FCC ID: WL6-7921EP20AN 2TX 11ax(WiFi6)+BLE Combo card

by: ELITEGROUP COMPUTER SYSTEMS CO., LTD latest update: 2024-04-23 model: 7921EP20AN

Nine grants have been issued under this FCC ID from 11/22/2023 to 04/23/2024 (this is one of six releases in 2024 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked password defaults, instructions, troubleshooting guides, warrantee terms, & drivers.
permalink for this FCC identifier
product lifecycle: new release
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 8 9 Users Manual Users Manual pdf 1.83 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Internal Photos Internal Photos pdf 1.41 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 External Photos External Photos pdf 2.99 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 ID Label ID Label/Location Info pdf 246.86 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 ID Label/Location Info ID Label/Location Info pdf 1008.12 KiB November 17 2023 / November 22 2023
1 2 3 4 5 6 7 8 9 Label Location Info ID Label/Location Info pdf 546.18 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Antenna Specification Test Report pdf 3.70 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Block Diagram Block Diagram pdf January 08 2024 confidential
1 2 3 4 5 6 7 8 9 Covered list Attestation Statement Attestation Statements pdf 62.24 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Declaration of Authorization Cover Letter(s) pdf 49.76 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 FCC Class II permissive change letter Cover Letter(s) pdf 161.28 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Operational Description Operational Description pdf January 08 2024 confidential
1 2 3 4 5 6 7 8 9 Schematics Schematics pdf January 08 2024 confidential
1 2 3 4 5 6 7 8 9 Test Report SAR RF Exposure Info pdf 1.22 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix A System Check Data RF Exposure Info pdf 189.73 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix B Highest Measurement Data-Plot No. RF Exposure Info pdf 266.57 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix D Probe Calibration RF Exposure Info pdf 2.34 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix E Dipole Source Calibration RF Exposure Info pdf 3.80 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Setup Photos Test Setup Photos pdf 685.64 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 U.S. Agent Authorized Letter Attestation Statements pdf 539.40 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 confidentiality Cover Letter(s) pdf 65.58 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Change ID Declaration letter Cover Letter(s) pdf 42.99 KiB November 17 2023 / November 22 2023
1 2 3 4 5 6 7 8 9 Change in ID Authorization Letter Cover Letter(s) pdf 246.19 KiB November 17 2023 / November 22 2023
1 2 3 4 5 6 7 8 9 US Agent Letter Attestation Statements pdf 553.54 KiB November 17 2023 / November 22 2023
1 2 3 4 5 6 7 8 9 Users Manual Users Manual pdf 1.83 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Internal Photos Internal Photos pdf 1.41 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 External Photos External Photos pdf 2.99 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 ID Label ID Label/Location Info pdf 246.86 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 ID Label/Location Info ID Label/Location Info pdf 1008.12 KiB November 17 2023 / November 22 2023
1 2 3 4 5 6 7 8 9 Label Location Info ID Label/Location Info pdf 546.18 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Antenna Specification Test Report pdf 3.70 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Covered list Attestation Statement Attestation Statements pdf 62.24 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Declaration of Authorization Cover Letter(s) pdf 49.76 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 FCC Class II permissive change letter Cover Letter(s) pdf 161.28 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR RF Exposure Info pdf 1.22 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix A System Check Data RF Exposure Info pdf 189.73 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix B Highest Measurement Data-Plot No. RF Exposure Info pdf 266.57 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix D Probe Calibration RF Exposure Info pdf 2.34 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix E Dipole Source Calibration RF Exposure Info pdf 3.80 MiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Test Setup Photos Test Setup Photos pdf 685.64 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 U.S. Agent Authorized Letter Attestation Statements pdf 539.40 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 confidentiality Cover Letter(s) pdf 65.58 KiB January 08 2024 / January 09 2024
1 2 3 4 5 6 7 8 9 Change ID Declaration letter Cover Letter(s) pdf 42.99 KiB November 17 2023 / November 22 2023
1 2 3 4 5 6 7 8 9 Change in ID Authorization Letter Cover Letter(s) pdf 246.19 KiB November 17 2023 / November 22 2023
1 2 3 4 5 6 7 8 9 US Agent Letter Attestation Statements pdf 553.54 KiB November 17 2023 / November 22 2023

frequency equipment class purpose
1 2024-04-23 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2412 ~ 2472 DTS - Digital Transmission System
4 2024-01-09 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
5 2412 ~ 2472 DTS - Digital Transmission System
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2023-11-22 2412 ~ 2472 DTS - Digital Transmission System Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020
8 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 8 9 Effective 2024-04-23
1 2 3 4 5 6 7 8 9 2024-01-09
1 2 3 4 5 6 7 8 9 2023-11-22
1 2 3 4 5 6 7 8 9 Applicant's complete, legal business name ELITEGROUP COMPUTER SYSTEMS CO., LTD
1 2 3 4 5 6 7 8 9 FCC Registration Number (FRN) 0018032326
1 2 3 4 5 6 7 8 9 Physical Address 9F, No. 22-1, Sec. 3, Zhongshan N.Rd., Taiwan
1 2 3 4 5 6 7 8 9 Taipei, N/A
1 2 3 4 5 6 7 8 9 Taiwan
app s TCB Information
1 2 3 4 5 6 7 8 9 TCB Application Email Address c******@telefication.com
1 2 3 4 5 6 7 8 9 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 7 8 9 Grantee Code WL6
1 2 3 4 5 6 7 8 9 Equipment Product Code 7921EP20AN
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 8 9 Name T******** L********
1 2 3 4 5 6 7 8 9 Title Manager
1 2 3 4 5 6 7 8 9 Telephone Number 886-2******** Extension:
1 2 3 4 5 6 7 8 9 Fax Number 886-2********
1 2 3 4 5 6 7 8 9 E-mail t******@ecs.com.tw
app s Technical Contact
1 2 3 4 5 6 7 8 9 Firm Name DEKRA Testing and Certification Co., Ltd.
1 2 3 4 5 6 7 8 9 Name A**** C****
1 2 3 4 5 6 7 8 9 Physical Address No.26, Huaya 1st Rd.
1 2 3 4 5 6 7 8 9 No.26, Huaya 1st Rd., Guishan Dist., Taoyuan City
1 2 3 4 5 6 7 8 9 Taoyuan City
1 2 3 4 5 6 7 8 9 Taiwan
1 2 3 4 5 6 7 8 9 Telephone Number +8863********
1 2 3 4 5 6 7 8 9 Fax Number 886-3********
1 2 3 4 5 6 7 8 9 E-mail a******@dekra.com
app s Non Technical Contact
1 2 3 4 5 6 7 8 9 Firm Name DEKRA Testing and Certification Co., Ltd.
1 2 3 4 5 6 7 8 9 Name A****** C****
1 2 3 4 5 6 7 8 9 Physical Address No.26, Huaya 1st Rd.
1 2 3 4 5 6 7 8 9 No.26, Huaya 1st Rd., Guishan Dist., Taoyuan City
1 2 3 4 5 6 7 8 9 Taoyuan City
1 2 3 4 5 6 7 8 9 Taiwan
1 2 3 4 5 6 7 8 9 Telephone Number +8863********
1 2 3 4 5 6 7 8 9 Fax Number 886-3********
1 2 3 4 5 6 7 8 9 E-mail a******@dekra.com
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 8 9 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 9 No
1 2 3 4 5 6 7 8 9 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 8 9 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 8 9 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 8 9 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 8 9 DTS - Digital Transmission System
1 2 3 4 5 6 7 8 9 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)2TX 11ax(WiFi6)+BLE Combo card
1 2 3 4 5 6 7 8 9 2TX 11ac(WiFi6)+BLE Combo card
1 2 3 4 5 6 7 8 9 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 7 8 9 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 8 9 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 8 9 Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020
1 2 3 4 5 6 7 8 9 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 8 9 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 8 9 Grant CommentsClass II Permissive Change. This change is : (a) The certified module is integrated into a new platform (Product: Notebook Computer, Brand: ELITEGROUP COMPUTER SYSTEM CO., LTD, Model: EP20AN1C). The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.17 W/kg and 0.31 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Class II Permissive Change. This change is : (a) The certified module is integrated into a new platform (Product: Notebook Computer, Brand: ELITEGROUP COMPUTER SYSTEM CO., LTD, Model: EP20AN1C). The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.03 W/kg and 0.31 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 7 8 9 Class II Permissive Change. This change is : (a) The certified module is integrated into a new platform (Product: Notebook Computer, Brand: ELITEGROUP COMPUTER SYSTEM CO., LTD, Model: EP20AN1C). The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.04 W/kg and 0.10 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : ELITEGROUP COMPUTER SYSTEMS CO., LTD / EP20AN2C) with new antennas as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.04 W/kg and 1.41 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : ELITEGROUP COMPUTER SYSTEMS CO., LTD / EP20AN2C) with new antennas as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.71 W/kg and 1.42 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50 W/kg and 0.93 W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : ELITEGROUP COMPUTER SYSTEMS CO., LTD / EP20AN2C) with new antennas as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.12 W/kg and 1.42 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43 W/kg and 1.20 W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 7 8 9 Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 7 8 9 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 8 9 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 8 9 Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
1 2 3 4 5 6 7 8 9 Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
1 2 3 4 5 6 7 8 9 Name M****** L******
1 2 3 4 5 6 7 8 9 K**** L****
1 2 3 4 5 6 7 8 9 Telephone Number +886-********
1 2 3 4 5 6 7 8 9 +886-********
1 2 3 4 5 6 7 8 9 Fax Number +886-********
1 2 3 4 5 6 7 8 9 +886-********
1 2 3 4 5 6 7 8 9 E-mail m******@dekra.com
1 2 3 4 5 6 7 8 9 k******@bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.152
1 2 15E CC MO ND 5260 5320 0.154
1 3 15E CC MO ND 5500 5720 0.158
1 4 15E CC MO 5745 5825 0.196
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.015
3 2 15C CC MO 2412 2472 0.843
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.152
4 2 15E CC MO ND 5260 5320 0.154
4 3 15E CC MO ND 5500 5720 0.158
4 4 15E CC MO 5745 5825 0.196
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.015
5 2 15C CC MO 2412 2472 0.843
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.015
7 2 15C CC MO 2412 2472 0.843
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.152
8 2 15E CC MO ND 5260 5320 0.154
8 3 15E CC MO ND 5500 5720 0.158
8 4 15E CC MO 5745 5825 0.196
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0150000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC