DA803S Hybrid Integrated Amplifier BLUETOOTH CONNECTION 1. Switch on Bluetooth function on smart devices and search for DA803 BT and CONNECT. 2. If the amplifier cannot be connected, please try to remove the previous saved devices and redo above step 1. ACCESSORIES 1. Power cord 2. USB Cable 3. Users Guide 4. Antenna ACCESSORIES Output Power Frequency Range S/N Ratio Output Impedance Input Source Bluetooth Version Bluetooth Name USB DAC Name Voltage Max. Consumption Power Tubes Dimension Weight 2x35W 20Hz - 20kHz 86db 4, 8 LINE IN, AUX, BLUETOOTH, USB DAC CSR4.0 SUPPORT APTX DA803 BT DA803 DAC 115/230AC 50/60Hz 120W 6N1, 6N2, 6E2 176 x 274 x 131 mm 4.5 kg 3 USERS GUIDE
Thank you for choosing DORCHASE DA803S Hybrid Integrated Amplifier Please take time to read this guide carefully before installing your speakers to this amplifier as it contains all the information you need to achieve optimal sound and performance. We highly recommend you retain both packaing and this Users Guide for future use. SAFETY REMINDER Cautions! To reduce the risk of electric shock, do not remove any screws of this amplifier. CONNECT TO THE SPEAKERS AND SOURCE 1. Before connecting the amplifier, make sure it is POWER OFF. 2. Make sure the connection of the amplifier and other equipments are 3. Connect the speaker wires to the amplifiers at the right terminals. 4. Assemble the Bluetooth Antenna pointing upwards. 1. Volume control 2. UV Meter 3. 3.5 jack 4. Input 5. Tube 6N2 6. Tube 6N1 7. Tube 6E1 8. LINE IN 9. PRE-OUT 10. AUX (3.5 jack) 11. Bluetooth Antenna 12. USB/DAC Connector 13. Right Speaker Out 14. Left Speaker Out 15. Power Switch 16. Fuel 17. 115V/230V Switch
(MUST SET THE CORRECT VOLTAGE BEFORE SWITCH-
ING ON THE AMPLIFIER Left Speaker 1 2 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.