USER MANUAL EGG200062 Triple coil embedded system 10W Product overview The Triple coil embedded system is a wireless charging module designed to be integrated in any surface. Using the provided adhesive mounting tape, it can be installed under slim surfaces (maximum 5 mm thickness). No need for screws: the installation process is quick and easy, and the charger can be removed without damaging the top. The Triple coil embedded system is Qi certied and works with any Qi-certied device. A triple-coil system ensures high positioning freedom. Maximum power delivered is 10W. How to use 1. Remove the layer on the adhesive mounting tape. 2. Apply under surface. Works with most non-metal surfaces. 3. Connect the cable to the power source. 4. Lay down any Qi-enabled smartphone on the wireless charging area to start charging. Features Certied with WPC Qi 1.2.4 Designed for integration: a completely hidden solution Industrial adhesive mounting tape, no need for screws Quick and practical installation process, easy charger removal without damaging the top Maximum power 10W Triple coil free positioning technology allows wider charging area compared to standard solutions Designed to be installed under surfaces with maximum thickness of 5 mm
(0.19 in) Designed in two variants:
Variant 01: two power input lines Variant 02: two power input lines and one output Status Signal (SS). The SS is controlled by the system and its function is to indicate if a device is in charge (3.3V output) or not (Open Drain - HiZ output) Specications Physical specications Dimensions: 61 x 103 x 9 mm (2.40 x 4.05 x 0.35 in) | Weight: 2 pin (V01): 87g (0.19 Ibs); 3 pin (V02): 90g (0.20 Ibs) | Cable length: 65 cm (1.47 ft). Electrical specications Input Min 11.4V Max 14.5V | Input current Max 1A | Output wireless 10W | Average Standby mode consumption ~ 25 mA | Storage temperature -10C / 70C |
Operating temperature 0C / 40C | Operating frequency 110.1-205KHz. Pin Output Variant 01: Triple coil embedded system 2 pin MOLEX 430250200 Pin 1 signal: 12V Pin 2 signal: GND Pin Output Variant 02: Triple coil embedded system 3 pin MOLEX 436450300 Pin 1 signal: 12V Pin 2 signal: status signal Pin 3 signal: GND Technical drawings Variant 01: Triple coil embedded system 2 pin Item Number Part number Description Material Quantity 1 2 3 4 5 6 7 8 EGGM200001 - V01R01 -
Shell bottom Bottom Cover ABS EGGTX025_S01G01 PCB Assembly FR4 EGGM200002 - V01R01 -
Shell top Upper Cover ABS EGG190098 - E01 -
TripleCoil Wireless charging coil A24 Litz wire + ferrite EGG190098 - E02 -
Cable 2 wires cable Copper wire EGGM210014 -
Biadhesive Adhesive tape -
OCS5030GP White ash Acrylic EGG190098 - E03 -
Connector Nylon MOLEX 430250200. Polarization:
PIN1: 12V - Red PIN2: GND -
Black EGGM210015 - Cable grommet Cable grommet Esalstomer 1 1 1 1 1 1 1 1 Genera l tolererance Nominal lengths [mm] table 0.1 0.1 0.2 0.3 External Radius and Chamfer Height 0.2 0.5 Angular dimension 1 030 020 0.5 up to 3 3 up to 6 6 up to 30 30 up to 120 0.5 up to 3 3 up to 6 up to 10 over 10 up to 50 over 50 up to 120 Safety information Please read this safety information carefully before using the product to prevent injury to yourself or others and damage to your device. Please keep this manual for future reference. Do not damage the cable. Doing so may cause electric shock or re. Keep the product away from hot surfaces and sharp corners. Do not carry or drag the product by the cable. Do not use the product if one or more of its components are damaged or faulty. The product contains electronic parts. Keep your device dry. Humidity and liquids may damage the electronic circuits of the device and may cause electric shock and re. Handle with care. Do not drop your device. It may get damaged or may malfunction. Do not place any metal object on the charger, as it may overheat. Do not place any other object between the smartphone and the wireless charging spot. Do not store magnetic cards near the product. Magnetic cards, including credit cards, phone cards and boarding passes may be damaged by magnetic elds. Handle the product with care. Do not drop your device. It may get damaged or may malfunction. Do not disassemble, modify, or repair your charger. Any alteration or modication of your device may void the manufacturers warranty. If your device needs servicing, contact the manufacturer. Do not modify the product in any way. Any modication may increase the risk of injury. Do not bite or suck on the device. Doing so may damage the device or result in an explosion or re. Children may choke on small parts. If children use the device, make sure that they use it properly. Warning: choking hazard. Keep out of the reach of children. If you notice strange smells or smoke coming from your device, stop using it immediately. Continuing to use the device may result in re or explosion. Do not use the device for anything other than its intended use. The device may malfunction or may cause an electric shock or re. Never dispose of the device in a re. Avoid exposing your device to very cold or very hot temperatures. Do not throw away the product with the household trash. The product needs to be recycled and disposed of responsibly. Limited warranty For product warranty visit our website at the page www.eggtronic.com/support/download-area This product is meant for use only with appropriate devices. Please consult your device packaging to determine whether this product is compatible with your particular device. Manufacturer will not be responsible for any damages you or any third party that may suffer as a result of use, intended or unintended, or misuse of this product. You agree to indemnify Manufacturer for any resulting injury or damage if the product is used with an unintended device. Product names, logos, brands and other trademarks referred to within this product are property of their respective trademark holders. These trademark holders are not afliated with our company, our products or our website. They do not sponsor or endorse our materials. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.