FG360-NA Hardware Guide Version: Draft V1.0.2 Date: 2021-05-06 Applicability Type NO. Product Model Description Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 2/28 Copyright Copyright 2021 Fibocom Wireless Inc. All rights reserved. Without the prior written permission of the copyright holder, any company or individual is prohibited to excerpt, copy any part of or the entire document, or distribute the document in any form. The document is subject to update from time to time owing to the product version upgrade or other reasons. Unless otherwise specified, the document only serves as the user guide. All the statements, information and suggestions contained in the document do not constitute any explicit or implicit guarantee. Notice Trademark The trademark is registered and owned by Fibocom Wireless Inc. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 3/28 Change History Version Author Update Date Remark V1.0.2 2021-05-06 Section 2.1.1: update band information Xu Shaofeng V1.0.1 Xu Xialin 2021-04-22 193,175,157,148,139,130 Section 2.1.1: add weight information Section 2.3: Add section 2.3 antenna configuration Section 3.1: Update pin name of Pin Section 4.1: Update module appearance Section 3.1: Add PCIe D as reserved and update pin name of Pin 3,265,38,39,41,44 V1.0.0 2021-03-09 Initial version Peng Yujun Xu Xialin Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 4/28 Contents 1 Foreword ........................................................................................................................ 6 1.1 Introduction ................................................................................................................... 6 2 Overview ........................................................................................................................ 6 2.1 Introduction ................................................................................................................... 6 2.1.1 Key Features ................................................................................................................... 6 Application Framework ................................................................................................. 9 Antenna Configuration ................................................................................................ 10 3 Pin Definition ............................................................................................................... 16 3.1 Pin Map ...................................................................................................................... 16 3.1.1 Table of Pin No. and Pin Name ..................................................................................... 17 3.1.2 Pin Definition ................................................................................................................. 19 4 Structural Specification .............................................................................................. 27 Product Appearance ................................................................................................... 27 Dimension of Structure ............................................................................................... 27 Storage ....................................................................................................................... 28 Packing....................................................................................................................... 28 2.2 2.3 4.1 4.2 4.3 4.4 Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 5/28 The document describes the electrical characteristics, RF performance, dimensions and application environment, etc. of FG360-NA (hereinafter referred to as FG360). With the assistance of the document and other instructions, the developers can quickly understand the hardware functions of FG360 modules 1 Foreword 1.1 Introduction and develop products. 2 Overview 2.1 Introduction The FG360 series module is a 5G module which supports NSA and SA network architectures. The FG360 integrates core devices such as Baseband, Memory, PMU, Transceiver, and PA. It supports 5G NR Sub6, FDD-LTE, TDD-LTE, and WCDMA long-distance communication modes. Supports uplink 22 MIMO and downlink 44 MIMO multi-antenna configuration in SA mode. It also supports GNSS wireless positioning technology. The FG360 is designed in an LGA package and is suitable for a variety of eMBB scenarios, such as CPE, VR/AR, gateway, TV box, and intelligent monitoring. 2.1.1 Key Features Table 2-1 Key features Performance Description LTE FDD: B2, B4, B7,B5, B12, B13,B14,B17,B25,B26,B30,B66, B71 Operating Band LTE TDD: B41 ,B48 NR: n2,n5,n7,n12,n14,n30,n25, n41, n66, n71,n77,n78, WCDMA/HSPA+: B2,B4,B5 GNSS Support GPS, GLONASS, Galileo, BDS, QZSS 3GPP Release 15 3GPP Release 15 UMTS 3GPP Release 8 NR LTE Feature NR:
DL 44 MIMO: n2,n25, n41, n66 UL 22MIMO: n41,n77,n78, Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 6/28 LTE:
DL 44MIMO: B2, B4, B7, B25,B30,B66 NSA and SA supported SRS: n41, Support: 1T2R, 1T4R, 2T4R HPUE: B41,ULCA B41, n41,n77,n78, SA 5G/NR Sub-6 Peak DL 4.67Gbps/UL 1.25Gbps NSA Peak DL 3.74Gbps/UL 700Mbps Data Transmission LTE DL 1.6Gbps (CAT19)/UL 211Mbps (CAT18) UMTS/HSPA+
DL UMTS: 384kbps/UL 384 kbps DL DC-HSPA+: 42 Mbps (CAT24)/UL 11.5Mbps
(CAT7) Power Supply DC: 3.3~4.4V, typical voltage: 3.8V Antenna Type:
External Antenna Gain:
<3.76dBi Normal operating temperature: -30~751 Temperature Extended operating temperature: -40~852 Physical characteristics Storage temperature: -40~85 Dimension: 41 mm44mm2.75 mm Package: 430 pin LGA Weight: about 12.0 g CPU ARM Cortex-A55, quad core, up to 2.0 GHz Memory 2GB LPDDR4x+32GB eMMC Flash Interface USB Interface PCIe Interface SIM Interface I2C ADCs Software USB2.0 high speed (HS) interface, data transmission rate up to 480Mbps USB3.0 Super-speed (SS) interface, data transmission rate up to 5Gbps PCIe Gen3 2Lane1, PCIe Gen3 1Lane2 (PCIe only support RC mode) Dual SIM: 1.8V/3V SIM1: USIM SIM2: ESIM/USIM One set of I2C interface, data transmission rate up to 400Kbit/s A/D conversion channel, Voltage Range: 0~1.45V Firmware update USB/PCIe/FOTA Operating System Linux/Android/Windows Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 7/28 Note 1. When temperature keeps in the range of -30~75C, the module can work normally. Module performance meets the 3GPP specifications. 2. When temperature keeps in the range of -40~85C, module performance may be slightly out of 3GPP specifications. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 8/28 2.2 Application Framework The application framework below shows the main hardware functions of the FG360 module:
Baseband RF transceiver PMU Memory Peripheral interface Figure 2-1 Hardware block diagram Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 9/28 Main PMUETTRX BlocksTransceiverDRFRFFERFFERXTXBasebandeMCPeMMCLPDDR4XBBCLK26MHzRFCLK26MHzSleep CLK32KHzSPMIANT0ANT1ANT2ANT3ANT4ANT5GNSSPWRKEYRESET_NVBATJTAGUSIM1SDIOPCIe3.0Coex UARTI2SSGMIIGPIO/EINTUSB2.0/3.0UARTeSIMI2CSPIADCsMIPIDSI26MHzCrystalSub PMU 2.3 Antenna Configuration 2.4 Waring 2.4.1 Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify compliance as a composite system. When testing the host device for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band emissions). The host manufacturer must verify that there are no additional unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s). The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if needed. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 10/28 Important Note wish to change notice that any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify to Fibocom Wireless Inc. that they the antenna trace design. In this case, a Class II permissive change application is required to be filed by the USI, or the host manufacturer can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application. End Product Labeling When the module is installed in the host device, the FCC/IC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: Contains The FCC ID/IC ID can be used only when all FCC/IC compliance requirements are met. FCC ID: ZMOFG360NA Contains IC: 21374-FG360NA Antenna Installation
(1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
(2) The transmitter module may not be co-located with any other transmitter or antenna.
(3) Only antennas of the same type and with equal or less gains as shown below may be used with this module. Other types of antennas and/or higher gain antennas may require additional authorization for operation.
