FCC ID: KA2IR615Z1 Wireless N300 Router

Clients List Clients list: Click the corresponding client(s) on this list to automatically add their information to the Static IP Addresses list. Refresh: Click here to refresh the connected clients list. Click OK to save changes or click the X in the upper right hand corner to cancel changes. Add/Static IP Addresses IP address: Specify the IP address you wish to reserve for the given client. MAC address: Specify the MAC address of the client for which the IP address is reserved. Hostname: Specify the Hostname of the client for which the IP address is reserved. Click OK to save changes or click the X in the upper right hand corner to cancel changes. 67 Section 4 - Configuration Functions Firewall IP Filter The IP Filters page manages LAN users' access to the Internet. It is possible to permit access to the Internet for specified IP addresses within your LAN or to restrict access for specified IP addresses. You can also define filters for port access. DIR-615 FW:1.0.0 The currently defined IP filters are displayed in the table. You may define up to 16 IP filtering rules. If you wish to remove a rule, click the corresponding check box to select it and then click Delete. If you wish to create a new rule, click the Add button. Filters Add: Click here to add a new filter to the firewall. For details, see IP Filter Create/Edit on page 69. Delete:

If you have a selected one or more filters, click this button to delete the selected filter(s). No:

Indicates the number of the filter. Name:

Indicates the name of the filter. State:

Indicates whether the is enabled or disabled. Action:

Indicates the action taken when the filter is triggered. IP version:

Indicate to which IP version the filter applies. 68 Section 4 - Configuration IP Filter Create/Edit Protocol:

Indicates to which protocol(s) the filter applies. Source IP address:

Indicates the IP address range and port(s) to which the filter applies. General Settings DIR-615 FW:1.0.0 Enable rule: Toggle this switch to enable the rule. Name: Specify a name for the rule. This name is for reference only and does not affect functionality. Action: Choose the action to be taken when the rule is triggered. Choose Allow or Deny. Protocol: Choose which protocol to which the rule will apply. Choose from TCP/

UDP, TCP, UDP, ICMP, or <All>

IP version: Choose if the rule should apply to IPv4 or IPv6. Destination IP Address Set as: Choose Range or single IP address to enter a specific IP address or ranges for the destination filter. Choose Subnet to specify a subnet only. Start/End IPv4/

IPv6 address:

If you have selected Range or single IP address, specify an IP address range for the destination filter. To enter a single address, use only the Start IPv4/IPv6 address field and leave the End IPv4/IPv6 address field blank. Subnet IPv4/IPv6 address:

If you have selected Subnet, specify the destination subnet to filter. 69 Section 4 - Configuration IP Filter Create/Edit (cont) Source IP Address Set as: Choose Range or single IP address to enter a specific IP address or ranges for the source filter. Choose Subnet to specify a subnet only. DIR-615 FW:1.0.0 Start/End IPv4/

IPv6 address:

If you have selected Range or single IP address, specify an IP address range for the source filter. To specify a single address, use only the Start IPv4/IPv6 address field and leave the End IPv4/IPv6 address field blank. If you have selected Subnet, enter the source subnet to filter. Subnet IPv4/IPv6 address:

Ports Set source port manually:

Source port:

Destination port: Specify the destination port or ports to which the filter will apply. Specify multiple ports by separating them with commas. Specify port ranges by separating the beginning and end of the range with a colon. Toggle this switch to specify source ports to which the filter will apply. If Set source port manually has been enabled, specify the source port to which the filter will apply. Specify multiple ports by separating them with commas. Specify port ranges by separating the beginning and end of the range with a colon. Click Apply when you are done. 70 Section 4 - Configuration This Demilitarized Zone (DMZ) feature directly exposes the client to the Internet, and is not recommended in ordinary situations. DIR-615 FW:1.0.0 DMZ Enable: Toggle this switch to enable the DMZ feature. Enable NAT Loopback:

Toggle this switch to enable NAT Loopback. NAT Loopback allows LAN devices to connect directly to the DMZ host by using the WAN IP address IP Address:

If DMZ is enabled, specify the IP address of the DMZ host. Click Apply when you are done. 71 Section 4 - Configuration MAC Filter The MAC filter is used to restrict or allow certain types of Ethernet Frames through the gateway based on their source or destination MAC address. These filters are helpful in securing or restricting traffic on your local network. DIR-615 FW:1.0.0 The currently defined MAC filters are displayed in the table. You may define up to 32 MAC filtering rules. If you wish to remove a rule, click the corresponding check box to select it and then click Delete. If you wish to create a new rule, click the Add button. Default Mode: Select Allow to allow all traffic except from MAC addresses in the List of exceptions with the Deny action. Select Deny to allow all traffic except from MAC addresses in the List of exceptions with the Allow action. List of exceptions Add: Click here to add a new filter to the firewall. For details, see Add Rule on page 73. Delete:

If you have a selected one or more filters, click this button to delete the selected filter(s). No:

If DMZ is enabled, specify the IP address of the DMZ host. Status:

Indicates the number of the filter. Action:

Indicates the action taken when the filter is triggered. MAC address:

Indicates the MAC address to which the filter applies. Hostname:

Indicates the hostname of the device to which the filter applies. 72 Section 4 - Configuration MAC Filter (cont) Add Rule Allow/Deny: Choose the action to be taken when the rule is triggered. Choose MAC address: Specify the MAC address of the host to which the filter will apply. This Hostname: Specify the hostname of the host to which the filter will apply. This Allow or Deny. field is mandatory. field is optional. Click Save when you are done, or click the X to cancel. 73 Section 4 - Configuration The website filter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked). DIR-615 FW:1.0.0 Web Site Filter URL Filter Addresses Clients Enable: Toggle this switch to enable or disable web filtering. Address Filtering: Choose from the drop down list whether you want to Block Listed URLS or Block all URLs except listed. Add: Click on the Add button to add a new URL to the URL list. In the pop up window, specify a URL or keyword you want to filter. Choose from drop down list matching template options. Delete: To delete an existing entry, click the checkbox corresponding to the entry you want to delete, then click on the Delete button. Client filtering: Choose from the drop down list whether you want to filter Devices from list or All but devices from list. Add: Click on the Add button to add a new client to the list of clients. In the pop up window, specify a hostname for the client and its MAC address. Delete: To delete an existing entry, click the checkbox corresponding to the entry you want to delete, then click on the Delete button. Click Apply when you are done. 74 Section 4 - Configuration DoS (Denial of Service) protection can help protect the router against certain kinds of DoS attacks. Note that this filter is not complete protection, and should be used in tandem with other tools for maximum protection. DIR-615 FW:1.0.0 DoS Protection URL Filter Per Source IP Flood Other Settings Enable: Toggle this switch to enable or disable the DoS Protection feature. Toggle specific IP flood sources to filter. Some of these settings have subtypes. Toggle specific attack types to filter. Click Apply when you are done. 75 Section 4 - Configuration Wi-Fi Client management The Client Management page displays a list of currently connected Wi-Fi devices. You can view detailed information about these devices or force them to disconnect from your network. DIR-615 FW:1.0.0 List of Wi-Fi Clients Refresh: Click here to refresh the connected clients list. Disconnect: Click here to disconnect the selected client(s) from your network. Note that this only disconnects the client, it does not prevent the client from reconnecting. DIR-615 FW:1.0.0 Hostname:

Indicates the hostname of the connected client. MAC address:

Indicates the MAC address of the connected client. Band:

Indicates the band over which the client is connected. Network name

(SSID):

Indicates the SSID to which the client is connected. Signal Level:

Indicates signal strength as a percentage. Online:

Indicates the time online in minutes. Last TX rate:

Indicates the last recorded transmission rate in Mbps. Rx/Tx:

Indicates total bytes received or transmitted this session. Power Saving Mode:

Indicates the power saving status of the client. 76 Section 4 - Configuration The Wi-Fi Protected Setup page allows you to create a wireless connection between your router and a device automatically by simply pushing a button. DIR-615 FW:1.0.0 WPS WPS Control Information Network name

(SSID):

Network authentication:

Enable/Disable: Click this button to toggle WPS. For security reasons, WPS is disabled by default. Establish connection:

Click this button to launch the Establish Connection menu, described below. DIR-615 FW:1.0.0 WPS state: Shows whether it is configured or not. Indicates the SSID to which the client is connected. Indicates the type of authentication used on the network. Encryption:

Indicates the encryption used by the authentication method. Password PSK:

Indicates the password of the network. Update: Click this button to refresh the page. Reset to Unconfigured:

Click here to clear WPS configuration data. 77 Section 4 - Configuration WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for improving the quality of video and voice applications on your wireless network. DIR-615 FW:1.0.0 WMM Wi-Fi Multimedia Work mode: Select Auto, Manual, or Disabled. The default and recommended setting is Auto. If you select Manual, you will be prompted for detailed configuration. This setting is intended for advanced users only and is not recommended for most users. Access Point/Station DIR-615 FW:1.0.0 If Work mode has been set to Manual, you can click on each row to configure advanced QoS settings for that connection type. 78 Section 4 - Configuration Client Client mode allows you to configure your router as a client on another wireless network. This would be useful to setup the router as a wireless repeater or connect to a WISP. DIR-615 FW:1.0.0 Broadcast wireless network 2.4:

Connecting to network:

Enable: Toggle this switch to enable your router to act as a Wi-Fi client. Toggle these switches to enable or disable your router's wireless APs. Choose Select network from list or Connect to hidden network. If you choose Select network from list, select the network you wish to connect to and enter any necessary security information as prompted. If you choose Connect to hidden network, enter the Wi-Fi information below. 79 Section 4 - Configuration Client (cont) If you selected Connect to hidden network:

Frequency band: Select the frequency band used by the hidden network. This must be specified correctly to connect. Network name

(SSID):

Specify the network name used by the hidden network. This must be specified correctly to connect. BSSID: Specify the BSSID Network authentication:

