FCC ID: 2AANZSWBU LEDEEZ 2PK BT BULB

26x7.6cm BiH Bate: soe LEDEEZ SMART BULBS 3 Bluetooth Google Play

@ AppStore USER MANUAL Add Device Create Scene Scan CONTROL YOUR DEVICE:

+ After the device has been connected successfully, find the device at the bottom of to enter the smart light control panel. Ther are 8 light modes to choose from 1. White light Mode: Dimmable brightness and temperature controls of white light 5000K 2. Color Mode: Change the color and birghtness of bulb 3. Scene mode: Eight scene modes to choose from 4. Music Sync Mode: Select Music Rhythm and the bulb will automatically sync with the rhythm of your music 5. Time Set Mode: Set the timer for automatic On/Off 6. Group Control Mode: Multiple bulbs can be grouped together to be controlled by the same switch. Thank you for purchasing the LEDEEZ Smart Color Changing Light Bulb via Bluetooth and app. Please read all instructions carefully before using and retain this manual for future reference. SAFETY INSTRUCTIONS Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids. Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit. Do not use the unit if it has been dropped or damaged in any way. Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk. Do not puncture or harm the exterior surface of the product in any way. Keep the unit free from dust, lint, etc. Do not use this unit for anything other than its intended use or purpose. Doing so may damage the device. This product is not a toy. Keep out of reach of children. CAUTION: Risk of Electrical Shock - Use in Dry Locations Only. This device is not intended for use with emergency exit fixtures or emergency exit lights.

(see below for how to set up a group) CREATE A GROUP:

1. Click the light bulb device 2. Click the setting dots in the upper right corner 3. Click Create a group 4. Click the + to add a device 5. Create a group name and click save 6. Now that your group has been created you can control multiple bulbs at the same time Note:

+The bulb must be within 100ft (30m) of the device for a reliable bluetooth connection in the open space

+The time set function can be performed in group mode

*To reset the bulb perform the on-off-on-off-on action. If the bulb begins blinking quickly the reset was successful, if the bulb does not blink repeat the process PRODUCT SPECS:

Power: 9W Voltage: 120V Lumen: 800LM Lifespan: >15000H Frequency: 60Hz Color Temp: 5000K + RGB Control Method: App BT ID: D058376 FCC ID: 2AANZSWBU CARE AND MAINTENANCE

+ Do not expose the bulb to liquid, moisture, or humidity to avoid damage to the product's internal circuitry.

+ Do not use abrasive cleaning solvents to clean the unit.

- Do not expose the bulb to extremely high or low temperatures as this will shorten the life of the electronic device and/or distort certain plastic parts.

+ Do not dispose of the bulb in fire as they may explode or combust.

+ Do not expose the bulb to contact with sharp objects as this will cause scratches and damage.

+ Do not let the bulb fall from high places, as doing so may damage the internal circuitry.

+ Do not attempt to disassemble the bulb. In the event that the bulb does not function properly, return it to the store where it was purchased. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a_ residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

DOWNLOAD & INSTALL THE APP Scan the QR code below or search Tuya or Smart Life in the Apple App store or Google Play 1. Select your country, then log in with your email and top GET to recieve a verification code. Enter your verification then tap LOGIN 2. Or sign in via social media account ADD A DEVICE:

1. Turn on your phones Bluetooth 2. Turn on lightbulb, device will flash after 3-5sec. If your device does no flash automatically turn it off and on 3x to prefrom a device reset 3. When bulb is blinking open selected app anda pop-up will appear tap find the device and click Add to add your device to the list 4. |f pop-up does not appear automatically tap the + button in the upper right corner of the app home page, then tap add a device and select Light source Bluetooth

+ Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

+ Consult the dealer or an experienced radio/TV technician for help. DGL Group guarantees the quality of this product. For questions or comments, please feel free to contact us via email at support@dglusa.com. Model: LE-SWBU-2PK-MLT Ref: 2023011I8EL += MFG Date: 01.23 LEDEEZ DGL Group guarantees the quality of this product. For questions or comments, please feel free to contact us via email at support@dglusa.com Distributed by DGL Group, LTD. 2045 Lincoln Highway, Edison, NJ, 08817, USA. www.dglusa.com

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AANZSWBU Product Name: LEDEEZ 2PK BT BULB Model Name: LE-SWBU, LE-SWBU-2PK-MLT, LE-SWBU-

MLT, LE-SWBU-2PK-XXX, LE-SWBU-XXX

[DGL Group LTD.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AANZSWBU Product Name: LEDEEZ 2PK BT BULB Model Name: LE-SWBU, LE-SWBU-2PK-MLT, LE-SWBU-

MLT, LE-SWBU-2PK-XXX, LE-SWBU-XXX

[DGL Group LTD.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2AANZSWBU Product Name: LEDEEZ 2PK BT BULB Model Name: LE-SWBU, LE-SWBU-2PK-MLT, LE-SWBU-MLT, LE-SWBU-2PK-XXX, LE-SWBU-XXX 2.911(d)(7) USA Designated Agent for Service of Process We, [DGL Group LTD.] (the applicant) designate [DGL Group LTD.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States FRN: 0022847883 Contact Name: Amy Chao Telephone No: 001-732-692-5180 Email: amy@dglusa.com Signature:

Date: Feb. 28, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

DGL Group,Ltd. Agent Authorization Company: DGL Group, Ltd. Address: 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Product Name: LEDEEZ 2PK BT BULB Model Number(s): LE-SWBU, LE-SWBU-2PK-MLT, LE-SWBU-MLT, LE-SWBU-2PK-

XXX, LE-SWBU-XXX Product Description: LEDEEZ 2PK BT BULB We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Company: DGL Group,Ltd. Amy Chao Date: 2023-02-28

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Feb. 28, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AANZSWBU Model Number: LE-SWBU, LE-SWBU-2PK-MLT, LE-SWBU-MLT, LE-SWBU-

2PK-XXX, LE-SWBU-XXX To Whom It May Concern:

We, The DGL Group LTD. hereby declare that the models are identical except the appearance of the color. Except for the different above, no other modification is performed. Sincerely, Signature:

Contact person: Amy Chao

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AANZSWBU Date: 2023-02-28 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely DGL Group LTD. Contact person: Amy Chao