(4)The max allowed antenna gain is 3.76dBi for external monopole antenna. In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC/IC authorization is no longer considered valid and the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 11/28 2.4.2 FCC Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator &
your body. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 12/28 2.4.3 IC Statement Industry Canada Statement following two conditions:
(1) This device may not cause interference; and This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 13/28 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or colocation with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-
evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 21374-FG360NA. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante:
"Contient des IC: 21374-FG360NA ". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 14/28 install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 15/28 3 Pin Definition The FG360 module applies LGA interface with 430 pins. 3.1 Pin Map Figure 3-1 Pin map Note The pin "RESERVED" means that the position pin is reserved and does not need to be connected. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 16/28 392391263260257254251248245242239236233230227224221218215212209206203200197Power PinsGND PinsGPIO PinsRESERVED/NC Pins390389PCIe PinsLCD Pins(U)SIM PinsUSB PinsI2C PinsBT&WIFI PinsADC PinsUART PinsSPI PinsANT PinsSDIO Pins299300301302303304305306307308309310311312313314315316317318319320321322323324325326327331332328329330333334335336340341337338339342343344345349350346347348351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388656871747780838689929598101104107110113116119122125128131646770737679828588919497100103106109112115118121124127130132264262259256253250247244241238235232229226223220217214211208205202199196193190187184181178175172166163160157154151148145142169139136133195194191188185182179176173167164161158155152149146143170140137134192189186183180177174171168165162159156153150147144141138135298297296295294293292291290289288287286285284283282281280279278277276275274273272271270269268267266265605754514845393630272421151296362595653504744413532292623171411388526158555249464340343128252216131037741632372342312282252222192162132102072042012582552522492462432401982619093969910210510811111411712012312669727578818487129661920SGMII Pins183342GRFC&RFFEI2S PinsCTL PinsCLOCK Pins430429428427426425424423422421420419418417416415414413412393394395396397398399400401402403404405406407408409410411 3.1.1 Table of Pin No. and Pin Name Table 3-1 Table of pin no. and pin name No. PIN Name No. PIN Name No. PIN Name No. PIN Name No. PIN Name 1 6 11 16 21 26 31 37 42 47 52 57 62 67 72 77 PWRKEY PON_1 CLK_OUT SYS_RESIN_N 5 SPI0_MISO SPI0_CSB SIM1_VDD SPI0_MOSI SPI0_CLK SIM1_DATA SIM2_RST SIM2_DATA 13 SIM1_CLK SIM1_DET SIM2_CLK SIM1_RST SGMII_1_TXN 18 SIM2_VDD GND SGMII_1_TXP SGMII_0_TXP 22 SGMII_1_RXN 23 RESERVED SGMII_0_TXN 25 SGMII_1_RXP PCIE_B_LN0_TXN 27 EINT17 GBE0_RST PCIE_B_LN0_TXP 30 PCIE_B_LN0_RXP GND 32 RESERVED PCIE_B_LN0_RXN 34 PCIE_A_CLKN 35~36 GND PCIE_A_CLKP 38 PCIE_D_LN0_TXP 39 PCIE_D_LN0_TXN 40 PCIE_A_LN0_TXN 41 PCIE_D_LN0_RXP GND PCIE_A_LN0_TXP 44 PCIE_D_LN0_RXN 45 SDC_CLK PCIE_A_LN0_RXN SDC_CMD RESERVED PCIE_A_LN0_RXP 50 GND SDC_DATA2 GND SDC_DATA1 SDC_DATA3 SSUSB_TXN SDC_DATA0 VBUS_DET SSUSB_TXP USB_DM USB_ID SSUSB_RXN USB_DP SSUSB_RXP AP_URTS1 GBE1_INT MDC PCIE_B_PEWAKEN 68 G3BE1_RST PCIE_B_CLKREQN 71 LSCE0B LSDA AP_URXD1 76 PCIE_B_PERSTN AP_UTXD1 LRSTB AP_UCTS1 81~83 GND MDIO LSDI LSA0 LSCK 2 7 12 17 43 48 53 58 63 73 78 10 15 20 46 51 56 61 66 4 9 14 19 24 29 55 60 65 70 75 80 94 3 8 28 33 49 54 59 64 69 74 79 93 98 84~89 VBAT_RF 90~92 GND PCM0_SYNC I2S0_MCK 95 PCM0_DI 96 PCM0_CLK 97 PCM0_DO CDC_RESET_N 99 PTA_TX 100 CDC_INT1_N 101 I2S0_BCK 102 PTA_RX 103 I2S0_DO 104 I2S0_DI 105 I2S0_LRCK 106 NET_STATUS 107 AUDIO_PWR_EN 108 STATUS 109 W_DISABLE 110 NET_MODE 111 SLEEP_IND 112 I2C_SCL0 113 WAKEUP_IN 114 ISINK1 115 I2C_SDA0 116 ANTCTL3 117 IRIG_B 118~119 GND 120 GPS_PPS 121 NC 122 GND 123 EINT20 124~125 GND 126 DBG_UART_RX 127~128 GND 129 DBG_UART_TX 130 ANT8_M 131~134 GND 135 BT_UTXD 136~137 GND 138 BT_URXD 139 ANT7_D 140 GND 141 DSI_TE 142~143 GND 144 EINT16 145~147 GND 148 ANT6 149 GND 150 BT_PRI_RXD 151~152 GND 153 BT_ACT_TXD 154~155 GND 156 DISP_PWM 157 ANT5_M2 158 GND 159 USB_DRVBUS 160~161 GND 162 163~164 GND GPIO78/
PCIE_D_CLKREQN Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 17/28 No. PIN Name No. PIN Name No. PIN Name No. PIN Name No. PIN Name 165 NC 166 NC 167 GND 168 NC 169~170 GND 171 NC 172~173 GND 174 NC 175 ANT3_M1 176 GND 177 NC 178~179 GND 180 LCD_PWR_EN2 181~182 GND 183 TDI 184 NC 185 GND 186 TCK 187~188 GND 189 TDO 190~192 GND 193 ANT1 194~197 GND 198 MIPI1_D_SDATA 199 ANT10_GNSS 200 GND 201 MIPI1_D_SCLK 202~203 GND 204 ANTCTL2 205 NC 206 GND 207 ANTCTL1 208 GND 209 210 ANTCTL0 GPIO76/
PCIE_D_PERSTN 211 SDIO_VDD 212 EINT15 213~215 GND 216 MIPI2_D_SDATA 217 RESERVED 218 GND 219 MIPI2_D_SCLK 220~222 GND 223 RESERVED 224 GND 225 VDD_EXT_1V8 226~228 GND 229 RESERVED 230 GND 231 NC 232~234 GND 235 RESERVED 236 GND 237 RESERVED 238~239 GND 240~241 RESERVED 242 GND 243 RESERVED 244~245 GND 246~247 RESERVED 248 GND 249 ADC0 250~251 GND 252 ADC1 253 RESERVED 254 GND 255 NC 256~258 GND 259 RESERVED 260 GND 261 VBAT_BB 262 GND 263~264 VBAT_BB 265 PCIE_D_CLKN 266 GND 267 SIM2_DET 268 SGMII_0_RXP 269 SGMII_0_RXN 270 SGMII_PWR_EN1 271 PCIE_B_CLKP 272 PCIE_B_CLKN 273 USB_BOOT 274 PCIE_A_PEWAKEN 275 PCIE_A_PERSTN 276 PCIE_A_CLKREQN 277 GND 278 GBE0_INT 279 EINT18 280 SDC_DET 281 SD_PWR_EN 282 BT_URTS 283 BT_UCTS 284 GND 285 286 WIFI_GPIO1 GPIO77/
PCIE_D_PEWAKEN 287 WLAN_ACT 288 LCM_RST 289 GND 290 NC 291 WIFI_GPIO2 292 NC 293 RESERVED 294 NC 295 TRST_N 296 TMS 297 SYSRSTB 298 LCD_PWR_EN1 299~392 GND 393 PCIE_C_LN0_RXN 394 PCIE_C_LN0_RXP 395 PCIE_C_LN0_TXP 396 PCIE_C_LN0_TXN 397~398 GND 399 PCIE_C_CLKP 400 PCIE_C_CLKN 401 PCIE_C_PERSTN 402 PCIE_C_CLKREQN 403 PCIE_C_PEWAKEN 404 DSI0_D0P 405 DSI0_D0N 406 DSI0_CKN 407 DSI0_CKP 408 DSI0_D1N 409 DSI0_D1P 410~425 NC 426 RESERVED 427 RESERVED 428 RESERVED 429 RESERVED 430 RESERVED Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 18/28 3.1.2 Pin Definition Table 3-2 IO Parameter definition Type PI PO DI DO DIO AI AO AIO OD PU PD Hi-Z Description Power Input Power Output Digital Input Digital Output Digital Input/Output Analog Input Analog Output Analog Input/Output Open Drain Internal pull up Internal pull down High impedance Table 3-3 LGA pin description Pin No. Type Power Domain Reset Value Pin Description Pin Name Power VBAT_BB VBAT_RF VDD_EXT_1V8 USB SSUSB_TXN SSUSB_TXP SSUSB_RXN SSUSB_RXP USB_DM USB_DP VBUS_DET USB_DRVBUS USB_ID USIM 55 58 61 63 59 62 57 159 60 261 263, 264 PI 84, 85, 86, 87, 88, 89 225 PI PO
AO AO AI AI AIO AIO DI DO DI
Baseband power input RF power input 1.8V power output USB super speed transmit data minus USB super speed transmit data plus USB super speed receive data minus USB super speed receive data plus USB high speed data minus USB high speed data plus USB VBUS detection USB OTG power enable USB ID
VDD_EXT_1V8 PD VDD_EXT_1V8 PD Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 19/28 Pin No. 7 10 13 16 14 Type Power Domain Reset Value Pin Description PO DIO DO DO DI
SIM1_VDD PD SIM1_VDD PD PD SIM1_VDD VDD_EXT_1V8 PD WAKEUP_IN DI VDD_EXT_1V8 PD NET_STATUS 106 DO VDD_EXT_1V8 PD Pin Name SIM1_VDD SIM1_DATA SIM1_CLK SIM1_RST SIM1_DET SIM2_VDD SIM2_DATA SIM2_CLK SIM2_RST SIM2_DET GPIO W_DISABLE NET_MODE SLEEP_IND STATUS IRIG_B GPS_PPS ISINK1 ANT ANT1 NC ANT3_M1 NC ANT5_M2 ANT6 ANT7_D ANT8_M NC ANT10_GNSS NC ANT Tuner Control 18 12 15 11 267 109 113 110 111 108 117 120 114 193 184 175 166 157 148 139 130 121 199 205 PO
DIO SIM2_VDD PD DO DO DI SIM2_VDD PD PD SIM2_VDD VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VBAT_BB HI-Z DO DO AI AIO AIO AIO AIO AIO AIO AIO AIO AIO AI AIO
SIM1 power supply,3V/1.8V SIM1 data input/output SIM1 clock signal SIM1 reset signal SIM1 detect signal SIM2 power supply,3V/1.8V, Reserved SIM2 data input/output, Reserved SIM2 clock signal, Reserved SIM2 reset signal, Reserved SIM2 detect, Reserved Module airplane mode control signal Module wake up input from host Module network status indication Module network mode indication Module output to wake up host Module current working status indication B code output PPS signal output LED negative drive signal UCB TRx NC 41 TRx + MHB/UCB/LAA Rx NC MHB/UCB/LAA Rx UCB TRx LMHB Rx LMH TRX NC GNSS antenna NC External Tuner MIPI Control Data Pin External Tuner MIPI Control Clock Pin External Tuner MIPI Control Data Pin MIPI1_D_SDATA 198 DIO VDD_EXT_1V8 PD MIPI1_D_SCLK 201 DO VDD_EXT_1V8 PD MIPI2_D_SDATA 216 DIO VDD_EXT_1V8 PD Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 20/28 Pin Name Pin No. Type Power Domain Reset Value Pin Description VBAT_BB Module power on signal EINT20 123 DI VDD_EXT_1V8 PD USB_BOOT 273 DI VDD_EXT_1V8 PD MIPI2_D_SCLK ANTCTL0 ANTCTL1 ANTCTL2 ANTCTL3 Module Control PWRKEY SYS_RESIN_N PON_1 SD SDC_CMD SDC_DATA1 SDC_DATA0 SDC_CLK SDC_DATA2 SDC_DATA3 SDC_DET SD_PWR_EN SDIO_VDD SGMII SGMII_1_RXN SGMII_1_RXP SGMII_1_TXN SGMII_1_TXP GBE1_INT GBE1_RST 219 210 207 204 116 1 4 2 47 53 56 45 51 54 280 281 211 22 25 17 20 65 68 24 21 SGMII_0_RXN 269 SGMII_0_RXP 268 SGMII_0_TXN SGMII_0_TXP DO VDD_EXT_1V8 PD 1.8V 1.8V 1.8V 1.8V 1.8V 1.8V DO DO DO DO DI DI DI PD PD PD PD PU PU PU DIO SDIO_VDD PD PO
DIO DIO DO DIO DIO DI DO AIO AIO AIO AIO DI DO AIO AIO AIO AIO PD SDIO_VDD PD SDIO_VDD PD SDIO_VDD PD SDIO_VDD PD SDIO_VDD VDD_EXT_1V8 PD VDD_EXT_1V8 PD
AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I VDD_EXT_1V8 PD VDD_EXT_1V8 PD AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I
External Tuner MIPI Control Clock Pin Antenna control signal 0 Antenna control signal 1 Antenna control signal 2 Antenna control signal 3 Module power-key control signal Module reset control signal MT6890 interruput input signal, used for WPS key input signal Force into USB download boot mode SDC interface command signal SDC interface DATA1 signal SDC interface DATA0 signal SDC interface clock signal SDC interface DATA2 signal SDC interface DATA3 signal SD card insert detection SD card power supply enable SDC interface I/O power domain SGMII 1 receive data minus SGMII 1 receive data plus SGMII 1 transmit data minus SGMII 1 transmit data plus SGMII 1 interrupt input signal SGMII 1 reset signal SGMII 0 receive data minus SGMII 0 receive data plus SGMII 0 transmit data minus SGMII 0 transmit data plus Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 21/28 Pin Name GBE0_INT GBE0_RST SGMII_PWR_EN1 MDIO MDC PCIE 34 PCIE_A_CLKN 37 PCIE_A_CLKP 40 PCIE_A_LN0_TXN PCIE_A_LN0_TXP 43 PCIE_A_LN0_RXN 46 PCIE_A_LN0_RXP 49 PCIE_A_PEWAKEN 274 275 PCIE_A_PERSTN PCIE_A_CLKREQN 276 272 PCIE_B_CLKN 271 PCIE_B_CLKP 26 PCIE_B_LN0_TXN PCIE_B_LN0_TXP 29 PCIE_B_LN0_RXN 33 PCIE_B_LN0_RXP 30 PCIE_B_PEWAKEN 67 PCIE_B_PERSTN 76 PCIE_B_CLKREQN 70 400 PCIE_C_CLKN PCIE_C_CLKP 399 PCIE_C_LN0_TXN 396 395 PCIE_C_LN0_TXP PCIE_C_LN0_RXN 393 PCIE_C_LN0_RXP 394 PCIE_C_PEWAKEN 403 401 PCIE_C_PERSTN PCIE_C_CLKREQN 402 PCIE_D_LN0_TXN 39 38 PCIE_D_LN0_TXP PCIE_D_LN0_RXN 44 PCIE_D_LN0_RXP 41 GPIO76/
PCIE_D_PERSTN GPIO77/
PCIE_D_PEWAKEN 285 Pin No. 278 28 270 69 66 Type Power Domain Reset Value Pin Description DI DO DO DIO DO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD SGMII 0 interrupt input signal SGMII 0 reset signal SGMII power supply enable 1 SGMII MDIO signal SGMII MDC signal AIO AIO AIO AIO AIO AIO DI DO DIO AIO AIO AIO AIO AIO AIO DI DO DIO AIO AIO AIO AIO AIO AIO DI DO DIO
AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE VDD_EXT_1V8 PU VDD_EXT_1V8 PU VDD_EXT_1V8 PU AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE VDD_EXT_1V8 PU VDD_EXT_1V8 PU VDD_EXT_1V8 PU AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE VDD_EXT_1V8 PU VDD_EXT_1V8 PU VDD_EXT_1V8 PU
AIO AIO AIO AIO AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE
PCIe A reference clock minus PCIe A reference clock plus PCIe A Tx0 minus PCIe A Tx0 plus PCIe A Rx0 minus PCIe A Rx0 plus PCIe A wake-up signal PCIe A reset signal PCIe A clock request signal PCIe B reference clock minus PCIe B reference clock plus PCIe B Tx0 minus PCIe B Tx0 plus PCIe B Rx0 minus PCIe B Rx0 plus PCIe B wake-up signal PCIe B reset signal PCIe B clock request signal PCIe C reference clock minus PCIe C reference clock plus PCIe C Tx0 minus PCIe CTx0 plus PCIe C Rx0 minus PCIe C Rx0 plus PCIe C wake-up signal PCIe C reset signal PCIe C clock request signal PCIe D reference clock minus, Reserved PCIe D reference clock plus, Reserved PCIe D Tx0 minus, Reserved PCIe D Tx0 plus, Reserved PCIe D Rx0 minus, Reserved PCIe D Rx0 plus, Reserved MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT and RF co-exist control signals MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT 209 DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 22/28 PCIE_D_CLKN 3 AIO AVDD12_PCIE
