FCC ID: NXM-S22040 MY FIRST SMARTPHONE SET

122040US1 KDUS AW _UM 02 004 230809 VO1 (FM): for production, based on brief I22040US1_BRIEF UM_230613.pptx U n its: mm Actual Scale VO2 (FM) SAR+frequency bands+Eu declaration added Printing colors: a Printing Material:

Precauti with batteries Do not use rechargeable batteries. Do not try to charge non-rechargeable batteries, as they may leak or explode. When rechargeable batteries are used anyway:

rechargeable batteries shall be charged only under the Re-install the battery cover and tighten the screw to secure. Do not over tighten. Always remove exhausted batteries from the product. Battery leakage and corrosion can damage the product. e Do not short-circuit the supply terminals. 12m:+

supervision of an adult. Rechargeable batteries shall be removed from the toy before being charged (if they can be removed). If using rechargeable batteries with a child-use charger, the child must be at least 8 years of age. Batteries must be removed and inserted by an adult. Do not mix new with old batteries. Do not mix different types of batteries (i.e. alkaline and zinc carbon] or re-chargeable (nickel cadmium) batteries. Using a suitable screwdriver, undo and remove the battery caver located under the unit. Insert the required batteries into the compartment ensuring they are installed the correct way. The polarities are marked inside the battery compartment. An incorrect location may either damage the toy or cause battery leakage, or ta an extreme degree, lead ta battery explosion. To Keep the unit clean, wipe with a slightly damp cloth. Only use the type of batteries specified on or inside the battery compartment. Also, please replace all batteries at the same time for better product performances. Do not dispose of batteries in fire, as they may leak or explode. If battery leakage occurs and comes in contact with the skin or eyes, wash immediately with lots of water. Do not immerse battery operated products. Wipe clean only. Remove the batteries during long periods of non-use. Store batteries away from metal objects. Never disassemble batteries. If a battery is swallowed, consult a doctor or medical facility. Dont forget to take the product with you. Keep the unit out of direct sunlight and away from any direct heat source. Do not expose the unit to moisture or water. This product complies with the essential requirements of the European Toy safety directive. This product complies with the ASTM F963-17 standard. FCC LABEL COMPLIANCE STATEMENT:

This device complies with FCC's radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause a Learn about numbers, colors and animal sounds!

Smartphone Set INSTRUCTION MANUAL Childs phone to make realistic calls!

mm ee EL ES ne fas Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pravide reasonable pratection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radia or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help. RF exposure information (SAR) EU Declaration of conformity This device meets the government's requirements for exposure to radio waves. Hereby, "DISET, S.A." declares that the radio equipment type S22040 is This device is designed and manufactured not to exceed the emission limits for in compliance with directives: 2014/33/EU RED DIRECTIVE, 2014/30/EU exposure to radio frequency [RF] energy set by the Federal Communications EMC DIRECTIVE. The full text of the EU declaration of conformity is. devoas employe unk of measurement knowns thospectic Absorption Rate, notable atthe follawing internet adds or SAR. The SAR limit set by the FCC is 1.6 W/kg, Tests for SAR are conducted _ttp://www.kdplanet.com/download/S22040_CE.pdf using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Operating Frequency Bands:

Although the SAR is determined at the highest certified pawer level, the actual Bluetooth wireless technology: 2402 MHz to 2480 MHz SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels soas_~ Maximum Radiofrequency Power Transmitted:

to use only the poser required to reach the network. In general, the closer you Bluetooth wireless technology: -1.43 dBm (Parent Unit]

are to a wireless base station antenna, the lower the power output. While there -3.05 dBm (Child Unit]

may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. Parent's phone can make and receive calls!

ae 2 quiz modes to pretend to take photos and send messages!

