Datalogic S.r.l. Via San Vitalino 13 40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 2022 Datalogic S.p.A. and/or its affiliates All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro-
duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and tran-
smit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publi-
cations, please let us know via the "Contact" page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-
rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice. Trademarks Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. The Joya logo is a trademark of Datalogic S.p.A. and/or its affiliates, registered in the U.S. and the E.U. All other trademarks and brands are property of their respective owners. Patents See www.patents.datalogic.com for patent list. This product is covered by one or more of the following patents:
Design patents: EP002703025, EP002805218, ZL201530463613.4 Utility patents: EP0789315B1, EP0895175B1, EP0996284B1, EP0999514B1, EP1114390B1, EP1128315B1, EP1172756B1, EP1396811B1, EP1413971B1, EP1804089B1, EP1828957B1, EP2275966B1, EP2315156B1, EP2517148B1, EP2649555B1, JP4435343B2, JP5192390B2, US5992740, US6305606, US6478224, US6512218, US6513714, US6561427, US6808114, US6877664, US6997385, US7053954, US7234641, US7387246, US7620475, US8113430, US8245926, US8888003, US8915443, ZL200680050007.8, ZL200980163411.X. NOTE: Read carefully the JOYA TOUCH 22 User Manual (available at www.datalogic. com) before performing any type of connection to the JOYA TOUCH 22. The user is responsible for any damage caused by incorrect use of the equipment or by inobservance of the indication supplied in the user manual. CLEANING INSTRUCTIONS Periodically clean the JOYA TOUCH 22 device using a soft cloth slightly dampened with only water or Isopropyl Alcohol (70%). Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, sol-
vents) or abrasive pads to clean the device. Do not spray or pour liquids directly onto the device. The device is not water resistant. Keep it dry. JOYA TOUCH 22 SAFETY & REGULATORY ADDENDUM GENERAL SAFETY RULES CAUTION:
Before using the devices and the battery packs, read this Addendum carefully. Use only the components and accessories supplied by the manufacturer for the specific JOYA TOUCH 22 being used. Do not attempt to disassemble the JOYA TOUCH 22 device, as it does not contain parts that can be repaired by the user. Any tampering will invalidate the warranty. When replacing the battery pack or at the end of the operative life of the JOYA TOUCH 22 device, disposal must be performed in compliance with the laws in force in your jurisdiction. Do not submerge the JOYA TOUCH 22 in liquid products. For further information or support, refer to the Datalogic web site: www.datalogic.com. CAUTION:
Do not apply any sticker to the JOYA TOUCH 22. Multi-Purpose Device for Retail 2022 Datalogic S.p.A. and/or its affiliates All rights reserved Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. This document is an addendum to the Quick Start Guide (QSG) for this product. See the QSG for additional product information. www.datalogic.com 852002141 (Rev. B) October 2022 POWER SUPPLY The device is intended to be supplied by a self-contained rechargeable Lithium Ion battery pack (UL listed LPS/SELV power source) and/or by UL Listed/CSA Certified Power Unit LPS/SELV power source which sup-
plies power directly to the unit via the USB-C connector of the cable. The device could be also used with Certified Accessories (Dock/Cradle) which supply Wireless power. The Dock/Cradle accessories are inten-
ded to be supplied by a UL Listed/CSA Certified Power Unit LPS/SELV rating 12V, min 5A power source which supplies power via the power connector of the cable. Any changes or modifications to equipment, not expressly approved by Datalogic could void the users authority to operate the equipment. BATTERY INFORMATION CAUTION: Do not incinerate, disassemble, short terminals, or expose to high temperature. Risk of fire and explosion. Use specified charger only. Risk of explosion if the battery is replaced by an incorrect type. Dispose of batteries as required by local authorities. By default, the main battery pack is disconnected at the factory to avoid damage due to excessive draining. Rechargeable battery pack is less than half of full charge when delive-
