Datalogic S.r.l. Via San Vitalino 13 40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 2020 Datalogic S.p.A. and/or its affiliates All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro-
duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and tran-
smit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publi-
cations, please let us know via the "Contact" page. Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-
rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Skorpio is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. Disclaimer Trademarks Patents See www.patents.datalogic.com for patent list. Skorpio X5 - 1D Imager This product is covered by one or more of the following patents:
Design patents: EP002696088, USD805078, USD830362, ZL201530439997.6 Utility patents: EP1797521B1, EP2649555B1, IT1396943, US10204248, US6808114, US6997385, US7387246, US7506816, US8888003, ZL201080071124.9. Skorpio X5 - 2D Imager This product is covered by one or more of the following patents:
Design patents: EP002421560, USD737822, USD779491, ZL201430286638.7 Utility patents: EP1172756B1, EP1804089B1, EP1825417B1, EP1828957B1, EP2315156B1, EP2517148B1, EP2649555B1, IT1396943, JP5192390B2, US6808114, US6877664, US6997385, US7234641, US7387246, US7721966, US8113430, US8245926, US8561906, US8888003, US8915443, US9430689, US9798948, ZL200680050007.8, ZL200980163411.X, ZL201080071124.9. CCC. CLEANING INSTRUCTIONS Periodically clean the Skorpio X5 device using a soft cloth slightly dampened with only water or Isopropyl Alcohol (70%). Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, sol-
vents) or abrasive pads to clean the device. SKORPIO X5 SAFETY & REGULATORY ADDENDUM Rugged Mobile Computer with 1D/2D Imager 2020 Datalogic S.p.A. and/or its affiliates All rights reserved Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. This document is an addendum to the Quick Start Guide (QSG) for this product. See the QSG for additional product information. www.datalogic.com 852001730 (Rev. A) October 2020 GENERAL SAFETY RULES NOTE: Read carefully the Skorpio X5 User Manual
(available at www.datalogic.com) before performing any type of connection to the Skorpio X5. The user is responsible for any damage caused by incorrect use of the equipment or by inobservance of the indication supplied in the user manual. CAUTION:
Before using the devices and the battery packs, read this Addendum carefully. Use only the components and accessories supplied by the manufacturer for the specific Skorpio X5 being used. Do not attempt to disassemble the Skorpio X5 device, as it does not contain parts that can be repaired by the user. Any tampering will invalidate the warranty. When replacing the battery pack or at the end of the operative life of the Skorpio X5 device, disposal must be performed in compliance with the laws in force in your jurisdiction. Do not submerge the Skorpio X5 in liquid products. For further information or support, refer to the Datalogic web site: www.datalogic.com. POWER SUPPLY The device is intended to be supplied by a self-contained rechargeable Lithium Ion battery pack (UL recognized LPS/PS2/SELV power source) and/or by UL Listed Power Unit LPS/PS2/SELV power source which supplies power directly to the unit via the micro USB connector of the cable. The device could be also used with Certified Accessories (Dock/Cradle). The Dock/Cradle accessories are intended to be supplied by a UL Listed Power Unit LPS/PS2/SELV which supplies power via the power connec-
tor of the cable. Any changes or modifications to equipment, not expressly approved by Datalogic could void the users authority to operate the equipment. BATTERY INFORMATION CAUTION: Do not incinerate, disassemble, short terminals, or expose to high temperature. Risk of fire and explosion. Use specified charger only. Risk of explosion if the battery is replaced by an incorrect type. Dispose of batteries as required by local authorities. By default, the main battery pack is disconnected at the factory to avoid damage due to excessive draining. The rechargeable battery pack is less than half of full charge when deli-
vered. Charge the battery pack as indicated in the Quick Start Guide or in the User Manual, before using the Skorpio X5. The battery pack autonomy varies according to many factors, such as the frequency of barcode scanning, RF usage, battery life, storage, envi-
ronmental conditions, etc. Close to the limits of the working temperature, some battery perfor-
mance degradation may occur. The Skorpio X5 and the spare batteries should be charged at 0C - 40C
(32F 104F) ambient tempera ture range, in order to achieve the maximum charging rate. Never charge the device battery in a closed space where excessive heat can build up. As a safety precaution, the battery may stop charging to avoid overhe-
ating. The Skorpio X5 may get warm during charging; this is normal and does not mean a malfunction. Even if the storage temperature range is wider, it is recommended to store the device and the batteries at environmental temperature, in order to achieve the longest battery life. BATTERY SAFETY GUIDELINES CAUTION: Avoid storing batteries for long periods in a state of full charge or very low charge. We recommend charging the battery pack every two to three months to keep its charge at a moderate level to maximize battery life. Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. WARNING: Use only Datalogic approved batteries and accessories for battery charging. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteris usages confor mment aux instructions. CAUTION: Do not use or leave the product close to heat sources as fire or heater. The device must operate in its operating temperature range. WARNING: Installing, charging and/or any other action should be done by authorized personnel and following this manual. The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion. Do not place the battery pack in or near a fire or other heat source; do not place the battery pack in direct sunlight, or use or store the battery pack inside unventilated areas in hot weather; do not place the battery pack in microwave ovens, in clothes dryers, in high pressure containers, on induction cook surfaces or similar devices. Doing so may cause the battery pack to generate heat, explode or ignite. Using the battery pack in this manner may also result in a loss of performance and a shortened life expectancy. To power the cradle, use only a Datalogic approved power supply. The use of an alternative power supply will void the product warranty, may cause product damage and may cause heat, an explosion, or fire. The area in which the units are charged should be clear of debris and combustible materials or chemicals. Do not use the battery pack of this device to power devices other than this device. Immediately discontinue use of the battery pack if, while using, charging or storing the battery pack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appears abnormal in any other way. Do not short-circuit the battery pack contacts connecting the positive device and negative device. This might happen, for example, when you carry a spare battery pack in your pocket or purse; accidental shortcircuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the contacts of the battery pack (these look like metal strips on the battery pack). Shortcircuiting the devices may damage the battery pack or the connecting object. Do not apply voltages to the battery pack contacts. Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts, pressures, or shocks. WIRELESS AND RADIO FREQUENCIES WARNINGS Patents/Markings Label WARNING: Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. Do not solder directly onto the battery pack. Do not expose the battery pack to liquids. Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially on a hard surface, you should take it to the nearest Authorised Repair Centre for inspection before continuing to use it. If your device stops working for any reason, do not use its battery on other electronic devices without a prior check and approval by an Authorised Repair Centre. Do not replace the battery pack when the device is turned on. Do not remove or damage the battery packs label. Do not use the battery pack if it is damaged in any part. Battery pack usage by children should be supervised. Collect and recycle waste batteries separately from the device in compliance with European Directive 2006/66/EC, 2011/65, 2002/96/EC and subsequent modifications, with US and China regulatory laws and regulations about the environment. Turn off the device when in any area with a potentially explosive atmosphere. Observe restrictions and follow closely any laws, regulations, warnings and best practices on the use of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where any operation involves use of explosive materials. Do not store or carry flammable liquids, explosive gases or materials with the device or its parts or accessories. Areas with a potentially explosive atmosphere are often, but not always, clearly marked or shown. Sparks in such areas could cause an explosion or fire, resulting in injury or even death. WARNING: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Skorpio X5. Datalogic recommends persons with pacemakers or other medical devices to follow the same recommendations provided by Health Industry Manufacturers Associations for mobile phones. Persons with pacemakers:
Should ALWAYS keep this device more than twenty five (25) cm from their pacemaker and/or any other medical device;
Should not carry this device in a breast pocket;
Should keep the device at the opposite side of the pacemaker and/or any other medical device;
Should turn this device OFF or move it immediately AWAY if there is any reason to suspect that interference is taking place. Should ALWAYS read pacemaker or any other medical device guides or should consult the manufacturer of the medical device to determine if it is adequately shielded from external RF energy. In case of doubt concerning the use of wireless devices with an implanted medical device, contact your doctor. Turn this device OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If a vehicles wireless equipment is improperly installed and the air bag inflates, serious injury could result. WARNING: Turn off the device when in any area with a potentially explosive atmosphere. Observe restrictions and follow closely any laws, regulations, warnings and best practices on the use of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where any operation involves use of explosive materials. Do not store or carry flammable liquids, explosive gases or materials with the device or its parts or accessories. Areas with a potentially explosive atmosphere are often, but not always, clearly marked or shown. Sparks in such areas could cause an explosion or fire, resulting in injury or even death. LASER SAFETY The following information applies to Laser Aiming System, used on Skorpio X5 variants with 2D imager. The laser radiation is visible to the human eye and is emitted from the window indicated in the figure below. LASER RADIATION - DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT MAX OUTPUT RADIATION 1 mW COMPLIANT WITH EN 60825-1 (2007) and EN 60825-1 (2014) NOTE: The artwork below may be only a draft. Please refer to the label attached to the product for information about certification marks. Laser Aperture/Ouverture Laser Laser Label Data Label ITALIANO DEUTSCH FRANAIS ESPAOL LA LUCE LASER VISI-
BILE ALLOCCHIO UMANO E VIENE EMESSA DALLA FINESTRA INDICATA NELLA FIGURA. LUCE LASER NON FIS-
SARE IL FASCIO APPARECCHIO LASER DI CLASSE 2 MASSIMA POTENZA DUSCITA: 1 mW LUNGHEZZA DONDA EMESSA: 630~680 nm CONFORME A EN 60825-1 (2007) e EN 60825-1 (2014). DIE LASER-STRAHLUNG IST FR DAS MEN-
SCHLICHE AUGE SICHTBAR UND WIRD AM STRAHLAUS TRITTSFEN-
STER AUSGESENDET
(SIEHE BILD). LASERSTRAHLUNG NICHT IN DEN STRAHL BLICKEN PRODUKT DER LASERKLASSE 2 MAXIMALE AUSGANG-
