ENGLISH DUTY CALL MQ-27 STUNT DRONE Instruction Manual f INTRODUCTION}
Congratulations on purchasing your Call of Duty drone! This aircraft uses a six-axis gyroscope to make it easier to fly and control both indoors and outdoors. Please carefully read this manual before operating your drone. Keep this manual for future reference. Before your frst fight, please take the time to carefully read this manual containing important flight information that will help your fight go more smoothly.
{TABLE OF CONTENTS]
Introduction Table of Contents Notice Warnings Additional Warnings and Precautions Satety Notes Included Drone Diagram Remote Controller Diagram Remote Controller Battery Installation Charging Your Drone Syncing the Quad and Remote Flight Controls Practice Tips Trimming the Quad Recalibrating the Quad Headless Mode One Key Return Flips and Rolls Speed Selection Changing the Blades Troubleshooting
{NOTICE}
All instructions, warranties, and other collateral documents are subject to change at the sole discretion of our company. ir a)
| WARNINGS Read the ENTIRE instruction manual to become familiar with the features of the product before operating, Failure to operate the product correctly can result in damage to the product, personal property, or cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense, and requires some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or property. This product is not intended for use by children without direct adult supervision. This manual contains instructions for safety, operation, and maintenance. tt is essential to read and follow all the instructions and warnings in this manual, prior to assembly. set up, or use, in order to operate correctly and avoid damage or serious injury. EEE WARNINGS AND PRI CAUTIONS}
1. Age Recommendation: Not for children under 14 years of age. This is not a toy. 2. Always operate in open spaces away from obstactes, people, and hazards. 3. Always follow directions and warnings for this and any optional equipment carefully. (Chargers, Rechargeable battery packs, etc) 4. Always keep small parts and electrical parts out of the reach of children, 5. Always avoid water exposure to all equipment not specifically designed and protected for this purpose. Moisture can cause damage to electronics. 6. Never place any portion of the model in your mouth as it could cause serious injury or even death, 7. Never operate your model with low batteries Eee tha e!
If this is your first time flying a quadcopter read the manual carefully. Seek the help of an experienced pilot to help you fly. These safety instructions are intended not only for the protection of your drone but also to protect your own safety. Improper operation can cause injury or property damage. This product is suitable for indoor and outdoor use. Please make sure you choose a flight area with no obstacles and maintain a safe distance from people and pets. Do not operate near power lines. RC models are composed of many precise electrical components. Itis important to keep the model and associated equipment away from moisture and other contaminants. The intraduction of exposure to water or moisture in any form can cause the model to malfunction or crash. Do not operate or expose to rain or moisture. To avoid a potential fire hazard from batteries, do not short, reverse polarity, or puncture batteries, Battery charging should be done under adult supervision at all times, at a location out of the reach of children. Do not mix Ni-Cad and Alkaline batteries, Make sure the batteries are installed correctly to ensure correct polarity. f you do not plan to use your drone for an extended period of time, remove the batteries from the controller to avoid battery leakage, which may damage the controller. Please dispose depleted batteries according to local laws and ordinances. Li-Polymer batteries have higher operational risks compared to other batteries. Its imperative to follow proper operational guidelines. The manufacturer and dealer assume no liability for accidental damages caused by improper usage. Do not use any ather charger ather than the supplied charger included in this packaging in order to avoid potential fire or explosion. Do not crush, disassemble, burn, or reverse polarity, RC models are made from various forms of plastic very susceptible to damage or deformation due to extreme heat and cold. Make sure not to store the mode! near any heat source or adverse temperatures. Drone xt Sp Va L eo Z ose iat sina
(EESNEEEEAN Head front Motor
(a Receiver EERSTE Speed Solection Power Flip Button Bation Button Thratle oystick Directional Joystick Headless Mode. Forward Trim Button
(One Key Retum | Backward Trim Button Fuming Letuight Tim Buttons Tim Buttons iEEYer CONTROLLER BATTERY INSTALLATION]
To install batteries, use the included screwdriver to open the battery cover. Rotate counterclockwise to loosen screw. Insert f e a 3A batteries into the remote. Make sure the batteries are installed in the correct polarity as indicated in the controller. Do not mix old and new batteries or batteries with different chemistries, Reattach battery cover, Rotate screw clockwise to refasten.