These phones can be used for two-way communication. The childs phone can be used for communication to the other phone or to learn animals, colors and play games. Important information This toy is suitable for children aged 1 year & over. e Please retain this manual for future reference. We will use the following symbols in the instruction manual:

: to call

@ : to hang up WARNING: All packing materials such as internal bags, plastic collars, plastic films, carton inserts are not part of this product and should be discarded for your child's safety. 210 Diset, S.A. Calle C, n 3, Sector B, Zona Franca, 08040 Barcelona Espana Kidz Delight, Ltd. 1431 Opus Place Suite 110 Downers Grove Illinois IL 60515 United States of America 122040US1_KDUS_AW_UM_02_004_ 230809 Printed in China Made in China IMPURIANT: ror agaitionat safety, Cneck toys regularly for signs Of Gamage auring use. The childs phone is fitted with a Try-me tag that has to be removed before handing the phone The Bl h word mark and : , : :

a stored (rade nante owned uy Blcctoet to the child. Once removed, the sound level will be reduced to protect your childs hearing. registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Diset, S.A. is under license. Other trademarks and trade names are those of their respective owners. www:kdplanet.com r Model: S22040 2017 Diset,S.A. = INFINIFUN tered 6 Jumbodiset Group. trademark of DISET, SA ( | Ref.: i22040US1 How to use your phones? | The sound level is too low Make sure you speak into the microphone between the green and red buttons. If volume is 1. Press and hold the _ key for two seconds on each handset to power on. still low, replace batteries. 2. The green light switches on: the Bluetooth wireless technology is on. | The child's phone is fitted with a Try me tag 3. Press the key again on one of the two phones to call. The other phone rings. which has to be removed before handing the Press the _ key to answer. You can begin talking as if it was a real phone. | phone to the child. Once removed the sound 4. Press the key on one of the two phones to hang up. level will be reduced to protect your child's 5. Press the key on one of the two phones to start a new call. | hearing. 6. Press the @ key for two seconds on each handset to power off.

| The child handset will not function in quiz The child's phone is in phone mode. WARNING: ater ay seconds of inactivity, phones turn off. To start a new call, you need mode and the number keys are unresponsive. | Press on the @) key to hang up and play tn nreace hnt' Ta | a Oc ogee heen ARs eae camel If the parents phone is turned off when the child tries to call him, he will hear a message prompting him to call back Later. If the childs phone is turned off or hes playing, the parent will hear a busy tone and must call back later When switched off, the phones can not receive or make calls. The Bluetooth wireless technology is deactivated when one of the phones is switched off. The green light will be off. When both phones are in talking mode with the Bluetooth wireless technology on, they will never switch off. So remember to hang up to preserve battery life!

P= sone tennis The parent's phone is unresponsive. The parents phone can only be used to communicate with the childs phone. There are no games or quizzes. The Lock icon is just part of the phone design. The sound volume of the childs phone is too loud. The child's phone is fitted with a Try me tag that needs to be removed before giving the phone to the child. Once removed the sound level will be reduced to protect your childs hearing. If the volume is too low. Install new batteries. Phones are turned off: press the keys for 2 seconds to turn them on. Phones will automatically turn off after being unused for approximately 60 seconds. e Phones are too far apart. The ranae is If both phones dont work. If theres a continuous buzzing sound and the unit doesnt operate. Install new batteries. The communication doesnt stop. The product does not switch off automatically when voll are in canmmi nication After each 210mm approximately 50ft/15 m. The communication quality will depend on the distance and surrounding environment. You may need to move closer to the other phone. Batteries are drained out. Install new batteries. One phone does not connect with the other phone. Ifthe green light is not on, this means that the Bluetooth wireless technology is not activated. Switch the phones off and then on again. If they still don't light up, replace the batteries. Make sure that the phones are both switched on. Press onthe _ keys. If the phone does not respond, please install new batteries. The green lights are off It means that the phones are not connected via the Bluetooth wireless technology. Switch the phones off and then on again. If they still dont light up, replace the batteries. call, please switch off at least one of the two units to conserve battery power. I cant call another phone Both phones communicate exclusively with each other. es Cbs fe fe Do not aver tighten, Each phone requires 3 x AAA-R03-AM4 batteries When required, using a suitable screwdriver, unscrew and remove the battery cover located under the unit. Insert 3 x AAA-R03-AM4 batteries into the compartment ensuring they are installed in the correct direction. The polarities are marked inside the battery compartment. Should the batteries have no polarity markings, the flat end of the battery should always be inserted against the spring. Replace the battery cover and tighten the screw to secure.

Histon

$18040_EG_03_230515 EC ae scale 1:1 Web) ora units mm NOTE : Please confirm polarity markings are matching circuit diagram il Embossed in part Location on unit:

on BACK housing and Battery Door. oo"

FE CC Em Model: S22040 ca FCC ID: NXM-S22040 W's sia Loz

@ Diset, S.A. Diset Calle C, N 3, Sector B, Zona Franca, 08040 Barcelona (Spain) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-09-2023 FCC ID: NXM-S22040 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Diset, S.A. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Diset, S.A. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Cover List Link: (https://www. fec.gov/supplychain/coveredlist) Applicant: Diset, S.A. Address: Calle C, No. 3, Sector B, Zona Franca, 08040 Barcelona, Spain. Contact Person: Karine Matringe Tel.: +33 4 74 99 06 60 Email: karine.matringe@jumboplay.com Sincerely, Rev 2/6/2023

ee Diset, S.A. Diset Calle C, N 3, Sector B, Zona Franca, 08040 Barcelona (Spain) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.8.10 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: [NXM-S22040}

Applicant FRN: [0021750112]

(DISET, S.A] (the applicant) certifies that, as of the date of the filing of the application, [Kidz Delight, Ltd.] is our designated U.S. agent for service of process for the above referenced FCC iD. [DISET, S Al accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

[Kidz Delight, Ltd.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: [Kidz Delight, Ltd.}

U.S. Agent FRN: [0034073551]

Address: [1431 Opus Place Suite 110, Downers Grove, illinois, IL 60515, USA. ]

Contact Person: [Luis Bravo]

Tel.: [1 855 425 8869]

Email: [tech@diset.com]

Sincerely, DISET. SA} [ha Delight, Lid.)

[Karine Matringe] [Luis Bravo] " /

| (Applicant signature

[U.S. Agent signaturey fe Rev 1/26/2023

Confidentiality Reque t Letter SCS-F019: Confidentiality Request Letter Page | of 2 Reason for Amendment (current / obsolete) Initial Release obsolete Addin CFR 2.459 obsolete Updated company template & Added text box obsolete Added IC confidentiality letter form obsolete) Corrections to STC form. Added reference to KDB obsolete U datedcom an lo o current U dated References and Contact Info Revision Histo From Approved Date Nov-14-2006 Au ust 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 u -30-2020 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: htt s:/Awww.c s.bureauveritas.com/

SCS-F019: Confidentiality Request Letter Page 2 of 2 2023.8.10 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakiand Mills Road Columbia, MD 21046-1609 Ce:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: NXM-S22040 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Exhibit CD Short Term 1 Short Term C1 Short Term C1 Short Term C1 Short Term CJ Short Term CZ Short Term C1 Short Term CJ Short Term Permanent 7 Permanent

[] Permanent LJ Permanent O Permanent

] Permanent CO Permanent Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos User's Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 (]

or 180 [1] days; or for a specified date of not to exceed 180 days from the Grant Date The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client's ure Cli @: K nge Title: 0 ons&Development Manager Contact information / address : Calle C, No. 3, Sector B, Zona Franca, 08040 Barcelona, Spain. Permanent confidentiality may be requested in accordance with FCC KDB 726920 DISET, S.A.

@ Diset, S.A. Diset Calle C, N2 3, Sector B, Zona Franca, 08040 Barcelona (Spain) To: Bureau Veritas Shenzhen Co., Ltd., Dongguan Branch Declaration Letter

| (DISET, S.A.), the undersigned, declares that the products S22040/i22040 (FCC ID:

NXM-S22040) have only Bluetooth EDR mode for the normal function mode. The Bluetooth chip AC6956C4 and AC6956C8 have EDR and BLE modes with independent Bluetooth protocol for each mode. In the software, it only enables the EDR mode and keeps the BLE mode closed, so that it only uses EDR protocol in working mode. And there is no way for user to enable the BLE mode either. Karine Ma! wo aim DEvlopm gia 11-August-2023

Hereby, Name of manufacturer: DISET, S.A. Calle C, No. 3, Sector B, Zona Franca, 08040 Barcelona, Address: Spain. City: BARCELONA Country: S ain declares that:

Product description: MY FIRST SMARTPHONE SET Type designation(s): i22040 Trademark: NA Family name is technically identical to:

Product description: MY FIRST SMARTPHONE SET Type designation: $22040 Trademark: NA Certificate number

(if applicable) It identical with the test model S$22040 except the model number and name for trading purpose. 2023.8.10 BARCELONA Karine Matrin e Date:

City:

Name:

Signature DISET, S.A. Declaration of Identical Product