FCC ID: U4GMEMKUS MEMOR K

822004200 Memor is a registered trademark of Datalogic S.p.A. and/or its affiliates in many countries, including the U.S.A. and the E.U. 3.5 MEMOR K SAFETY & REGULATORY ADDENDUM BATTERY SAFETY GUIDELINES Datalogic S.r.l. Via San Vitalino 13 40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 2020 Datalogic S.p.A. and/or its affiliates All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro-

duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and tran-

smit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publi-

cations, please let us know via the "Contact" page. Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-

rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other trademarks and brands are property of their respective owners. Google, Google Play and other marks are trademarks of Google LLC. Disclaimer Trademarks Patents See www.patents.datalogic.com for patent list. This product is covered by one or more of the following patents:

Utility patents: EP1825417B1, EP2517148B1, EP2649555B1, EP3016028B1, US6808114, US6997385, US7387246, US7721966, US8245926, US8561906, US8888003, US8915443, US9361503, US9798948, ZL200980163411.X, ZL201080071124.9. Mobile Computer with 1D/2D Imager NOTE: Read carefully the Memor K User Manual (available at www.datalogic.com) before performing any type of connection to the Memor K. The user is responsible for any damage caused by incorrect use of the equipment or by inobservance of the indication supplied in the user manual. GENERAL SAFETY RULES CAUTION:

Before using the devices and the battery packs, read this Addendum carefully. Use only the components and accessories supplied by the manufacturer for the specific Memor K being used. Do not attempt to disassemble the Memor K device, as it does not contain parts that can be repaired by the user. Any tampering will invalidate the warranty. When replacing the battery pack or at the end of the operative life of the Memor K device, disposal must be performed in compliance with the laws in force in your jurisdiction. Do not submerge the Memor K in liquid products. For further information or support, refer to the Datalogic web site: www. datalogic.com. CLEANING THE DEVICE Periodically clean the Memor K using a soft cloth slightly dampened with only water or Isopropyl Alcohol (70%). Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, solvents) or abrasive pads to clean the device. Do not spray or pour liquids directly onto the device. The device is IP54 waterproof. 2020 Datalogic S.p.A. and/or its affiliates All rights reserved Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. This document is an addendum to the Quick Start Guide (QSG) for this product. See the QSG for additional product information. www.datalogic.com POWER SUPPLY The device is intended to be supplied by a self-contained rechargeable Lithium Ion battery pack (UL listed LPS/SELV power source) and/or by UL Listed/CSA Certified Power Unit LPS/SELV power source which sup-

plies power directly to the unit via the micro USB connector of the cable. The device could be also used with Certified Accessories (Dock/Cradle) which supply Wireless power. The Dock/Cradle accessories are inten-

ded to be supplied by a UL Listed/CSA Certified Power Unit LPS/SELV rating 12V, min 5A power source which supplies power via the power connector of the cable. Any changes or modifications to equipment, not expressly approved by Datalogic could void the user's authority to operate the equipment. BATTERY INFORMATION CAUTION: Do not incinerate, disassemble, short terminals, or expose to high temperature. Risk of fire and explosion. Use specified charger only. Risk of explosion if the battery is replaced by an incorrect type. Dispose of batteries as required by local authorities. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. By default, the main battery pack is disconnected at the factory to avoid damage due to excessive draining. Rechargeable battery pack is less than half of full charge when delive-

red. Charge the battery pack as indicated in the Quick Start Guide or in the User Manual, before using the Memor K terminal. The battery pack autonomy varies according to many factors, such as the frequency of barcode scanning, RF usage, battery life, storage, envi-

ronmental conditions, etc. Close to the limits of the working temperature, some battery perfor-