red. Charge the battery pack as indicated in the Quick Start Guide or in the User Manual, before using the JOYA TOUCH 22 device. The battery pack autonomy varies according to many factors, such as the frequency of barcode scanning, RF usage, battery life, storage, envi-
ronmental conditions, etc. Close to the limits of the working temperature, some battery perfor-
mance degradation may occur. The JOYA TOUCH 22 should be charged at an ambient temperature between 0 - 35 C (32 to 95F) to achieve the maximum charging rate. Never charge the device battery in a closed space where excessive heat can build up. As a safety precaution, the battery may stop charging to avoid overheating. The JOYA TOUCH 22 gets warm during charging; this is normal and does not mean a malfunction. Even if the storage temperature range is wider, it is recommended to store the terminal and the batteries at environmental temperature, in order to achieve the longest battery life. CAUTION: Avoid storing batteries for long periods in a state of full charge or very low charge. We recommend charging the battery pack every two to three months to keep its charge at a moderate level to maximize battery life. Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. WARNING: Use only Datalogic approved batteries and accessories for battery charging. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteris usages confor mment aux instructions. CAUTION: Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of any of the docks (see the examples below). BATTERY SAFETY GUIDELINES WARNING: Installing, charging and/or any other action should be done by authorized personnel and following this manual. The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion. Do not place the battery pack in or near a fire or other heat source; do not place the battery pack in direct sunlight, or use or store the battery pack inside unventilated areas in hot weather; do not place the battery pack in microwave ovens, in clothes dryers, in high pressure containers, on induction cook surfaces or similar devices. Doing so may cause the battery pack to generate heat, explode or ignite. Using the battery pack in this manner may also result in a loss of performance and a shortened life expectancy. To power the cradle, use only a Datalogic approved power supply. The use of an alternative power supply will void the product warranty, may cause product damage and may cause heat, an explosion, or fire. The area in which the units are charged should be clear of debris and combustible materials or chemicals. Do not use the battery pack of this terminal to power devices other than this device. Immediately discontinue use of the battery pack if, while using, charging or storing the battery pack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appears abnormal in any other way. WARNING: Do not short-circuit the battery pack contacts connecting the positive terminal and negative terminal. This might happen, for example, when you carry a spare battery pack in your pocket or purse; accidental shortcircuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the contacts of the battery pack (these look like metal strips on the battery pack). Short circuiting the terminals may damage the battery pack or the connecting object. Do not apply voltages to the battery pack contacts. Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts, pressures, or shocks. Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. Do not solder directly onto the battery pack. Do not expose the battery pack to liquids. Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially on a hard surface, you should take it to the nearest Authorised Repair Centre for inspection before continuing to use it. If your device stops working for any reason, do not use its battery on other electronic devices without a prior check and approval by an Authorised Repair Centre. Do not replace the battery pack when the device is turned on. Do not remove or damage the battery packs label. Do not use the battery pack if it is damaged in any part. Battery pack usage by children should be supervised. WIRELESS AND RADIO FREQUENCIES WARNINGS WARNING: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by JOYA TOUCH 22. Datalogic recommends persons with pacemakers or other medical devices to follow the same recommendations provided by Health Industry Manufacturers Associations for mobile phones. Persons with pacemakers:
Should ALWAYS keep this device more than twenty five (25) cm from their pacemaker and/or any other medical device;
Should not carry this device in a breast pocket;
Should keep the device at the opposite side of the pacemaker and/or any other medical device;
Should turn this device OFF or move it immediately AWAY if there is any reason to suspect that interference is taking place. Should ALWAYS read pacemaker or any other medical device guides or should consult the manufacturer of the medical device to determine if it is adequately shielded from external RF energy. In case of doubt concerning the use of wireless devices with an implanted medical device, contact your doctor. Turn this device OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If a vehicles wireless equipment is improperly installed and the air bag inflates, serious injury could result. Turn off the device when in any area with a potentially explosive atmosphere. Observe restrictions and follow closely any laws, regulations, warnings and best practices on the use of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where any operation involves use of explosive materials. Do not store or carry flammable liquids, explosive gases or materials with the device or its parts or accessories. WARNING: Areas with a potentially explosive atmosphere are often, but not always, clearly marked or shown. Sparks in such areas could cause an explosion or fire, resulting in injury or even death. LASER SAFETY The following information applies to Laser Aiming System, used on JOYA TOUCH 22 imager. The laser light is visible to the human eye and is emitted from the window indicated in the figure below. LASER RADIATION - DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT MAX OUTPUT RADIATION 1 mW COMPLIANT WITH EN 60825-1:2014 NOTE: The artwork below may be only a draft. Please refer to the label attached to the product for information about certification marks. Laser Aperture/Ouverture Laser Data Label Laser Warning Label ITALIANO DEUTSCH FRANAIS ESPAOL LA LUCE LASER VISI-
BILE ALLOCCHIO UMANO E VIENE EMESSA DALLA FINESTRA INDICATA NELLA FIGURA. LUCE LASER NON FIS-
SARE IL FASCIO APPARECCHIO LASER DI CLASSE 2 MASSIMA POTENZA DUSCITA: 1 mW LUNGHEZZA DONDA EMESSA: 630~680 nm CONFORME A EN 60825-1 (2007) e EN 60825-1 (2014). DIE LASER-STRAHLUNG IST FR DAS MEN-
SCHLICHE AUGE SICHTBAR UND WIRD AM STRAHLAUS TRITTSFEN-
STER AUSGESENDET
(SIEHE BILD). LASERSTRAHLUNG NICHT IN DEN STRAHL BLICKEN PRODUKT DER LASERKLASSE 2 MAXIMALE AUSGANG-
SLEISTUNG: 1 mW WELLENLGE: 630~680 nm ENTSPR. EN 60825-1
(2007) und EN 60825-1
(2014). LE RAYON LASER EST VISIBLE LOEIL NU ET IL EST MIS PAR LA FENTRE DSIGNE SUR LILLUSTRATION DANS LA FIGURE. A LUZ LSER ES VISIBLE AL OJO HUMANO Y ES EMITIDA POR LA VEN-
TANA INDICADA EN LA FIGURA. RAYON LASER EVITER DE REGARDER LE RAYON APPAREIL LASER DE CLASSE 2 PUISSANCE DE SORTIE: 1 mW LONGUEUR DONDE EMISE: 630~680 nm CONFORME A EN 60825-1 (2007) et EN 60825-1 (2014). RAYO LSER NO MIRAR FIJO EL RAYO APARATO LSER DE CLASE 2 MXIMA POTENCIA DE SALIDA: 1 mW LONGITUD DE ONDA EMITIDA:
630~680 nm CONFORME A EN 60825-1 (2007) y EN 60825-1 (2014). ENGLISH The following information is provided to comply with the rules imposed by international authori-
ties and refers to the correct use of your device. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device. WARNING: Do not attempt to open or otherwise service any components in the optics cavity. Opening or servicing any part of the optics cavity by unauthorized personnel may violate laser safety regulations. The optics system is a factory only repair item. Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light. Use of optical systems with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes, eye glasses and magnifying glasses. ITALIANO Le seguenti informazioni vengono fornite dietro direttive delle autorit internazionali e si riferi-
scono alluso corretto del terminale. NORMATIVE STANDARD PER LA SICUREZZA LASER Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produ-
zione: CDRH 21 CFR 1040 e EN 60825-1. Non si rende mai necessario aprire lapparecchio per motivi di installazione, utilizzo o manuten-
zione. ATTENZIONE: Non tentare di accedere allo scomparto contenete i componenti ottici o di farne la manutenzione. Lapertura dello scomparto, o la manutenzione di qualsiasi parte ottica da parte di personale non autorizzato, potrebbe violare le norme della sicurezza. Il sistema ottico pu essere riparato solamente alla fabbrica. Lutilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione pu provocare unesposizione pericolosa a luce laser visibile. Luso di strumenti ottici assieme allo scanner pu aumentare il pericolo di danno agli occhi. Tali strumenti ottici includono cannocchiali, microscopi, occhiali e lenti di ingrandimento. Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati dalloc-
chio umano in seguito ad una esposizione di breve durata, evitare di fissare il raggio laser cos come si eviterebbe qualsiasi altra sorgente di luminosit intensa, ad esempio il sole. Evitare inol-
tre di dirigere il raggio laser negli occhi di un osservatore, anche attraverso superfici riflettenti come gli specchi. DEUTSCH Die folgenden Informationen stimmen mit den Sicherheitshinweisen berein, die von internatio-
nalen Behrden auferlegt wurden, und sie beziehen sich auf den korrekten Gebrauch vom Termi-
nal. NORM FR DIE LASERSICHERHEIT Dies Produkt entspricht am Tag der Herstellung den gltigen EN 60825-1 und CDRH 21 CFR 1040 Normen fr die Lasersicherheit. Es ist nicht notwendig, das Gert wegen Betrieb oder Installations- und Wartungs-Arbeiten zu ffnen. ACHTUNG: Unter keinen Umstnden darf versucht werden, die Komponenten im Optikhohlraum zu ffnen oder auf irgendwelche andere Weise zu warten. Das ffnen bzw. Warten der Komponenten im Optikhohlraum durch unbefugtes Personal verstt gegen die Laser-Sicherheitsbestimmungen. Das Optiksystem darf nur werkseitig repariert werden. Jegliche nderungen am Gert sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschrieben werden, knnen ein gefhrliches Laserlicht verursachen. Die Verwendung von Optiksystemen mit diesem Scanner erhht die Gefahr einer Augenbeschdigung. Zu optischen Instrumenten gehren unter anderem Fernglser, Mikroskope, Brillen und Vergrerungsglser. Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschden von kurzen Ein-
strahlungen bekannt sind, sollten Sie es vermeiden fr lngere Zeit in den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch gegen reflektierende Oberflchen zu richten. FRANAIS Les informations suivantes sont fournies selon les rgles fixes par les autorits internationales et se rfrent une correcte utilisation du terminal. NORMES DE SECURITE LASER Ce produit est conforme aux normes de scurit laser en vigueur sa date de fabrication: CDRH 21 CFR 1040 et EN 60825-1. Il nest pas ncessaire douvrir lappareil pour linstallation, lutilisation ou lentretien. ATTENTION: Ne pas essayer douvrir ou de rparer les composants de la cavit optique. Louverture de la cavit optique ou la rparation de ses composants par une personne non qualifie peut entraner le nonrespect des rgles de scurit relatives au laser. Le systme optique ne peut tre rpar quen usine. Lutilisation de procdures ou rglages diffrents de ceux donns ici peut entraner une dangereuse exposition lumire laser visible. Lutilisation dinstruments optiques avec le scanneur augmente le danger pour les yeux. Les instruments optiques comprennent les jumelles, les microscopes, les lunettes et les verres grossissants. The product utilizes a low-power laser diode. Although staring directly at the laser beam momen-
tarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through reflective surfaces such as mirrors, etc. Le produit utilise une diode laser. Aucun dommage aux yeux humains na t constat la suite dune exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon vers les yeux dun observa-
