FCC ID: VE3-STS2 ScripTalk Station 2

S T A T I O N 2 QUICK START GUIDE Congratulations on your new ScripTalk Station 2! This Quick Start Guide will help you get started on your way to safety, privacy and independence in managing your prescription medications. Whats In the Box?

ScripTalk Station 2 Reader Sample Bottle 4 AA Batteries 2 Power Adapter The Buttons On/Off Volume Switch There is an On/Off Volume switch and three buttons that will allow you to operate the reader and access the information on your prescription labels. 3 About the Electronic Label The talking label may be found:

your bottle or container

your bottle or box Due to packaging or medicine content, your label may be attached as an annex tag. To access the electronic label, lift it away from the package when scanning. 4 Powering the Unit Connect the USB cable adapter to the port on the left side of the reader. Then plug the adapter into a power source. You can also use 4 AA alkaline batteries to power your unit. The battery access door is on the back of the unit. If you are using batteries and forget to turn the unit off, it will beep every couple of minutes to remind you to turn it off. 5 Power and Volume Control Turn the thumbwheel switch clockwise to power on the unit. To adjust the volume, turn the thumbwheel. To shut off the unit, turn the thumbwheel counter-clockwise until you hear a click. 6 On-Board Help To listen to the instructions on how to use the unit, press and hold READ for about three seconds. To stop the instructions, press READ again. Three Seconds Press Next or Previous to move through the different topics. 7 Reading a Prescription Label

beeping.

reader.

8 Scrolling Through the Information While the unit is speaking the label information, you can press NEXT or PREVIOUS to move through the information or to repeat an item. 9 Troubleshooting Place your prescriptions on the reader individually. The unit can only read one label at a time. If the unit cannot find or read a label, it will give you a warning. Have a sighted friend or a family member read the label for you, and talk to your pharmacist to see about a new label. 10 Warning! Unable to Read Label. Changing the Voice Speed To change the voice speed, press and hold NEXT or PREVIOUS for three seconds, then press NEXT or PREVIOUS to find the speed you like. Press READ to set the speed. 3 Seconds Select Save 11 Spell Mode You can have the information spelled out if you dont understand a word. Select the slowest setting in voice speed. It will say Spell Mode. Press READ to select, then scan your label. Reset voice speed to exit. 12 Accessories A handy travel bag is available for your convenience. The insulated zippered bag is designed to hold your reader as well as your medications. And its perfect for trips or organization of your medications. ScripTalk Travel Case Headphones

$24.99

$15.99 13 For more information or assistance, please contact us at:

En-Vision America 825 4th St W Palmetto, FL 34221 Toll Free: (800) 890-1180 Fax (309) 452-3643 frontdesk@envisionamerica.com www.envisionamerica.com STS2V1.0

Reference No.: WTX20X09066232W Page 1 of 10 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn

-Vici En-Vision America, Inc. En-Vision America, Inc. AMERICA. Palmetto, FL 34221 Date: 04/01/21 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: VE3-STS2 Confidentiality Request To whom it may concern, Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of the information accompanying this application as outlined below:

XIBlock Diagram Tune-Up Information KlOperational Description Security Information XISchematics Software Defined Radio (SDR) Information klParts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature:

David Raistrick President

En-Vision En-Vision Ameriga Inc. AM E R I CA. Felmatts, EL 34221 Date: 04/01/21 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: VE3-STS2 Declaration of Authorization To whom it may concern,

|, the undersigned, hereby authorize, Jandy So, of Waltek Testing Group (Shenzhen) Co., Ltd.,

(WALTEK) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jandy So, of Waltek Testing Group (Shenzhen) Co., Ltd., (WALTEK) on our behalf shall have the same effects as acts of our own.

|, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C 853(a). This authorization is valid until further written notice from the applicant. Sincerely, Signature:

David Raistrick President