DSH-G300 D-Link Corporation DSH-G300 Smart Hub Manual Version 1.0 Dec 7th, 2017 Page 1 DSH-G300 D-Link Corporation Table of Contents 1. PRODUCT DESCRIPTION .................................................................................. 3 2. APPEARANCE ..................................................................................................... 3 3. INSTALLATIONS & CONFIGURATIONS ....................................................... 4 Page 2 DSH-G300 D-Link Corporation 1. PRODUCT DESCRIPTION The DSH-G300 is a ZigBee to Ethernet gateway device that uses a generic hardware design and can be deployed as different versions to fulfil different applications. 2. APPEARANCE Top LED: Status indicator Wireless button: pairing/un-pairing Rear LAN port Micro USB: Power jack, Vdc : 5V/2.A USB port Bottom Reset button Page 3 DSH-G300 D-Link Corporation Mounting installation 3. INSTALLATIONS & CONFIGURATIONS how to build firmware by GPL Install tools Install fedora linux 22, and make sure you can connect to internet. Run command as below (ps : switch to root permission):
#yum -y update
#yum -y install gcc
#yum -y install zlib-devel openssl-devel
#yum -y install gcc-c++
#yum -y install bison
#yum -y install flex
#yum -y install ncurses-devel
#yum -y install fakeroot
#yum -y install patch The workstation we used to build the image is:
OS Version: Fedora 22 (32-bit version on AMD or Intel system) OS Kernel Version: 4.1.6-200.fc22.i686 GCC Version: 5.3.1 20160406 (Red Hat 5.3.1-6)
(You may use other Linux distribution as your workstation but Page 4 DSH-G300 D-Link Corporation no guarantee of a successful build.) Setup Build Enviornment($means command) 1) please login as a normal user such as john, and copy the gpl file to normal user folder, such as the folder /home/john 2) $cd /home/john 3) $tar zxvf DSHG300_A1_GPLv100b01.tar.gz 4) $cd DSHG300_A1_GPLv100b01 5) $su (ps : switch to root permission) 6) #mkdir /opt (if "/opt" is already exist, skip this step) 7) #cp -rf buildroot-gcc463 /opt 8) #exit (ps : switch back to normal user permission) 9) $source ./setupenv Building the image
$make
$make
$make
===================================================
You are going to build the f/w images. Both the release and tftp images will be generated.
===================================================
Do you want to build it now ? (yes/no) : yes Page 5 DSH-G300 D-Link Corporation 4) After make successfully, you will find the image file in ./images/. Tips: If there are some options need to be selected, please input "enter" key to execute the default action. How to install file into firmware Copy file into rootfs then rebuild gpl firmware by make release.
$cd DSHG300_A1_GPLv100b01
$cp ~/test_lib rootfs/lib
$make release Tips: If there is not rootfs, please using full steps to build firmware firstly. How to add a mtd partition enable jffs2 support in kernel config Before this step, please using full steps to build firmware Page 6 DSH-G300 firstly. D-Link Corporation Run kernel menuconfig and select jffs2 option, then save it.
$ cd DSHG300_A1_GPLv100b01/kernels/MT7688_linux-2.6.36.x
$ make menuconfig File systems --->
Miscellaneous filesystems --->
<*> Journalling Flash File System v2 (JFFS2) support
(0) JFFS2 debugging verbosity (0 = quiet, 2 = noisy)
[*] JFFS2 write-buffering support
[ ] JFFS2 summary support (EXPERIMENTAL)
[ ] JFFS2 XATTR support (EXPERIMENTAL)
[ ] Advanced compression options for JFFS2
<*> Compressed ROM file system support (cramfs) Copy kernel config into boards folder.
$ cp .config ../../boards/wrgn104/kernel.config add mtd partition Modify mtd partition map in file:
DSHG300_A1_GPLv100b01/kernels/MT7688_linux-
2.6.36.x/drivers/mtd/ralink/ralink_bbu_spi.c This is a sample which add a mtd partition named by test, and size of this partition is 320k:
Re-bulid gpl firmware and upgrade gpl firmware into device. Page 7 ralink_bbu_spi.c DSH-G300 D-Link Corporation mount mtd partition After firmware upgrade, show all mtd partitions by below command:
$ cat proc/mtd For this example, data mtd partition is mtd6 , its means that dev path of data mtd partition is /dev/mtdblock/6. Use below command to mount mtd partition test with jffs2 type.
$ mount -t jffs2 /dev/mtdblock/6 /data Tips1: mtd partition must larger than 320k. Tips2: we can add mtd partition by reduce upgrade mtd partition size, but upgrade is used to upgrade firmware. So we must make sure size of upgrade mtd partition always larger than firmware size. Tips3: in gpl v100b04, we auto mount the data mtd partition to /data while device boot up. How to upgrade firmware by web Enter URL http://192.168.0.50/ and login it. Page 8 DSH-G300 Default password is null(). D-Link Corporation Enter firmware upgrade page. Select firmware file and press Upload button. Page 9 DSH-G300 D-Link Corporation How to use telnet and tftp How to use telnet Telnet is enable as default,use tool to access it. Example is Microsoft cmd tool. Device default ip is 192.168.0.50. How to use tftp Tftp can transfer a file from/to tftp server. This is an exanple(tftp server ip is 192.168.0.38).
$ #get file from tftp server
$ tftp -r get_file.txt -l get_file.txt -g 192.168.0.38
$ #put file from tftp server
$ tftp -r put_file.txt -l put _file.txt -g 192.168.0.38 Page 10 DSH-G300 D-Link Corporation Console define Console connection type is Serial and speed is 57600 Page 11 DSH-G300 D-Link Corporation FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. If this device is going to be operated in 5.15 ~ 5.25GHz frequency range, then it is restricted in indoor environment only. IMPORTANT NOTICE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. Page 12