FCC ID: 2BCUZ-EMPOWER1 Empower Wireless Charger

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Page 1 of 1 FCC ID: 2BCUZ-EMPOWER1 LABEL AND LOCATION Empower Wireless Charger Model: EMPOWER1 FCC ID: 2BCUZ-EMPOWER1

(Size: L4.0cm x 2.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Dreem LLC Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 9/25/2023 Dreem LLC acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BCUZ-EMPOWER1):

Name and company of U.S. agent:

Dreem LLC Physical U.S. address of agent:

30 N Gould St, Suite 4000 Sheridan, WY 82801 United States FRN of U.S. agent:

0034235556 Email address of U.S. agent:

compliance@dreem.one Dreem LLC acknowledges their obligation to accept service of process on behalf of Dreem LLC. Dreem LLC with the FRN 0034235556 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Jeromi Stewart Chairman Dreem LLC Signature Jeromi Stewart Chairman Dreem LLC 5 0 V

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BCUZ-EMPOWER1 Model name EMPOWER1 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics the Parts Lists the Tune Up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-09-25 Signature Date Printed Name of Signee / Title: Jeromi Stewart / Chairman Company: Dreem LLC Address: 30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Phone: +1-503-547-5555 Email: compliance@dreem.one Fax: +1-650-618-0190

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Dreem LLC Address:

30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Phone: +1-503-547-5555 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-09-25 Signature Date Printed Name of Signee / Title: Jeromi Stewart / Chairman Company: Dreem LLC Address: 30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Phone: +1-503-547-5555 Email: compliance@dreem.one Fax: +1-650-618-0190

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BCUZ-EMPOWER1 Model name EMPOWER1 We, applicant Company Name: Dreem LLC Address:

30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Phone: +1-503-547-5555 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-09-25 Signature Date Printed Name of Signee / Title: Jeromi Stewart / Chairman Company: Dreem LLC Address: 30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Phone: +1-503-547-5555 Email: compliance@dreem.one Fax: +1-650-618-0190

Dreem LLC 30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Date: September 25, 2023 FCC ID: 2BCUZ-EMPOWER1 Model Number: EMPOWER1 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Dreem LLC hereby declare that our product (Empower Wireless Charger) Model Number: EMPOWER1 meet item 5.2 of KDB 680106v03r01 as follow;

Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes Output power from each primary coil is less than or equal to 15 watts. Yes The system may consist of more than one source primary coils, charging one or more clients. If more than one primary coil is present, the coil pairs may be powered on at the same time. Yes The device operate in the frequency range is 111 KHz 205 KHz The device supports one primary coils, the maximum output power of the primary coil is 15W Charging systems supports one primary coils and clients that are able to detect and allow coupling only between individual pairs of coils and the coils pairs power on at the same time. Client device is placed directly in contact with the transmitter. Yes Client device is placed directly in contact with the transmitter Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. Yes Mobile exposure condition only Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Dreem LLC 30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Please contact me if you have any question. Sincerely,

(Signed) Name/Title: Jeromi Stewart / Chairman Company: Dreem LLC Address: 30 N Gould St, Suite 4000 Sheridan Washington 82801, United States Tel: +1-503-547-5555 Fax: +1-650-618-0190 E-Mail: compliance@dreem.one