PCIE_D_CLKP 265 AIO AVDD12_PCIE Pin Name Pin No. Type Power Domain Reset Value Pin Description GPIO78/
PCIE_D_CLKREQN 162 DO VDD_EXT_1V8 PD and RF co-exist control signals MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT and RF co-exist control signals JTAG TDI TCK TDO TRST_N TMS SYSRSTB I2C I2C_SDA0 I2C_SCL0 I2S I2S0_DO I2S0_MCK I2S0_DI I2S0_BCK I2S0_LRCK ADC ADC0 ADC1 Debug UART DBG_UART_TX DBG_UART_RX UART AP_UCTS1 AP_URTS1 AP_UTXD1 AP_URXD1 SPI SPI0_MISO SPI0_MOSI SPI0_CSB SPI0_CLK AUDIO CODEC CDC_RESET_N CDC_INT1_N 183 186 189 295 296 297 115 112 103 94 104 101 105 249 252 129 126 79 64 77 73 5 8 6 9 98 100 DI DI DI DI DI DO DO DI DO DO AI AI DI DO DO DI DI DO VDD_EXT_1V8 PD JTAG TDIReserved VDD_EXT_1V8 PD JTAG TCKReserved DO VDD_EXT_1V8 PD JTAG TDOReserved VDD_EXT_1V8 PD JTAG TRSTReserved VDD_EXT_1V8 PD JTAG TMSReserved VDD_EXT_1V8 PD System resetReserved DIO DO VDD_EXT_1V8 PU VDD_EXT_1V8 PU I2C data I2C clock VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD I2S data output signal I2S clock output signal I2S data input signal I2S data bit clock signal I2S frame clock signal VDD_EXT_1V8 -
VDD_EXT_1V8 -
A/D conversion channel 0 A/D conversion channel 1 DO VDD_EXT_1V8 PU DI VDD_EXT_1V8 PU VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD Debug UART data transmission Debug UART data reception UART receive ready signal UART transmit request signal UART transmit signal UART receive signal SPI interface input signal SPI interface output signal SPI interface chip select signal SPI interface clock signal External CODEC reset signal External CODEC interrupt signal Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 23/28 Pin Name Pin No. Type Power Domain Reset Value Pin Description AUDIO_PWR_EN 107 DO VDD_EXT_1V8 PD LCD LSCK 80 DO VDD_EXT_1V8 PD External CODEC power enable CLK signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD CLK signal Data signal for DBI-C serial 3/4 wire SPI LCD. For type interface I LCD, is data input/output signal. For type interface II LCD, is data output signal from FG360 module and connect to LCD data in signal RS signal for DBI-C serial 4 wire SPI LCD, DBI-C serial 3 wire SPI LCD not has this signal CS signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD CS signal Data signal for DBI-C serial 3/4 wire SPI LCD. For type interface II LCD, is data input signal from FG360 module and connect to LCD data output signal. For type interface I LCD, not has this signal Reset signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD RST signal LCD frame synchronization signal LCD Backlight control PWM signal DSI LCD reset signal LCD power supply enable 1 LCD power supply enable 2 DSI LCD MIPI CLK minus DSI LCD MIPI CLK plus DSI LCD MIPI lane0 minus DSI LCD MIPI lane0 plus DSI LCD MIPI lane1 minus DSI LCD MIPI lane1 plus LSDA 72 DO/DI VDD_EXT_1V8 PD LSA0 DO VDD_EXT_1V8 PD LSCE0B DO VDD_EXT_1V8 PD LSDI 74 DI VDD_EXT_1V8 PD 75 71 78 141 156 288 298 180 406 407 405 404 408 409 135 138 LRSTB DSI_TE DISP_PWM LCM_RST LCD_PWR_EN1 LCD_PWR_EN2 DSI0_CKN DSI0_CKP DSI0_D0N DSI0_D0P DSI0_D1N DSI0_D1P WIFI/BT BT_UTXD BT_URXD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO DO DO AIO AIO AIO AIO AIO AIO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD AVDD12_DSI AVDD12_DSI AVDD12_DSI AVDD12_DSI AVDD12_DSI AVDD12_DSI
DO DI VDD_EXT_1V8 PD VDD_EXT_1V8 PD UART TX signal UART RX signal Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 24/28 UART RTS signal UART CTS signal PCM data output PCM data input PCM clock output PCM synchronization signal MT6890 GPIO, used for control WIFI RESET signal or WIFI Power enable signal MT6890 GPIO, used for control WIFI RESET signal or WIFI Power enable signal MT6890 GPIO, used for control WIFI RESET signal or WIFI Power enable signal Interrupt input signal, used as WLAN_EN WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI control signal 1, Reserved WIFI control signal 2, Reserved Pin Name BT_URTS BT_UCTS PCM0_DO PCM0_DI PCM0_CLK PCM0_SYNC Pin No. 282 283 97 95 96 93 Type Power Domain Reset Value Pin Description DO DI DO DI DO DO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD EINT16 144 DO VDD_EXT_1V8 PD EINT17 27 DO VDD_EXT_1V8 PD EINT18 EINT15 DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD BT_PRI_RXD 150 DI VDD_EXT_1V8 PD BT_ACT_TXD 153 DO VDD_EXT_1V8 PD WLAN_ACT DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DIO VDD_EXT_1V8 PD DIO VDD_EXT_1V8 PD 279 212 287 99 102 286 291 237 223 217 240 235 229 243 247 241 246 259 253 PTA_TX PTA_RX WIFI_GPIO1 WIFI_GPIO2 MMW NC NC NC NC NC NC NC NC NC NC NC NC Reserved RESERVED NC
23, 32, 48, 293,426~430
Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 25/28 Pin Name Type Power Domain Reset Value Pin Description NC
Pin No. 165,168,171, 174,177,231, 255,290,292, 294,410~425 Pin Name Pin No. GND GND Note 19, 31, 35, 36, 42, 50, 52, 81, 82, 83, 90, 91, 92, 118, 119, 122, 124, 125, 127, 128, 131, 132, 133, 134, 136, 137, 140, 142, 143, 145, 146, 147, 149, 151, 152, 154, 155, 158, 160, 161, 163, 164, 167, 169, 170, 172, 173, 176, 178, 179, 181, 182, 185, 187, 188, 190, 191, 192, 194, 195, 196, 197, 200, 202, 203, 206, 208, 213, 214, 215, 218, 220, 221, 222, 224, 226, 227, 228, 230, 232, 233, 234, 236, 238, 239, 242, 244, 245, 248, 250, 251, 254, 256, 257, 258, 260, 262, 266, 277, 284, 289, 299, 300, 301, 302, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370, 371, 372, 373, 374, 375, 376, 377, 378, 379, 380, 381, 382, 383, 384, 385, 386, 387, 388, 389, 390, 391, 392, 397,398 1. The PWRKEY and SYS_RESIN_N pins have internal pull-up, and the pull-up power supply is in exclusive mode; no external pull-up is required; PON_1 pin module with weak pull-down, maximum input voltage must not exceed VBAT_BB. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 26/28 4 Structural Specification 4.1 Product Appearance The appearance of the FG360 module product is as shown:
Figure 4-1 Module product appearance 4.2 Dimension of Structure The structural dimensions of the FG360 module are shown in the figure:
Figure 4-2 Structure size chart Note Unmarked dimensional tolerances are 0.1mm. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 27/28 Refer to FIBOCOM FG360-NA Series SMT Design Guide. 4.3 Storage 4.4 Packing Refer to FIBOCOM FG360-NA Series SMT Design Guide. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 28/28