Ethernet or junction box mount This access point can be mounted to any US or European-style junction box for secure installations in hotel and resort guest rooms, dorms, care facilities and more. Remove the rear door and outdoor seal from the bottom of the access point. Attach the universal mounting plate with the smooth side against the wall to a junction box using the desig-
nated screw holes. Connect the small Ethernet cable (included) to the female connection in the wall, then pull it through the mounting plate and plug into Ethernet 1 for 802.3af PoE or Ethernet 2 for 18-24v passive PoE. Connect any pass-through device to the unused Ethernet port and position the cable in the bottom channel of the access point. Next, place the access point over the mounting plate and slide down until it locks into place. To unlock, insert a small, at screwdriver into the hole on the side of the access point. Slide the access point until it disen-
gages from the mounting plate. openmesh.com/a-ethernet We help professionals create powerful, easy-to-use networks that automatically spread Internet connections throughout hotels, apartments, retail stores, restaurants, small and medium-sized businessesand just about anywhere else. The Open Mesh A Series access points are a modular, plug-and-play professional WiFi solution that works with CloudTrax, a free cloud-based network controller that can manage an unlimited number of switches, access points and networks around the world. openmesh.com 2018 Open Mesh, Inc. All Rights Reserved. 111 SW 5th Ave, Suite 1150, Portland, OR USA 97204 The software included in this product contains copyrighted software that is licensed under GPL. A copy of that license, along with instructions on how to obtain the source code, is available at http://www.openmesh.com/gpl. Outdoor mount This access point can be congured as an outdoor model and mounted to any wall or pole. This conguration protects against the sun, rain and dust. (Outdoor for NII-3) Remove the rear door and outdoor seal from the bottom of the access point. Attach the universal mounting plate to any outdoor wall or pole using screws or zip ties (not included). The small tabs should be at the top of the plate so the cable exits through the bottom of the access point. Open the slit in the side of the rubber gasket and place the Eth-
ernet cable through the hole. Plug the cable into Ethernet 1 for 802.3af PoE or Ethernet 2 for 18-24v passive PoE. Ensure the second hole still has its rubber plug in place. Place the rubber gasket into the channel surrounding the ports on the access point. Place the rear cover on the access point and snap into place. Finally, place the access point over the mounting plate and slide down until it locks into place. To unlock, insert a small, at screwdriver into the hole on the side of the access point. Slide the access point until it disen-
gages from the mounting plate. openmesh.com/a-outdoor 1. 2. A62 Quick Start Guide