teur, mme travers des surfaces rflchissantes (miroirs, par exemple). REACH WARNING Espaol [Spanish]
ESPAOL Las informaciones siguientes son presentadas en conformidad con las disposiciones de las auto-
ridades internacionales y se refieren al uso correcto del terminal. NORMATIVAS ESTNDAR PARA LA SEGURIDAD LSER Este aparato resulta conforme a las normativas vigentes de seguridad lser a la fecha de produc-
cin: CDRH 21 CFR 1040 y EN 60825-1. No es necesario abrir el aparato para la instalacin, la utilizacin o la manutencin. ATENCIN: No intente abrir o de ninguna manera dar servicio a ninguno de los componentes del receptculo ptico. Abrir o dar servicio a las piezas del receptculo ptico por parte del personal no autorizado podra ser una violacin a los reglamentos de seguridad. El sistema ptico se puede reparar en la fbrica solamente. La utilizacin de procedimientos o regulaciones diferentes de aquellas describidas en la documentacin puede causar una exposicin peligrosa a la luz lser visible. El uso de sistemas pticos con el escner aumentar el riesgo de daos oculares. Los instrumentos pticos incluyen binoculares, microscopios, lentes y lupas. No intente abrir o de ninguna manera dar servicio a ninguno de los componentes del receptculo ptico. Abrir o dar servicio a las piezas del receptculo ptico por parte del personal no autorizado podra ser una violacin a los reglamentos de seguridad. El sistema ptico se puede reparar en la fbrica solamente. La utilizacin de procedimientos o regulaciones diferentes de aquellas describidas en la docu-
mentacin puede causar una exposicin peligrosa a la luz lser visible. El uso de sistemas pticos con el escner aumentar el riesgo de daos oculares. Los instrumen-
tos pticos incluyen binoculares, microscopios, lentes y lupas. LED CLASS LED illuminator integrated in the imager engine is classified as EXEMPT RISK GROUP according to IEC62471. WARNING: POGO PIN BP53821 -> #001 Yellow metal part Lead content is 25000ppm WEEE STATEMENT Waste Electrical and Electronic Equipment (WEEE) Statement English For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.datalogic.com. Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.datalogic.com. French Pour toute information relative llimination des dchets lectroniques (WEEE), veuillez consulter le site internet www.datalogic.com. German Informationen zur Entsorgung von Elektro- und Elektronik- Altgerten (WEEE) erhalten Sie auf der Webseite www.datalogic.com. Spanish Si desea informacin acerca de los procedimientos para el desecho de los residuos del equipo elctrico y electrnico (WEEE), visite la pgina Web www.datalogic.com. Portuguese Para informaes sobre a disposio de Sucatagem de Equipamentos Eltricos e Eletrnicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web www.datalogic.com. Chinese
(WEEE) Datalogic www.datalogic.com. MARKING AND EUROPEAN ECONOMIC AREA (EEA) Slovensky [Slovak]
In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system frequencies are correctly set to be compliant with the spectrum requirements of the country. The Radio modules used in this product automatically adapt to the frequencies set by the system and do not require any parameter settings. European Declaration of Compliance Hereby, Datalogic S.r.l. declares that this radio equipment is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is available at: www.datalogic.com. Select the Support & Service > Downloads > Product Certifications link where you can search for your specific product certification. esky [Czech]
Tmto Datalogic S.r.l. prohlauje, e toto rdiov zazen je ve shod se smrnic 2014/53/EU. Dansk [Danish]
Herved erklres Datalogic S.r.l. erklrer, at dette radioudstyr er i overensstemmelse med direktiv 2014/53/EU. Deutsch [German]
Hiermit wird Datalogic S.r.l. erklrt, dass dieses Funkgert der Richtlinie 2014/53/EU entspricht. Eesti [Estonian]
Kesolevaga on Datalogic S.r.l. kinnitab, et see raadioseade on koosklas direktiiviga 2014/53/
EL. Por la presente, Datalogic S.r.l. declara que este equipo de radio cumple con la Directiva 2014/53/
UE.
[Greek]
, Datalogic S.r.l. 2014/53/. Franais [French]
Par la prsente, Datalogic S.r.l. dclare que cet quipement radio est conforme la directive 2014/53/UE. Italiano [Italian]
Con la presente Datalogic S.r.l. dichiara che questa apparecchiatura radio conforme alla Direttiva 2014/53/UE. Latviski [Latvian]
Ar o Datalogic S.r.l. pazio, ka radioiekrta atbilst Direktvai 2014/53 / ES. Lietuvi [Lithuanian]
iuo dokumentu Datalogic S.r.l.pareikia, kad i radijo ranga atitinka Direktyv 2014/53/ES. Nederlands [Dutch]
Tmto spolonos Datalogic S.r.l. vyhlasuje, e toto rdiov zariadenie je v slade so smernicou 2014/53 / E. Suomi [Finnish]
Datalogic S.r.l. vakuuttaa tten, ett tm radiolaite on direktiivin 2014/53 / EU mukainen. Svenska [Swedish]
Datalogic S.r.l. frklarar hrmed att denna radioutrustning verensstmmer med direktiv 2014/53/EU. UKCA Declaration of Conformity Hereby, Datalogic S.r.l. declares that this radio equipment is in compliance with the Radio Equip-
ment Regulations (RER) (S.I. 2017/1206) and that the full text of the UKCA Declaration of Confor-
mity is available at the following internet address: http://www.datalogic.com. Select the Support
& Service > Downloads > Product Certifications link where you can search for your specific product certification. Information for the User This device is restricted to indoor use when operating in the 5.15 to 5.35 GHz frequency range. RADIO TECHNOLOGIES AND FREQUENCY BANDS (EUROPE) CE Marking Radio Technology Frequency Band Max Radio-Frequency Transmitted Power IEEE 802.11b/g/n
(HT-20, WLAN HT-40) WLAN IEEE 802.11a/n HT-40)/ ac (VHT-20, VHT-40, VHT80)
(HT-20, 2.4GHz Frequency Bands:
2.412 - 2.472 MHZ 5GHz Frequency Bands:
5.180 - 5.240 MHz 5.260 - 5.320 MHz 5.500 - 5.700 MHz WLAN 2.4: 19.98 dBm WLAN 5: 22.92 dBm Bluetooth V5.1 EDR/LE 2402 - 2480 Mhz BR/EDR BLE: 6.64 dBm CAUTION: The device for operation in the band 5150-5350 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. UKCA Marking Hierbij verklaart Datalogic S.r.l. dat deze radioapparatuur voldoet aan Richtlijn 2014/53/EU. Radio Equipment Specification Table Malti [Maltese]
Hawnhekk, Datalogic S.r.l. tiddikjara li dan it-tagmir tar-radju huwa konformi mad-Direttiva 2014/53/UE. Magyar [Hungarian]
A Datalogic S.r.l. kijelenti, hogy ez a rdiberendezs megfelel a 2014/53/EU irnyelvnek. Polski [Polish]
Niniejszym Datalogic S.r.l. owiadcza, e to urzdzenie radiowe jest zgodne z Dyrektyw 2014/53/
UE. Portugus [Portuguese]
Por meio deste, a Datalogic S.r.l. declara que este equipamento de rdio est em conformidade com a Diretiva 2014/53/UE. Low Frequency MHz High Frequency MHz Rated RF Power Output W 2400 2401 5150 5250 5470 13.56 0.13 2483.5 2483 5250 5350 5725 13.56 0.13 6.64 dBm 19.98 dBm 22.92 dBm N/A N/A Japanese
(WEEE)Datalogic www.datalogic.com
. Slovensko [Slovenian]
Datalogic S.r.l. izjavlja, da je ta radijska oprema v skladu z Direktivo 2014/53/EU. FCC/IC LABELING Handheld variants with WLAN+BT radios Pistol Grip variants with WLAN+BT radios To display the FCC/IC label on the device, do the following steps:
FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause unde-
sired operation. NOTICE:
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. Changes or modifications made to this equipment not expressly approved by Datalogic S.r.l. may void the FCC authorization to operate this equipment. STEP 1 - Tap the Settings icon:
STEP 2 - Tap the About phone option:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio/TV technician for help. STEP 3 - Tap the Regulatory labels option:
RESULT #1: ELECTRONIC LABEL
(for GUN Variant case) ISED COMPLIANCE NOTICE:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause unde-
sired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouil-