SLEISTUNG: 1 mW WELLENLGE: 630~680 nm ENTSPR. EN 60825-1
(2007) und EN 60825-1
(2014). LE RAYON LASER EST VISIBLE LOEIL NU ET IL EST MIS PAR LA FENTRE DSIGNE SUR LILLUSTRATION DANS LA FIGURE. A LUZ LSER ES VISIBLE AL OJO HUMANO Y ES EMITIDA POR LA VEN-
TANA INDICADA EN LA FIGURA. RAYON LASER EVITER DE REGARDER LE RAYON APPAREIL LASER DE CLASSE 2 PUISSANCE DE SORTIE: 1 mW LONGUEUR DONDE EMISE: 630~680 nm CONFORME A EN 60825-1 (2007) et EN 60825-1 (2014). RAYO LSER NO MIRAR FIJO EL RAYO APARATO LSER DE CLASE 2 MXIMA POTENCIA DE SALIDA: 1 mW LONGITUD DE ONDA EMITIDA:
630~680 nm CONFORME A EN 60825-1 (2007) y EN 60825-1 (2014). ENGLISH The following information is provided to comply with the rules imposed by international authori-
ties and refers to the correct use of your device. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040.10, CFR 1040.11 and EN 60825-1 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device. WARNING: Do not attempt to open or otherwise service any components in the optics cavity. Opening or servicing any part of the optics cavity by unauthorized personnel may violate laser safety regulations. The optics system is a factory only repair item. Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light. Use of optical systems with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes, eye glasses and magnifying glasses. The product utilizes a low-power laser diode. Although staring directly at the laser beam momen-
tarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through reflective surfaces such as mirrors, etc. ITALIANO Le seguenti informazioni vengono fornite dietro direttive delle autorit internazionali e si riferi-
scono alluso corretto del terminale. NORMATIVE STANDARD PER LA SICUREZZA LASER Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produ-
zione: CDRH 21 CFR 1040.10, CFR 1040.11 e EN 60825-1. Non si rende mai necessario aprire lapparecchio per motivi di installazione, utilizzo o manuten-
zione. ATTENZIONE: Non tentare di accedere allo scomparto contenete i componenti ottici o di farne la manutenzione. Lapertura dello scomparto, o la manutenzione di qualsiasi parte ottica da parte di personale non autorizzato, potrebbe violare le norme della sicurezza. Il sistema ottico pu essere riparato solamente alla fabbrica. Lutilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione pu provocare unesposizione pericolosa a luce laser visibile. Luso di strumenti ottici assieme allo scanner pu aumentare il pericolo di danno agli occhi. Tali strumenti ottici includono cannocchiali, microscopi, occhiali e lenti di ingrandimento. Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati dalloc-
chio umano in seguito ad una esposizione di breve durata, evitare di fissare il raggio laser cos come si eviterebbe qualsiasi altra sorgente di luminosit intensa, ad esempio il sole. Evitare inol-
tre di dirigere il raggio laser negli occhi di un osservatore, anche attraverso superfici riflettenti come gli specchi. DEUTSCH Die folgenden Informationen stimmen mit den Sicherheitshinweisen berein, die von internatio-
nalen Behrden auferlegt wurden, und sie beziehen sich auf den korrekten Gebrauch vom Termi-
nal. NORM FR DIE LASERSICHERHEIT Dies Produkt entspricht am Tag der Herstellung den gltigen EN 60825-1 und CDRH 21 CFR 1040.10, CFR 1040.11 Normen fr die Lasersicherheit. Es ist nicht notwendig, das Gert wegen Betrieb oder Installations- und Wartungs-Arbeiten zu ffnen. ACHTUNG: Unter keinen Umstnden darf versucht werden, die Komponenten im Optikhohlraum zu ffnen oder auf irgendwelche andere Weise zu warten. Das ffnen bzw. Warten der Komponenten im Optikhohlraum durch unbefugtes Personal verstt gegen die Laser-Sicherheitsbestimmungen. Das Optiksystem darf nur werkseitig repariert werden. Jegliche nderungen am Gert sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschrieben werden, knnen ein gefhrliches Laserlicht verursachen. Die Verwendung von Optiksystemen mit diesem Scanner erhht die Gefahr einer Augenbeschdigung. Zu optischen Instrumenten gehren unter anderem Fernglser, Mikroskope, Brillen und Vergrerungsglser. Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschden von kurzen Ein-
strahlungen bekannt sind, sollten Sie es vermeiden fr lngere Zeit in den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch gegen reflektierende Oberflchen zu richten. FRANAIS Les informations suivantes sont fournies selon les rgles fixes par les autorits internationales et se rfrent une correcte utilisation du terminal. NORMES DE SECURITE LASER Ce produit est conforme aux normes de scurit laser en vigueur sa date de fabrication: CDRH 21 CFR 1040.10, CFR 1040.11 et EN 60825-1. Il nest pas ncessaire douvrir lappareil pour linstallation, lutilisation ou lentretien. ATTENTION: Ne pas essayer douvrir ou de rparer les composants de la cavit optique. Louverture de la cavit optique ou la rparation de ses composants par une personne non qualifie peut entraner le nonrespect des rgles de scurit relatives au laser. Le systme optique ne peut tre rpar quen usine. Lutilisation de procdures ou rglages diffrents de ceux donns ici peut entraner une dangereuse exposition lumire laser visible. Lutilisation dinstruments optiques avec le scanneur augmente le danger pour les yeux. Les instruments optiques comprennent les jumelles, les microscopes, les lunettes et les verres grossissants. Le produit utilise une diode laser. Aucun dommage aux yeux humains na t constat la suite dune exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon vers les yeux dun observa-
teur, mme travers des surfaces rflchissantes (miroirs, par exemple). ESPAOL Las informaciones siguientes son presentadas en conformidad con las disposiciones de las auto-
ridades internacionales y se refieren al uso correcto del terminal. NORMATIVAS ESTNDAR PARA LA SEGURIDAD LSER Este aparato resulta conforme a las normativas vigentes de seguridad lser a la fecha de produc-
cin: CDRH 21 CFR 1040.10, CFR 1040.11 y EN 60825-1. No es necesario abrir el aparato para la instalacin, la utilizacin o la manutencin. ATENCIN: No intente abrir o de ninguna manera dar servicio a ninguno de los componentes del receptculo ptico. Abrir o dar servicio a las piezas del receptculo ptico por parte del personal no autorizado podra ser una violacin a los reglamentos de seguridad. El sistema ptico se puede reparar en la fbrica solamente. La utilizacin de procedimientos o regulaciones diferentes de aquellas describidas en la documentacin puede causar una exposicin peligrosa a la luz lser visible. El uso de sistemas pticos con el escner aumentar el riesgo de daos oculares. Los instrumentos pticos incluyen binoculares, microscopios, lentes y lupas. No intente abrir o de ninguna manera dar servicio a ninguno de los componentes del receptculo ptico. Abrir o dar servicio a las piezas del receptculo ptico por parte del personal no autorizado podra ser una violacin a los reglamentos de seguridad. El sistema ptico se puede reparar en la fbrica solamente. La utilizacin de procedimientos o regulaciones diferentes de aquellas describidas en la docu-
mentacin puede causar una exposicin peligrosa a la luz lser visible. El uso de sistemas pticos con el escner aumentar el riesgo de daos oculares. Los instrumen-
tos pticos incluyen binoculares, microscopios, lentes y lupas. Datalogic S.r.l. tmto prohlauje, e tento SKORPIO X5 je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 2014/53/EU - 2011/65/EU. Undertegnede Datalogic S.r.l. erklrer herved, at flgende udstyr SKORPIO X5 overholder de vsentlige krav og vrige relevante krav i direktiv 2014/53/EU - 2011/65/EU. Hiermit erklrt Datalogic S.r.l., dass sich das Gert SKORPIO X5 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 2014/53/EU - 2011/65/EU befindet. Kesolevaga kinnitab Datalogic S.r.l. seadme SKORPIO X5 vastavust direktiivi 2014/53/EU -
2011/65/EU phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Por medio de la presente Datalogic S.r.l. declara que el SKORPIO X5 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU -
2011/65/EU. Datalogic S.r.l. SKORPIO X5 2014/53/EU -
2011/65/EU. Par la prsente Datalogic S.r.l. dclare que lappareil SKORPIO X5 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU - 2011/65/EU. esky [Czech]
Dansk [Danish]
Deutsch [German]
Eesti [Estonian]
Espaol [Spanish]
[Greek]
Franais [French]
Italiano [Italian]
Latviski [Latvian]
Ar o Datalogic S.r.l. deklar, ka SKORPIO X5 atbilst Direktvas 2014/53/EU - 2011/65/EU btis-
kajm prasbm un citiem ar to saisttajiem noteikumiem. iuo Datalogic S.r.l. deklaruoja, kad is SKORPIO X5 atitinka esminius reikalavimus ir kitas 2014/53/EU - 2011/65/EU Direktyvos nuostatas. Hierbij verklaart Datalogic S.r.l. dat het toestel SKORPIO X5 in overeenstemming is met de essen-
tile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU - 2011/65/EU. Hawnhekk, Datalogic S.r.l., jiddikjara li dan SKORPIO X5 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 2014/53/EU - 2011/65/EU. LED CLASS LED illuminators integrated in the 1D and 2D imager are classified as EXEMPT RISK GROUP according to IEC62471. Alulrott, Datalogic S.r.l. nyilatkozom, hogy a SKORPIO X5 megfelel a vonatkoz alapvet kvet-
elmnyeknek s az 2014/53/EU - 2011/65/EU irnyelv egyb elrsainak. MARKING AND EUROPEAN ECONOMIC AREA (EEA) Niniejszym Datalogic S.r.l. owiadcza, e SKORPIO X5 jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 2014/53/EU - 2011/65/EU. In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system frequencies are correctly set to be compliant with the spectrum requirements of the country. The Radio modules used in this product automatically adapt to the frequencies set by the system and do not require any parameter settings. Statement of Compliance Hereby, Datalogic S.r.l. declares that the radio equipment type SKORPIO X5 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.datalogic.com. Datalogic S.r.l. declara que este SKORPIO X5 est conforme com os requisitos essenciais e outras disposies da Directiva 2014/53/EU - 2011/65/EU. Datalogic S.r.l. izjavlja, da je ta SKORPIO X5 v skladu z bistvenimi zahtevami in ostalimi relevant-
nimi doloili direktive 2014/53/EU - 2011/65/EU. Datalogic S.r.l. tmto vyhlasuje, e SKORPIO X5 spa zkladn poiadavky a vetky prslun ustanovenia Smernice 2014/53/EU - 2011/65/EU. Datalogic S.r.l. vakuuttaa tten ett SKORPIO X5 tyyppinen laite on direktiivin 2014/53/EU -
2011/65/EU oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Lietuvi [Lithuanian]
Nederlands [Dutch]
Malti [Maltese]
Magyar [Hungarian]
Polski [Polish]
Portugus [Portuguese]
Slovensko [Slovenian]
Slovensky [Slovak]
Suomi [Finnish]
Svenska [Swedish]
Hrmed intygar Datalogic S.r.l. att denna SKORPIO X5 str I verensstmmelse med de vsentl-
iga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 2014/53/EU -
2011/65/EU. RADIO TECHNOLOGIES AND FREQUENCY BANDS (EUROPE) Radio Technology Frequency Band Maximum Transmitted Power WiFi Bluetooth RFID/NFC 2400 2472 MHz 5150 5350 MHz 5470 5725MHz 2400 2483.5 MHz 19.96 dBm (EIRP) 22.77 dBm (EIRP) 22.93 dBm (EIRP) 6.44 dBm (EIRP) 13.56 MHz
-6,89 dBuA/m at 10m This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. AT EE IT PT IS BE FI LV RO LI BG FR LT SK NO HR DE LU SI CH CY EL MT ES TR CZ HU NL SE DK IE PL UK Information for the User At the end of its useful life, the product marked with the crossed out wheeled wastebin must be disposed of separately from urban waste. For more detailed information about disposal, contact the supplier that provided you with the product in que-
stion or consult the dedicated section at the website http://www.datalogic.com. Informazione per gli utenti Lapparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani. Per maggiori dettagli sulle modalit di smaltimento, contattare il Fornitore dal quale stata acquistata lap-