mance degradation may occur. The Memor K should be charged at an ambient temperature between 0 - 35 C (32 to 122F) to achieve the maximum charging rate. Never charge the device battery in a closed space where excessive heat can build up. As a safety precaution, the battery may stop charging to avoid overheating. The Memor K gets warm during charging; this is normal and does not mean a malfunction. Even if the storage temperature range is wider, it is recommended to store the terminal and the batteries at environmental temperature, in order to achieve the longest battery life. CAUTION: Avoid storing batteries for long periods in a state of full charge or very low charge. We recommend charging the battery pack every two to three months to keep its charge at a moderate level to maximize battery life. Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. WARNING: Use only Datalogic approved batteries and accessories for battery charging. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteris usages confor mment aux instructions. INFORMATIONS SUR LA BATTERIE PRCAUTION: Ne pas incinrer, dmonter, court-circuiter terminaux ou exposer des tempratures leves. Risque dincendie et explosion. Utilisez uniquement le chargeur spcifi. Risque dexplosion si la batterie est remplace par un type incorrect. Se dbarrasser batteries requises par les autorits locales. 852002040 (Rev. A) July 2020 Une batterie soumise une pression dair extrmement faible pouvant entraner une explosion ou une fuite de liquide ou de gaz inflammable. WARNING: Installing, charging and/or any other action should be done by authorized personnel and following this manual. The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion. Do not place the battery pack in or near a fire or other heat source; do not place the battery pack in direct sunlight, or use or store the battery pack inside unventilated areas in hot weather; do not place the battery pack in microwave ovens, in clothes dryers, in high pressure containers, on induction cook surfaces or similar devices. Doing somay cause the battery pack to generate heat, explode or ignite. Using the battery pack in this manner may also result in a loss of performance and a shortened life expectancy. To power the cradle, use only a Datalogic approved power supply. The use of an alternative power supply will void the product warranty, may cause product damage and may cause heat, an explosion, or fire. The area in which the units are charged should be clear of debris and combustible materials or chemicals. Do not use the battery pack of this terminal to power devices other than this device. Immediately discontinue use of the battery pack if, while using, charging or storing the battery pack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appears abnormal in any other way. Do not short-circuit the battery pack contacts connecting the positive terminal and negative terminal. This might happen, for example, when you carry a spare battery pack in your pocket or purse; accidental shortcircuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the contacts of the battery pack (these look like metal strips on the battery pack). Shortcircuiting the terminals may damage the battery pack or the connecting object. Do not apply voltages to the battery pack contacts. WARNING: Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts, pressures, or shocks. AVERTISSEMENT: Ne percez pas la batterie avec des clous, ne la frappez pas avec un marteau, ne marchez sinon, soumettez-le de forts impacts, pressions ou chocs. WARNING: Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. AVERTISSEMENT: Ne dmontez pas et ne modifiez pas (c.--d. pliez, crasez ou dformez) la batterie. La batterie le pack contient des dispositifs de scurit et de protection qui, sils sont endommags, peuvent endommager la batterie pack pour gnrer de la chaleur, exploser ou senflammer. WARNING: In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area withwater and consult a doctor. Do not solder directly onto the battery pack. Do not expose the battery pack to liquids. Avoid any knocks or excessive vibrations. WARNING: If the device or the battery is dropped, especially on a hard surface, you should take it to the nearest Authorised Repair Centre for inspection before continuing to use it. If your device stops working for any reason, do not use its battery on other electronic devices without a prior check and approval by an Authorised Repair Centre. Do not remove or damage the battery packs label. Do not use the battery pack if it is damaged in any part. Battery pack usage by children should be supervised. Collect and recycle waste batteries separately from the device in compliance with European Directive 2006/66/EC, 2011/65, 2002/96/EC and subsequent modifications, with US and China regulatory laws and regulations about the environment. DIRECTIVES RELATIVES LA SCURIT DES BATTERIES AVERTISSEMENT: Installation, chargement et / ou toute autre action doit tre effectue par du personnel autoris et aprs ce manuel. La batterie peut devenir chaude, exploser, senflammer et / ou causer des blessures graves en cas dexposition des conditions abusives. Si la batterie est remplace par un type incorrect, il y a risque dexplosion. Ne placez pas la batterie dans ou prs dun feu ou autre source de chaleur; ne placez pas la batterie dans la lumire directe du soleil, ou utiliser ou stocker la batterie lintrieur zones non ventiles par temps chaud; ne placez pas le batterie dans les fours micro-ondes, dans les scheuses, dans rcipients haute pression, sur des surfaces de cuisson induction ou appareils similaires. Si vous le faites, la batterie gnrer de la chaleur, exploser ou senflammer. Utilisation de la batterie de cette manire peut galement entraner une perte de performance et une esprance de vie raccourcie. WIRELESS AND RADIO FREQUENCIES WARNINGS WARNING: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Memor K. Datalogic recommends persons with pacemakers or other medical devices to follow the same recommendations provided by Health Industry Manufacturers Associations for mobile phones. Persons with pacemakers:

Should ALWAYS keep this device more than twenty five (25) cm from their pacemaker and/or any other medical device;

Should not carry this device in a breast pocket;

Should keep the device at the opposite side of the pacemaker and/or any other medical device;

Should turn this device OFF or move it immediately AWAY if there is any reason to suspect that interference is taking place. Should ALWAYS read pacemaker or any other medical device guides or should consult the manufacturer of the medical device to determine if it is adequately shielded from external RF energy. In case of doubt concerning the use of wireless devices with an implanted medical device, contact your doctor. Turn this device OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If a vehicles wireless equipment is improperly installed and the air bag inflates, serious injury could result. Turn off the device when in any area with a potentially explosive atmosphere. Observe restrictions and follow closely any laws, regulations, warnings and best practices on the use of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where any operation involves use of explosive materials. WARNING: Do not store or carry flammable liquids, explosive gases or materials with the device or its parts or accessories. Areas with a potentially explosive atmosphere are often, but not always, clearly marked or shown. Sparks in such areas could cause an explosion or fire, resulting in injury or even death. LED CLASS LED illuminator integrated in the imager engine is classified as EXEMPT RISK GROUP according to IEC62471. FCC COMPLIANCE Notice:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause unde-

sired operation. FCC ID: U4GMEMKUS Note:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a resi-

dential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a parti-

cular installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio/TV technician for help. These limits are designed to provide reasonable protection against harmful interference in a resi-

dential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to correct the interfe-

rence by one or more of the following measures:

y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply With RF exposure require-

ments, a minimum separation distance of 1.0cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic com-ponents. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information:

This wireless phone meets the governments requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. operations FCC RF Exposure Information and Statement:

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types:

U4GMEMKUS has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.870W/kg and when properly worn on the body is 0. 975W/kg, warn on limb is 0.988W/kg . This device was tested for typical body-worn with FCC RF exposure requirements, use accessories that maintain a 1cm separation distance between the users body and the back of the handset. The use of belt clips, holst-ers and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems. the back of the handset kept 1cm from the body. To maintain compliance with ISED COMPLIANCE Notice:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause unde-

sired operation. Caution:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the poten-

tial for harmful interference to cochannel mobile satellite systems;

(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-

5350MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. The highest SAR value reported under this standard during product certification for use at the ear is 0.870W/kg and when properly worn on the body is 0.975W/kg, warn on limb is 0.988 W/kg. ISED Radiation Exposure Statement This device is compliant with SAR for general population/uncontrolled exposure limits in RSS-

102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with a minimum distance of 0.39 in(10mm) between the radiator and your body. This device and its antennas must not be co-located or operated in conjunction with and other antenna or transmitter. CONFORMIT ISDE Remarquer:

Cet appareil est conforme aux normes RSS exemptes de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:

(1) cet appareil ne doit pas provoquer dinterfrences nuisibles, et

(2) cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Mise en garde:

(i) le dispositif destin fonctionner dans la bande 5150-5250 MHz est uniquement destin une utilisation en intrieur afin de rduire le potentiel dinterfrences nuisibles aux systmes mobiles par satellite canaux multiples;

(ii) les radars haute puissance sont attribus en tant quutilisateurs principaux (cest--dire les utilisateurs prioritaires) des bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourra-

ient causer des interfrences et / ou endommager les dispositifs LE-LAN. La valeur SAR la plus leve dclare en vertu de cette norme lors de la certification du produit pour une utilisation loreille est de 0.870 W / kg et lorsquelle est correctement porte sur le corps est de 0.975 W / kg, avertir sur le membre est de 0,988 W / kg Dclaration sur lexposition aux radiations dISDE Cet appareil est conforme aux limites d'exposition DAS incontrle pour la population gnrale de la norme CNR-102 Innovation. Scinces et Dveloppement conomique Canada et a t test en conformit avec les mthodes de mesure de procdures spcifies dans IEEE 1528 et IEC 62209. Cet appareil doit tre install et utilis avec une distance minimale de 10mm entre I'metteur et votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur.

Authority to Act as Agent Date: June 25, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

______ DEKRA Testing and Certification (Suzhou) Co., Ltd.______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____12 months_____ By:

Title:

On behalf of: _____ Datalogic S.r.l. _____ Telephone:

__________________________ ____Ruggero Cacioppo______

(Print name) _____Product Quality Leader ____ ______ +39 051 3147 393 ____

(Company Name)

(Signature1) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 053019 12 Request for Confidentiality Date: June 25, 2020 Subject: Confidentiality Request for:

FCC ID: U4GMEMKUS IC: 3862E-MEMKUS Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual ______ Datalogic S.r.l._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)3___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

Product Quality Leader, Ruggero Cacioppo

(Signature/Title4)

(Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 053019 12

FCC SUPPLIERS DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) The following equipment:

Product

: Mobile Computer Trade name : Datalogic Model Number

: MEMOR K Its herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. The result of electromagnetic emission has been evaluated by DEKRA EMC laboratory and showed in the test report. (Report No.: 2040625R-IT-US-P01V01) It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following responsible party designated in FCC 2.909 is responsible for this declaration:

Company Name Datalogic USA, Inc. Company Address 959 Terry Street, Eugene, Oregon 97402 Telephone 541 683-5700 Facsimile :541 -345-7140 Ken Wyman Name (Full name ) Product Regulatory Engineer Position / Title July 08, 2020 Date Legal Datalogic USA, Inc. 959 Terry Street | Eugene | OR 97402 | United States of America Tel. (1) 541-683-5700 | Fax. (1) 541-345-7140 | www.datalogic.com