Headset MMI
(Make sure inserting audio cable with correct direction otherwise Microphone will not work) A: Touch Control Area B: Multifunction Button (MFB) C: Audio Jack D: USB Connector E: Status/Battery LED Indicator F: NFC Pad 2 Connect to Bluetooth Devices Fill Wireless is able to simultaneously connect with two bluetooth devices Used Fiil Wireless Headset: Press and Hold MFB untill "Fiil" LED blinks. Step 1: Pairing New Fiil Wireless Headset: Press and Hold MFB until power on, headset will automatically enter pairing mode Step1 Fiil Wireless Fiil Fiil Step2 APP5il+ APP NFCNFCNFC NFC3 Fiil Wireless. Fiil Wireless Step 2: Connecting via APP: follow fiil+ APP indications to connect headset with device. via NFC: Power headset on, open device's NFC and touch Fiil wireless tag area. by Manual: Enter "Bluetooth" menu and "Search Bluetooth devices", connect Fiil Wireless in pairing mode. Wired Mode Use Audio cable to connect with devices. MFB Multifunction Button (MFB) Play/Pause: Power on and connect, short press MFB to play/Pause Power On/Off: Long press MFB untill green/red LED on Connect: initial connection by short press when no connection ANC On/Off: Dual press MFB Fiil Logo On/Off: Triple press MFB Active Siri: Bluetooth connected, press 2s MFB then release MFB Answer/End Call: When Incoming Call, short press MFB Reject Call: When Incoming Call, press 2s MFB MFB/
/
MFB
/ MFB
/FiilMFB siri/
2
//MFB MFB Touch Control Touch Control Vol +/: Sliding Up/Down Next/Prev: Sliding forward/backword
(Only workable with bluetooth compatiable devices)
//
//
//
/: /
Stepless Adjustment Vol +/: Press and Hold Up/Down FastForward/backword: Press and Hold Next/Prev. position (Only workable with bluetooth compatiable devices) Battery Level Indication A: Insert USB Cable will indicate battery level (Light off if battery is full) B: Short press MFB (when idle) Green: >80%
Yellow: 20%~80%
Red: 10%~20%
Blinking Red: <10%
Use Fiil+ APP to check battery level Even Battery is used out, Fiil Wireless is still able to play music with audio cable. Audio Cable Control
(iOS Cable) 1x 2x 3x 1x+2s 2x+HOLD 3x+HOLD
/
Play/Pause Next Prev. Reject Fast Forward Fast Backword Vol +
Vol Answer End Hold Answer/End Call Siri, or voice recognition Audio Cable Control Android
(Android Cable) Note: feature may varient with different Android devices 1x 2x 3x 1x+HOLD Vol +
/
Play/Pause Next Prev.
/
End/Reject Vol Answer Mute in call Product List in Pack Headset X1 x1 Android Cable X1 iOS Cable X1 IOS x1 x1 Clip X1 Pack X1 x1 x1 USB Cable X1 USB x1 Product Parameters This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled Environment. The USB port is for charge use only. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IC NOTICE TO CANADIAN USERS This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numrique de la Classe B conforme la norme NMB-003 du Canada). Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.