Remote control 2.4 GHz eco (external RF-receiver + RF eco) Zur kabellosen Bedienung Ihres motorisierten Komfortbettes
Kabellos, ergonomisch, zuverlssig, einfache Bedienung, elegantes Design DE Funktionsbeschreibung Pairing-Methode:
1. Verbinden Sie den Funkempfnger mit dem OKIMAT 2. Drcken Sie 2x die Pairing-
am Empfnger Taste bis die LED aufleuchtet. Der Pairing-Prozess ist fr die nchsten 10 Sekunden aktiv. 3. Drcken Sie gleichzeitig die Tasten und am Handsender, bis die grne LED anfngt zu blinken. Das Blinken besttigt den erfolgreichen Pairing-
Prozess. Hinweis:
Fr den Pairing-Prozess sollte der Abstand zwischen Sender und Empfnger weniger als zwei Meter betragen. For wireless operation of your motorized comfort bed system
Wireless, ergonomic, reliable, easy handling, elegant design Til fjernbetjening af dit Comfort motor system
Kabells, ergonomisk, driftsikkert, let hndtering, elegant design GB DK / NO Functional Description Pairing method:
1. Connect the RF receiver to the OKIMAT 2. Press the pairing button on the receiver 2x until the LED turns on. You now have 10s for the pairing process. 3. Press Keys and of the handset simultaneously until the LED on the receiver starts blinking. The blinking confirms successful pairing. Note:
For pairing the distance between transmitter and receiver should be less than 2 meters. Funktionsbeskrivelse Opstning/indlring:
1. Tilslut RF modtageren til din OKIMAT 2. Tryk 2x p indlrings-
tasten p modtag-
eren indtil LED lyser. Du har nu 10 sek. Til indlringsprocessen. 3. Tryk og p hnd-
senderen p samme tid indtil LED lampen p modtageren begynder at blinke. Nr LED p modtageren blinker er indlringsprocessen gennemfrt. Bemrk:
Afstanden mellem modtager og sender br ikke vre mere end 2 meter i indlrings-processen. OKIMAT Fr fjrrstyrning av ditt komfortmotorsystem
Kabells, ergonomisk, driftsker, enkel hantering, elegant design RFeco RF-receiver SE Funktionsbeskrivning Anslutning:
1. Stt i RF-mottagarens kontakt i uttaget p din OKIMAT 2. Tryck 2x p anslutnings-
p knappen mottagaren tills den LED-
lampan lyser. Du har nu 10 sekunder p dig att ansluta. 3. Tryck p knapp och samtidigt p fjrrkontrollen tills LED-lampan p mottagaren brjar blinka. Nr LED-lampan p mottagaren blinkar r anslutningen genomfrd. Observera:
Avstndet mellan mottagaren och fjrr-
kontrollen br inte vara mer n tv meter under anslutnings-processen. 2x February 18, 2014 ID-no. 71864 page 1 / 4 Remote control 2.4 GHz eco (external RF-receiver + RF eco) DE - Technische Daten: GB- Technical data:
Handsender Abmessungen Frequenzbereich Batterie Arbeitsstrom Standby Stromverbrauch Umgebungstemperatur Handset Dimensions Frequency Range Battery Operating Current Standby Current Ambient Temperature Empfnger Abmessungen Receiver Dimensions Frequenzbereich Eingangsspannung Arbeitsstrom Standby Stromverbrauch Umgebungstemperatur Frequency Range Input voltage Operating Current Standby Current Ambient Temperature DK / NO - Tekniske data:
Hndst Dimensioner Frekvens Batteri Driftsstrm Standby strm Arbejdstemeratur SE - Tekniska data:
Fjrrkontroll Dimensioner Frekvens Batteri Driftstrm Standby-strm Arbetstemperatur 164*57*46mm 2.4 GHz 3x AAA
< 20 mA
< 10uA
+10 +40 C 102*58*25mm 2.4 GHz DC 30 V from AC Power Modtager Dimensioner Frekvens Indgangsspnding Driftstrm Standby strm Arbejdstemperatur Mottagare Dimensioner Frekvens Inspnning Driftstrm Standby-strm Arbetstemperatur
< 250 mA
< 5 mA
+10 +40 C Notabsenkung Emergency lowering Ndsnkning Ndsnkning Pairing Pairing Opstning/Indlring Anslutning February 18, 2014 ID-no. 71864 page 2 / 4 Remote control 2.4 GHz eco (external RF-receiver + RF eco) FCC Warning / IC Warning FCC: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Any changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. IC: This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device."
Leprsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio Exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
February 18, 2014 ID-no. 71864 page 3 / 4