{ CHARGING YOUR DRONE}
To charge your drone, first slide open the battery cover and disconnect the battery from the drone. Plug the provided USB charger into a USB port. A red light on the USB charger will turn on. Connect the battery to the USB charger. The light on the charger will turn off. The battery is now charging, The red light will turn on again once the charging process has completed. Always charge your drone under adult supervision and out of the reach of children. Charging lime is approximately 40 minutes. When you are ready to fly your drone again, reinsert the battery into the bottom of the drone and close the cover.
{SYNCING THE QUAD AND REMOTES
=) 1. Insert the battery into the drone, connect its wires, and place it on a flat surface. The lights on the drone will begin to flash. Do not move the drone during the syncing process to ensure the gyroscope stays balanced, 2. Lower the throttle joystick on the remote to its lowest position. Turn the remote on. The lights on the drone will stop flashing and stay on. 3, Push the throttle joystick to its highest position and the remote will beep. Now move it ta its lowest position again and the remote will beep a second time. The drone and remote controller have been synced together. You are now ready to fly. Sf>
(@\Y\
If you are not going to use your drone for an extended period of time, please take out the batteries in your remote controller. Potential battery leakage could occur and possibly damage the remote or create a fire hazard.
(RCESSNOES), Before flying your drone, itis highly recommended that you familiarize yourself completely with its controls. Read through the instruction manual completely before attempting your first flight. Elevation Push up on the throttie joystick. The drone will begin to ascend, Pull down on the throttle joystick. The drone will begin to descend. Turning Push the throttle joystick to the right The drone will turn to right. Push the throttle joystick to the left. The drone will turn to left Push the directional joystick up. The drone will ly forward Pull the directional joystick back. The drone will ty backward. Alileron Push the directional joystick to the right. The drone will fly to the right. Push the directional joystick to the left The drone will fly to left. ir ul Exess Use these recommended practice exercises to become a better drone pilot:
Elevation: Raise the drone using the throttle joystick. Gradually lower the drone so it lands softly to the ground. Direction: Move the drone in a cross pattern using the directional joystick. Move forward, backward, lef, right, and back to its original position, Turning: Tum the drone in a throttle joystick. Turn left and right repeatedly, and back to its original position Flying: Once you have mastered the previous three exercises, draw a circle on the ground, Practice flying within the confines of the circle, Narrow the circle as your skills progress. ir a!
(STI THE QUADA If your drone is leaning to or favoring a side, you may need to use the trim feature to balance it out so it flies straight. Forward/Backward If the drone leans forward, press the Backward Trim button unti it balances out.
(Xo @\
If the drone leans backward, press the Forward Trim button until it balances out. Left/Right Ifthe drone leans left, press the Right Trim button until it balances out Ifthe drone leans right, press the Left Trim button until it balances out. Tuning Ifthe drone spins left, press the Right Turn Trim button until it balances out. Ifthe drone spins right, press the Left Tum Trim button until it balances out. 5!
[ RECALIBRATING THE QUAD}
if your drone is leaning to or favoring a side, you may need to recalibrate the drone to balance it out soit fies straight. To recalibrate, place the drone on a flat surface. Hold the Throttle Joystick down and to the left and the Directional Joystick dawn and to the right as depicted in the figure. The lights on the drone will flash for |
3 seconds. As soon as the lights on the quad stop blinking, recalibration is complete and the quad should be balanced. ir a) TESS ADLESS MODE}
When in Headless Mode, no matter what direction the quadcopter faces, it wil respond according to the direction pushed on the remote.
(Forward on the remote will make the quadcopter fly forward, even if it is pointing in another direction.) To enter Headless Mode, land the drane on a flat surface. Press the Headless Mode button. The remote will keep on beeping. To exit Headless Mode, simply press the button again, if ey aai=anS ei I When using One Key Return, no matter what direction the quadcopter faces, the aircraft will automatically fly directly back to the remote. To enter One Key Return, simply press the One Key Return button. The remate will beep as the drone returns to the remote. To exit One Key Return, press the button again or press forward on the Directional Joystick
[FLIPS AND ROLLS]
Your drone can perform impressive flips and rolls in midair. In order to do this, press the directional joystick on your remote during fight, Move the joystick in any direction and the aircraft will perform a coinciding flip. Ez ae Eas ION}
Your drone can fly at three speeds. To select a speed, simply press the Speed Selection button on your remote to select the speed 1 Beep: Slow Speed level. Your remote will beep each time you 2 Beeps: Medium Speed | a |
switch speeds. Beeps: Fast Speed |" ee KS TENE, Ifa blade breaks or falls off your drone after a crash, it wll be up to you to repair it. Simply push one of the extra blades onto the exposed motor. It is important for the correct blade to be put on the corresponding motor or the drone will not fly. A letter is marked on each blade to indicate which motor it should go on,
{ TROUBLESHOOTING) Problem | Cause Solution Deane LED Rohs Hine continuity ot Unable to sync drone to Repeat pawer sequence and more han secs alr done i tured on me banda sneer 1. ert atria have ben depicted 1. Replace betes Narespose ster quatis medion. | 2.Battris ar instal atinearect- | 2. Reinstall at conct polarity ondary Nolo does no sped a ive tery hasbeen depicted eceroe quad batlry
% 7 . 7. Bent rotor blades. 1. Replace damaged blac. ice sri bat dane doa take of +2. Quad battery is depleted, 2. Recharge battery. dua is making, rating rise Bent or damaged ron bes Replace damaged bite hid wanders ward afer tim 7 Lower forward adjustment. Forward rin Js to high 2. Recalibrate drone. 7 Were oa 7. Rental moto Cannot Ny afer cael: 2. Gear has been loosened. 2. Tighten gear. 2016 Activision Publishing, Inc, ACTIVISION and CALL OF DUTY are trademarks of Activision Publishing, Inc. ) All rights reserved Sarestenprene mae OI amen: (A) > ae :
a 2 atm ion UO CE es &
Specifications, colors and contents may vary trom llustrations. FC Ib: 2nANZcODODAMOR?
BATTERY WARNING: Manufactured in China,
+o no mx alkali, standard (carbon zine, ochargeabo (nko! hyde bates, Batch Ref: 161001D6L 1 not rm ot andra ater, rechargeabe battres should nol be recharged. Rochargoablo batteries shoud bo removed fom te appliance betee beng charged, Evsunedbansweddborneret enemy AX WARNING:
Model Number: COD-ODR MQ27 rooms sa neon or a CHOKING HAZARD mata 1 btn stam ere or equa ype ne csmnandd be ues
{ean boc wiht anes play Nat fox chien uncer years. a, __ ae Contains 1 x3.7V LiPo battery pack. Requires 3 x 1.5 AA (LRG) alkaline batteries (not included). Batterias or battery packs must be recycled or disposed of properly. When this product has reached the end of its useful Ife it should not be disposed of with other household waste, The Waste Electrical and Electronic Equipment Regulations require i to be separately collected sa that it can be treated using the best available recovery and recycling techniques.his iwi minimize the impact on the environment and human health from soil and water contarnination by any hazardous substances, decrease the resources required to make new products and avoid using up landfill space. Please do your part by keeping this product out of the municipal waste stream! The wheelie bin symbol means that it should be collected as"waste electrical and electronic equipment You can return an old product to your retaller when you buy a similar new ane. For other options, please contact your local council GL Toys hereby declares that this toy is compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy ofthe declaration of conformity can be requested through, Parkway, Edison, NJ 08837. support@dglusa.com or DGL Toys. 195 Raritan Cen FCC Statement: This device complies with Part 15 of the FCC rules, Operation is subject te the following tow conditions (1) This device may not cause harmful interference, and (2) This device must accept any interference received. including Interference that may cause undesired operation, NOTE:
This equipment has been tested and found to comply with the limts fora Class B digital device, pisuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed anc used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will rat occur ina particular installation. IFthis equipment dees cause harmful interference to radio o televisin ceception, which can be determined by turning the quipment offand on, the user is encouraged to try to corcect the interference by one or more ofthe following measures:
Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet ona circuit ifferent from that to which the receiver is connected.
+ Consult the dealer oran experienced racio/TV technician for help. Use of shielded cable is required to campy with Cass limits in Subpart B of Part 15 of the FCC rules. Donat make any changes oF madiications to the equipment unless otherwise specified in the manual. I'such changes or medications should be made, you could be requiredto stop operation or the equipment This Class 8 digital apparatus complies with Canadian ICES-003 This device complies with Industry Canada License-exempt RSS-210, Operation ls subject tothe following two conditions (1) thisdevice myay not cause interference, and (2) this device must accept any interference including interference that may cause undesired operation of the device. POPPI OI OPS IISIOUIUSOIOUIIUS Limited 90-Day Warranty DGL Group, Ltd. warrants to the original consumer that this product is free from any electrical or mechanical defects for a period or 90 DAYS from the date of purchase. If any such defect is discovered within the warranty period, DGL Group, Ltd. will repair or replace the unit free of charge upon receipt of the unit, shipped postage prepaid and insured to our warranty center. The warranty covers normal consumer use and does not cover damage that occurs in shipment of failure that results from alterations, accident, misuse, abuse, neglect, wear and tear, inade-
quate maintenance, commercial use or unreasonable use of the unit. Removal of any parts/components voids all warranties. This warranty does not cover cost of repairs made or attempted outside by third-party individuals and fitness, are hereby limited to 90 DAYS from the date or purchase. Consequential or incidental damages resulting from a breach of any applicable express or implied warranties are hereby excluded. Some states do not allow limitations on the duration of implied warranties and do not allow exclusion of incidental or consequential damages, so the above limitations and exclusions in these instances may not apply. REPAIR/REPLACE PRODUCT If your product begins to malfunction or stop working, immediately call or email our warranty center at the phone/email listed below. If it is determined that a return is necessary, our warranty department will issue you an RMA number/form and an address to the nearest return center to ship the product to. IMPORTANT NOTICE:
We will reject all returns that are not accompanied by an issued RMA form and number so make sure to contact our warranty center before attempting to return your product!
PREPARATION FOR SHIPPING YOUR PRODUCT Please repack your product in a durable box, preferably in the original carton, and send it prepaid, and adequately insured. Include the RMA form that was issued by our warranty department along with your daytime telephone number and email address (if available) inside the shipping carton. If your warranty has expired, contact our warranty center for charged service. For further information please send all inquiries to support@dglusa.com IMPORTANT NOTICE!
DO NOT ATTEMPT TO SHIP YOUR PRODUCT BACK WITHOUT FIRST CONTACTING OUR WARRANTY DEPARTMENT AT:
DGL Group. Ltd. WARRANTY REPLACEMENT DEPARTMENT TEL: 888-987-3089 support@dglusa.com CEM AEIE EME AE VEEN AENEAN ENE ENEMA ENE ENEMY ENED ee, DOPOD SDPOD OPI ODO Safety Guidelines e Follow community-based safety guidelines, as developed by organizations such as the Academy of Model Aeronautics (AMA). e Fly no higher than 400 feet and remain below any surrounding obstacles when possible. e Keep your drone in eyesight at all times, and use an observer to assist if needed. e Remain well clear of and do not interfere with manned aircraft operations, and you must see and avoid other aircraft and obstacles at all times. e Do not intentionally fly over unprotected persons or moving vehicles, and remain at least 25 feet away from individuals and vulnerable property. e Contact the airport or control tower before flying within five miles of an airport. e Do not fly in adverse weather conditions such as in high winds or reduced visibility. e Do not fly under the influence of alcohol or drugs. e Ensure the operating environment is safe and that the operator is competent and proficient in the operation of the drone. e Do not fly near or over sensitive infrastructure or property such as power stations, water treatment facilities, correctional facilities, heavily traveled roadways, government facilities, etc. e Check and follow all local laws and ordinances before flying over private property. e Do not conduct surveillance or photograph persons in areas where there is an expectation of privacy without the individuals permission. WARNING!
To reduce the risk of fire or burns:
Do not disassemble, crush, puncture, or short external connectors contacts. Use only with specified charger and player. Do not dispose of in fire or water. Do not expose to high temperature above 140 F (60 C). Store between 32 F (0 C) and 140 F (60 C). Keep away from children. See operating instructions of this battery or product. Li-ion Battery rd) C C Must Be Disposed Of Properly Batteries should be recycled or disposed of as per State and Local guidelines. __ Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, thers no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Rearient or relocate the receiving antenna. Increase the separation between the equipment and recsiver.
* Connect the equipment into an outlet on a cirauit different from that to which the receiver is connected
* Consult the dealer or an experienced radio/TV technician for help.