lage est susceptible den compromettre le fonctionnement. RESULT #2: ELECTRONIC LABEL
(for HANDHELD Variant case) CAUTION
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the poten-
tial for harmful interference to cochannel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-
5350MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. AVERTISSEMENT:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. RADIO TECHNOLOGIES AND FREQUENCY BANDS (USA AND CANADA) Radio Technology Frequency Bands WiFi WLAN IEEE 802.11b/g/n (HT-20, HT-40) WLAN IEEE 802.11a/n (HT-20, HT-40)/ ac (VHT-20, VHT-40, VHT80) 2.4GHz Frequency Bands:
2.412 - 2.462 MHZ 5GHz Frequency Bands:
5.180 5.240 MHz 5.260 5.320 MHz 5.500 5.700 MHz, 5.720 MHz 5.735 5.825 MHz Bluetoothe V5.1 EDR/LE 2402-2480 Mhz RADIO FREQUENCY EXPOSURE INFORMATION The JOYA TOUCH 22 is designed to be held by the End User hands and carried close to the End User body only using the belt holster accessory. The JOYA TOUCH 22 is equipped by loudspeaker only, thus it is designed for VoIP calls on loudspe-
aker only and far away from the users head. CE SAR Compliance The JOYA TOUCH 22 complies with CE SAR limits for general population/uncontrolled expo-
sure specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines and RED (Directive 2014/53/EU). The JOYA TOUCH 22 has been tested for handheld and typical body-worn use (0mm distance from the body, using a belt holster), according to EN 50360:2017, EN50566:2017, EN 62311: 2020, EN 50665:2017, EN 62479:2010, EN 50663:2017 and EN 62209-2:2010. For body-worn use the device must be properly held in the Datalogic genuine holster. In order to meet the CE SAR Compliance, only genuine Datalogic Belt Holster for JOYA TOUCH 22 must be used. The use of third-party holsters (or similar accessories) may not comply with CE SAR compliance requirements, thus should be avoided. The genuine Datalogic belt holster must be properly worn, so that the JOYA TOUCH 22 faces to the end user body its front (display) side or its back (battery) side. Refer to https://www.datalogic.com for JOYA TOUCH 22 genuine holster and accessories. FCC/ISED SAR Compliance The JOYA TOUCH 22 complies with the FCC SAR limits specified in the FCC 47 CFR part2 (2.1093) and ANSI/IEEE C95.1- 1992, and it complies with the ISED SAR limits specified in ISED RSS-102 Issue 5 (2015). The JOYA TOUCH 22 has been tested for handheld and typical body-worn use (0mm distance from the body, using a belt holster), according to the specific SAR testing method referred at the Display Exhibits section of https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm, filling the FCC IDs specified in the FCC/IC labeling section of this Addendum. In order to meet the FCC/ISED SAR Compliance, only genuine Datalogic Belt Holster for JOYA TOUCH 22 must be used. The use of third-party holsters (or similar accessories) may not comply with FCC/ISED SAR compliance requirements, thus should be avoided. The genuine Datalogic holster must be properly worn, so that the JOYA TOUCH 22 faces to the end user body its front (display) side or its back (battery) side. Refer to https://www.datalogic.com for JOYA TOUCH 22 genuine holster and accessories. Cet quipement peut tre utilis dans votres mains. Cet quipement peut tre utilis et install une distance minimale de 0mm entre le radiateur et votres corps seulement avec le Belt Holster accessoire pour JOYA TOUCH 22. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. La operacin de este equipo est sujeta a las siguientes dos condiciones. 1. Es posible que este equipo o dispositivo no cause interferencia perjudicial. 2. Este equipo o dispositivo debe aceptar cualquier interferencia. Incluyendo la que pueda causar su operacin no deseada. ISM 5000