SIZE:210*90mm Dap Dual Wireless Charging Pad Instruction Manual XO-9540 FCC ID: 2ALCFXO-9540 Features:
1. 2. 3. 4. 5. LED Indicator Light (A) Charging Pad Surface (A) Charging Pad Surface (B) LED Indicator Light (B) USB Input Cable Whats included:
1 x Dual Wireless Charger 1 x Instruction Manual Input: 5V/2.1A Wireless Output: 5V/1A individually INSTRUCTIONS:
1. a. Connect the provided USB cable to the USB plug adapter. LED Indicator will turn Green when ready to charge. Charging Mobile Devices:
Ensure that your phone or tablet supports wireless charging. It will be listed in the Place the enabled device on one of the surfaces of the wireless charging pad. The device should display charging indicator. When completely charged, remove the device from the charging pad. Note: While charging, the indicator light will illuminate Blue. SAFETY PRECAUTIONS:
Read all the instructions before using the product. WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F (0C) or above 115F (45C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close b. 2. a. b. c.
*
1. 2. 3. 4. 5. supervision is required when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the 6. 7. 8. Do not use the device if damaged or 9. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
(1)
(2) explosion or risk of injury. Do not disassemble the device. For repairs, 10.
*
Warning:
Incorrect reassembly may result in a risk of 11. or temperatures above 104F (40C) may result in explosion. To ensure product safety, ensure that 12. identical replacement parts. WIRELESS CHARGING ENABLED DEVICES:
Apple iPhone: 8, 8 Plus, X, Xs, Xs Max, XR. Samsung Galaxy: Note 9, S9, S9+, Note 8, S8, S8+, S7, S7 Edge, Note 5, S6, S6 Edge Sony: Xperia XZ3, Xperia XZ2 Premium, Xperia XZ2 LG: G7 ThinQ, V30, G6 (US version only), G4
(optional), G3 (optional) Nokia: 8 Sirocco Huawei: Mate RS Porsche Design Microsoft Lumia: 1520, 1020, 930, 929, 928, 920 Google Nexus: 4, 5, 6, 7 (2013) approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, i f not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements:
This equipment complies with FCCradiation exposure limits set forth for an uncontrolled environment .This equipment shall be installed and operated with minimum distance 20cm between the radiator & body MADE IN CHINA