parecchiatura o consultare la sezione dedicata sul sito http://www.datalogic.com. Information aux utilisateurs Au terme de sa vie utile, le produit qui porte le symbole dun caisson ordures barr ne doit pas tre limin avec les dchets urbains. Pour obtenir des informations complmentaires concernant llimination, veuillez contacter le fournisseur auprs duquel vous avez achet le produit ou consulter la section consacre au site web http://www.datalogic. com. Benutzerinformation bezglich Am Ende des Gertelebenszyklus darf das Produkt nicht ber den stdtischen Hausmll entsorgt werden. Eine entsprechende Mlltrennung ist erforderlich. Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten ber den sie das Produkt erwor-
ben haben, oder besuchen sie unsere Hompage unter http://www.datalogic.com. Informacin para el usuario Al final de su vida til, el producto marcado con un simbolo de contenedor de bassura mvil tachado no debe eliminarse junto a los desechos urbanos. Para obtener una informacin ms detallada sobre la eliminacin, por favor, pngase en contacto con el pro-
veedor donde lo compr o consultar la seccin dedicada en el Web site http://www.datalogic.com. Con la presente Datalogic S.r.l. dichiara che questo SKORPIO X5 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/53/EU - 2011/65/EU. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) FCC/IC LABELING Handheld Variants Pistol Grip Variants FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause unde-
sired operation. NOTICE:
NOTE:
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. Changes or modifications made to this equipment not expressly approved by Datalogic S.r.l. may void the FCC authorization to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio/TV technician for help. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter expect those approved under the filing. For product available in the USA/Canada market, only channel 1~11 WLAN 2.4 GHz can be opera-
ted. No additional channels are supported in WLAN 2.4 GHz. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-
ment. End user must follow the specific operating instructions for satisfying RF exposure com-
pliance. ISED COMPLIANCE NOTICE:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause unde-
sired operation. Le present appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorisee aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouil-
lage est susceptible den compromettre le fonctionnement. CAUTION
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-
5350MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. AVERTISSEMENT:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont reserves uniquement pour une utilisation a linterieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux;
(ii) les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-d., quils ont la priorite) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. CAN ICES-003 (B)/NMB-003(B) Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits pour WLAN 2.4 GHz. La slection dautres canaux nest pas possible. RADIO TECHNOLOGIES AND FREQUENCY BANDS (USA AND CANADA) Radio Technology Frequency Band WiFi Bluetooth RFID/NFC 2400 2462 MHz 5150 5350 MHz 5470 5725MHz 5.735 5.825 MHz 2400 2483.5 MHz 13.56 MHz RADIO FREQUENCY EXPOSURE INFORMATION The SKORPIO X5 is designed to be held by the End User hands and carried close to the End User body only using the belt holster accessory. CAUTION: The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CE SAR COMPLIANCE The Skorpio X5 complies with CE SAR limits for general population/uncontrolled exposure spe-
cified in Council Recommendation 1999/519/EC, ICNIRP Guidelines and RED (Directive 2014/53/
EU). CE SAR Values y Body-worn= 0,242 W/Kg at 10g (for body-worn use the device must be properly held in the Datalogic genuine holster) y Limbs=0,712 W/Kg at 10g The Skorpio X5 has been tested for handheld and typical body-worn use (0mm distance from the body, using a belt holster), according to EN 50360:2017, EN50566:2017, EN 62311: 2020, EN 50665:2017, EN 62479:2010, EN 50663:2017 and EN 62209-2:2010. In order to meet the CE SAR Compliance, only genuine Datalogic Skorpio X5 Belt Holster must be used. The use of third-party holsters (or similar accessories) may not comply with CE SAR compliance requirements, thus should be avoided. The genuine Datalogic belt holster must be properly worn, so that the Skorpio X5 faces to the end user body its front (display) side or its back (battery) side. Refer to https://www.datalogic.com for Skorpio X5 genuine holster and accessories. FCC/ISED SAR COMPLIANCE The Skorpio X5 complies with the FCC SAR limits specified in the FCC 47 CFR part2 (2.1093) and ANSI/IEEE C95.1-1992, and complies with the ISED SAR limits specified in ISED RSS-102 Issue 5 (2015). FCC/ ISED SAR Values y Body-worn= 1,19 W/Kg at 1g (for body-worn use the device must be properly held in the
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the poten-
tial for harmful interference to cochannel mobile satellite systems;
Datalogic genuine holster) y Limbs=1,98 W/Kg at 10g The Skorpio X5 has been tested for handheld and typical body-worn use (0mm distance from the body, using a belt holster), according to the specific SAR testing method referred at the Display Exhibits section of https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm, filling the FCC IDs specified in the FCC/IC labeling section of this Addendum. In order to meet the FCC/ISED SAR Compliance, only genuine Datalogic Skorpio X5 Belt Holster must be used. The use of third-party holsters (or similar accessories) may not comply with FCC/
ISED SAR compliance requirements, thus should be avoided. The genuine Datalogic holster must be properly worn, so that the Skorpio X5 faces to the end user body its front (display) side or its back (battery) side. Refer to https://www.datalogic.com for Skorpio X5 genuine holster and accessories. Cet quipement peut tre utilis dans votres mains. Cet quipement peut tre utilis et install une distance minimale de 0mm entre le radiateur et votres corps seulement avec le SKORPIO X5 Belt Hoslter accessoire. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. La operacin de este equipo est sujeta a las siguientes dos condiciones. 1. Es posible que este equipo o dispositivo no cause interferencia perjudicial. 2. Este equipo o dispositivo debe aceptar cualquier interferencia. Incluyendo la que pueda causar su operacin no deseada. ISM 5000 Datalogic S.r.l. Via San Vitalino 13 40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 2020 Datalogic S.p.A. and/or its affiliates w All rights reserved. w Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchasers own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Skorpio is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. Patents See www.patents.datalogic.com for patent list. Reference Documentation For further information regarding the Skorpio X5 refer to the SDK Help on-line, downloadable from our developer portal: https://developer.datalogic.com/mobile-computers. Support Through the Website Datalogic provides several services as well as technical support through its website. Log on to www.datalogic.com. For quick access, from the home page click on the search icon , and type in the name of the product youre looking for. This allows you access to download Data Sheets, Manuals, Software & Utilities, and Drawings. Hover over the Support & Service menu for access to Services and Technical Support. Warranty Terms and Conditions The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable etc.) from date of purchase at our company. Out of the Box Top View Skorpio X5 Rugged Mobile Computer with 1D/2D Imager The Skorpio X5 package contains:
y Skorpio X5 Device y Rechargeable one-piece battery pack y USB Type-C to Type A cable y Handstrap (Handheld Models Only) y Lanyard (Pistol Grip Models Only) y Quick Start Guide y Safety & Regulatory Addendum y End User License Agreement (EULA) Sheet Remove all the components from their packaging; check their integrity and compare them with all the packing documents. Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty. CAUTION General View Front View Charging/
Status LED Good Read Indicator Power Button Left Trigger USB Rubber Door and USB Type-C Port Right Trigger Data Capture Window Side View Bottom View Touch Panel Display Front Scan Key Keyboard Quick Start Guide 822003920 (Rev. A) March 2020 See the Safety & Regulatory Addendum included with your product for additional regulatory, safety and legal information. its 2020 Datalogic S.p.A. and/or affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. www.datalogic.com Trigger Button (for use with the optional pistol trigger) Charging Dock Connector
(wired models only) Battery Installation Insert the battery pack into the slot, top first, and press it into place until it clicks:
Back View Rear Camera LED Flash Handstrap Eyelet MicroSD Card Slot
(under battery) Charging Instructions The battery pack is not initially fully charged. After installing the battery, charge it with the Datalogic USB Type-C wall adapter or with a dock. During the charging process the charging LED positioned at the top left side of the display glows red constantly. Once the charging process has been completed, the charging LED glows green constantly. Charge with USB Use the provided USB Type-C cable in conjunction with the Datalogic USB Type-C wall adapter to charge the device from a power outlet. Scanning and Imaging 2D Imager Data Capture To scan a bar code symbol:
1. Point the scan window at the bar code. 2. Press one of the scan triggers. The imager projects a laser aiming pattern that is used to position the barcode or object within the field of view. 3. Center the symbol in any orientation within the aiming pattern. Ensure the entire symbol is within the rectangular area formed by the brackets in the aiming pattern, then either wait for the timeout or release the Scan Key to capture the image. A red beam illuminates the symbol, which is captured and decoded. If the scan has been successful:
y y y If enabled, the good read beep plays. If enabled, the GreenSpot projects a green spot onto the bar code image. If enabled, the good read indicator positioned at the top left side of the display glows solid green. You can also use the supplied Type-C cable to charge the Skorpio X5 from any self-powered USB hub or USB port on a computer. Use only the Datalogic power supply 943500051 SKORPIO X5 USB TYPE-C WALL ADAPTER to power the Skorpio X5. CAUTION Charge with the Dock Insert the device into the dock with the screen facing front and the head facing up. Linear Bar Code 2D Matrix Symbol Relative Size and Location of Aiming System Pattern Use only a Datalogic approved power supply to power any of the docks. Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of any of the wireless docks. Do not apply any sticker to the Skorpio X5 (see the examples below). CAUTION No Clip No Coin No Sticker No Sticker The Skorpio X5 may get warm during charging. This is normal and does not mean a malfunction. For information on the docks, refer to the Quick Start Guide included in the dock's box. NOTE Datalogic S.r.l. Via San Vitalino 13 40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 2020 Datalogic S.p.A. and/or its affiliates All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro-
duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and tran-
smit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publi-
cations, please let us know via the "Contact" page. Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-
rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice. Disclaimer Trademarks Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Skorpio is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) Information for the User At the end of its useful life, the product marked with the crossed out wheeled wastebin must be disposed of separately from urban waste. For more detailed information about disposal, contact the supplier that provided you with the product in question or consult the dedicated section at the website http://www.datalogic.com. Informazione per gli utenti Lapparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani. Per maggiori dettagli sulle modalit di smaltimento, contattare il Fornitore dal quale stata acquistata lap-
parecchiatura o consultare la sezione dedicata sul sito http://www.datalogic.com. Information aux utilisateurs Au terme de sa vie utile, le produit qui porte le symbole dun caisson ordures barr ne doit pas tre limin avec les dchets urbains. Pour obtenir des informations complmentaires concernant llimination, veuillez contacter le fournisseur auprs duquel vous avez achet le produit ou consulter la section consacre au site web http://www.data-
logic.com. Benutzerinformation bezglich Am Ende des Gertelebenszyklus darf das Produkt nicht ber den stdtischen Hausmll entsorgt werden. Eine entsprechende Mlltrennung ist erforderlich. Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten ber den sie das Produkt erworben haben, oder besuchen sie unsere Hompage unter http://www.datalogic.com. Informacin para el usuario Al final de su vida til, el producto marcado con un simbolo de contenedor de bassura mvil tachado no debe eliminarse junto a los desechos urbanos. Para obtener una informacin ms detallada sobre la eliminacin, por favor, pngase en contacto con el pro-
veedor donde lo compr o consultar la seccin dedicada en el Web site http://www.datalogic.com. SKORPIO X5 SAFETY & REGULATORY ADDENDUM SINGLE DOCK WIRELESS CHARGING 2020 Datalogic S.p.A. and/or its affiliates All rights reserved Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. This document is an addendum to the Quick Start Guide (QSG) for this product. See the QSG for additional product information. www.datalogic.com 852001762 (Rev. C) Oct. 2020 GENERAL SAFETY RULES NOTE: Read carefully the SKORPIO X5 SINGLE DOCK WIRELESS CHARGING Quick Start Guide before performing any type of connection to the SKORPIO X5 SINGLE DOCK WIRELESS CHARGING. The user is responsible for any damage caused by incorrect use of the equipment or by inobservance of the indication supplied in the user manual. CAUTION:
Before using the SKORPIO X5 SINGLE DOCK WIRELESS CHARGING, read this Addendum carefully. Before using the Skorpio X5 devices and the battery packs, read also the Skorpio X5 Safety & Regulatory Addendum. Use only the components and accessories supplied by the manufacturer for the specific Skorpio X5 being used. Do not attempt to disassemble the SKORPIO X5 SINGLE DOCK WIRELESS CHARGING, as it does not contain parts that can be repaired by the user. Any tampering will invalidate the warranty. Do not submerge the SKORPIO X5 SINGLE DOCK WIRELESS CHARGING in liquid products. For further information or support, refer to the Datalogic web site: www.datalogic.com. CAUTION: Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of the dock (see the examples below). WIRELESS AND RADIO FREQUENCIES WARNINGS to follow WARNING: Do not attempt to charge any other device different from Skorpio X5 devices. Make sure theres nothing between charger and the device. Do not insert nor attach anything, such as stickers, inside the dock slots. Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Skorpio X5. Datalogic recommends persons with pacemakers the same or other medical devices recommendations provided by Health Industry Manufacturers Associations for mobile phones. Persons with pacemakers should ALWAYS keep this device more than twenty five (25) cm from their pacemaker and/or any other medical device. Do not install the dock in any area with a potentially explosive atmosphere. Observe restrictions and follow closely any laws, regulations, warnings and best practices on the use of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where any operation involves use of explosive materials. Do not store or carry flammable liquids, explosive gases or materials with the device or its parts or accessories. Areas with a potentially explosive atmosphere are often, but not always, clearly marked or shown. Sparks in such areas could cause an explosion or fire, resulting in injury or even death. This device must be installed and operated with minimum distance of 10 cm between the radiator and users body. No Clip No Coin No Sticker NOTE: The Skorpio X5 gets warm during charging; this is normal and does not mean a malfunction. POWER SUPPLY The device is intended to be supplied by a UL Listed/CSA Certified Power Unit LPS/SELV rating 12V, min 6A power source which supplies power via the power connector of the cable. Any changes or modifications to equipment, not expressly approved by Datalogic could void the users authority to operate the equipment. Este equipamento no tem direito proteo contra interferncia preju-
dicial e no pode causar interferncia em sistemas devidamente auto-
rizados. La operacin de este equipo est sujeta a las siguientes dos condicio-
nes:
1. Es posible que este equipo o dispositivo no cause interferencia perjudicial. Dansk [Danish]
2. Este equipo o dispositivo debe aceptar cualquier interferencia. Incluyendo la que pueda causar su operacin no deseada. MARKING AND EUROPEAN ECONOMIC AREA (EEA) In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system frequencies are correctly set to be compliant with the spectrum requirements of the country. The Radio modules used in this product automatically adapt to the frequencies set by the system and do not require any parameter set-
tings. Statement of Compliance Hereby, Datalogic S.r.l. declares that the radio equipment type SKOR-
PIO X5 SINGLE DOCK WIRELESS CHARGING is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.datalogic.com. esky [Czech]
Datalogic S.r.l. tmto prohlauje, e tento SKORPIO X5 SINGLE DOCK WIRELESS CHARGING je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 2014/53/EU - 2011/65/EU. Undertegnede Datalogic S.r.l. erklrer herved, at flgende udstyr SKORPIO X5 SINGLE DOCK WIRELESS CHARGING overholder de vsentlige krav og vrige relevante krav i direktiv 2014/53/EU -
2011/65/EU. Deutsch [German]
Svenska [Swedish]
Hiermit erklrt Datalogic S.r.l., dass sich das Gert SKORPIO X5 SINGLE DOCK WIRELESS CHAR-
GING in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 2014/53/EU - 2011/65/EU befindet. Hrmed intygar Datalogic S.r.l. att denna SKORPIO X5 SINGLE DOCK WIRELESS CHARGING str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 2014/53/EU - 2011/65/EU. connected. Kesolevaga kinnitab Datalogic S.r.l. seadme SKORPIO X5 SINGLE DOCK WIRELESS CHARGING vastavust direktiivi 2014/53/EU - 2011/65/EU phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. INFORMATION FOR THE USER Por medio de la presente Datalogic S.r.l. declara que el SKORPIO X5 SINGLE DOCK WIRELESS CHARGING cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU - 2011/65/EU. Datalogic S.r.l. SKORPIO X5 SINGLE DOCK WIRELESS CHAR-
GING 2014/53/EU - 2011/65/EU. Contact the competent authority responsible for the management of radio frequency devices of your country to verify any possible restrictions or licenses required. Prendi contatto con lautorit competente per la gestione degli apparati a radio frequenza del tuo paese, per verificare eventuali restrizioni o licenze. Wenden Sie sich an die fr Radiofrequenzgerte zustndige Behrde Ihres Landes, um zu prfen ob es Einschrnkungen gibt, oder eine Lizenz erforderlich ist. ISED COMPLIANCE connected. NOTICE:
Par la prsente Datalogic S.r.l. dclare que lappareil SKORPIO X5 SINGLE DOCK WIRELESS CHARGING est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU - 2011/65/EU. Contactez lautorit comptente en la gestion des appareils radio frquence de votre pays pour vrifier dventuelles restrictions ou licences. y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is y Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
y Increase the separation between the equipment and any other radio device. y Connect the equipment into an outlet on a circuit different from that to which the receiver is Con la presente Datalogic S.r.l. dichiara che questo SKORPIO X5 SINGLE DOCK WIRELESS CHAR-
GING conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/53/EU - 2011/65/EU. Ar o Datalogic S.r.l. deklar, ka SKORPIO X5 SINGLE DOCK WIRELESS CHARGING atbilst Direktvas 2014/53/EU - 2011/65/EU btiskajm prasbm un citiem ar to saisttajiem noteiku-
miem. iuo Datalogic S.r.l. deklaruoja, kad is SKORPIO X5 SINGLE DOCK WIRELESS CHARGING atitinka esminius reikalavimus ir kitas 2014/53/EU - 2011/65/EU Direktyvos nuostatas. Hierbij verklaart Datalogic S.r.l. dat het toestel SKORPIO X5 SINGLE DOCK WIRELESS CHARGING in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU - 2011/65/EU. Hawnhekk, Datalogic S.r.l., jiddikjara li dan SKORPIO X5 SINGLE DOCK WIRELESS CHARGING jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 2014/53/EU - 2011/65/EU. Alulrott, Datalogic S.r.l. nyilatkozom, hogy a SKORPIO X5 SINGLE DOCK WIRELESS CHARGING megfelel a vonatkoz alapvet kvetelmnyeknek s az 2014/53/EU - 2011/65/EU irnyelv egyb elrsainak. Niniejszym Datalogic S.r.l. owiadcza, e SKORPIO X5 SINGLE DOCK WIRELESS CHARGING jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 2014/53/EU - 2011/65/EU. Contacta la autoridad competente para la gestin de los dispositivos de radio frecuencia de tu pas, para verificar cualesquiera restricciones o licencias posibles requerida. MARKING LABEL FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause unde-
sired operation. CAUTION: Exposure to Radio Frequency Radiation This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 10cm or more away from persons body. Datalogic S.r.l. declara que este SKORPIO X5 SINGLE DOCK WIRELESS CHARGING est conforme com os requisitos essenciais e outras disposies da Directiva 2014/53/EU - 2011/65/EU. Changes or modifications made to this equipment not expressly approved by Datalogic S.r.l. may void the FCC authorization to operate this equipment. Datalogic S.r.l. izjavlja, da je ta SKORPIO X5 SINGLE DOCK WIRELESS CHARGING v skladu z bist-
venimi zahtevami in ostalimi relevantnimi doloili direktive 2014/53/EU - 2011/65/EU. Datalogic S.r.l. tmto vyhlasuje, e SKORPIO X5 SINGLE DOCK WIRELESS CHARGING spa zkladn poiadavky a vetky prslun ustanovenia Smernice 2014/53/EU - 2011/65/EU. Datalogic S.r.l. vakuuttaa tten ett SKORPIO X5 SINGLE DOCK WIRELESS CHARGING tyyppinen laite on direktiivin 2014/53/EU - 2011/65/EU oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause unde-
sired operation. CAUTION: Exposure to Radio Frequency Radiation To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 10 cm must be maintained between the antenna of this device and all persons. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouil-
lage est susceptible den compromettre le fonctionnement. ATTENTION: Exposition au rayonnement radiofrquence Pour se conformer aux exigences de conformit RF canadienne lexposition, cet appareil et son antenne ne doivent pas tre colocaliss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparation dau moins 10 cm doit tre maintenue entre lantenne de cet appareil et toutes les personnes. RADIO TECHNOLOGIES AND FREQUENCY BANDS The SKORPIO X5 SINGLE DOCK WIRELESS CHARGING incorporates the following radio technolo-
gies and supports the corresponding frequencies, as specified below:
Radio Technology Frequency Band Wireless Charging (Transmitter)
[110 - 145] KHz CLEANING THE DOCK Periodically clean the Skorpio X5 SINGLE DOCK With Contacts using a soft cloth slightly dampe-
ned with only water or Isopropyl Alcohol (70%). Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, sol-
vents) or abrasive pads to clean the dock. Do not spray or pour liquids directly onto the dock. The dock is not water resistant. Keep it dry. Eesti [Estonian]
Espaol [Spanish]
[Greek]
Franais [French]
Italiano [Italian]
Latviski [Latvian]
Lietuvi [Lithuanian]
Nederlands [Dutch]
Malti [Maltese]
Magyar [Hungarian]
Polski [Polish]
Portugus [Portuguese]
Slovensko [Slovenian]
Slovensky [Slovak]
Suomi [Finnish]
ENGLISH ITALIANO DEUTSCH FRANAIS ESPAOL NOTICE:
NOTE: