Spin-it Widget Bluetooth Speaker Instruction Manual XO-9331 2 1 3 1. 2. 3. Power ON/OFF Bluetooth Speaker Charging input port Whats included:
1 x Spin-it Widget Bluetooth Speaker 1 x USB to Micro-USB charging cable 1 x Instruction Manual Tech Specications Charging input: 5V/200mA Built-in 55mAh/3.7V lithium ion battery Battery capacity: 0.2035 Watt Hour Playback time at max volume: up to 15 minutes Instructions:
1. a. Charging the speaker:
Using a regulated USB adapter. Connect a USB cable to your USB adapter. Using the Micro-USB connector, connect the other end of the USB cable to the DC 5V port on the speaker. Plug the USB adapter into the outlet to begin charging. Using your computer. Connect a USB cable to a USB outlet on your computer. Using the Micro-USB connector, connect the other end of the USB cable to an DC 5V port on the speaker. Make sure the computer is on to begin charging the speaker. It takes around 20 minutes to charge the speaker from 0 to 100%. Connecting the speaker with Bluetooth:
Switch the speaker ON using the ON/OFF switch. The red, blue, and green LEDs will light all around the Spin-it Widget. Using a Bluetooth enabled device, search for Spin-It Widget from the list of available pairs. Once selected, the connection is successful. If the switch is turned off, the bluetooth connection will disconnect. Using the speaker:
Once connected, use the mobile device to control all audio functions. Note: In order to charge the device use only the provided USB charging cable or the cable included with your own device by the manufacturer. b. c. 2. a. 3. a.
*
SAFETY PRECAUTIONS:
WARNINGWhen using this product, basic precautions should always be followed, including the following:
Read all the instructions before using the product. Device main unit contains an internal lithium-ion battery. Upon initial use or after a prolonged storage period, fully charge it once. The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture. Use of a power supply or charger not recommended or sold by device manufacturer may result in a risk of re or injury to persons. Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of re or injury. Do not use the device if damaged or modied. Damaged or modied batteries may exhibit unpredictable behavior resulting in re, explosion or risk of injury. Do not disassemble the device. Take it to a qualied service person when service or repair is required. Incorrect reassembly may result in a risk of re or injury. Do not expose a device to re or excessive temperature. Exposure to re or temperatures above 212F may cause explosion. Have services performed by a qualied repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. Do not charge the device while using the 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. device to charge another device. Do not charge the device for more than 4-6 hours and do not leave unattended. Switch off the device when not in use. 13. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
(1)
(2)
*
Warning:
Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. MADE IN CHINA