performance. D-Link DIR-808L User Manual 46 Section 3 - Configuration Channel Width: When using the 802.11n frequency band, you have an option to choose between a 20 MHz only, or 20/40 MHz bandwidth. Visibility Status: This option allows you to adjust the visibility of your SSID. If Visible is selected, the SSID of your wireless network will be visible to any wireless clients within range of the signal. If Invisible mode is selected, clients must search for the SSID of your wireless network manually in order to connect to the network. D-Link DIR-808L User Manual 47 Section 3 - Configuration By default the wireless security of this router will be disabled. In this option you can enable or disable wireless security for the frequency band 2.4 GHz. There are two types of encryption that can be used: WEP or WPA/WPA2. For further information on these security types, please refer to Wireless Security on page 57. Wireless Security Mode: WEP Wired Equivalent Privacy (WEP) is the most basic form of encryption that can be used for wireless networks. WEP is considered to be a relatively weak security method, however it provides more protection than an unsecured network. Older wireless adapters may only support WEP encryption. It is recommended that this method is used only if your wireless clients do not support WPA. The following parameters are available for configuration:
WEP Key Length: Here the user can specify to either use a 64-bit or a 128-bit encryption key. Authentication: Authentication is a process by which the router verifies the identity of a network device that is attempting to join the wireless network. There are two types authentication for this device when using WEP. Open. System allows all wireless devices to communicate with the router before they are required to provide the encryption key needed to gain access to the network. Shared. Key requires any wireless device attempting to communicate with the router to pro-
vide the encryption key needed to access the network before they are allowed to communicate with the router. WEP Key 1: Enter the WEP key used here. For 64-bit keys you must enter 10 hex digits into each key box. For 128-bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys. D-Link DIR-808L User Manual 48 Section 3 - Configuration Wireless Security Mode: WPA-Personal Wi-Fi Protected Access (WPA) is the most advanced wireless encryption method used today. This is the recommended wireless security option. WPA supports two authen-
tication frameworks. Personal (PSK) and Enterprise (EAP). Personal requires only the use of a passphrase (Pre-Shared Key) for security. The following parameters will be available for configuration:
WPA Mode: WPA is an older standard; select this option if the clients that will be used with the router only support this older stan-
dard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. Select Auto.(WPA.or.WPA2) to have the security set automatically depending on the compatibility of connected clients. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2.Only option, the router associates only with clients that also support WPA2 security. Cipher Type: Select the appropriate cipher type to use here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), or Both (TKIP.and.AES). Group Key Update Interval:
Enter the amount of time before the group key used for broadcast and multicast data is changed. Pre-Shared Key: Enter the password to be used for the wireless network here. This password is required by wireless clients for them to be able to connect to the wireless network successfully. D-Link DIR-808L User Manual 49 Section 3 - Configuration Wireless Security Mode: WPA-Enterprise WPA-Enterprise is a more sophisticated level of wireless security which requires a RADIUS Authentication Server. This form of security is used primarily in medium to large-scale network environments. The following parameters will be available for configuration:
WPA Mode: WPA is an older standard; select this option if the clients that will be used with the router only support this standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. Select Auto.(WPA.or.WPA2) to have the security set automatically depending on the com-
patibility of connected clients. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2.Only option, the router asso-
ciates only with clients that also support WPA2 security. Cipher Type: Select the appropriate cipher type to use here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), and Both (TKIP.and. AES). Group Key Update Interval:
Enter the amount of time before the group key used for broadcast and multicast data is changed. Authentication Timeout:
Specifies the amount of time before a client will be required to re-authenticate. RADIUS Server IP Address:
When the user chooses to use the EAP authentication frame-
work, the RADIUS servers IP address can be entered here. RADIUS Server Port: When you can choose to use the EAP authentication framework, the RADIUS servers port number can be entered here. RADIUS Server Shared Secret:
Enter the shared secret (password) used here. This password needs to be the same on all of the wireless clients for them to be able to connect to the wireless network successfully. D-Link DIR-808L User Manual 50 Section 3 - Configuration MAC Address Authentication:
Optional backup RADIUS server:
Select this option to include authentication of clients according to their MAC address. This option allows you to specify a secondary RADIUS server to be used in the event that the primary RADIUS server fails. Enter the information for the secondary server in the same manner as the primary server described in the steps on the previous page. D-Link DIR-808L User Manual 51 Section 3 - Configuration Manual Setup - 5 Ghz Band The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being configured. The following configuration relates to the 5.GHz band. Enable Wireless: Check the box to enable the wireless function at all times. If you do not want to use wireless, uncheck the box to disable all wireless functions. To set a schedule for the times when you want the wireless network to be available, click on the Add.New button to specify a new schedule. Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive. 802.11 Mode: Here you can manually select the preferred frequency band to use for this wireless network. Enable Auto Channel Scan:
The auto channel selection setting can be selected to allow this device to choose the channel with the least amount of interference. Wireless Channel: If Auto Channel Scan is not enabled, you can manually select a wireless channel. By default the channel is set to 36. The channel can be changed to fit the channel setting for an ex-
isting wireless network or to customize the wireless network. Transmission Rate: Select the transmission rate. It is strongly suggested to select Best (Automatic) for best performance. Channel Width: When using the 802.11n frequency band, you have an option to choose between a 20 MHz, 20/40 MHz, or 20/40/80 MHz bandwidth for 802.11ac. Visibility Status: This option allows you to adjust the visibility of your SSID. If Visible is selected, the SSID of your wireless network will be visible to any wireless clients within range of the signal. If In-
visible mode is selected, clients must search for the SSID of your wireless network manually in order to connect to the network. D-Link DIR-808L User Manual 52 Section 3 - Configuration By default the wireless security of this router will be disabled. In this option you can enable or disable wireless security for the frequency band 2.4 GHz. There are two types of encryption that can be used: WEP or WPA/WPA2. For further information on these security types, please refer to Wireless Security on page 57. Wireless Security Mode: WEP Wired Equivalent Privacy (WEP) is the most basic form of encryption that can be used for wireless networks. WEP is considered to be a relatively weak security method, however it provides more protection than an unsecured network. Older wireless adapters may only support WEP encryption. It is recommended that this method is used only if your wireless clients do not support WPA. The following parameters will be available for configuration:
WEP Key Length: Here the user can specify to either use a 64-Bit or a 128-Bit encrypted key. Authentication: Authentication is a process by which the router verifies the identity of a network device that is attempting to join the wireless network. There are two types authentication for this device when using WEP. Open. System allows all wire-
less devices to communicate with the router before they are required to provide the encryption key needed to gain access to the network. Shared.Key requires any wireless device attempting to communicate with the router to provide the encryption key needed to access the network before they are allowed to communicate with the router. WEP Key 1: Enter the WEP key used here. For 64-bit keys you must enter 10 hex digits into each key box. For 128-bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys. D-Link DIR-808L User Manual 53 Section 3 - Configuration Wireless Security Mode: WPA-Personal Wi-Fi Protected Access (WPA) is the most advanced wireless encryption method used today. This is the recommended wireless security option. WPA supports two authentication frameworks. Personal (PSK) and Enterprise (EAP). Personal requires only the use of a passphrase (Pre-Shared Key) for security. The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this option if the clients that will be used with the router only support the older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. Select Auto.(WPA.or.WPA2) to have the security set automatically depending on the compatibility of connected clients. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2.Only option, the router associates only with clients that also support WPA2 security. Cipher Type: Select the appropriate cipher type to use here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), and Both (TKIP. and. AES). Group Key Update Interval:
Enter the amount of time before the group key used for broadcast and multicast data is changed. Pre-Shared Key: Enter the password to be used for the wireless network here. This password is required by wireless clients for them to be able to connect to the wireless network successfully. D-Link DIR-808L User Manual 54 Section 3 - Configuration Wireless Security Mode: WPA-Enterprise WPA-Enterprise is a more sophisticated level of wireless security which requires a RADIUS Authentication Server. This form of security is used primarily in medium to large-scale network environments. The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this option if the clients that will be used with the router only support this older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. Select Auto.(WPA.or.WPA2) to have the security set automatically depending on the compatibility of connected clients. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2.Only option, the router associates only with clients that also support WPA2 security. Cipher Type: Select the appropriate cipher type to use here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), and Both (TKIP. and. AES). Enter the amount of time before the group key used for broadcast and multicast data is changed. Group Key Update Interval:
Authentication Timeout:
RADIUS Server IP Address:
Specifies the amount of time before a client will be required to re-authenticate. When you choose to use the EAP authentication framework, the RADIUS servers IP address can be entered here. RADIUS Server Shared Secret:
RADIUS Server Port: When the user chooses to use the EAP authentication frame-
work, the RADIUS servers port number can be entered here. Enter the shared secret (password) used here. This password needs to be the same on all of the wireless clients for them to be able to connect to the wireless network successfully. Select this option to include authentication of clients according to their MAC address. MAC Address Authentication:
D-Link DIR-808L User Manual 55 Section 3 - Configuration Optional Backup RADIUS Server:
This option allows you to specify a secondary RADIUS server to be used in the event that the primary RADIUS server fails. Enter the information for the secondary server in the same manner as the primary server described in the steps on the previous page. D-Link DIR-808L User Manual 56 Section 3 - Configuration Wireless Security This section discusses the different levels of security you can use to protect your data from intruders. The DIR-808L offers the following types of security:
WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK (Pre-Shared Key) WPA-PSK (Pre-Shared Key) Wired Equivalent Privacy (WEP) WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP. The 2 major improvements over WEP:
What is WPA?
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-808L User Manual 57 Section 3 - Configuration Network Settings This section will allow you to change the local network settings of the router and to configure the DHCP settings. Router Settings Router IP Address:
Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save.Settings, you will need to enter the new IP address in your browser in order to return to the configuration utility. Subnet Mask:
Enter the subnet mask. The default subnet mask is 255.255.255.0. Device Name:
Enter a name for the router. Local Domain:
Enter the domain name (Optional). Enable DNS Relay:
Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-808L User Manual 58 Section 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Configuration Protocol. The DIR-808L has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. If using DHCP, be sure to set your computers to be DHCP clients by setting their TCP/IP settings to Obtain.an.IP.Address.Automatically. When your wireless devices connect to the router, they will automatically load the TCP/IP settings provided by the DIR-808L. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting device. You must specify the starting and ending address of the IP address pool. Enable DHCP Server:
Check this box to enable the DHCP server on your router. Uncheck to disable this function. DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time:
The length of time for the IP address lease. Enter the Lease time in minutes. Always Broadcast:
If all the computers on the LAN successfully obtain their IP addresses from the routers DHCP server as expected, this option can remain disabled. However, if one of the computers on the LAN fails to obtain an IP address from the routers DHCP server, it may have an old DHCP client that incorrectly turns off the broadcast flag of DHCP packets. Enabling this option will cause the router to always broadcast its responses to all clients, thereby working around the problem, at the cost of increased broadcast traffic on the LAN. NetBIOS Announcement:
Check this box to allow the DHCP Server to offer NetBIOS configuration settings to the LAN hosts. NetBIOS allows LAN hosts to discover all other computers within the network. D-Link DIR-808L User Manual 59 Section 3 - Configuration Learn NetBIOS from WAN:
If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn this setting off to configure manually. NetBIOS Scope:
This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS domain name under which network hosts operate. This setting has no effect if Learn.NetBIOS.information.from. WAN is activated. NetBIOS Node Type:
This field indicates how network hosts are to perform NetBIOS name registration and discovery. Broadcast.only indicates to use local network broadcast ONLY. This setting is useful where there are no WINS servers available, however, it is recommended that you try Mixed-
mode operation first. This setting has no effect if the Learn.NetBIOS. information.from.WAN option is activated. Point-to-point indicates to use WINS servers ONLY. This setting is useful to force all NetBIOS operations to the configured WINS servers. You must have configured at least the primary WINS server IP to point to a working WINS server. Mixed-mode (default), this indicates a Mixed-Mode of operation. First a broadcast operation is performed to register hosts and discover other hosts, if the broadcast operation fails, WINS servers are tried, if any. This mode favours broadcast operations which may be preferred if WINS servers are reachable by a slow network link and the majority of network services such as servers and printers are local to the LAN. Hybrid indicates a Hybrid-State of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode if you have configured WINS servers. Primary WINS IP Address:
Secondary WINS IP Address:
Enter your primary WINS Server IP address. Enter your secondary WINS Server IP address. D-Link DIR-808L User Manual 60 Section 3 - Configuration DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the specified IP address only to that computer or device. Note: This IP address must be within the DHCP IP address range. Enable:
Check this box to enable the reservation. Computer Name:
Enter the computer name or select from the drop-down menu and click <<. IP Address:
Enter the IP address you want to assign to the computer or device. This IP address must be within the DHCP IP address range. MAC Address:
Enter the MAC address of the computer or device. Copy Your PCs MAC Address:
If you want to assign an IP address to the computer you are currently on, click this button to populate the fields. Save:
Click Save to save your entry. You must click Save.Settings.at the top to activate your reservations. DHCP Reservations List DHCP Reservations List:
Displays any reservation entries. Displays the host name (name of your computer or device), MAC address, and IP address. Enable:
Check to enable the reservation. Edit:
Click the edit icon to make changes to the reservation entry. Delete:
Click on the trash can icon to remove the reservation from the list. D-Link DIR-808L User Manual 61 Section 3 - Configuration IPv6 Internet Connection On this page, you can configure the IPv6 connection type. There are two ways to set up the IPv6 Internet connection. You can use the Web-based IPv6 Internet Connection Setup Wizard, or you can manually configure the connection. For beginner users that have not configured a router before, click on the IPv6.Internet. Connection.Setup.Wizard.button and the router will guide you through a few simple steps to get your network up and running. For the advanced user that has configured a router before, click on the Manual.IPv6. Internet.Connection.Setup button to input all the settings manually. To configure the IPv6 local settings, click on the IPv6.Local.Connectivity.Setup button. D-Link DIR-808L User Manual 62 Section 3 - Configuration IPv6 Internet Connection Setup Wizard On this page, you can configure the IPv6 connection type using the IPv6 Internet Connection Setup Wizard. Click the IPv6.Internet.Connection.Setup.Wizard button and the router will guide you through a few simple steps to get your network up and running. Click Next to continue to the next page. Click Cancel to discard the changes made and return to the main page. The router will try to detect whether it is possible to obtain the IPv6 Internet connection type automatically. If this succeeds, you will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-808L User Manual 63 Section 3 - Configuration However, if the automatic detection fails, you will be prompted to either Try.again.or to click on the Guide.me.through.the.IPv6.settings button to manually configure the IPv6 settings using the wizard. There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet service provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. The 3 options available on this page are IPv6.over.PPPoE, Static.IPv6.address.and.Route, and Tunneling. Connection. Choose the required IPv6 Internet connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-808L User Manual 64 Section 3 - Configuration IPv6 over PPPoE After selecting the IPv6.over.PPPoE option, you will be able to configure the IPv6 Internet connection that requires a username and password to access the Internet. Most DSL modems use this type of connection. The following parameters will be available for configuration:
PPPoE Session: Select the first option to share the configuration settings with those for IPv4 over PPPoE, or alternatively select the second option to configure a new session. User Name: Enter the PPPoE username used here. If you do not know your user name, please contact your ISP. Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here (optional). D-Link DIR-808L User Manual 65 Section 3 - Configuration Static IPv6 Address Connection This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, subnet prefix length, default gateway, primary DNS server, and secondary DNS server. Your ISP should provide you with this information. Use.Link-Local. Address:
The link-local address is used by nodes and routers when communicating with neighboring nodes on the same link. This mode enables IPv6-capable devices to communicate with each other on the LAN side. IPv6.Address:
Enter the WAN IPv6 address for the router here. Subnet.Prefix.Length:
Enter the WAN subnet prefix length value used here. Default.Gateway:
Enter the WAN default gateway IPv6 address used here. Primary.IPv6. DNS.Address:
Secondary.IPv6. DNS.Address:
LAN.IPv6.Address:
Enter the WAN primary DNS server address used here. Enter the WAN secondary DNS server address used here. These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The routers LAN IPv6 Address configuration is based on the IPv6 address and subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) D-Link DIR-808L User Manual 66 Section 3 - Configuration Tunneling Connection (6rd) After selecting the Tunneling.Connection.(6rd) option, you can configure the IPv6 6rd connection settings. The following parameters will be available for configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used here. IPv4 Address: Enter the IPv4 address used here. Mask Length: Enter the IPv4 mask length used here. Assigned IPv6 Prefix: Displays the IPv6 assigned prefix value here. 6rd Border Relay IPv4 Address:
Enter the 6rd border relay IPv4 address used here. IPv6 DNS Server: Enter the primary DNS server address used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-808L User Manual 67 Section 3 - Configuration Manual IPv6 Local Connectivity Settings This option can be used to manually configure IPv6 settings for local connectivity. These settings are used only on the local network, and will not be used to access the Internet. Enable ULA:
Click here to enable Unique Local IPv6 Unicast Addresses settings. Use Default ULA Prefix:
Checking this box will automatically configure the ULA prefix for the default setting. ULA Prefix:
If you wish to choose your own ULA prefix, enter it here. Current IPv6 ULA Settings:
This section with display the current settings for your IPv6 ULA. D-Link DIR-808L User Manual 68 Section 3 - Configuration IPv6 Manual Setup There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE, IPv6 in IPv4 tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Select Auto.Detection to have the router detect and automatically configure your IPv6 setting from your ISP. Auto Detection D-Link DIR-808L User Manual 69 Section 3 - Configuration Static IPv6 My IPv6 Connection:
Select Static.IPv6 from the drop-down menu. Use Link-Local Address:
Tick this box to use the link-local address as the IPv6 address. IPv6 Address:
If you did no tick the box above, enter the IPv6 address provided to you by your Internet Service Provider (ISP). Subnet Prefix Length:
Enter the subnet prefix length specified by your ISP. Default Gateway:
Enter the default gateway provided by your ISP. Primary DNS Server:
Enter the primary DNS server provided by your ISP. Secondary DNS Server:
Enter the secondary DNS server provided by your ISP. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Displays the Routers LAN Link-Local Address. Enable Automatic IPv6 address assignment:
Tick to enable the automatic assignment of IPv6 addresses to computers on your network. Autoconfiguration Type:
Select Stateful.(DHCPv6), SLAAC.+.RDNSS, or SLAAC.+. Stateless.DHCPv6. IPv6 Address Range Start:
If you selected Stateful (DHCPv6) above, enter the start IPv6 address for the DHCPv6 range for your local computers. IPv6 Address Range End:
If you selected Stateful (DHCPv6) above, enter the end IPv6 address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:
Enter the IPv6 address lifetime (in minutes). D-Link DIR-808L User Manual 70 Section 3 - Configuration Autoconfiguration My.IPv6.Connection:
Select Autoconfiguration.(SLAAC/DHCPv6) from the drop-
down menu. IPv6.DNS.Settings:
Select either Obtain.DNS.server.address.automatically or Use.the.following.DNS.Address. Primary/Secondary. DNS.Address:
Enter the primary and secondary DNS server addresses. Enable.DHCP-PD:
Tick to enable DHCP-PD. LAN.IPv6.Address:
Enter the LAN (local) IPv6 address for the router. LAN.IPv6.. Link-Local.Address:
Displays the routers LAN Link-Local Address. Enable.Automatic.IPv6. address.assignment:
Tick to enable the automatic assignment of IPv6 addresses to computers on your network. Autoconfiguration. Type:
Select Stateful.(DHCPv6), SLAAC.+.RDNSS, or SLAAC.+. Stateless.DHCPv6. IPv6.Address. Range.Start:
If you selected Stateful (DHCPv6) above, enter the start IPv6 address for the DHCPv6 range for your local computers. IPv6.Address. Range.End:
If you selected Stateful (DHCPv6) above, enter the end IPv6 address for the DHCPv6 range for your local computers. IPv6.Address.Lifetime:
Enter the IPv6 address Lifetime (in minutes). D-Link DIR-808L User Manual 71 Section 3 - Configuration PPPoE My.IPv6.Connection:
Select PPPoE from the drop-down menu. PPPoE.Session:
Enter the PPPoE account settings supplied by your Internet provider (ISP). Address.Mode:
Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP.Address:
Enter the IP address (Static PPPoE only). Username:
Enter your PPPoE user name. Password:
Enter your PPPoE password and then verify the password in the next box. Service.Name:
Enter the ISP service name (optional). Reconnection.Mode:
Select either Always-on, On-Demand, or Manual. Maximum.Idle.Time:. Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable auto-reconnect. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. IPv6.DNS.Settings:
Select either Obtain.DNS.server.address.automatically or Use.the.following.DNS.Address. Primary/Secondary. DNS.Address:
Enter the primary and secondary DNS server addresses. Enable.DHCP-PD:
Tick to enable DHCP-PD. LAN.IPv6.Address:
LAN IPv6 Link-Local Address:
Enter the LAN (local) IPv6 address for the router. Displays the routers LAN Link-Local Address. D-Link DIR-808L User Manual 72 Section 3 - Configuration Enable.Automatic.IPv6. address.assignment:
Tick to enable the automatic assignment of IPv6 addresses to computers on your network. Autoconfiguration. Type:
Select Stateful.(DHCPv6), SLAAC.+.RDNSS, or SLAAC.+. Stateless.DHCPv6. IPv6.Address. Range.Start:
If you selected Stateful (DHCPv6) above, enter the start IPv6 address for the DHCPv6 range for your local computers. IPv6.Address. Range.End:
If you selected Stateful (DHCPv6) above, enter the end IPv6 address for the DHCPv6 range for your local computers. IPv6.Address.Lifetime:
Enter the IPv6 address lifetime (in minutes). D-Link DIR-808L User Manual 73 Section 3 - Configuration IPv6 in IPv4 Tunneling My.IPv6. Connection.is:
Select IPv6 in IPv4 Tunnel from the drop-down menu. IPv6.in.IPv4. Tunnel.Settings:
Enter the remote and local IPv4 and IPv6 settings supplied by your Internet Service Provider (ISP). IPv6.DNS.Settings:
LAN.IPv6.Address:
Select Obtain.a.DNS.server.address.automatically, or Use. the.following.IPv6.DNS.servers. If you chose to use IPv6 DNS servers, enter the primary and secondary DNS server addresses provided to you by your ISP. Enable.DHCP-PD:
Tick to enable DHCP-PD. LAN.IPv6.Address Enter the LAN (local) IPv6 address for the router. LAN.IPv6.Link-
Local.Address:
Enable.Automatic. IPv6.address. assignment:
Displays the routers LAN Link-Local Address. Tick to enable the automatic assignment of IPv6 addresses to computers on your network. Autoconfiguration. Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6. IPv6.Address. Range.Start:
If you selected Stateful (DHCPv6) above, enter the start IPv6 address for the DHCPv6 range for your local computers. IPv6.Address. Range.End:
If you selected Stateful (DHCPv6) above, enter the end IPv6 address for the DHCPv6 range for your local computers. IPv6.Address. Lifetime:
Enter the router advertisement lifetime (in minutes). D-Link DIR-808L User Manual 74 Section 3 - Configuration 6 to 4 Tunneling My.IPv6. Connection:
Select 6.to.4 from the drop-down menu. 6.to.6.Address Displays the 6 to 4 address of the router. 6.to.4.Relay:
Enter the 6 to 4 relay address provided by your Internet Service Provider (ISP). Primary/Secondary. DNS.Address:
Enter the primary and secondary DNS server addresses provided by your ISP. LAN.IPv6.Address:
Enter the LAN (local) IPv6 address for the router. LAN.IPv6.Link-
Local.Address:
Enable.Automatic. IPv6.address. assignment:
Displays the routers LAN link-local address. Tick to enable the automatic assignment of IPv6 addresses to computers on your network. Autoconfiguration. Type:
Select Stateful.(DHCPv6), SLAAC.+.RDNSS, or SLAAC.+. Stateless.DHCPv6. IPv6.Address. Range.Start:
If you selected Stateful (DHCPv6) above, enter the start IPv6 address for the DHCPv6 range for your local computers. IPv6.Address. Range.End:
If you selected Stateful (DHCPv6) above, enter the end IPv6 address for the DHCPv6 range for your local computers. IPv6.Address. Lifetime:
Enter the IPv6 address lifetime (in minutes). D-Link DIR-808L User Manual 75 Section 3 - Configuration 6rd My.IPv6. Connection:
Enable.Hub.and. Spoke.Mode:
6rd.Configuration:
Select 6rd from the drop-down menu. Tick to enable hub and spoke mode. Select either 6rd.DHCPv4.Option or Manual.Configuration. If you select manual, there will be additional fields available for configuration. 6rd.IPv6.Prefix:
Enter the 6rd IPv6 prefix provided by your Internet Service Provider (ISP) IPv4.Address/
Mask.Length:
Displays the IPv4 address. Enter the mask length provided by your ISP. Assigned. IPv6.Prefix:
6rd.Border.Relay. IPv4.Address:
Primary.IPv6. DNS.Server:
Displays the assigned IPv6 prefix. Enter the 6rd border relay IPv4 address provided by your ISP. Enter the primary IPv6 DNS server address provided by your ISP. Secondary.IPv6. DNS.Server:
Enter the secondary IPv6 DNS server address provided by your ISP. LAN.IPv6.Address:
Enter the LAN (local) IPv6 address for the router. LAN.IPv6.Link-
Local.Address:
Enable.Automatic. IPv6.address. assignemtn:
Displays the routers LAN Link-Local Address. Tick to enable the automatic assignment of IPv6 addresses to computers on your network. D-Link DIR-808L User Manual 76 Section 3 - Configuration Autoconfiguration. Type:
Select Stateful. (DHCPv6), SLAAC+RDNSS, or SLAAC. +. Stateless.DHCPv6. IPv6.Address. Range.Start:
If you selected Stateful (DHCPv6) above, enter the start IPv6 address for the DHCPv6 range for your local computers. IPv6.Address. Range.End:
If you selected Stateful (DHCPv6) above, enter the end IPv6 address for the DHCPv6 range for your local computers. IPv6.Address.. Lifetime:
Enter the router advertisement lifetime (in minutes). D-Link DIR-808L User Manual 77 Section 3 - Configuration Link-Local Connectivity My IPv6 Connection:
Select Link-Local.Only.from the drop-down menu. LAN IPv6 Address Settings:
Displays the IPv6 address of the router. D-Link DIR-808L User Manual 78 mydlinkTM Settings The DIR-808L features a new cloud service that pushes information such as firmware upgrade notifications, user activity, and intrusion alerts to the mydlink app on your Android or iOS mobile device. To ensure that your router is up to date with the latest features, mydlink will notify you when an update is available for your router. You can also monitor users online activity with real-time website browsing history, maintaining a safe and secure environment, especially useful for monitoring your childrens Internet usage at home. On this page you can configure the mydlink settings for this router. This feature will allow you to use the mydlink cloud services, which include online access and management of this router through the mydlink portal website or the mydlink Lite app for iOS and Android mobile devices. In the mydlink section, you can view the registration status of the mydlink account service. The mydlink.Service field will either display Registered or Non-Registered. In the Register.mydlink.Service section, you can register or modify a mydlink account. Click on the Register.mydlink.Service button to initiate this procedure. After clicking the Register.mydlink.Service button, this window will appear. Register mydlink Service Wizard: Step 1 In this section you can select one of two options. Select the Yes,.I.have.a.mydlink.account option if you already have a mydlink account that you want to use on this router. Select the No,.I.want.to.register.and.login.with.a.new.mydlink. account option to register a new account and use it on this router. Click the Next button to proceed to the next step. Click the Cancel.button to discard the changes made and return to the main page. D-Link DIR-808L User Manual 79 Register mydlink Service Wizard: Step 2 When registering a new.account, the following page appears. The following parameters will be available for configuration:
E-mail Address (Account Name):
Enter your e-mail address here. This e-mail address will also become your account name. Password: Enter your preferred password here. Confirm Password: Re-enter your preferred password here. Last Name: Enter your last name here. First Name: Enter your first name here. Accept terms and conditions:
Tick this option to accept the mydlink terms and conditions. Click the Next button to proceed to the next step. Click the Prev button to return to the previous step. Click the Cancel button to discard the changes made and return to the main page. When logging in with an existing account, the following page appears. The following parameters will be available for configuration:
E-mail Address
(Account Name):
Enter your e-mail address here. This e-mail address that you used to register with the mydlink service. Password: Enter your mydlink password here. Click the Login button to login using these account details. Click the Prev button to return to the previous step. Click the Cancel button to discard the changes made and return to the main page. D-Link DIR-808L User Manual 80 At any point during this wizard, you can change the preferred language. To change the language, select the desired language option from the Language drop-down menu, found on the top right of this page. End of Wizard D-Link DIR-808L User Manual 81 Section 3 - Configuration Advanced Virtual Server This will allow you to open a single port. If you would like to open a range of ports, refer to the next page. Tick the box next to each tule to enable that rule. Name:
Enter a name for the rule or select an application from the drop-
down menu. Select an application and click << to populate the fields. IP.Address:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. Private.Port/
Public.Port:
Enter the port that you want to under Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol.Type:
Select TCP, UDP, or Both.from the drop-down menu. Schedule:
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound.Filter:
Select Allow.All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced.>. Inbound Filter page. D-Link DIR-808L User Manual 82 Section 3 - Configuration Port Forwarding This will allow you to open a single port or a range of ports. Tick the box next to each rule to enable that rule. Name:
Enter a name for the rule or select an application from the drop-
down menu. Select an application and click << to populate the fields. IP.Address:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), your computer will be listed in the Computer Name drop-
down menu. Select your computer and click <<. TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma. Example: 24,1009,3000-4000 Schedule:
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound.Filter:
Select Allow.All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced >
Inbound.Filter page. D-Link DIR-808L User Manual 83 Section 3 - Configuration Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special application rules allow some of these applications to work with the DIR-808L. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger.Port field, select the protocol type as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic. The DIR-808L provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it. Name:
Enter a name for the rule. You may select a pre-defined application from the drop-down menu and click <<. Trigger:
This is the port used to trigger the application. It can be either a single port or a range of ports. Traffic.Type:
Select the protocol of the trigger port (TCP, UDP, or Both). Firewall:
This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic.Type:
Select the protocol of the firewall port (TCP, UDP, or Both). Schedule:
The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-808L User Manual 84 Section 3 - Configuration QoS Engine The QoS Engine option helps improve your network performance by prioritizing applications. By default the QoS Engine set-
tings are disabled and application priority is not classified automatically. The QoS section contains a queuing mechanism, traffic shaping, and classification. It supports two kinds of queuing mechanisms: Strict Priority Queue (SPQ) and Weighted Fair Queue (WFQ). SPQ will process traffic based on traffic priority; queue 1 has the highest priority and queue 4 has the lowest priority. WFQ will process traffic based on the queue weight; you can configure each queues weight, where the sum of all the queues weights must be 100. When surfing the Internet, the system will do traffic shaping based on the uplink and downlink speed. The classification rules can be used to classify traffic to different queues, then SPQ or WFQ will do QoS based on the queues priority or weight. The following parameters will be available for configuration:
Enable QoS: This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. Automatic Uplink Speed:
Tick this option to have the QoS engine automatically set your uplink speed. Measured Uplink Speed:
Manual Uplink Speed:
Displays the uplink speed measured by the router. This section allows you to specify the speed at which data can be transferred from the ISP to the router. This is determined by your ISP. ISPs often define speed as a download/upload pair. For example, 1.5 Mbits/284 Kbits. D-Link DIR-808L User Manual 85 Section 3 - Configuration After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of traffic control and data priority manipulation. The following parameters will be available for configuration:
Checkbox: Tick this option to enable the rule specified. Name: Enter a custom name for the rule being created here. This name is used for identification. Priority: Select the appropriate priority requirement by entering a value between 1 and 255 in the box provided. Protocol: Select the protocol used for the application for in the drop-
down menu and it will automatically place it in the Protocol field. Local IP Range: Enter the local IP range used here. This is the IP range of your Local Area Network. The routers IP cannot be included in this range. Remote IP Range: Enter the remote IP range used here. This is the IP range of the public network from the Internet port side. To apply this rule to any IP addresses from the public side, enter the range 0.0.0.1 to 255.255.255.254. Local Port Range: Enter the local port range to be used for this rule. Remote Port Range: Enter the remote port range to be used for this rule. Click on the Save.Settings button to accept the changes made. Click on the Dont.Save.Settings button to discard the changes made. D-Link DIR-808L User Manual 86 Section 3 - Configuration Network Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the broadband router. Configure MAC Filtering:
MAC Address:
Select.Turn.MAC.Filtering.Off, Allow.MAC.addresses.listed. below, or Deny.MAC.addresses.listed.below from the drop-
down menu. Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client:
Select a DHCP client from the drop-down menu and click << to copy that MAC address. Clear:
Click the Clear button to clear the MAC address and DHCP client list fields for each line. D-Link DIR-808L User Manual 87 Section 3 - Configuration Access Control The Access Control section allows you to control access in and out of your network. Use this feature as a parental control to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Enable Access Control:
Tick the box to enable access control. Any policies specified will be enabled. Add Policy:
Click the Add.Policy button to start the Access Control Wizard. Access Control Wizard Click Next to continue with the wizard. D-Link DIR-808L User Manual 88 Section 3 - Configuration Enter a name for the policy and then click Next to continue. Select a schedule (eg: Always) from the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. Address.Type - Select IP address, MAC address, or Other Machines. IP.Address - Enter the IP address of the computer you want to apply the rule to. Machine.Address - Enter the PC MAC address (i.e. 00:00.00.00.00). Select the filtering method. If you choose Block.Some.Access, there will be two filtering options available:
Apply.Web.Filter - This will enable the website filtering rules selected in the Advanced >> Website Filter section. Apply.Advanced.Port.Filters - This will enable the port filtering rules, which will be specified on the subsequent page. Click Next to continue. D-Link DIR-808L User Manual 89 Section 3 - Configuration Enter the rule:
Enable - Tick to enable the rule. Name - Enter a name for your rule. Dest IP Start - Enter the starting IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. Click Save to continue. To enable web logging, click Enable. Click Save to save the access control rule. Your newly created policy will now show up under Policy.Table. D-Link DIR-808L User Manual 90 Section 3 - Configuration Website Filters Website filters are used to allow you to control access to websites by users connected to the network. To use this feature select to Allow or Deny, enter the domain or website and click Save.Settings. You must also select Apply.Web.Filter under the Access Control section in order to activate this filter. Add Website Filtering Rule:
Select either DENY computers access to ONLY these sites or ALLOW computers access to ONLY these sites. Website URL/
Domain:
Enter the keywords or URLs that you want to allow or block. Click Save.Settings. Clear the list below:
Click this button to clear the list of filtered websites. D-Link DIR-808L User Manual 91 Section 3 - Configuration Inbound Filters The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound filters can be used with virtual server, port forwarding, or remote administration features. Name:
Enter a name for the inbound filter rule. Action:
Select Allow or Deny. Enable:
Check to enable rule. Remote IP Start:
Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range. Remote IP End:
Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range. Add:
Click the Add button to apply your settings. You must click Save.Settings.at the top to save the settings. Inbound Filter Rules List:
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DIR-808L User Manual 92 Section 3 - Configuration Firewall Settings The DIR-808L offers a firewall which helps protect your network from external threats. The SPI feature helps prevent malicious attacks by inspecting and verifying incoming data packets. In certain cases, you may also want a computer exposed to the outside world for certain types of applications. The firewall setup also features a Demilitarized Zone (DMZ) option, which will expose the selected clients completely to the outside world. Enable SPI:
SPI (Stateful Packet Inspection, also known as Dynamic Packet Filtering) helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session conforms to the protocol. Anti-Spoof Check:
Enable this feature to protect your network from certain kinds of spoofing attacks. Enable DMZ:
Tick the box to enable to DMZ feature. DMZ IP Address:
Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the Setup > Network. Settings page so that the IP address of the DMZ machine does not change. PPTP:
Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol. IPSEC (VPN):
Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. D-Link DIR-808L User Manual 93 Section 3 - Configuration RTSP:
Allows applications that use Real Time Streaming Protocol to receive streaming media from the Internet. QuickTime and Real Player are some of the common applications using this protocol. SIP:
Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. D-Link DIR-808L User Manual 94 Section 3 - Configuration Routing The Routing option is an advanced method of customizing specific routes of data through your network. Name:
Enter a name for your route. Destination IP:
Enter the IP address of packets that will take this route. Netmask:
Enter the netmask of the route, please note that the octets must match your destination IP address. Gateway:
Enter your next hop gateway to be taken if this route is used. Metric:
The route metric is a value from 1 to 15 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface:
Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-808L User Manual 95 Section 3 - Configuration Advanced Wireless Transmit Power:
Set the transmit power of the antennas. WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires this. WMM Enable:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. HT 20/40 Coexistence:
Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40 MHz and there is another wireless networks channel over-lapping and causing interference, the router will automatically change to 20 MHz. D-Link DIR-808L User Manual 96 Section 3 - Configuration Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the Initial setup as well as the Add New Device processes. The Wi-Fi Alliance has certified WPS across different products as well as manufacturers. The process as simple as pressing a button for the Push Button Method or correctly entering an 8-digit code for the Pin Code Method. WPS significantly reduces the amount of time required to set up a secure wireless network, while maintaining the highest level of wireless security provided by the WPA2 standard. Enable:
Enable the Wi-Fi Protected Setup feature. Lock WPS-PIN Setup:
PIN Settings:
Note: if this option is unchecked, the WPS button on the side of the router will be disabled. Tick this option to lock the use of the WPS-PIN setup feature. A PIN is a unique number that can be used to add the router to an existing network or to create a new network. Only the Administrator (admin account) can change or reset the PIN. Current PIN:
Shows the current PIN. Reset PIN to Default:
Generate New PIN:
Restore the default PIN of the router. Create a random number that is a valid PIN. This becomes the routers PIN. You can then copy this PIN to the user interface of the wireless client. D-Link DIR-808L User Manual 97 Section 3 - Configuration Add Wireless Device Wizard:
Click this button to begin the WPS wizard, which will guide you through the process of adding a wireless device to your network using WPS. Click to start the wizard and refer to Wi-Fi Protected Setup Wizard on page 43. WPS Button You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to Connect a Wireless Client to your Router on page 122 for more information. D-Link DIR-808L User Manual 98 WPS Button Section 3 - Configuration Advanced Network Settings Enable.UPnP:
To use the Universal Plug and Play (UPnP) feature, click on Enable UPnP. UPnP provides compatibility with networking equipment, software and peripherals. Enable.WAN. Ping.Respond:
Checking the box will allow the DIR-808L to respond to pings, which may be required by some ISPs. If not required, unchecking the box may provide some extra security from outside intruders. WAN.Ping. Inbound.Filter:
Choose whether to Allow.All or Deny.All WAN pings according to the inbound filter rules determined under the Inbound Filters section. Details:
Displays the state of the WAN ping inbound filter. WAN.Port.Speed:
You may set the port speed of the Internet port to 10.Mbps, 100.Mbps, or Auto (recommended). Enable.IPV4. Multicast.Streams:
Check the box to allow multicast traffic to pass through the router from the Internet (IPv4). Enable.IPV6. Multicast.Streams:
Check the box to allow multicast traffic to pass through the router from the Internet (IPv6). D-Link DIR-808L User Manual 99 Section 3 - Configuration Guest Zone The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network, and will allow only Internet access to any clients that are connected. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. Enable.Guest. Zone:
Schedule:
Check to enable the Guest Zone feature. The schedule of time when the guest zone will be active. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section or click Add New. Wireless.Band:
Wireless Indicates whether the settings are for the 2.4.GHz or 5.GHz band. Network.Name:
Enter a wireless network name (SSID) that is different from your main wireless network. Enable.Routing. Between.Zones:
Check to allow network connectivity between the different zones created. Security.Mode:
Select the type of security or encryption you would like to enable for the guest zone. D-Link DIR-808L User Manual 100 Section 3 - Configuration IPv6 Firewall The DIR-808Ls IPv6 firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The DIR-808Ls IPv6 firewall functions in a similar way to the IP Filters feature. Enable.IPv6. Ingress.Filtering:
Enable.IPv6. Simple.Security:
Configure.IPv6. Firewall:
Tick the box to enable ingress filtering protection for IPv6. Check the box to enable the IPv6 firewall simple security. Select an action from the drop-down menu. Name:
Enter a name to identify the IPv6 firewall rule. Schedule:
Use the drop-down menu to select the time schedule that the IPv6 firewall rule will be enabled on. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools >
Schedules section. Interface.(Source):
Use the drop-down menu to specify the interface that connects to the source IPv6 addresses of the firewall rule. IP.Address.Range.
(Source):
Enter the source IPv6 address range in the adjacent IP.Address. Range field. .Protocol:
Select the protocol of the firewall port (All, TCP, UDP, or ICMP). Interface.(Dest):
Use the drop-down menu to specify the interface that connects to the destination IP addresses of the firewall rule. IP.Address. Range.(Dest):
Enter the destination IPv6 address range in the adjacent IP. Address.Range field. Port.Range:
Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second box. D-Link DIR-808L User Manual 101 Section 3 - Configuration IPv6 Routing This page allows you to specify custom routes that determine how data is moved around your network. Checkbox:
Tick the box next to the route you wish to enable. Name:
Enter a specific name to identify this route. Destination.IP/
Prefix.Length:
This is the IP address of the router used to reach the specified destination or enter the IPv6 address prefix length of the packets that will take this route. Metric:
Enter the metric value for this rule here. Interface:
Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the router. Gateway:
Enter the next hop that will be taken if this route is used. D-Link DIR-808L User Manual 102 Section 3 - Configuration Tools Admin This page will allow you to change the Administrator password. You can also enable remote management and specify the settings for the remote management feature. Admin. Password:
Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Gateway.name:
Enter a name for your router. Enable. Graphical. Authentication:
Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your routers network settings. Enable.HTTPS. Server:
Check to enable HTTPS to connect to the router securely. This means to connect to the router, you must enter https://192.168.0.1 (for example) instead of http://192.168.0.1. Enable.Remote. Management:
Remote. Admin.Port:
Remote management allows the DIR-808L to be configured from the Internet by a web browser. A username/password is still required to access the web management interface. The port number used to access the DIR-808L is used in the URL. Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-808L and 8080 is the port used for the D-Link DIR-808L User Manual 103 Section 3 - Configuration Remote.Admin. Inbound.Filter:
Web Management interface. If you have enabled HTTPS.Server, you must enter https:// as part of the URL to access the router remotely. This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. Details will display the current status. D-Link DIR-808L User Manual 104 Section 3 - Configuration Time The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the time server. Daylight Saving can also be configured to automatically adjust the time when needed. Current.Router. Time:
Time.Zone:
Enable.Daylight. Saving:
Displays the current date and time of the router. Select your time zone from the drop-down menu. To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. Enable.NTP. Server:
NTP is short for Network Time Protocol. A NTP server will synchronize the time and date with your router. This will only connect to a server on the Internet, not a local server. Check the box to enable this feature. NTP.Server.Used:
Enter the IP address of a NTP server or select one from the drop-down menu. Date.and.Time:
To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set.Time. Note: You can also click Copy.Your.Computers.Time.Settings to sync the date and time with the computer you are currently on. D-Link DIR-808L User Manual 105 Section 3 - Configuration SysLog The DIR-808L keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. Enable.Logging. to.SysLog.Server:
SysLog.Server. IP.Address:
Check this box to send the router logs to a SysLog server. The address of the SysLog server that will be used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DIR-808L User Manual 106 Section 3 - Configuration Email Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. Enable.Email. Notification:. When this option is enabled, router activity logs are emailed to a designated email address. From.Email. Address:
This email address will appear as the sender when you receive a log file or firmware upgrade notification via email. To.Email.Address:
Enter the email address where you want the email sent. SMTP.Server. Address:
Enter the SMTP server address for sending email. SMTP.Server.Port:
Enter the SMTP port used on the server. Enable. Authentication:
Check this box if your SMTP server requires authentication. Account.Name:
Enter your account for sending email. Password:
Enter the password associated with the account. Re-type the password associated with the account. On.Log.Full:
When this option is selected, logs will be sent via email to your account when the log is full. On.Schedule:
Selecting this option will send the logs via email according to schedule. Schedule:
This option is enabled when On.Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule, go to Tools.>.Schedules. Details:
Lists the details of the current schedule. D-Link DIR-808L User Manual 107 Section 3 - Configuration System Settings This section allows you to manage the routers configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that youve created. Save.Settings. to.Local.Hard. Drive:
Use this option to save the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Save button. A file dialog will appear, allowing you to select a location and file name for the settings. Load.Settings. from.Local. Hard.Drive:
Use this option to load previously saved router configuration settings. First, use the Browse option to find a previously saved file of configuration settings. Then, click the Load button to transfer those settings to the router. Restore.to. Factory.Default. Settings:
. This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save. Configuration button above. Reboot.Device:
Click to reboot the router. D-Link DIR-808L User Manual 108 Section 3 - Configuration Firmware Update You can upgrade the firmware of the router here. Make sure the firmware you want to use is on the local hard drive of the computer. Please check the D-Link support website for firmware updates at http://support.dlink.com. You can download firmware upgrades to your computer from this site. Browse: After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. You can change the language of the web UI by uploading available language packs. Language Pack Browse:
After you have downloaded the new language pack, click Browse to locate the language pack file on your hard drive. Click Upload to complete the language pack upgrade. D-Link DIR-808L User Manual 109 Section 3 - Configuration Dynamic DNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have purchased
(www.yourdomainname.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, anyone wanting to access your server can enter your domain name to connect to your server no matter what your IP address is. Enable. Dynamic.DNS:
Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP address. Check the box to enable DDNS. Server. Address:
Select your DDNS provider from the drop-down menu or enter the DDNS server address. Host.Name:
Enter the host name that you registered with your DDNS service provider. Username. or.Key:
Password. or.Key:
Enter the username or key for your DDNS account. Enter the password or key for your DDNS account. Timeout:
Enter a timeout time (in hours). Status:
Displays the current connection status. D-Link DIR-808L User Manual 110 Section 3 - Configuration System Check Ping.Test:
The Ping Test is used to send ping packets to test if a computer is on the Internet. Enter the IP address that you wish to ping and click Ping. IPv6.Ping.Test:
Enter the IPv6 address that you wish to ping and click Ping. Ping.Results:
The results of your ping attempts will be displayed here. D-Link DIR-808L User Manual 111 Section 3 - Configuration Schedules Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a start time of 3pm and end time of 8pm. Name:
Enter a name for your new schedule. Days:
All.Week to include every day, or choose Select to specify a day, or multiple days. All.Day.-.24. Hours:
. Time.Format:
Check All.Day.-.24hrs to have the schedule on 24-hours per day. Select 12-hour or 24-hour as the time format. Start.Time:
Enter the starting time for the schedule each day. End.Time:
Enter the end time for the schedule each day Save.Settings:
You must click Save.Settings at the top for your schedules to go into effect. Schedule. Rules.List:
The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DIR-808L User Manual 112 Section 3 - Configuration Status Device Info This page displays the current information for the DIR-808L. It will display the LAN, WAN (Internet), and wireless information. If your Internet connection is set up for a Dynamic IP address, then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection. General:
Displays the routers time and firmware version. WAN:
Displays the MAC address and the public IP settings LAN:
Displays the MAC address and the private (local) IP settings for the router. Wireless.LAN:
Displays the 2.4 GHz wireless MAC address and your wireless settings such as SSID and channel. Wireless.LAN2:
Displays the 5 GHz wireless MAC address and your wireless settings such as SSID and channel. LAN.Computers:
Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). IGMP.Multicast. Memberships:
Shows details of current multicast connections. D-Link DIR-808L User Manual 113 Section 3 - Configuration Logs The router automatically logs (records) events of possible interest in its internal memory. If there isnt enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. Log.Options:
You can select the types of messages that you want to display from the log. System Activity, Debug Information, Attacks, Dropped Packets, and Notice messages can be selected. Click Apply.Log.Settings.Now to activate your settings. Refresh:
Updates the log details on the screen so it displays any recent activity. First.Page:
Click to go to the first page. Last.Page:
Click to go to the last page. Previous:
Click to go back one page. Next:
Click to go to the next page. Clear:
Clears all of the log contents. Email.Now:
This option will send a copy of the router log to your email address configured in the Tools > Email.Settings screen. Save.Log:
This option will save the router log to a file on your computer. D-Link DIR-808L User Manual 114 Section 3 - Configuration Statistics The screen below displays the Traffic.Statistics. Here you can view the amount of packets that pass through the DIR-808L on both the WAN and LAN ports, and the wireless segments. The traffic counter will reset if the device is rebooted. D-Link DIR-808L User Manual 115 Section 3 - Configuration Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. For further information regarding the information in this table, please refer to the relevant article in the Support section of the user interface. D-Link DIR-808L User Manual 116 Section 3 - Configuration Routing This page will display your current routing table. This information will also reflect any routing settings configured in the Routing section of the setup. D-Link DIR-808L User Manual 117 Section 3 - Configuration Wireless The wireless client table displays a list of currently connected wireless clients. This table displays the MAC address of the connected wireless clients, as well as client IP address, wireless mode, connection rate, and signal strength for each client. D-Link DIR-808L User Manual 118 Section 3 - Configuration IPv6 The IPv6 page displays a summary of the routers IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. D-Link DIR-808L User Manual 119 Section 3 - Configuration This page displays the IPV6 routing details configured for your router. IPV6 Routing D-Link DIR-808L User Manual 120 Section 3 - Configuration Support D-Link DIR-808L User Manual 121 Section 4 - Security Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-808L router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step.1 - Press the WPS button on the DIR-808L for about 1 second. The power LED on the front will start to blink. WPS Button Step.2 - Within 120 seconds, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step.3 - Allow up to 1 minute for the configuration process to complete. Once the power light stops blinking, you will be connected and your wireless connection will be secured with WPA2. D-Link DIR-808L User Manual 122 Section 4 - Security Windows 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-808L User Manual 123 Section 4 - Security You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected.will appear next to the name of the network to which you are connected. D-Link DIR-808L User Manual 124 Section 4 - Security Windows 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-808L User Manual 125 Section 4 - Security 3. Highlight the wireless connection with the Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking. Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-808L User Manual 126 Section 4 - Security 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-808L User Manual 127 Section 4 - Security WPS The WPS feature of the DIR-808L can be configured using Windows 7. Carry out the following steps to use Windows 7 to configure the WPS feature:
1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-808L User Manual 128 Section 4 - Security 3. Double-click the DIR-808L. 4. Input the WPS PIN number (displayed in the WPS box on the routers label, or in the Setup.> Wireless.Setup menu in the Routers Web UI) and click Next. D-Link DIR-808L User Manual 129 Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-808L User Manual 130 Section 4 - Security 7. The following window appears while the router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-808L User Manual 131 Section 5 - Connecting to a Wireless Network Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect.to.a.network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/
IP settings for your wireless adapter. Refer to the Networking.Basics. section in this manual for more information. D-Link DIR-808L User Manual 132 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1.. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect.to.a.network. 2.. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-808L User Manual 133 Section 5 - Connecting to a Wireless Network 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-808L User Manual 134 Section 5 - Connecting to a Wireless Network WPS/WCN 2.0 The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The following instructions for setting this up depends on whether you are using Windows Vista to configure the router or any third party software. When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vistas built-in support for WCN 2.0, use software provided by a third party, or configure manually. If you are running Windows Vista, log into the router and click the Enable checkbox in the Basic > Wireless section. You can use the Current PIN that is displayed on the Advanced > Wi-Fi.Protected.Setup section, click the Generate.New.PIN button, or Reset.PIN.to.Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-808L User Manual 135 Section 5 - Connecting to a Wireless Network Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using a third party utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless.Networks.Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View.Available.Wireless.Networks. The utility will display any available wireless networks in your area. Click on a Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/
IP settings for your wireless adapter. Refer to the Networking.Basics section in this manual for more information. D-Link DIR-808L User Manual 136 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View.Available.Wireless.Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DIR-808L User Manual 137 Section 5 - Connecting to a Wireless Network 3. The Wireless.Network.Connection box will appear. Enter the WPA-PSK Wi-Fi password and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DIR-808L User Manual 138 Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-808L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, any screenshots on your computer may appear different to the following examples. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in on a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer 7 and higher
- Mozilla Firefox 3.5 and higher
- Google Chrome 8 and higher
- Apple Safari 4 and higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-808L User Manual 139 Section 6 - Troubleshooting Configure your Internet settings:
Go to Start > Settings > Control.Panel. Double-click the Internet.Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never.Dial.a.Connection. Click the LAN.Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and re-open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DIR-808L User Manual 140 Section 6 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows NT, 2000, XP, Vista, 7, and 8 users type in cmd and press Enter.(or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:
. ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472 You should start at 1472 and work your way down by 10 each time. Once you D-Link DIR-808L User Manual 141 Section 6 - Troubleshooting get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router, follow the steps below:
Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (blank if you have not changed the default setting). Click OK to enter the web configuration page for the device. Click on Setup and then click Manual.Configure. To change the MTU, enter the number in the MTU field and click Save.Settings to save your settings. Test the site that you were trying to visit. If changing the MTU has not resolved the problem, continue changing the MTU in increments of ten. D-Link DIR-808L User Manual 142 Appendix A - Wireless Basics Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless router. Ad-Hoc Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-808L User Manual 143 Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-808L User Manual 144 Appendix B - Networking Basics If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Assign a Static IP address Step.1 Windows 7 -
Windows Vista - Click on Start.>.Control.Panel.>.Network.and.Internet.>.Network.and.Sharing.Center.>.Manage.Network Click on Start.>.Control.Panel.>.Network.and.Internet.>.Network.and.Sharing.Center. Windows XP -
Windows 2000 - From the desktop, right-click My.Network.Places.>.Properties. Connections. Click on Start.>.Control.Panel.>.Network.Connections. Step.2 Right-click on the Local.Area.Connection which represents your network adapter and select Properties. Step.3 Highlight Internet.Protocol.(TCP/IP) and click Properties. Step.4 Click Use.the.following.IP.address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the default gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set the primary DNS the same as the LAN IP address of your router (192.168.0.1). The secondary DNS is not required, however you may be required to enter a DNS server by your ISP. Step.5 Click OK twice to save your settings. D-Link DIR-808L User Manual 145 Appendix C - Technical Specifications Technical Specifications LAN Interface: Four 10/100 Mbps LAN ports Hardware Specifications WAN Interface: One 10/100 Mbps Internet port Wireless Interface (2.4 Ghz): IEEE 802.11b/g/n Wireless Interface (5 Ghz): IEEE 802.11a/n/ac Temperature Operating: 0 to 40 C (32 to 104 F) Storage: -20 to 65 C (-4 to 149 F) Humidity Operating: 10% - 90% non-condensing Non-Operating: 5% - 95% non-condensing Wireless Frequency Range*
2.412 GHz ~ 2.483.5 GHz (802.11b/g/n) 5.15 GHz ~ 5.825 GHz (802.11a/n/ac) Wireless Bandwidth Rate IEEE 802.11n: 6.5 to 150 Mbps IEEE 802.11ac: 6.5 to 433 Mbps Antenna Type Internal Antenna Wireless Security 64/128-bit WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise, WPS
(PIN & PBC) Certifications FCC, CE, C-Tick. Wi-Fi Certified IPv6 Certified CCC Dimensions & Weight 156.5 x 113.2 x 53.6 mm (6.16 x 4.46 x 2.11 inches) 184.7 grams (0.41 lbs)
* Wireless frequency range may vary depending on region D-Link DIR-808L User Manual 146
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Federal.Communication.Commission.Interference.Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Important.Note:
FCC.Radiation.Exposure.Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. D-Link DIR-808L User Manual 147 Industry.Canada.statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution.:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation.Exposure.Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration.dexposition.aux.radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DIR-808L User Manual 148
1 2 | Label Sample | ID Label/Location Info | 386.08 KiB | May 06 2013 |
R=2mm 29.5mm 99.5mm DIR-808L Default router settings :
http://dlinkrouter.local. Username : Admin Password : (leave the field blank) FCC ID : KA2IR808LA1 IC : 4216A-IR808LA1 Model : DIR-808LA1 30mmx24mm 12V 1A CAN ICES-3 (B)/NMB-3(B) Made in China.(C)
1 2 | Attestation (Channel and Mode Declaration) | Attestation Statements | 69.25 KiB | May 06 2013 |
cr}
No.289, Sinhu 3 Rd., Neihu District, Taipei City 114, Taiwan, R.O.C TEL:+886-2-6600-0123 FRX:+886-2-5550-9988 Declaration for no non-US channel operation A hte May 30, 2013 We, D-Link Corporation declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: KA2IR808LA1
---lf-you-should-have-any- question(s): regarding this declaration, please dont hesitate-to contact.us. Thank you!
Shinglin Chung / Associate Vice President Tel: +886-2-6600-0123#5819 Fax: +886-2-5550-9988 E-mail: shinglinchung@dlink.com.tw
1 2 | Confidentiality Request | Cover Letter(s) | 104.35 KiB | May 06 2013 |
No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114 Taiwan (R.O.C) Tel: +886-2-6600-0123; Fax: +886-2-5550-9988 Date: 2013-05-30 FCC ID: KA2IR808LAI1 To the attention of _ Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Schematics _ Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, DQ Name: Shinglin Chung Title: Associate Vice President Company name: D-Link Corporation Tel.: +886-2-6600-0123#5819 Fax: +886-2-5550-8489 -
E-mail: shinglinchung@dlink.com.tw
1 2 | Cover Letter (Agent Authorization) rev | Cover Letter(s) | 122.30 KiB | May 06 2013 |
No.289, Sinhu 3 Rad., Neihu District, Taipei City 114 Taiwan (R.O.C) Tel: +886-2-6600-0123; Fax: +886-2-5550-9988 Date: 2013-05-30 AUTHORIZATION LETTER. To whom it may concern:
We, the undersigned D-Link Corporation. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part C,E and any communication needed with the national authority. Any and all acts carried out by BV CPS _ Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don t hesitate to contact us. Thank you!
Sincerely yours, Shinglin Chung / Associate Vice President Company name: D-Link Corporation Tel.: +886-2-6600-0123#5819 Fax.: +886-2-5550-9988 E-mail: shinglinchung@dlink.com.tw
1 2 | Cover Letter (Contact Authorization) | Cover Letter(s) | 45.53 KiB | May 06 2013 |
D-Link No.289, Sinhu 3rd Ra., Neihu District, Taipei City 114, Tarwan, R.O.C September 24, 2008 Power of Attorney To whom it may concem:
|, the undersigned, Michael Boschma, hereby authorize the persons listed below to actin behalf of me to sign all related documents for D-Links FCC application. Wireless Shinglin Chung'Senior manager Broad Band Jacob LuolSenior Director
+886-2.6500012345819 +886-2-66000123#6810 shinglin_chung@link com tw jacob_luo@dlink com tw Digital home Robert LivSenior Director Switch & Henghsn Liaa/ASsocate Vive President
+4888-2-66000123#5720 secutty product +886-2-6600012385810 robert_in@link.com.tw hhenghsin_tiao@link com.tw Company Name: D-Link Co, Lid Fax. 886-2-55509988 Company Address: No.289,Sinhu 3 Rd, Neihu District, Taipei City 114, Taiwan, R.O.C. Authorization period: Jan 1, 2008 ~Dec 31", 2058 Should you have any question regarding this power of attorney, please don't hesitate to contact me. Sincerely 9-2b-08 Michael Bosehma D-Link Co. TEL: (714) 886-6000 FAX: (949) 272-4629 E-maiiMbeschma@dlink com
1 2 | Operational Description | Operational Description | 36.86 KiB | May 06 2013 |
FCC ID: KA2IR808LA1 Operational Description This device is a Wireless AC600 Dual Band Cloud Router which operates in both of 2.4GHz and 5GHz bands; the maximum data rate could be up to 433.3Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 433.3Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 12Vdc from AC adapter. The antenna is Printed antenna with IPEX antenna connector. For more detailed instruction, please take a look at the users manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted. Report No.: RF130425C22
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-06-05 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2013-06-05
|
||||
1 2 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0007371172
|
||||
1 2 | Physical Address |
17595 Mt. Herrmann
|
||||
1 2 |
Fountain Valley, 92708
|
|||||
1 2 |
Fountain Valley, California 92708
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
KA2
|
||||
1 2 | Equipment Product Code |
IR808LA1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B**** A******
|
||||
1 2 | Title |
General Counsel
|
||||
1 2 | Telephone Number |
714-8********
|
||||
1 2 | Fax Number |
866-7********
|
||||
1 2 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless AC600 Dual Band Cloud Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. | ||||
1 2 | Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
R******** C********
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5180.00000000 | 5240.00000000 | 0.0480000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412 | 2462 | 0.869 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 5745 | 5825 | 0.282 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC