Kurzanleitung RF-ENHANCE / Quick guide RF-ENHANCE Pairing RF-ENHANCE Pairing RF-ENHANCE D GB Zur kabellosen Bedienung Ihres motorisierten Komfortbettes Kabellos, ergonomisch, zuverlssig, einfache Bedienung, elegantes Design Aktivieren Sie den Pairing-Modus. Pairing Methode 1. Verbinden Sie alle Komponenten mit dem Antriebssystem. 2. Stecken Sie den Stecker in die Steckdose. 3. Drcken Sie 2x die Pairing-Taste an der HE150 bis die Pairing-LED leuchtet. Der Pairing-Prozess ist fr die nchsten 2sec aktiv. For wireless operation of your motorized comfort bed system Wireless, ergonomic, reliable, easy handling, elegant design Activate the pairing mode. Pairing method 1. Connect all components to the drive system. Insert the plug into the socket. 2. 3. Press the pairing button on the HE150 twice until the pairing-LED turns on. You now have 2s for the pairing process. 4. Drcken Sie gleichzeitig die Tasten (1) und (2) am RF-ENHANCE, bis die Pairing-
LED erlischt, die Hintergrundbeleuchtung und die LEDs im RF-ENHANCE blinken. Der Lernprozess ist abgeschlossen. 4. Press button (1) and (2) of the RF-ENHANCE simultaneously until the pairing-LED extinguishes, the backlight and the LEDs of the RF-ENHANCE flashes. The learning mode is completed. 5. Pairing 2.tes Antriebssystem: Drcken Sie gleichzeitig die Tasten (4) und (5) am 5. Pairing a second drive system: Press button (4) and (5) of the RF-ENHANCE RF-ENHANCE, bis die Pairing-LED erlischt, die Hintergrundbeleuchtung und die LEDs im RF-ENHANCE blinken. Der Lernprozess ist abgeschlossen. simultaneously until the pairing-LED extinguishes, the backlight and the LEDs of the RF-ENHANCE flashes. The learning mode is completed. Hinweis: Fr den Pairing-Prozess sollte der Abstand zwischen Sender und Note: The distance between transmitter and receiver should be less than two Empfnger weniger als zwei Meter betragen. RF-ENHANCE meters for pairing. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . Tasten / Button Funktion Function 1 - 22 1 + 2 4 + 5 Kundenspezifisch Customer specific Pairing (System 1) Pairing (System 1) Pairing (System 2) Pairing (System 2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter FCC Warning / IC Warning FCC: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Any changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. IC: This device complies with Industry Canada RSS-210 standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device."
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio Exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
12.09.2019 92688 1.0 1 / 1