Select the network authentication used by the hidden network. This must be specified correctly to connect. Password PSK: Specify the password or PSK used by the hidden network. This must be specified correctly to connect. Click Apply when you are done. 80 Section 4 - Configuration Client Shaping Client shaping allows you to impose speed limits on clients to ensure that bandwidth is not being monopolized by a single Wi-Fi client. DIR-615 FW:1.0.0 Client Shaping Add: Click this button to add a new client shaping rule. You will be taken to the Add Rule dialogue, described below. Delete: Click this button to delete the selected rule(s). MAC address:

Indicates the MAC address of the Wi-Fi client to which the rule applies. Maximum upload rate:

Indicates the maximum upload rate for the given client in megabits per second. Maximum download rate:

Indicates the maximum download rate for the given client in megabits per second. Enabled:

Indicates if the rule is enabled. Add/Edit Rule Upload/Download Enabled: Toggle this switch to enable the rule MAC address: Specify the MAC address of the Wi-Fi client to which the rule will apply. 81 Section 4 - Configuration Client Shaping (cont) Not limited: Toggle this switch to disable the limit for the corresponding transfer DIR-615 FW:1.0.0 type. Maximum rate:

If Not limited is disabled, specify a maximum transfer rate in megabits per second. Click Save when you are done. 82 Section 4 - Configuration Additional The additional screen allows you to configure details of your router's Wi-Fi settings. These are advanced settings and should not be needed for normal usage. Bandwidth: Specify the channel bandwidth. Choose from 20 MHz and 20/40 MHz Autonegotiation 20/40

(Coexistence):

Toggle to enable or disable. (For 2.4 Ghz configuration only) TX Power (in percent):

Specify the routers transmission power in percentage. Choose from 300, 100, 75, 50, 25, 10 B/G Protection: 802.11b and 802.11g protection function is used to minimize collisions between devices of your wireless network. Choose from Auto, Always On, Always Off. Method of channel auto select:

Specify the method of channel auto select. Choose from BSS(by signal level) and FA & CCA (by volume of data transmitted). Short GI: Choose from Enable or Disable Drop multicast: Toggle to enable or disable. Adaptivity mode: Toggle to enable or disable. 83 Section 4 - Configuration Additional (cont) Beacon Period (in milliseconds):

Specify the time interval (in milliseconds) between packets sent to synchronize the wireless network. The default setting is 100ms. RTS threshold (in bytes):

Specify the minimum size (in bites) of a packet for which an RTS frame is transmitted. The default size is 2347 bytes and the standard range is 256-2346 bytes. Frag threshold (in bytes):

Specify in bytes the maximum frame size for a non-fragmented packet. The default size is 2346. DTIM period (in beacon frames):

Specify how often (by the number of beacon frames) that DTIM is transmitted. By default this is set to 1. Station Keep Alive

(in seconds):

Specify the time interval (in seconds) between keep alive checks of wireless devices from your WLAN. 84 Section 4 - Configuration MAC Filter On the Wi-Fi/MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define a set of MAC addresses of devices which will not be allowed to access the WLAN. DIR-615 FW:1.0.0 To Enable or Disable MAC Filter for a specific SSID, click on the SSID name listed below each Wi-Fi band. Enable MAC Filter:

MAC filter restrict mode:

Toggle this switch to enable MAC filter. When this option is acti-

vated, you can create rules for filtering by MAC addresses Choose either allow or deny to enable/disable connection only for specified MAC addresses. To add a rule, click on the add button. Frequency Band: Choose which frequency band you want the rule to apply to. SSID: Choose which SSID you want the rule to apply to. MAC Address: Specify the MAC address of the device. Hostname: Specify hostname of the device (optional). Enable Rule Toggle this switch to enable or disable the rule. 85 Section 4 - Configuration Once a filter has been defined, page will display the list of filters below. To edit a filter, click directly on the corresponding row. DIR-615/DIR-612 FW:1.0.0 MAC Filter (cont) MAC Address: MAC address of device Hostname: Hostname of device SSID: Name of wireless network Band: Frequency band Enabled: Current status of filter To delete a filter, select the corresponding check box then click on the delete symbol. D-Link DIR-615/DIR-612 User Manual 86 Section 4 - Configuration Advanced UPnP IGD UPnP IGD (Universal Plug and Play Internet Gateway Device) is a protocol that allows ports to automatically be mapped between your devices behind your NAT and the Internet. DIR-615/DIR-612 FW:1.0.0 Enable: Toggle this switch to enable or disable UPnP. If it is enabled, a table will appear indicating active UPnP connections. IPv4 IGD Protocol:

Indicates the protocol used by the UPnP connection. IP:

Indicates the internal IP used by the UPnP connection. Private Port:

Indicates the internal port used by the used by the UPnP connection. Public port:

Indicates the port exposed to the internet used by the UPnP connection. Description:

Indicates the description of the protocol used by the UPnP connection. D-Link DIR-615/DIR-612 User Manual 87 Section 4 - Configuration Remote Access Remote access allows you to access the web GUI from WAN. By default, the access from external networks to the router is disabled for security reasons. If you need to allow access to the router from external networks, create relevant rules. DIR-615/DIR-612 FW:1.0.0 Remote Access Add: Click here to add a new rule, described below. DIR-615/DIR-612 FW:1.0.0 Delete: Click here to delete a selected rule. IP address:

Indicates the IP address permitted to access the GUI. Mask:

Indicates the subnet mask of the IP address permitted to access the GUI. Public Port:

Indicates the public port over which the IP address is permitted to access the GUI. Protocol:

Indicates the protocol used to access the GUI. Add Rule Open access: Toggle this switch to enable any remote host to access the GUI. This is not recommended. IP address: Specify the IP address of the remote host allowed to access the GUI. Mask: Specify the subnet mask of the remote host allowed to access the GUI. D-Link DIR-615/DIR-612 User Manual 88 Section 4 - Configuration Remote Access (cont) Public Port: Specify the port over which the remote host will access the GUI. Protocol: Choose HTTP, HTTPS, or TELNET as the protocol for remote access. Click Save when you are done. D-Link DIR-615/DIR-612 User Manual 89 Section 4 - Configuration Virtual Servers allows you to redirect incoming Internet traffic to a specified IP address in the local area network. DIR-615/DIR-612 FW:1.0.0 Virtual Servers Click on ADD to create a new virtual server and specify the below parameters. General Settings Name: Specify a name for the virtual server. Template: Choose a template for the virtual server to pre-populate some fields, or choose Custom to configure all fields manually. Interface: Select an interface from the drop-down menu, or select <All>

Protocol: Select a protocol from the drop-down menu to which the rule will apply. Public Network Settings Remote IP Remote IP: Specify the remote IP to which the rule will apply. Add Remote IP: Click this button to add additional remote IP fields. Public port (start/

end):

Specify a start and an end port to which the rule will apply. If you wish to specify a single port, specify a start port only. D-Link DIR-615/DIR-612 User Manual 90 Section 4 - Configuration DIR-615/DIR-612 FW:1.0.0 Private Network Settings Private IP: Specify the IP address on your local network to which the rule will forward. Private Port (start/

end):

Specify a start and an end port to which the rule will apply. If you wish to specify a single port, specify a start port only. Click Apply when you are done. D-Link DIR-615/DIR-612 User Manual 91 Section 4 - Configuration TR-069 Client On the TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS). The TR-069 client is used for remote monitoring and management of the device. DIR-615/DIR-612 FW:1.0.0 TR-069 Client Interface: Select the interface over which the client should operate. Enable TR-069 client:

Toggle this switch to enable or disable TR-069. Auto Configuration Server Settings URL address: Specify the URL of your ISP's ACS. Username: Specify the username for your ISP's ACS. Password: Specify the password for your ISP's ACS. Inform Settings Enable: Toggle this switch to enable active contact with your ISP's ACS. Interval: Specify the interval in seconds for each inform packet. Connection Request Settings Username: Specify the username here. D-Link DIR-615/DIR-612 User Manual 92 Section 4 - Configuration Password: Specify the password here. DIR-615/DIR-612 FW:1.0.0 TR-069 Client (cont) Request Port: Specify the request port here. Request Path: Specify the request path here. Click Apply when you are done. D-Link DIR-615/DIR-612 User Manual 93 Section 4 - Configuration Once connected to the Internet, your router automatically builds routing tables that determine where traffic should be sent. Static routes can override this process, allowing traffic to be directed to a specific client or location. DIR-615 FW:1.0.0 Static Route Routing Configuration Add: Click this button to add a new static route. Delete: Click this button to delete the selected route(s). Destination network:

Indicates the IP address of the destination network. DIR-615 FW:1.0.0 Gateway:

Indicates the gateway traversed by the static route. Interface:

Indicates the interface traversed by the static route. Metric:

Indicates the metric of the static route. Accessibility:

Indicates the current status of the route. Add Route Protocol: Choose the protocol used by the static route. Interface: Choose the interface used by the static route. Specify the IP address of the destination. Specify the netmask used by the destination IP. Destination network:

Destination netmask:

D-Link DIR-615/DIR-612 User Manual 94 Section 4 - Configuration Static Route (cont) Gateway: Specify the gateway used by the static route. Metric: Specify a metric between 1 and 255. Click Save when you are done. D-Link DIR-615/DIR-612 User Manual 95 Section 4 - Configuration Dynamic DNS Dynamic Domain Name Service allows your router to associate an easy-to-

remember domain name such as [YourDomainName].com with the regularly changing IP address assigned by your Internet Service provider. This feature is helpful when running a virtual server. DIR-615 FW:1.0.0 DDNS List Add: Click this button to add a new DDNS service, described below. Delete: Click this button to deleted the selected DDNS service(s). Hostname:

Indicates the hostname of the DDNS service. DDNS service:

Indicates the name of the DDNS service. DIR-615 HW:Z1 FW:1.0.0 Username:

Indicates the username used with the DDNS service. Update period:

Indicates the update period in minutes of the DDNS service. Add DDNS Hostname: Specify the assigned hostname used by your DDNS service. DDNS service: Select the DDNS service you are using. Username: Specify the username for your DDNS service. Password: Specify the password for your DDNS service. Update period: Specify the update period in minutes. Click Save when you are done. D-Link DIR-615/DIR-612 User Manual 96 Section 4 - Configuration Bandwidth Control The Bandwidth Control page allows you to set bandwidth controls across the device's Ethernet ports. Click any port to change its bandwidth control settings. DIR-615 HW:Z1 FW:1.0.0 Bandwidth Control Port Port:

Indicates the port to which bandwidth controls can be applied. Maximum rate:

Indicates the maximum bandwidth allowed over the port in kbps. Enable: Toggle this switch to enable bandwidth control on the specified port. DIR-615 HW:Z1 FW:1.0.0 Maximum rate:

Indicates the maximum bandwidth allowed over the port in kbps. Click Save when you are done. D-Link DIR-615/DIR-612 User Manual 97 Section 4 - Configuration Ports Settings The Ports Settings page allows you to configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router. DIR-615 HW:Z1 FW:1.0.0 Ports Settings Port:

Indicates port number. Status:

Indicates current status of port. Autonegotiation:

Indicates whether autonegotiation is on/off. Speed:

Indicates port speed. Flow Control:

Indicates wether symmetric flow control is on/off. To configure a port, click on the corresponding port you wish to configure. Speed: Specify from drop down list port speed. Autonegotiation Modes:

Toggle this switch to enable/disable autonegotiation modes. Flow Control: Toggle this switch to enable/disable symmetric flow control. D-Link DIR-615/DIR-612 User Manual 98 Section 4 - Configuration The Redirect page allows to enable or disable notifications for when Internet connection has failed. DIR-615 HW:Z1 FW:1.0.0 Redirect Common Setting Enable Redirect: Toggle this switch to enable failure notifications in the browser window. Reasons for Redirect The below options will only appear if redirect is enabled. Physical Connection Error:

Toggle this switch to enable notification if connection failure is due to physical error. The Device is not Configured:

Toggle this switch to enable notification if connection failure due to device not configured. No Connection: Toggle this switch to enable notification if connection failure to due no connection detected. D-Link DIR-615/DIR-612 User Manual 99 Section 4 - Configuration IGMP The IGMP/MLD page allows you to enable/disable Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD). IGMP is used to managed multicast traffic for IPv4-based networks. MLD is used to manage multicast traffic in IPv6-based networks. DIR-615 HW:Z1 FW:1.0.0 IGMP Enable/Disable: Toggle this switch to enable/disable IGMP. IGMP version Choose from drop down list which IGMP version to use. Interface: Choose from drop down list which interface to apply to Enable/Disable: Toggle this switch to set the address of outgoing IGMP packets equal to 0.0.0.0 Click APPLY when finished. D-Link DIR-615/DIR-612 User Manual 100 Section 4 - Configuration ALG/Passthrough The ALG/Passthrough page allows you to configure the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec passthrough functions. Toggle this switch to enable/disable the following:

DIR-615 HW:Z1 FW:1.0.0 SIP RTSP High priority for IPTV High priority for service traffic High priority for service traffic High priority for Web interface and Telnet PPPoE passthrough IPsec passthrough L2TP passthrough PPTP passthrough Click APPLY when finished. D-Link DIR-615/DIR-612 User Manual 101 Section 4 - Configuration Management System Time System Time allows you to configure date and time to be synchronized with a public time server on the Internet or set manually. DIR-615 HW:Z1 FW:1.0.0 Enable/Disable: Toggle this switch to enable/disable NTP Daylight Saving time Get NTP server addresses using DHCP Run as a server for the local network. System Date: Displays device's current system date. System Time: Displays router's current system Time. NTP Servers Displays default public time server. Click on 'x' to delete. Click ADD SERVER to add a new public time server. Main time zone Determine Timezone Displays current time zone. To change time zone, choose from drop down list. D-Link DIR-615/DIR-612 User Manual 102 Section 4 - Configuration The System Log page displays diagnostic information that run in the background to monitor the health of your device if enabled. DIR-615 HW:Z1 FW:1.0.0 System Log Log Settings Refresh: Click to refresh log for new updates. Export: Click to export log as text file. Enable/Disable: Toggle this switch to enable/disable logging function. DIR-615 HW:Z1 FW:1.0.0 Type: Choose from drop down list type of diagnostics to log. Level: Choose from drop down list level of diagnostics to log. Click APPLY when finished. D-Link DIR-615/DIR-612 User Manual 103 Section 4 - Configuration The Administration page allows you to change router settings. DIR-615 HW:Z1 FW:1.0.0 Administration User Login: Username to login to router's configuration UI as the administrator. This cannot be changed. Password: Specify new password. Password needs to be between 1 - 31 ASCII characters. Confirm password again below. Click SAVE when finished. Language: Choose router UI language from drop down list. Factory: Click to reset router to factory default settings. Backup: Click to save current configuration to a file. Restore: Click to load previously saved configuration file to the device. Save: Click to save current settings. Reboot: Click to reboot device. Idle Time: Specify a period of inactivity (in minutes) after which the device will log you out. D-Link DIR-615/DIR-612 User Manual 104 Section 4 - Configuration The Telnet page allows you to enable or disable access to the device settings via TELNET from your LAN. DIR-615 HW:Z1 FW:1.0.0 Telnet Enable/Disable: Toggle this switch to enable Telnet. Port: Specify port number for telnet access. Click APPLY when finished. D-Link DIR-615/DIR-612 User Manual 105 Section 4 - Configuration Yandex.DNS Settings Built-in Yandex.DNS service protects against malicious and fraudulent web sites and helps to block access to adult content on children's devices. For more information, click About Yandex.DNS. DIR-615 HW:Z1 FW:1.0.0 Enable/Disable: Toggle this switch to enable Yandex.DNS. Default Mode: Toggle this switch to enable or disable different protection modes. DIR-615 HW:Z1 FW:1.0.0 Protection off: When selected, the DNS server has no restrictions on access to unsafe web sites. web sites. Safe: When selected, the service blocks access to malicious and fraudulent Child: When selected, the service blocks access to malicious and fraudulent web sites as well as access to adult content. The selected filtering mode will be applied to all devices newly connected to the router's network. Click APPLY when finished. D-Link DIR-615/DIR-612 User Manual 106 Section 4 - Configuration Devices and Rules Known Clients: Devices currently connected to the local network and their relavant filtering mode are displayed. IP address: This column indicates the IP address. MAC address: This column indicates the MAC address. Name: This column indicate the name. Rule: This column referes the the rule in place. Click on the rule to edit. Rules:

IP address: This column indicates the IP address. MAC address: This column indicates the MAC address. Name: This column indicate the name. Mode: This column indicate the mode. Click APPLY when finished. D-Link DIR-615/DIR-612 User Manual 107 Section 4 - Configuration Devices and Rules (cont) Create Rule:

To create a new filtering rule for a device, click the ADD button ( +) in the Rules section, or left-click the name of the filtering mode in the line of the device for which a rule should be created in the Known Clients section. MAC address: The MAC address of a device from the router's LAN. IP address: The IP address of a device from the router's LAN. To assign several fixed IP addresses to a device with a certain MAC address, click the ADD button, and in the line displayed, enter an IP address. A device of your LAN can have one IPv4 address and several IPv6 addresses. To remove the IP address, click the Delete icon ( ) in the line of the address. Name: Enter a name for the rule for easier identification. Optional. Mode: Select an operating mode of the Yandex.DNS service for this rule. Protection off: When this value is selected, the service provides the DNS server with no restrictions on access to unsafe web sites. Safe: When this value is selected, the service blocks access to malicious and fraudulent web sites. Child: When this value is selected, the service blocks access to malicious and fraudulent web sites and blocks access to adult content. After specifying the needed parameters, click the SAVE button. To edit a rule for filtering, select a relevant line of the table, in the opened window, change the needed values and click the SAVE button. To remove a rule for filtering, select the checkbox located to the left of the relevant rule and click the DELETE button ( ). Also you can remove a rule in the editing window. Click APPLY when finished. D-Link DIR-615/DIR-612 User Manual 108 Section 4 - Configuration Firmware Update The Firmware Update page allows you to upgrade firmware manually or you can configure the router to check for updates automatically. DIR-615 FW:1.0.0 Do not turn off the router before the firmware upgrade is completed. This may cause the device to break down. Choose File: Click to select firmware file to update. Click on Update Firmware when ready. Local Update Remote Update Remote Server URL:

Specify server address from which to update firmware. Enable/Disable: Toggle this switch to check for updates automatically. Click on CHECK FOR UPDATES to check for the latest firmware available from the remote server. Click on APPLY SETTINGS when finished. D-Link DIR-615/DIR-612 User Manual 109 Section 4 - Configuration Statistics Network Statistics Network Statistics provides you with various statistics about data transmitted and received through the Internet. DIR-615 FW:1.0.0 Network Statistics Name: Name of connection. IP - Gateway:

IP Address and Gateway. Rx/Tx: Receive and Transmit volume. Rx/Tx Errors Number of Rx/Tx errors. Duration Duration of connection. D-Link DIR-615/DIR-612 User Manual 110 Section 4 - Configuration The Port Statistics Page displays statics of traffic passing through the router by ports. DIR-615 FW:1.0.0 Port Statistics Port Statistics Port: Name of port. Status: Current status of port. Traffic sent Amount of traffic sent in Mbyte. Traffic received Amount of traffic received in Mbyte. D-Link DIR-615/DIR-612 User Manual 111 Section 4 - Configuration The Routing Table page displays information on routes. DIR-615 FW:1.0.0 Routing Table Routing Table Interface: Type of Interface. Destination: Destination network address. Gateway: Gateway address. Subnet Mask: Subnet Mask address. Flags: Displays whether a route is up, to a gateway, to a host, created by a redirect, or modified by a redirect. Metric: Displays cost of route. D-Link DIR-615/DIR-612 User Manual 112 Section 4 - Configuration The DHCP page displays information on computers that have received IP addresses from the DHCP of the router. DIR-615 FW:1.0.0 DHCP DHCP Hostname: Hostname of connected device IP Address:

IP address from connected device. MAC: MAC address of connected device. Expires:

IP address expiration date (lease time). D-Link DIR-615/DIR-612 User Manual 113 Section 4 - Configuration This page displays addresses and the interface of active multicast group to which the device is subscribed. DIR-615 FW:1.0.0 Multicast Groups IPv4 IPv6 IP Address:

IP address of active IPv4 multicast group. Interface:

Interface of active IPv4 mutlicast group. IP Address:

IP address of active IPv6 multicast group. Interface:

Interface of active IPv6 mutlicast group. D-Link DIR-615/DIR-612 User Manual 114 Section 4 - Configuration Diagnostics Ping The Ping page allows you to manually check availability of a host from the local or global network. DIR-615 FW:1.0.0 Host: Address of host. Count of Packets: Number of packets to send. IPv6: Toggle this switch to check through IPv6 protocol. MORE SETTINGS Packet Size: Number of data bytes to send. Wait Time: Time to wait for a response in seconds. Click OK to save or DEFAULT SETTINGS to reset back to default configuration. Click START to begin Ping Test or CLEAR to clear the results. D-Link DIR-615/DIR-612 User Manual 115 Section 4 - Configuration The Traceroute page allows you to determine the route of data transfer to a host. DIR-615 FW:1.0.0 Traceroute Host: Address of host. IPv6: Toggle this switch to check through IPv6 protocol. MORE SETTINGS Maximum TTL value:

Number of probes:

Maximum number of hops. Number of probe packets to a hope. Wait Time: Hope response time in seconds. Click OK to save or DEFAULT SETTINGS to reset back to default configuration. Click START to begin Traceroute or CLEAR to clear the results. D-Link DIR-615/DIR-612 User Manual 116 Section 4 - Configuration Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-615. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to these examples. 1. Why cant I access the web-based configuration utility?

When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:

Internet Explorer 10 or higher Firefox 44 or higher Safari 8 or higher Chrome 48 or higher Edge 20.10240 or higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable, or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-615/DIR-612 User Manual 117 Section 7 - Troubleshooting Configure your Internet settings:

Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?

If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the bottom panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait 60 seconds or more to access the router. The default IP address is 192.168.0.1. When you login, the wizard should start automatically. D-Link DIR-615/DIR-612 User Manual 118 Section 7 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?

If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and Once the window opens, youll need to do a special ping. Use the following syntax:

Click on Start and then click Run. press Enter (or click OK). ping [url] [-f] [-l] [MTU value]

Example: ping yahoo.com -f -l 1472 D-Link DIR-615/DIR-612 User Manual 119 Section 7 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with

(1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:

Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (previously specified. Click Login to enter the web configuration page for the device. In the Settings menu on the bar at the top of the page, click on Internet and then go to the WAN page. From there click on Edit and go to the All Settings tab. To change the MTU, enter the number in the MTU field and click Apply to save your settings. Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-615/DIR-612 User Manual 120 Section 7 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-615/DIR-612 User Manual 121 Appendix A - Wireless Basics What is Wireless?

Why D-Link Wireless?

How does wireless work?

Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networksl: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-615/DIR-612 User Manual 122 Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?

Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits Gives everyone at home broadband access Surf the web, check email, instant message, etc. Gets rid of the cables around the house Simple and easy to use Small Office and Home Office Uses/Benefits Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space D-Link DIR-615/DIR-612 User Manual 123 Appendix A - Wireless Basics Where is wireless used?

Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like:

airports, hotels, coffee shops, libraries, restaurants, and convention centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or access point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Security Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Dont let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. D-Link DIR-615/DIR-612 User Manual 124 Appendix A - Wireless Basics Wireless Modes There are basically two modes of networking:

Infrastructure All wireless clients will connect to an access point or wireless router. Ad-hoc Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-615/DIR-612 wireless network USB adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-615 User Manual 125 Appendix A - Wireless Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-615/DIR-612 User Manual 126 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step 1 Windows 10 - Click on Start > Windows System > Control Panel > Network and Internet > Network and Sharing Center. Windows 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows XP - Click on Start > Control Panel > Network Connections. Windows 2000 - From the desktop, right-click My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-615/DIR-612 User Manual 127 Appendix B - Networking Basics This section will show you the different levels of security you can use to protect your data from intruders. The DIR-615/DIR-612 offers the following types of security:

WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK (Pre-Shared Key) WPA-PSK (Pre-Shared Key) Wireless Security What is WPA?

WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:

Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-615/DIR-612 User Manual 128 Appendix B - Networking Basics Technical Specifications Temperature Operating: 0 to 40 C (32 to 104 F) Storage: -20 to 65 C (-4 to 149 F) Humidity Operating: 10% to 90% maximum, non-condensing Storage: 5% to 95% maximum, non-condensing Certifications FCC CE Dimensions & Weight L x W x H: 158 x 131.35 x 35.75 mm 152 grams Device Interfaces Wireless Interface (2.4 GHz): IEEE 802.11n/g/b Four 10/100 Mbps LAN ports One 10/100 Mbps WAN port Antenna Types Two external antennas Standards IEEE 802.11n IEEE 802.11g IEEE 802.3 IEEE 802.3u Security WPATM - Personal/Enterprise WPA2TM - Personal/Enterprise Wi-Fi Protected Setup (WPS) Power Input: 100 to 240 V AC, 50/60 Hz 5 V / 1A 1 Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors,including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DIR-615/DIR-612 User Manual 129 Appendix C - Technical Specifications Regulatory Statements This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. ErP Power Usage Network Standby: 0 watts Switched Off: 0 watts Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Non-modifications Statement:

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.

Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. D-Link DIR-615/DIR-612 User Manual 130 Appendix D - Regulatory Information This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. Note IMPORTANT NOTICE:

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. D-Link DIR-615/DIR-612 User Manual 131 Appendix D - Regulatory Information Frequency Band(s) Frequenzband Frquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) Max. Output Power (EIRP) Max. Output Power Consommation dnergie max. Potencia mxima de Salida Potenza max. Output Max. Output Power 2.4 G 2.4 2.4835 GHz 100 mW D-Link DIR-615/DIR-612 User Manual 132 Appendix D - Regulatory Information esky [Czech]

Dansk [Danish]

Deutsch [German]

Eesti [Estonian]

English Espaol [Spanish]

[Greek]

Franais [French]

Italiano [Italian]

European Community Declaration of Conformity:

Tmto D-Link Corporation prohlauje, e tento produkt, jeho psluenstv a software jsou v souladu se smrnic 2014/53/EU. Cel text ES prohlen o shod vydanho EU a o firmwaru produktu lze sthnout na strnkch k produktu www.dlink.com. D-Link Corporation erklrer herved, at dette produkt, tilbehr og software er i overensstemmelse med direktiv 2014/53/EU. Den fulde tekst i EU-overensstemmelseserklringen og produktfirmware kan wnloades fra produktsiden hos www.dlink.com. Hiermit erklrt die D-Link Corporation, dass dieses Produkt, das Zubehr und die Software der Richtlinie 2014/53/

EU entsprechen. Der vollstndige Text der Konformittserklrung der Europischen Gemeinschaft sowie die Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur Verfgung. Kesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on koosklas direktiiviga 2014/53/EL. Euroopa Liidu vastavusdeklaratsiooni tistekst ja toote psivara on allalaadimiseks saadaval tootelehel www.dlink. com. Hereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive 2014/53/EU. The full text of the EU Declaration of Conformity and product firmware are available for download from the product page at www.dlink.com Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas 2014/53/UE. El texto completo de la declaracin de conformidad de la UE y el firmware del producto estn disponibles y se pueden descargar desde la pgina del producto en www.dlink.com.

, D-Link Corporation , 2014/53/. www.dlink. com. Par les prsentes, D-Link Corporation dclare que ce produit, ces accessoires et ce logiciel sont conformes aux directives 2014/53/UE.Le texte complet de la dclaration de conformit de l'UE et le icroprogramme du produit sont disponibles au tlchargement sur la page des produits www.dlink.com. Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link DIR-615/DIR-612 User Manual 133 Appendix D - Regulatory Information Latviski [Latvian]

Lietuvi [Lithuanian]

Nederlands [Dutch]

Malti [Maltese]

Magyar [Hungarian]

Polski [Polish]

Ar o uzmums D-Link Corporation apliecina, ka is produkts, piederumi un programmatra atbilst direktvai 2014/53/ES. ES atbilstbas deklarcijas pilno tekstu un produkta apartprogrammatru var lejupieldt attiecg produkta lap vietn www.dlink.com. iuo dokumentu D-Link Corporation pareikia, kad is gaminys, priedai ir programin ranga atitinka direktyv 2014/53/ES. Vis ES atitikties deklaracijos tekst ir gaminio programin aparatin rang galima atsisisti i gaminio puslapio adresu www.dlink.com. Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/

EU. De volledige tekst van de EU conformiteitsverklaring en productfirmware is beschikbaar voor download van de productpagina op www.dlink.com. Bil-preenti, D-Link Corporation tiddikjara li dan il-prodott, l-aessorji, u s-software huma konformi mad-Direttiva 2014/53/UE. Tista tniel it-test si tad-dikjarazzjoni ta konformit tal-UE u l-firmware tal-prodott mill-pana tal-

prodott fuq www.dlink.com. Ezennel a D-Link Corporation kijelenti, hogy a jelen termk, annak tartozkai s szoftvere megfelelnek a 2014/53/

EU sz. rendeletek rendelkezseinek. Az EU Megfelelsgi nyilatkozat teljes szvege s a termk firmware a termk oldalrl tlthet le a www.dlink.com cmen. D-Link Corporation niniejszym owiadcza, e ten produkt, akcesoria oraz oprogramowanie s zgodne z dyrektywami 2014/53/EU. Peen tekst deklaracji zgodnoci UE oraz oprogramowanie sprztowe do produktu mona pobra na stronie produktu w witrynie www.dlink.com. Portugus [Portuguese]

Desta forma, a D-Link Corporation declara que este produto, os acessrios e o software esto em conformidade com a diretiva 2014/53/UE. O texto completo da declarao de conformidade da UE e do firmware Slovensko[Slovenian]

Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za prenos na strani izdelka na www.dlink.com. Slovensky [Slovak]

Suomi [Finnish]

Spolonos D-Link tmto vyhlasuje, e tento produkt, prsluenstvo a softvr s v slade so smernicou 214/53/

E. pln znenie vyhlsenia E o zhode a firmvri produktu s k dispozcii na prevzatie zo strnky produktu www. dlink.com. D-Link Corporation tten vakuuttaa, ett tm tuote, lisvarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Tydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com. D-Link DIR-615/DIR-612 User Manual 134 Appendix D - Regulatory Information Svenska[Swedish]

slenska [Icelandic]

Norsk [Norwegian]

D-Link Corporation frskrar hrmed att denna produkt, tillbehr och programvara verensstmmer med direktiv 2014/53/EU. Hela texten med EU-frskran om verensstmmelse och produkt-firmware kan hmtas frn produktsidan p www.dlink.com. Hr me lsir D-Link Corporation v yfir a essi vara, fylgihlutir og hugbnaur eru samrmi vi tilskipun 2014/53/EB. Skja m ESB-samrmisyfirlsinguna heild sinni og fastbna vrunnar af vefsu vrunnar www. dlink.com. Herved erklrer D-Link Corporation at dette produktet, tilbehret og programvaren er i samsvar med direktivet 2014/53/EU. Den fullstendige teksten i EU-erklring om samsvar og produktets fastvare er tilgjengelig for nedlasting fra produktsiden p www.dlink.com. Warning Statement:

The power outlet should be near the device and easily accessible. D-Link DIR-615/DIR-612 User Manual 135 Appendix D - Regulatory Information NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY):

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, and CY. Usage Notes:

To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed. Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz wireless. HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPISCHEN GEMEINSCHAFT ( NUR FR EIN DRAHTLOSES PRODUKT ) Bei diesem Gert handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Lndern - ausgenommen Frankreich. Der Betrieb dieses Gerts ist in den folgenden Lndern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebrauchshinweise:

Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und Kanalbeschrnkungen, dem jeweiligen Land, in dem das Gert zum Einsatz kommt, entsprechend, auf die Produkte angewandt. Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gert eine 2,4 GHz Verbindung nutzt. D-Link DIR-615/DIR-612 User Manual 136 Appendix D - Regulatory Information AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUT EUROPENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) Cet appareil est un systme de transmission large bande (metteur-rcepteur) de 2,4 GHz, destin tre utilis dans tous les tats-

membres de l'UE et les pays de l'AELE. Cet quipement peut tre utilis dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notes d'utilisation:

Pour rester en conformit avec la rglementation nationale europenne en matire d'utilisation du spectre, des limites de frquence et de canal seront appliques aux produits selon le pays o l'quipement sera dploy. Merci de vous rfrer au guide d'utilisation ou de la fiche technique afin de vrifier si votre produit utilise 2.4 GHz sans fil. AVISO DE USO DE LA LAN DE RADIO INALMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO INALMBRICO) Este dispositivo es un sistema de transmisin (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros de la UE y en los pases de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notas de uso:

Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarn limitaciones de frecuencia y canal en los productos en funcin del pas en el que se pondr en funcionamiento el equipo. Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalmbricas de 2.4 GHz. D-Link DIR-615/DIR-612 User Manual 137 Appendix D - Regulatory Information AVVISO PER LUSO DI LAN RADIO WIRELESS NELLA COMUNIT EUROPEA (SOLO PER PRODOTTI WIRELESS) Questo dispositivo pu essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Note per luso Al fine di mantenere la conformit alle normative nazionali europee per luso dello spettro di frequenze, saranno applicate limitazioni sulle frequenze e sui canali per il prodotto in conformit alle normative del paese in cui il dispositivo viene utilizzato. Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz. KENNISGEVING VAN DRAADLOOS RADIO LAN-GEBRUIK IN DE EUROPESE GEMEENSCHAP (ALLEEN VOOR DRAADLOOS PRODUCT) Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebruiksaanwijzingen:

Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast op de producten volgens het land waar de uitrusting gebruikt zal worden. Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz . D-Link DIR-615/DIR-612 User Manual 138 Appendix D - Regulatory Information SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. Do not spill food or liquid on your product and never push any objects into the openings of your product. Do not use this product near water, areas with high humidity, or condensation unless the product is specifically rated for outdoor application. Always unplug the product from mains power before cleaning and use a dry lint free cloth only. Keep the product away from radiators and other heat sources. SICHERHEITSVORSCHRIFTEN Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewhrleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts. Weitere Details finden Sie in den Benutzeranleitungen zum Produkt. Statische Elektrizitt kann elektronischen Komponenten schaden. Um Schden durch statische Aufladung zu vermeiden, leiten Sie elektrostatische Ladungen von Ihrem Krper ab,

(z. B. durch Berhren eines geerdeten blanken Metallteils), bevor Sie das Produkt berhren. Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Fr einige Produkte mit austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen. Vermeiden Sie, dass Speisen oder Flssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstnde in die Gehuseschlitze oder

-ffnungen Ihres Produkts. Verwenden Sie dieses Produkt nicht in unmittelbarer Nhe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation, es sei denn, es ist speziell zur Nutzung in Auenbereichen vorgesehen und eingestuft. Halten Sie das Produkt von Heizkrpern und anderen Quellen fern, die Wrme erzeugen. Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschlielich ein trockenes fusselfreies Tuch. D-Link DIR-615/DIR-612 User Manual 139 Appendix D - Regulatory Information CONSIGNES DE SCURIT Les consignes gnrales de scurit ci-aprs sont fournies afin dassurer votre scurit personnelle et de protger le produit dventuels dommages. Veuillez consulter les consignes dutilisation du produit pour plus de dtails. Llectricit statique peut endommager les composants lectroniques. Dchargez llectricit statique de votre corps (en touchant un objet en mtal reli la terre par exemple) avant de toucher le produit. Nessayez pas dintervenir sur le produit et ne le dmontez jamais. Pour certains produits contenant une batterie remplaable par lutilisateur, veuillez lire et suivre les consignes contenues dans le manuel dutilisation. Ne renversez pas daliments ou de liquide sur le produit et ninsrez jamais dobjets dans les orifices. Nutilisez pas ce produit proximit dun point deau, de zones trs humides ou de condensation sauf si le produit a t spcifiquement conu pour une application extrieure. loignez le produit des radiateurs et autres sources de chaleur. Dbranchez toujours le produit de lalimentation avant de le nettoyer et utilisez uniquement un chiffon sec non pelucheux. INSTRUCCIONES DE SEGURIDAD Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto frente a posibles daos. No olvide consultar las instrucciones del usuario del producto para obtener ms informacin. La electricidad esttica puede resultar nociva para los componentes electrnicos. Descargue la electricidad esttica de su cuerpo (p. ej., tocando algn metal sin revestimiento conectado a tierra) antes de tocar el producto. No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batera reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. No derrame comida o lquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo. No utilice este producto cerca del agua, en zonas con humedad o condensacin elevadas a menos que el producto est clasificado especficamente para aplicacin en exteriores. Mantenga el producto alejado de los radiadores y de otras fuentes de calor. Desenchufe siempre el producto de la alimentacin de red antes de limpiarlo y utilice solo un pao seco sin pelusa. D-Link DIR-615/DIR-612 User Manual 140 Appendix D - Regulatory Information ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per lutente del prodotto. Lelettricit statica pu essere pericolosa per i componenti elettronici. Scaricare lelettricit statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto. Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dallutente, leggere e seguire le istruzioni riportate nel manuale dellutente. Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto. Non usare questo prodotto vicino allacqua, in aree con elevato grado di umidit o soggette a condensa a meno che il prodotto non sia specificatamente approvato per uso in ambienti esterni. Tenere il prodotto lontano da caloriferi e altre fonti di calore. Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci filacce. VEILIGHEIDSINFORMATIE De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie. Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het aanraken van geaard bloot metaal) voordat uhet product aanraakt. U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen. Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen. Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product specifiek geclassificeerd is voor gebruik buitenshuis. Houd het product uit de buurt van radiators en andere warmtebronnen. U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DIR-615/DIR-612 User Manual 141 Appendix D - Regulatory Information Disposing of and Recycling Your Product ENGLISH EN DE This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions. To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com. DEUTSCH Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gem bestehender rtlicher Gesetze und Vorschriften nicht ber den normalen Hausmll entsorgt werden sollte, sondern einer Wiederverwertung zuzufhren ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehrde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Fr die Annahme solcher Produkte erheben einige dieser Stellen keine Gebhren. Durch ein auf diese Weise durchgefhrtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche Gesundheit zu schtzen. D-Link und die Umwelt D-Link ist sich den mglichen Auswirkungen seiner Geschftsttigkeiten und seiner Produkte auf die Umwelt bewusst und fhlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel grtmglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung. D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren. Wenn Sie mehr ber unsere umweltgerechten Produkte und Verpackungen wissen mchten, finden Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 142 Appendix D - Regulatory Information FRANAIS ESPAOL Ce symbole appos sur le produit ou son emballage signifie que, conformment aux lois et rglementations locales, ce produit ne doit pas tre limin avec les dchets domestiques mais recycl. Veuillez le rapporter un point de collecte prvu cet effet par les autorits locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manire, vous aidez prserver lenvironnement et protger la sant de lhomme. D-Link et lenvironnement Chez D-Link, nous sommes conscients de l'impact de nos oprations et produits sur l'environnement et nous engageons le rduire. Pour limiter cet impact, D-Link conoit et fabrique ses produits de manire aussi cologique que possible, en utilisant des matriaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages. D-Link recommande de toujours teindre ou dbrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous raliserez ainsi des conomies dnergie et rduirez vos missions de CO2. Pour en savoir plus sur les produits et emballages respectueux de lenvironnement, veuillez consulter le www.dlinkgreen.com. FR ES Este smbolo en el producto o el embalaje significa que, de acuerdo con la legislacin y la normativa local, este producto no se debe desechar en la basura domstica sino que se debe reciclar. Llvelo a un punto de recogida designado por las autoridades locales una vez que ha llegado al fin de su vida til; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos. D-Link y el medio ambiente En D-Link, comprendemos y estamos comprometidos con la reduccin del impacto que puedan tener nuestras actividades y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link disea y fabrica sus productos para que sean lo ms ecolgicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje. D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estn utilizando. Al hacerlo, contribuir a ahorrar energa y a reducir las emisiones de CO2. Para obtener ms informacin acerca de nuestros productos y embalajes ecolgicos, visite el sitio www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 143 Appendix D - Regulatory Information ITALIANO D-Link e l'ambiente NEDERLANDS D-Link en het milieu La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformit alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorit locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuir a preservare l'ambiente e a salvaguardare la salute umana. D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il pi possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di tossicit sia per i prodotti che per gli imballaggi. D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuir a risparmiare energia e a ridurre le emissioni di anidride carbonica. Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com. Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen. Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. IT NL D-Link DIR-615/DIR-612 User Manual 144 Appendix D - Regulatory Information Ten symbol umieszczony na produkcie lub opakowaniu oznacza, e zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzuca jak odpady czy mieci z gospodarstwa domowego, lecz naley go podda procesowi recyklingu. Po zakoczeniu uytkowania produktu, niektre odpowiednie do tego celu podmioty przyjm takie produkty nieodpatnie, dlatego prosimy dostarczy go do punktu zbirki wskazanego przez lokalne wadze. Poprzez proces recyklingu i dziki takiemu postpowaniu z produktem oraz jego opakowaniem, pomog Pastwo chroni rodowisko naturalne i dba o ludzkie zdrowie. D-Link i rodowisko D-Link podchodzimy w sposb wiadomy do ochrony otoczenia oraz jestemy zaangaowani w zmniejszanie wpywu naszych dziaa i produktw na rodowisko naturalne. W celu zminimalizowania takiego wpywu firma D-Link konstruuje i wytwarza swoje produkty w taki sposb, aby byy one jak najbardziej przyjazne rodowisku, stosujc do tych celw materiay nadajce si do powtrnego wykorzystania, charakteryzujce si ma toksycznoci zarwno w przypadku samych produktw jak i opakowa. Firma D-Link zaleca, aby Pastwo zawsze prawidowo wyczali z uytku swoje produkty D-Link, gdy nie s one wykorzystywane. Postpujc w ten sposb pozwalaj Pastwo oszczdza energi i zmniejsza emisje CO2. Aby dowiedzie si wicej na temat produktw i opakowa majcych wpyw na rodowisko prosimy zapozna si ze stron Internetow www. dlinkgreen.com. POLSKI ESKY PL CZ Tento symbol na vrobku nebo jeho obalu znamen, e podle mstn platnch pedpis se vrobek nesm vyhazovat do komunlnho odpadu, ale odeslat k recyklaci. A vrobek doslou, odneste jej prosm na sbrn msto uren mstnmi ady k tomuto elu. Nkter sbrn msta pijmaj vrobky zdarma. Recyklac vrobku i obalu pomhte chrnit ivotn prosted i lidsk zdrav. D-Link a ivotn prosted Ve spolenosti D-Link jsme si vdomi vlivu naich provoz a vrobk na ivotn prosted a sname se o minimalizaci tchto vliv. Proto sv vrobky navrhujeme a vyrbme tak, aby byly co nejekologitj, a ve vrobcch i obalech pouvme recyklovateln a nzkotoxick materily. Spolenost D-Link doporuuje, abyste sv vrobky znaky D-Link vypnuli nebo vythli ze zsuvky vdy, kdy je nepouvte. Pomete tak etit energii a snit emise CO2. Vce informac o naich ekologickch vrobcch a obalech najdete na adrese www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 145 Appendix D - Regulatory Information MAGYAR Ez a szimblum a termken vagy a csomagolson azt jelenti, hogy a helyi trvnyeknek s szablyoknak megfelelen ez a termk nem semmisthet meg a hztartsi hulladkkal egytt, hanem jrahasznostsra kell kldeni. Krjk, hogy a termk lettartamnak elteltt kveten vigye azt a helyi hatsg ltal kijellt gyjthelyre. A termkek egyes helyeken ingyen elhelyezhetk. A termk s a csomagols jrahasznostsval segti vdeni a krnyezetet s az emberek egszsgt. A D-Link s a krnyezet A D-Linknl megrtjk s elktelezettek vagyunk a mveleteink s termkeink krnyezetre gyakorolt hatsainak cskkentsre. Az ezen hats cskkentse rdekben a D-Link a lehet leginkbb krnyezetbart termkeket tervez s gyrt azltal, hogy jrahasznosthat, alacsony krosanyag-

tartalm termkeket gyrt s csomagolsokat alkalmaz. A D-Link azt javasolja, hogy mindig kapcsolja ki vagy hzza ki a D-Link termkeket a tpforrsbl, ha nem hasznlja azokat. Ezzel segt az energia megtakartsban s a szndioxid kibocstsnak cskkentsben. Krnyezetbart termkeinkrl s csomagolsainkrl tovbbi informcikat a www.dlinkgreen.com weboldalon tudhat meg. HU NO Dette symbolet p produktet eller forpakningen betyr at dette produktet iflge lokale lover og forskrifter ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter nr det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved p denne mten gjenvinne produktet og forpakningen hjelper du verne miljet og beskytte folks helse. NORSK D-Link og miljet Hos D-Link forstr vi oss p og er forpliktet til minske innvirkningen som vr drift og vre produkter kan ha p miljet. For minimalisere denne innvirkningen designer og lager D-Link produkter som er s miljvennlig som mulig, ved bruke resirkulerbare, lav-toksiske materialer bde i produktene og forpakningen. D-Link anbefaler at du alltid slr av eller frakobler D-Link-produkter nr de ikke er i bruk. Ved gjre dette hjelper du spare energi og redusere CO2-utslipp. For mer informasjon angende vre miljansvarlige produkter og forpakninger kan du g til www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 146 Appendix D - Regulatory Information DANSK SUOMI Dette symbol p produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke m bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, nr det er net til slutningen af dets levetid. I nogle tilflde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til genbrug p denne mde bidrager du til at beskytte miljet og den menneskelige sundhed. D-Link og miljet Hos D-Link forstr vi og bestrber os p at reducere enhver indvirkning, som vores aktiviteter og produkter kan have p miljet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, s de er s miljvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i bde produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, nr de ikke er i brug. Ved at gre det bidrager du til at spare energi og reducere CO2-udledningerne. Du kan finde flere oplysninger om vores miljmssigt ansvarlige produkter og emballage p www.dlinkgreen.com. DK FI Tm symboli tuotteen pakkauksessa tarkoittaa, ett paikallisten lakien ja snnsten mukaisesti tt tuotetta ei pid hvitt yleisen kotitalousjtteen seassa vaan se tulee toimittaa kierrtettvksi. Kun tuote on elinkaarensa pss, toimita se lhimpn viranomaisten hyvksymn kierrtyspisteeseen. Kierrttmll kytetyn tuotteen ja sen pakkauksen autat tukemaan sek ympristn ett ihmisten terveytt ja hyvinvointia. D-Link ja ymprist D-Link ymmrt ympristnsuojelun trkeyden ja on sitoutunut vhentmn tuotteistaan ja niiden valmistuksesta ympristlle mahdollisesti aiheutuvia haittavaikutuksia. Nm negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman ympristystvllisiksi kyttmll kierrtettvi, alhaisia pitoisuuksia haitallisia aineita sisltvi materiaaleja sek tuotteissaan ett niiden pakkauksissa. Suosittelemme, ett irrotat D-Link-tuotteesi virtalhteest tai sammutat ne aina, kun ne eivt ole kytss. Toimimalla nin autat sstmn energiaa ja vhentmn hiilidioksiidipstj. Lue lis ympristystvllisist D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 147 Appendix D - Regulatory Information SVENSKA D-Link och miljn PORTUGUS Den hr symbolen p produkten eller frpackningen betyder att produkten enligt lokala lagar och freskrifter inte skall kastas i hushllssoporna utan i stllet tervinnas. Ta den vid slutet av dess livslngd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att p detta stt tervinna produkten och frpackningen hjlper du till att bevara miljn och skydda mnniskors hlsa. P D-Link frstr vi och r fast beslutna att minska den pverkan vra verksamheter och produkter kan ha p miljn. Fr att minska denna pverkan utformar och bygger D-Link sina produkter fr att de ska vara s miljvnliga som mjligt, genom att anvnda tervinningsbara material med lg gifthalt i bde produkter och frpackningar. D-Link rekommenderar att du alltid stnger av eller kopplar ur dina D-Link produkter nr du inte anvnder dem. Genom att gra detta hjlper du till att spara energi och minska utslpp av koldioxid. Fr mer information om vra miljansvariga produkter och frpackningar www.dlinkgreen.com. Este smbolo no produto ou embalagem significa que, de acordo com as leis e regulamentaes locais, este produto no dever ser eliminado juntamente com o lixo domstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o fim da sua vida til, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a sade humana. A D-Link e o ambiente Na D-Link compreendemos e comprometemo-nos com a reduo do impacto que as nossas operaes e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constri os seus produtos para que estes sejam o mais inofensivos para o ambiente possvel, utilizando meteriais reciclveis e no txicos tanto nos produtos como nas embalagens. A D-Link recomenda que desligue os seus produtos D-Link quando estes no se encontrarem em utilizao. Com esta aco ajudar a poupar energia e reduzir as emisses de CO2. Para saber mais sobre os nossos produtos e embalagens responsveis a nvel ambiental visite www.dlinkgreen.com. SE PT D-Link DIR-615/DIR-612 User Manual 148 Appendix D - Regulatory Information NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY):

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, and CY. Usage Notes:

To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed. Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz wireless. HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPISCHEN GEMEINSCHAFT ( NUR FR EIN DRAHTLOSES PRODUKT ) Bei diesem Gert handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Lndern - ausgenommen Frankreich. Der Betrieb dieses Gerts ist in den folgenden Lndern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebrauchshinweise:

Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und Kanalbeschrnkungen, dem jeweiligen Land, in dem das Gert zum Einsatz kommt, entsprechend, auf die Produkte angewandt. Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gert eine 2,4 GHz Verbindung nutzt. D-Link DIR-615/DIR-612 User Manual 149 Appendix D - Regulatory Information AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUT EUROPENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) Cet appareil est un systme de transmission large bande (metteur-rcepteur) de 2,4 GHz, destin tre utilis dans tous les tats-

membres de l'UE et les pays de l'AELE. Cet quipement peut tre utilis dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notes d'utilisation:

Pour rester en conformit avec la rglementation nationale europenne en matire d'utilisation du spectre, des limites de frquence et de canal seront appliques aux produits selon le pays o l'quipement sera dploy. Merci de vous rfrer au guide d'utilisation ou de la fiche technique afin de vrifier si votre produit utilise 2.4 GHz sans fil. AVISO DE USO DE LA LAN DE RADIO INALMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO INALMBRICO) Este dispositivo es un sistema de transmisin (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros de la UE y en los pases de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Notas de uso:

Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarn limitaciones de frecuencia y canal en los productos en funcin del pas en el que se pondr en funcionamiento el equipo. Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalmbricas de 2.4 GHz . D-Link DIR-615/DIR-612 User Manual 150 Appendix D - Regulatory Information AVVISO PER LUSO DI LAN RADIO WIRELESS NELLA COMUNIT EUROPEA (SOLO PER PRODOTTI WIRELESS) Questo dispositivo pu essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Note per luso Al fine di mantenere la conformit alle normative nazionali europee per luso dello spettro di frequenze, saranno applicate limitazioni sulle frequenze e sui canali per il prodotto in conformit alle normative del paese in cui il dispositivo viene utilizzato. Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz . KENNISGEVING VAN DRAADLOOS RADIO LAN-GEBRUIK IN DE EUROPESE GEMEENSCHAP (ALLEEN VOOR DRAADLOOS PRODUCT) Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY Gebruiksaanwijzingen:

Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast op de producten volgens het land waar de uitrusting gebruikt zal worden. Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz. D-Link DIR-615/DIR-612 User Manual 151 Appendix D - Regulatory Information SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. Do not spill food or liquid on your product and never push any objects into the openings of your product. Do not use this product near water, areas with high humidity, or condensation unless the product is specifically rated for outdoor application. Always unplug the product from mains power before cleaning and use a dry lint free cloth only. Keep the product away from radiators and other heat sources. SICHERHEITSVORSCHRIFTEN Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewhrleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts. Weitere Details finden Sie in den Benutzeranleitungen zum Produkt. Statische Elektrizitt kann elektronischen Komponenten schaden. Um Schden durch statische Aufladung zu vermeiden, leiten Sie elektrostatische Ladungen von Ihrem Krper ab,

(z. B. durch Berhren eines geerdeten blanken Metallteils), bevor Sie das Produkt berhren. Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Fr einige Produkte mit austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen. Vermeiden Sie, dass Speisen oder Flssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstnde in die Gehuseschlitze oder

-ffnungen Ihres Produkts. Verwenden Sie dieses Produkt nicht in unmittelbarer Nhe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation, es sei denn, es ist speziell zur Nutzung in Auenbereichen vorgesehen und eingestuft. Halten Sie das Produkt von Heizkrpern und anderen Quellen fern, die Wrme erzeugen. Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschlielich ein trockenes fusselfreies Tuch. D-Link DIR-615/DIR-612 User Manual 152 Appendix D - Regulatory Information CONSIGNES DE SCURIT Les consignes gnrales de scurit ci-aprs sont fournies afin dassurer votre scurit personnelle et de protger le produit dventuels dommages. Veuillez consulter les consignes dutilisation du produit pour plus de dtails. Llectricit statique peut endommager les composants lectroniques. Dchargez llectricit statique de votre corps (en touchant un objet en mtal reli la terre par exemple) avant de toucher le produit. Nessayez pas dintervenir sur le produit et ne le dmontez jamais. Pour certains produits contenant une batterie remplaable par lutilisateur, veuillez lire et suivre les consignes contenues dans le manuel dutilisation. Ne renversez pas daliments ou de liquide sur le produit et ninsrez jamais dobjets dans les orifices. Nutilisez pas ce produit proximit dun point deau, de zones trs humides ou de condensation sauf si le produit a t spcifiquement conu pour une application extrieure. loignez le produit des radiateurs et autres sources de chaleur. Dbranchez toujours le produit de lalimentation avant de le nettoyer et utilisez uniquement un chiffon sec non pelucheux. INSTRUCCIONES DE SEGURIDAD Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto frente a posibles daos. No olvide consultar las instrucciones del usuario del producto para obtener ms informacin. La electricidad esttica puede resultar nociva para los componentes electrnicos. Descargue la electricidad esttica de su cuerpo (p. ej., tocando algn metal sin revestimiento conectado a tierra) antes de tocar el producto. No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batera reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. No derrame comida o lquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo. No utilice este producto cerca del agua, en zonas con humedad o condensacin elevadas a menos que el producto est clasificado especficamente para aplicacin en exteriores. Mantenga el producto alejado de los radiadores y de otras fuentes de calor. Desenchufe siempre el producto de la alimentacin de red antes de limpiarlo y utilice solo un pao seco sin pelusa. D-Link DIR-615/DIR-612 User Manual 153 Appendix D - Regulatory Information ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per lutente del prodotto. Lelettricit statica pu essere pericolosa per i componenti elettronici. Scaricare lelettricit statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto. Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dallutente, leggere e seguire le istruzioni riportate nel manuale dellutente. Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto. Non usare questo prodotto vicino allacqua, in aree con elevato grado di umidit o soggette a condensa a meno che il prodotto non sia specificatamente approvato per uso in ambienti esterni. Tenere il prodotto lontano da caloriferi e altre fonti di calore. Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci filacce. VEILIGHEIDSINFORMATIE De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie. Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het aanraken van geaard bloot metaal) voordat uhet product aanraakt. U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen. Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen. Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product specifiek geclassificeerd is voor gebruik buitenshuis. Houd het product uit de buurt van radiators en andere warmtebronnen. U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DIR-615/DIR-612 User Manual 154 Appendix D - Regulatory Information Disposing and Recycling Your Product ENGLISH EN DE This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions. To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com. DEUTSCH Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gem bestehender rtlicher Gesetze und Vorschriften nicht ber den normalen Hausmll entsorgt werden sollte, sondern einer Wiederverwertung zuzufhren ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehrde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Fr die Annahme solcher Produkte erheben einige dieser Stellen keine Gebhren. Durch ein auf diese Weise durchgefhrtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche Gesundheit zu schtzen. D-Link und die Umwelt D-Link ist sich den mglichen Auswirkungen seiner Geschftsttigkeiten und seiner Produkte auf die Umwelt bewusst und fhlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel grtmglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung. D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren. Wenn Sie mehr ber unsere umweltgerechten Produkte und Verpackungen wissen mchten, finden Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 155 Appendix D - Regulatory Information FRANAIS ESPAOL Ce symbole appos sur le produit ou son emballage signifie que, conformment aux lois et rglementations locales, ce produit ne doit pas tre limin avec les dchets domestiques mais recycl. Veuillez le rapporter un point de collecte prvu cet effet par les autorits locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manire, vous aidez prserver lenvironnement et protger la sant de lhomme. D-Link et lenvironnement Chez D-Link, nous sommes conscients de l'impact de nos oprations et produits sur l'environnement et nous engageons le rduire. Pour limiter cet impact, D-Link conoit et fabrique ses produits de manire aussi cologique que possible, en utilisant des matriaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages. D-Link recommande de toujours teindre ou dbrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous raliserez ainsi des conomies dnergie et rduirez vos missions de CO2. Pour en savoir plus sur les produits et emballages respectueux de lenvironnement, veuillez consulter le www.dlinkgreen.com. FR ES Este smbolo en el producto o el embalaje significa que, de acuerdo con la legislacin y la normativa local, este producto no se debe desechar en la basura domstica sino que se debe reciclar. Llvelo a un punto de recogida designado por las autoridades locales una vez que ha llegado al fin de su vida til; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos. D-Link y el medio ambiente En D-Link, comprendemos y estamos comprometidos con la reduccin del impacto que puedan tener nuestras actividades y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link disea y fabrica sus productos para que sean lo ms ecolgicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje. D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estn utilizando. Al hacerlo, contribuir a ahorrar energa y a reducir las emisiones de CO2. Para obtener ms informacin acerca de nuestros productos y embalajes ecolgicos, visite el sitio www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 156 Appendix D - Regulatory Information ITALIANO D-Link e l'ambiente NEDERLANDS D-Link en het milieu La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformit alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorit locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuir a preservare l'ambiente e a salvaguardare la salute umana. D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il pi possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di tossicit sia per i prodotti che per gli imballaggi. D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuir a risparmiare energia e a ridurre le emissioni di anidride carbonica. Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com. Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen. Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. IT NL D-Link DIR-615/DIR-612 User Manual 157 Appendix D - Regulatory Information Ten symbol umieszczony na produkcie lub opakowaniu oznacza, e zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzuca jak odpady czy mieci z gospodarstwa domowego, lecz naley go podda procesowi recyklingu. Po zakoczeniu uytkowania produktu, niektre odpowiednie do tego celu podmioty przyjm takie produkty nieodpatnie, dlatego prosimy dostarczy go do punktu zbirki wskazanego przez lokalne wadze. Poprzez proces recyklingu i dziki takiemu postpowaniu z produktem oraz jego opakowaniem, pomog Pastwo chroni rodowisko naturalne i dba o ludzkie zdrowie. D-Link i rodowisko D-Link podchodzimy w sposb wiadomy do ochrony otoczenia oraz jestemy zaangaowani w zmniejszanie wpywu naszych dziaa i produktw na rodowisko naturalne. W celu zminimalizowania takiego wpywu firma D-Link konstruuje i wytwarza swoje produkty w taki sposb, aby byy one jak najbardziej przyjazne rodowisku, stosujc do tych celw materiay nadajce si do powtrnego wykorzystania, charakteryzujce si ma toksycznoci zarwno w przypadku samych produktw jak i opakowa. Firma D-Link zaleca, aby Pastwo zawsze prawidowo wyczali z uytku swoje produkty D-Link, gdy nie s one wykorzystywane. Postpujc w ten sposb pozwalaj Pastwo oszczdza energi i zmniejsza emisje CO2. Aby dowiedzie si wicej na temat produktw i opakowa majcych wpyw na rodowisko prosimy zapozna si ze stron Internetow www. dlinkgreen.com. POLSKI ESKY PL CZ Tento symbol na vrobku nebo jeho obalu znamen, e podle mstn platnch pedpis se vrobek nesm vyhazovat do komunlnho odpadu, ale odeslat k recyklaci. A vrobek doslou, odneste jej prosm na sbrn msto uren mstnmi ady k tomuto elu. Nkter sbrn msta pijmaj vrobky zdarma. Recyklac vrobku i obalu pomhte chrnit ivotn prosted i lidsk zdrav. D-Link a ivotn prosted Ve spolenosti D-Link jsme si vdomi vlivu naich provoz a vrobk na ivotn prosted a sname se o minimalizaci tchto vliv. Proto sv vrobky navrhujeme a vyrbme tak, aby byly co nejekologitj, a ve vrobcch i obalech pouvme recyklovateln a nzkotoxick materily. Spolenost D-Link doporuuje, abyste sv vrobky znaky D-Link vypnuli nebo vythli ze zsuvky vdy, kdy je nepouvte. Pomete tak etit energii a snit emise CO2. Vce informac o naich ekologickch vrobcch a obalech najdete na adrese www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 158 Appendix D - Regulatory Information MAGYAR Ez a szimblum a termken vagy a csomagolson azt jelenti, hogy a helyi trvnyeknek s szablyoknak megfelelen ez a termk nem semmisthet meg a hztartsi hulladkkal egytt, hanem jrahasznostsra kell kldeni. Krjk, hogy a termk lettartamnak elteltt kveten vigye azt a helyi hatsg ltal kijellt gyjthelyre. A termkek egyes helyeken ingyen elhelyezhetk. A termk s a csomagols jrahasznostsval segti vdeni a krnyezetet s az emberek egszsgt. A D-Link s a krnyezet A D-Linknl megrtjk s elktelezettek vagyunk a mveleteink s termkeink krnyezetre gyakorolt hatsainak cskkentsre. Az ezen hats cskkentse rdekben a D-Link a lehet leginkbb krnyezetbart termkeket tervez s gyrt azltal, hogy jrahasznosthat, alacsony krosanyag-

tartalm termkeket gyrt s csomagolsokat alkalmaz. A D-Link azt javasolja, hogy mindig kapcsolja ki vagy hzza ki a D-Link termkeket a tpforrsbl, ha nem hasznlja azokat. Ezzel segt az energia megtakartsban s a szndioxid kibocstsnak cskkentsben. Krnyezetbart termkeinkrl s csomagolsainkrl tovbbi informcikat a www.dlinkgreen.com weboldalon tudhat meg. HU NO Dette symbolet p produktet eller forpakningen betyr at dette produktet iflge lokale lover og forskrifter ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter nr det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved p denne mten gjenvinne produktet og forpakningen hjelper du verne miljet og beskytte folks helse. NORSK D-Link og miljet Hos D-Link forstr vi oss p og er forpliktet til minske innvirkningen som vr drift og vre produkter kan ha p miljet. For minimalisere denne innvirkningen designer og lager D-Link produkter som er s miljvennlig som mulig, ved bruke resirkulerbare, lav-toksiske materialer bde i produktene og forpakningen. D-Link anbefaler at du alltid slr av eller frakobler D-Link-produkter nr de ikke er i bruk. Ved gjre dette hjelper du spare energi og redusere CO2-utslipp. For mer informasjon angende vre miljansvarlige produkter og forpakninger kan du g til www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 159 Appendix D - Regulatory Information DANSK SUOMI Dette symbol p produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke m bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, nr det er net til slutningen af dets levetid. I nogle tilflde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til genbrug p denne mde bidrager du til at beskytte miljet og den menneskelige sundhed. D-Link og miljet Hos D-Link forstr vi og bestrber os p at reducere enhver indvirkning, som vores aktiviteter og produkter kan have p miljet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, s de er s miljvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i bde produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, nr de ikke er i brug. Ved at gre det bidrager du til at spare energi og reducere CO2-udledningerne. Du kan finde flere oplysninger om vores miljmssigt ansvarlige produkter og emballage p www.dlinkgreen.com. DK FI Tm symboli tuotteen pakkauksessa tarkoittaa, ett paikallisten lakien ja snnsten mukaisesti tt tuotetta ei pid hvitt yleisen kotitalousjtteen seassa vaan se tulee toimittaa kierrtettvksi. Kun tuote on elinkaarensa pss, toimita se lhimpn viranomaisten hyvksymn kierrtyspisteeseen. Kierrttmll kytetyn tuotteen ja sen pakkauksen autat tukemaan sek ympristn ett ihmisten terveytt ja hyvinvointia. D-Link ja ymprist D-Link ymmrt ympristnsuojelun trkeyden ja on sitoutunut vhentmn tuotteistaan ja niiden valmistuksesta ympristlle mahdollisesti aiheutuvia haittavaikutuksia. Nm negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman ympristystvllisiksi kyttmll kierrtettvi, alhaisia pitoisuuksia haitallisia aineita sisltvi materiaaleja sek tuotteissaan ett niiden pakkauksissa. Suosittelemme, ett irrotat D-Link-tuotteesi virtalhteest tai sammutat ne aina, kun ne eivt ole kytss. Toimimalla nin autat sstmn energiaa ja vhentmn hiilidioksiidipstj. Lue lis ympristystvllisist D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link DIR-615/DIR-612 User Manual 160 Appendix D - Regulatory Information SVENSKA D-Link och miljn PORTUGUS Den hr symbolen p produkten eller frpackningen betyder att produkten enligt lokala lagar och freskrifter inte skall kastas i hushllssoporna utan i stllet tervinnas. Ta den vid slutet av dess livslngd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att p detta stt tervinna produkten och frpackningen hjlper du till att bevara miljn och skydda mnniskors hlsa. P D-Link frstr vi och r fast beslutna att minska den pverkan vra verksamheter och produkter kan ha p miljn. Fr att minska denna pverkan utformar och bygger D-Link sina produkter fr att de ska vara s miljvnliga som mjligt, genom att anvnda tervinningsbara material med lg gifthalt i bde produkter och frpackningar. D-Link rekommenderar att du alltid stnger av eller kopplar ur dina D-Link produkter nr du inte anvnder dem. Genom att gra detta hjlper du till att spara energi och minska utslpp av koldioxid. Fr mer information om vra miljansvariga produkter och frpackningar www.dlinkgreen.com. Este smbolo no produto ou embalagem significa que, de acordo com as leis e regulamentaes locais, este produto no dever ser eliminado juntamente com o lixo domstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o fim da sua vida til, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a sade humana. A D-Link e o ambiente Na D-Link compreendemos e comprometemo-nos com a reduo do impacto que as nossas operaes e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constri os seus produtos para que estes sejam o mais inofensivos para o ambiente possvel, utilizando meteriais reciclveis e no txicos tanto nos produtos como nas embalagens. A D-Link recomenda que desligue os seus produtos D-Link quando estes no se encontrarem em utilizao. Com esta aco ajudar a poupar energia e reduzir as emisses de CO2. Para saber mais sobre os nossos produtos e embalagens responsveis a nvel ambiental visite www.dlinkgreen.com. SE PT D-Link DIR-615/DIR-612 User Manual 161 Appendix D - Regulatory Information

Diagram Label location The information will be placed in the manual (Page 130) and on the device packaging. FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

SGS North America Inc. i i 620 Old Peachtree Road Applicant Declaration SUITE 100

| Suwanee, Georgia 30024 i United States Applicant Legal Business Name D-Link Corporation Address 14420 Myford Road Suite 100,Irvine,California,United States Grantee Code KA2 FCC ID KA2IR615Z1 Authorized Contact Name Laroche Hsieh Contact Email laroche.hsieh@dlinkcorp.com Contact Phone +886-2-6600-0123 I, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) _ ifthe Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment continue to comply with the FCCs technical requirements. d) In accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321, e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shail make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shal/, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. 1) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: hitos:/Awww fee. govAwireless/bureau-divisions/technologies-systems-and-innovation-division/mules-requtations-title-47 Link to KDBs: https://apps.fcc.gov/oetcfikdb/index.cfm Link to RSP-100: https://www.ic.qe.ca/eic/site/smt-gst.nsffeng/s{01130.htm|

Applicant Signature: Date:

KX Print Narne:

Laroche Hsieh Title:

Vice President NOTE: This decfaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

D-Lin Building Networks for People To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: USA 14420 Myford Road Suite 100 Address Irvine, California, 92606 Regarding: Confidentiality Request regarding application for FCC ID KA2/R615Z1 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harrnful to the business of the applicant. Sincerely, aati Printed Name: Laroche Hsieh Title: Vice President ~

D-Link Corporation

D-Link Power of Attorney 14420 Myford Road, Suite 100 Irvine, CA 92606 Sep 24", 2021 To whom it may concern:

|, the undersigned, Brett Adair, hereby authorize the persons listed below to act in behalf of me to sign all Related documents for D-Links FCC application. | am the Point of Contact for the FCC. Our FRN is: 0007371172 Laroche Hsieh / Senior Director

+886-2-66000123 #5220 Laroche. Hsieh@dlinkcorp.com Peter Yu / Senior Director

+886-2-66000123 #5230 Peter. Yu@dlinkcorp.com Company Name: D-Link Co.Ltd Fax: 886-2-55509988 Company Address: No.289, Sinhu 3 Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Authorization period: Sep 24", 2021 - Dec 315, 2022 Should you have and question regarding this power of attorney, please don't hesitate to Contact me. Sincerely, Brett Adal D-Link TEL: (714) 885-6000 E-mail: brett.adair@dlink.com