FG360-NA Hardware Guide Version: Draft V1.0.0 Date: 2022-9-28 Applicability Type NO. Product Model Description Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 2/24 Copyright Copyright 2021 Fibocom Wireless Inc. All rights reserved. Without the prior written permission of the copyright holder, any company or individual is prohibited to excerpt, copy any part of or the entire document, or distribute the document in any form. Notice The document is subject to update from time to time owing to the product version upgrade or other reasons. Unless otherwise specified, the document only serves as the user guide. All the statements, information and suggestions contained in the document do not constitute any explicit or implicit guarantee. Trademark The trademark is registered and owned by Fibocom Wireless Inc. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 3/24 Change History Version Author Update Date Remark V1.0.0 2022-0-28 Initial version Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 4/24 Contents 1 Foreword ........................................................................................................................ 6 1.1 Introduction ..................................................................................................................... 6 2 Overview ........................................................................................................................ 6 2.1 Introduction ..................................................................................................................... 6 2.1.1 Key Features ................................................................................................................. 6 2.2 2.3 2.4 Application Framework ................................................................................................... 8 Antenna Configuration .................................................................................................... 9 Waring ............................................................................................................................ 9 2.4.1 Important Notice to OEM integrators ............................................................................. 9 2.4.2 FCC Statement ............................................................................................................ 10 3 Pin Definition ............................................................................................................... 12 3.1 Pin Map ........................................................................................................................ 12 3.1.1 Table of Pin No. and Pin Name .................................................................................... 13 3.1.2 Pin Definition ................................................................................................................ 15 4 Structural Specification .............................................................................................. 23 4.1 4.2 4.3 4.4 Product Appearance ..................................................................................................... 23 Dimension of Structure ................................................................................................. 23 Storage ......................................................................................................................... 24 Packing ......................................................................................................................... 24 Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 5/24 1 Foreword 1.1 Introduction The document describes the electrical characteristics, RF performance, dimensions and application environment, etc. of FG360-NA (hereinafter referred to as FG360). With the assistance of the document and other instructions, the developers can quickly understand the hardware functions of FG360 modules and develop products. 2 Overview 2.1 Introduction The FG360 series module is a 5G module which supports NSA and SA network architectures. The FG360 integrates core devices such as Baseband, Memory, PMU, Transceiver, and PA. It supports 5G NR Sub6, FDD-LTE, and TDD-LTE long-distance communication modes. Supports uplink 22 MIMO and downlink 44 MIMO multi-antenna configuration in SA mode. It also supports GNSS wireless positioning technology. The FG360 is designed in an LGA package and is suitable for a variety of eMBB scenarios, such as CPE, VR/AR, gateway, TV box, and intelligent monitoring. 2.1.1 Key Features Table 2-1 Key features Performance Description LTE FDD: B2, B4, B5, B12, B25, B48, B66, B71 Operating Band LTE TDD: B41, B48 NR: n25, n41, n48, n66, n71, n77 GNSS Support GPS, GLONASS, Galileo, BDS, QZSS NR LTE Feature 3GPP Release 15 3GPP Release 15 NR:
DL 44 MIMO: n25, n41, n48, n66, n71, n77 UL 22MIMO: n41, n77 LTE:
DL 44MIMO: B2, B4, B25, B41, B48, B66, B71 Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 6/24 NSA and SA supported SRS: n41, n77 Support: 1T2R, 1T4R, 2T4R HPUE: B41, n41, n77 SA 5G/NR Sub-6 Peak DL 4.43Gbps/UL 1.25Gbps Data Transmission NSA Peak DL 3.74Gbps/UL 700Mbps LTE DL 1.6Gbps (CAT19)/UL 211Mbps (CAT18) Power Supply DC: 3.3~4.4V, typical voltage: 3.8V Normal operating temperature: -30~751 Temperature Extended operating temperature: -40~852 Physical characteristics Storage temperature: -40~85 Dimension: 41 mm44mm2.75 mm Package: 430 pin LGA Weight: about 12.0 g CPU ARM Cortex-A55, quad core, up to 2.0 GHz Memory 2GB LPDDR4x+32GB eMMC Flash Interface USB Interface PCIe Interface SIM Interface I2C ADCs Software USB2.0 high speed (HS) interface, data transmission rate up to 480Mbps USB3.0 Super-speed (SS) interface, data transmission rate up to 5Gbps PCIe Gen3 2Lane1, PCIe Gen3 1Lane2 (PCIe only support RC mode) Dual SIM: 1.8V/3V SIM1: USIM SIM2: ESIM/USIM One set of I2C interface, data transmission rate up to 400Kbit/s A/D conversion channel, Voltage Range: 0~1.45V Firmware update USB/PCIe/FOTA Operating System Linux/Android/Windows Note 1. When temperature keeps in the range of -30~75C, the module can work normally. Module performance meets the 3GPP specifications. 2. When temperature keeps in the range of -40~85C, module performance may be slightly out of 3GPP specifications. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 7/24 2.2 Application Framework The application framework below shows the main hardware functions of the FG360 module:
Baseband RF transceiver PMU Memory Peripheral interface Figure 2-1 Hardware block diagram Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 8/24 Main PMUETTRX BlocksTransceiverDRFRFFERFFERXTXBasebandeMCPeMMCLPDDR4XBBCLK26MHzRFCLK26MHzSleep CLK32KHzSPMIANT0ANT1ANT2ANT3ANT4ANT5GNSSPWRKEYRESET_NVBATJTAGUSIM1SDIOPCIe3.0Coex UARTI2SSGMIIGPIO/EINTUSB2.0/3.0UARTeSIMI2CSPIADCsMIPIDSI26MHzCrystalSub PMU 130 175 2.3 Antenna Configuration FG360 module supports seven antennas and the configuration is as below table:
PAD Function Band Configuration(TX) Band Description LB TRX MHB sec TRX B2/4/5/12/25/41/48/66/71 n25/41/48/66/71/77 Configuration(RX) B2/4/5/12/25/41/48/66/71 n25/41/48/66/71/77 Frequency Range(MHz) 617~4200 MHB TRX LB RX B2/4/25/41/48/66 B2/4/25/41/48/66/71 n25/41/48/66/77 n25/41/48/66/71/77 617~4200 157 LMHB Rx Only SRS B2/4/25/66/71 617~2200 n25/66/71 139 LMHB Rx Only SRS B2/4/5/12/66/71 617~2200 148 HUB Rx Only SRS 193 HUB Rx Only SRS 199 GNSS 2.4 Waring n25/66/71 B41/48 n41/48/77 B41/48 n41/48/77 GNSS receive 2496~4200 2496~4200 2.4.1 Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify compliance as a composite system. When testing the host device for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band emissions). The host manufacturer must verify that there are no additional unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s). The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if needed. Important Note Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 9/24 notice that any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify to Fibocom Wireless Inc. that they wish to change the antenna trace design. In this case, a Class II permissive change application is required to be filed by the USI, or the host manufacturer can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application. End Product Labeling When the module is installed in the host device, the FCC/IC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: Contains FCC ID: ZMOFG360NA08 The FCC ID can be used only when all FCC mpliance requirements are met. Antenna Installation
(1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
(2) The transmitter module may not be co-located with any other transmitter or antenna.
(3) Only antennas of the same type and with equal or less gains as shown below may be used with this module. Other types of antennas and/or higher gain antennas may require additional authorization for operation.
(4)The max allowed antenna gain is 3.76dBi for external monopole antenna. In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. 2.4.2 FCC Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 10/24
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator &
your body. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 11/24 3 Pin Definition The FG360 module applies LGA interface with 430 pins. 3.1 Pin Map Figure 3-1 Pin map Note The pin "RESERVED" means that the position pin is reserved and does not need to be connected. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 12/24 392391263260257254251248245242239236233230227224221218215212209206203200197Power PinsGND PinsGPIO PinsRESERVED/NC Pins390389PCIe PinsLCD Pins(U)SIM PinsUSB PinsI2C PinsBT&WIFI PinsADC PinsUART PinsSPI PinsANT PinsSDIO Pins299300301302303304305306307308309310311312313314315316317318319320321322323324325326327331332328329330333334335336340341337338339342343344345349350346347348351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388656871747780838689929598101104107110113116119122125128131646770737679828588919497100103106109112115118121124127130132264262259256253250247244241238235232229226223220217214211208205202199196193190187184181178175172166163160157154151148145142169139136133195194191188185182179176173167164161158155152149146143170140137134192189186183180177174171168165162159156153150147144141138135298297296295294293292291290289288287286285284283282281280279278277276275274273272271270269268267266265605754514845393630272421151296362595653504744413532292623171411388526158555249464340343128252216131037741632372342312282252222192162132102072042012582552522492462432401982619093969910210510811111411712012312669727578818487129661920SGMII Pins183342GRFC&RFFEI2S PinsCTL PinsCLOCK Pins430429428427426425424423422421420419418417416415414413412393394395396397398399400401402403404405406407408409410411 3.1.1 Table of Pin No. and Pin Name Table 3-1 Table of pin no. and pin name No. PIN Name No. PIN Name No. PIN Name No. PIN Name No. PIN Name 1 6 11 16 21 26 31 37 42 47 52 57 62 67 72 77 PWRKEY SPI0_CSB SIM2_RST SIM1_RST 2 7 12 17 PON_1 SIM1_VDD 3 8 CLK_OUT SPI0_MOSI SIM2_DATA 13 SIM1_CLK SGMII_1_TXN 18 SIM2_VDD SGMII_0_TXP 22 SGMII_1_RXN 23 RESERVED PCIE_B_LN0_TXN 27 EINT17 GND 32 RESERVED 28 33 GBE0_RST 4 9 14 19 24 29 SYS_RESIN_N 5 SPI0_MISO SPI0_CLK SIM1_DET GND 10 15 20 SIM1_DATA SIM2_CLK SGMII_1_TXP SGMII_0_TXN 25 SGMII_1_RXP PCIE_B_LN0_TXP 30 PCIE_B_LN0_RXP PCIE_B_LN0_RXN 34 PCIE_A_CLKN 35~36 GND PCIE_A_CLKP 38 PCIE_D_LN0_TXP 39 PCIE_D_LN0_TXN 40 PCIE_A_LN0_TXN 41 PCIE_D_LN0_RXP GND SDC_CMD GND VBUS_DET USB_DP 43 48 53 58 63 RESERVED SDC_DATA1 SSUSB_TXP SSUSB_RXP PCIE_B_PEWAKEN 68 G3BE1_RST LSDA AP_UTXD1 73 78 AP_URXD1 LRSTB PCIE_A_LN0_TXP 44 PCIE_D_LN0_RXN 45 SDC_CLK PCIE_A_LN0_RXP 50 GND 49 54 59 64 69 74 79 93 98 SDC_DATA3 USB_DM AP_URTS1 MDIO LSDI AP_UCTS1 PCM0_SYNC 55 60 65 70 75 80 94 46 51 56 61 66 PCIE_A_LN0_RXN SDC_DATA2 SDC_DATA0 SSUSB_RXN MDC SSUSB_TXN USB_ID GBE1_INT PCIE_B_CLKREQN 71 LSCE0B LSA0 LSCK 76 PCIE_B_PERSTN 81~83 GND I2S0_MCK 95 PCM0_DI 84~89 VBAT_RF 90~92 GND 96 PCM0_CLK 97 PCM0_DO CDC_RESET_N 99 PTA_TX 100 CDC_INT1_N 101 I2S0_BCK 102 PTA_RX 103 I2S0_DO 104 I2S0_DI 105 I2S0_LRCK 106 NET_STATUS 107 AUDIO_PWR_EN 108 STATUS 109 W_DISABLE 110 NET_MODE 111 SLEEP_IND 112 I2C_SCL0 113 WAKEUP_IN 114 ISINK1 115 I2C_SDA0 116 ANTCTL3 117 IRIG_B 118~119 GND 120 GPS_PPS 121 NC 122 GND 123 EINT20 124~125 GND 126 DBG_UART_RX 127~128 GND 129 DBG_UART_TX 130 ANT8_M 131~134 GND 135 BT_UTXD 136~137 GND 138 BT_URXD 139 ANT7_D 140 GND 141 DSI_TE 142~143 GND 144 EINT16 145~147 GND 148 ANT6 149 GND 150 BT_PRI_RXD 151~152 GND 153 BT_ACT_TXD 154~155 GND 156 DISP_PWM 157 ANT5_M2 158 GND 159 USB_DRVBUS 160~161 GND 162 163~164 GND PCIE_D_CLKREQN GPIO78/
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 13/24 No. PIN Name No. PIN Name No. PIN Name No. PIN Name No. PIN Name 165 NC 166 NC 167 GND 168 NC 169~170 GND 171 NC 172~173 GND 174 NC 175 ANT3_M1 176 GND 177 NC 178~179 GND 180 LCD_PWR_EN2 181~182 GND 183 TDI 184 NC 185 GND 186 TCK 187~188 GND 189 TDO 190~192 GND 193 ANT1 194~197 GND 198 MIPI1_D_SDATA 199 ANT10_GNSS 200 GND 201 MIPI1_D_SCLK 202~203 GND 204 ANTCTL2 205 NC 206 GND 207 ANTCTL1 208 GND 209 210 ANTCTL0 PCIE_D_PERSTN GPIO76/
211 SDIO_VDD 212 EINT15 213~215 GND 216 MIPI2_D_SDATA 217 RESERVED 218 GND 219 MIPI2_D_SCLK 220~222 GND 223 RESERVED 224 GND 225 VDD_EXT_1V8 226~228 GND 229 RESERVED 230 GND 231 NC 232~234 GND 235 RESERVED 236 GND 237 RESERVED 238~239 GND 240~241 RESERVED 242 GND 243 RESERVED 244~245 GND 246~247 RESERVED 248 GND 249 ADC0 250~251 GND 252 ADC1 253 RESERVED 254 GND 255 NC 256~258 GND 259 RESERVED 260 GND 261 VBAT_BB 262 GND 263~264 VBAT_BB 265 PCIE_D_CLKN 266 GND 267 SIM2_DET 268 SGMII_0_RXP 269 SGMII_0_RXN 270 SGMII_PWR_EN1 271 PCIE_B_CLKP 272 PCIE_B_CLKN 273 USB_BOOT 274 PCIE_A_PEWAKEN 275 PCIE_A_PERSTN 276 PCIE_A_CLKREQN 277 GND 278 GBE0_INT 279 EINT18 280 SDC_DET 281 SD_PWR_EN 282 BT_URTS 283 BT_UCTS 284 GND 285 286 WIFI_GPIO1 PCIE_D_PEWAKEN GPIO77/
287 WLAN_ACT 288 LCM_RST 289 GND 290 NC 291 WIFI_GPIO2 292 NC 293 RESERVED 294 NC 295 TRST_N 296 TMS 297 SYSRSTB 298 LCD_PWR_EN1 299~392 GND 393 PCIE_C_LN0_RXN 394 PCIE_C_LN0_RXP 395 PCIE_C_LN0_TXP 396 PCIE_C_LN0_TXN 397~398 GND 399 PCIE_C_CLKP 400 PCIE_C_CLKN 401 PCIE_C_PERSTN 402 PCIE_C_CLKREQN 403 PCIE_C_PEWAKEN 404 DSI0_D0P 405 DSI0_D0N 406 DSI0_CKN 407 DSI0_CKP 408 DSI0_D1N 409 DSI0_D1P 410~425 NC 426 RESERVED 427 RESERVED 428 RESERVED 429 RESERVED 430 RESERVED Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 14/24 3.1.2 Pin Definition Table 3-2 IO Parameter definition Type PI PO DI DO DIO AI AO AIO OD PU PD Hi-Z Table 3-3 LGA pin description Description Power Input Power Output Digital Input Digital Output Digital Input/Output Analog Input Analog Output Analog Input/Output Open Drain Internal pull up Internal pull down High impedance Pin Name Power VBAT_BB VBAT_RF VDD_EXT_1V8 USB SSUSB_TXN SSUSB_TXP SSUSB_RXN SSUSB_RXP USB_DM USB_DP VBUS_DET USB_DRVBUS USB_ID USIM Pin No. Type Power Domain Reset Value Pin Description 261 263, 264 PI 84, 85, 86, 87, 88, 89 225 PI PO 55 58 61 63 59 62 57 159 60 AO AO AI AI AIO AIO DI DO DI
VDD_EXT_1V8 PD VDD_EXT_1V8 PD Baseband power input RF power input 1.8V power output USB super speed transmit data minus USB super speed transmit data plus USB super speed receive data minus USB super speed receive data plus USB high speed data minus USB high speed data plus USB VBUS detection USB OTG power enable USB ID Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 15/24 Type Power Domain Reset Value Pin Description PO DIO DO DO DI
SIM1_VDD PD SIM1_VDD PD PD SIM1_VDD VDD_EXT_1V8 PD Pin Name SIM1_VDD SIM1_DATA SIM1_CLK SIM1_RST SIM1_DET SIM2_VDD SIM2_DATA SIM2_CLK SIM2_RST SIM2_DET GPIO W_DISABLE WAKEUP_IN Pin No. 7 10 13 16 14 18 12 15 11 267 109 113 PO
DIO SIM2_VDD PD DO DO DI SIM2_VDD PD PD SIM2_VDD VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD NET_STATUS 106 DO VDD_EXT_1V8 PD NET_MODE SLEEP_IND STATUS IRIG_B GPS_PPS ISINK1 ANT ANT1 NC ANT3_M1 NC ANT5_M2 ANT6 ANT7_D ANT8_M NC ANT10_GNSS NC ANT Tuner Control 110 111 108 117 120 114 193 184 175 166 157 148 139 130 121 199 205 DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO DO AI AIO AIO AIO AIO AIO AIO AIO AIO AIO AI AIO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VBAT_BB HI-Z
MIPI1_D_SDATA 198 DIO VDD_EXT_1V8 PD MIPI1_D_SCLK 201 DO VDD_EXT_1V8 PD MIPI2_D_SDATA 216 DIO VDD_EXT_1V8 PD SIM1 power supply,3V/1.8V SIM1 data input/output SIM1 clock signal SIM1 reset signal SIM1 detect signal SIM2 power supply,3V/1.8V, Reserved SIM2 data input/output, Reserved SIM2 clock signal, Reserved SIM2 reset signal, Reserved SIM2 detect, Reserved Module airplane mode control signal Module wake up input from host Module network status indication Module network mode indication Module output to wake up host Module current working status indication B code output PPS signal output LED negative drive signal UCB TRx NC 41 TRx + MHB/UCB/LAA Rx NC MHB/UCB/LAA Rx UCB TRx LMHB Rx LMH TRX NC GNSS antenna NC External Tuner MIPI Control Data Pin External Tuner MIPI Control Clock Pin External Tuner MIPI Control Data Pin Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 16/24 Pin Name Pin No. Type Power Domain Reset Value Pin Description MIPI2_D_SCLK ANTCTL0 ANTCTL1 ANTCTL2 ANTCTL3 Module Control PWRKEY SYS_RESIN_N PON_1 219 210 207 204 116 1 4 2 DO VDD_EXT_1V8 PD DO DO DO DO DI DI DI 1.8V 1.8V 1.8V 1.8V 1.8V 1.8V VBAT_BB PD PD PD PD PU PU PU EINT20 123 DI VDD_EXT_1V8 PD USB_BOOT 273 DI VDD_EXT_1V8 PD SD SDC_CMD SDC_DATA1 SDC_DATA0 SDC_CLK SDC_DATA2 SDC_DATA3 SDC_DET SD_PWR_EN SDIO_VDD SGMII SGMII_1_RXN SGMII_1_RXP SGMII_1_TXN SGMII_1_TXP GBE1_INT GBE1_RST 47 53 56 45 51 54 280 281 211 22 25 17 20 65 68 SGMII_0_RXN 269 SGMII_0_RXP 268 SGMII_0_TXN SGMII_0_TXP 24 21 DIO SDIO_VDD PD DIO DIO DO DIO DIO DI DO PD SDIO_VDD PD SDIO_VDD PD SDIO_VDD PD SDIO_VDD PD SDIO_VDD VDD_EXT_1V8 PD VDD_EXT_1V8 PD PO
AIO AIO AIO AIO DI DO AIO AIO AIO AIO
AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I VDD_EXT_1V8 PD VDD_EXT_1V8 PD AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I AVDD12_SGMI I
External Tuner MIPI Control Clock Pin Antenna control signal 0 Antenna control signal 1 Antenna control signal 2 Antenna control signal 3 Module power-key control signal Module reset control signal Module power on signal MT6890 interruput input signal, used for WPS key input signal Force into USB download boot mode SDC interface command signal SDC interface DATA1 signal SDC interface DATA0 signal SDC interface clock signal SDC interface DATA2 signal SDC interface DATA3 signal SD card insert detection SD card power supply enable SDC interface I/O power domain SGMII 1 receive data minus SGMII 1 receive data plus SGMII 1 transmit data minus SGMII 1 transmit data plus SGMII 1 interrupt input signal SGMII 1 reset signal SGMII 0 receive data minus SGMII 0 receive data plus SGMII 0 transmit data minus SGMII 0 transmit data plus Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 17/24 Type Power Domain Reset Value Pin Description DI DO DO DIO DO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD SGMII 0 interrupt input signal SGMII 0 reset signal SGMII power supply enable 1 SGMII MDIO signal SGMII MDC signal Pin No. 278 28 270 69 66 Pin Name GBE0_INT GBE0_RST SGMII_PWR_EN1 MDIO MDC PCIE 34 PCIE_A_CLKN 37 PCIE_A_CLKP 40 PCIE_A_LN0_TXN PCIE_A_LN0_TXP 43 PCIE_A_LN0_RXN 46 PCIE_A_LN0_RXP 49 PCIE_A_PEWAKEN 274 275 PCIE_A_PERSTN PCIE_A_CLKREQN 276 272 PCIE_B_CLKN 271 PCIE_B_CLKP 26 PCIE_B_LN0_TXN PCIE_B_LN0_TXP 29 PCIE_B_LN0_RXN 33 PCIE_B_LN0_RXP 30 PCIE_B_PEWAKEN 67 PCIE_B_PERSTN 76 PCIE_B_CLKREQN 70 400 PCIE_C_CLKN PCIE_C_CLKP 399 PCIE_C_LN0_TXN 396 395 PCIE_C_LN0_TXP PCIE_C_LN0_RXN 393 PCIE_C_LN0_RXP 394 PCIE_C_PEWAKEN 403 401 PCIE_C_PERSTN PCIE_C_CLKREQN 402 AIO AIO AIO AIO AIO AIO DI DO DIO AIO AIO AIO AIO AIO AIO DI DO DIO AIO AIO AIO AIO AIO AIO DI DO DIO
AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE VDD_EXT_1V8 PU VDD_EXT_1V8 PU VDD_EXT_1V8 PU AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE VDD_EXT_1V8 PU VDD_EXT_1V8 PU VDD_EXT_1V8 PU AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE VDD_EXT_1V8 PU VDD_EXT_1V8 PU VDD_EXT_1V8 PU
PCIE_D_CLKN 3 AIO AVDD12_PCIE
PCIE_D_CLKP 265 AIO AVDD12_PCIE PCIE_D_LN0_TXN 39 38 PCIE_D_LN0_TXP PCIE_D_LN0_RXN 44 PCIE_D_LN0_RXP 41 AIO AIO AIO AIO AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE AVDD12_PCIE
GPIO76/
PCIE_D_PERSTN 209 DI VDD_EXT_1V8 PD GPIO77/
PCIE_D_PEWAKEN 285 DO VDD_EXT_1V8 PD PCIe A reference clock minus PCIe A reference clock plus PCIe A Tx0 minus PCIe A Tx0 plus PCIe A Rx0 minus PCIe A Rx0 plus PCIe A wake-up signal PCIe A reset signal PCIe A clock request signal PCIe B reference clock minus PCIe B reference clock plus PCIe B Tx0 minus PCIe B Tx0 plus PCIe B Rx0 minus PCIe B Rx0 plus PCIe B wake-up signal PCIe B reset signal PCIe B clock request signal PCIe C reference clock minus PCIe C reference clock plus PCIe C Tx0 minus PCIe CTx0 plus PCIe C Rx0 minus PCIe C Rx0 plus PCIe C wake-up signal PCIe C reset signal PCIe C clock request signal PCIe D reference clock minus, Reserved PCIe D reference clock plus, Reserved PCIe D Tx0 minus, Reserved PCIe D Tx0 plus, Reserved PCIe D Rx0 minus, Reserved PCIe D Rx0 plus, Reserved MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT and RF co-exist control signals MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 18/24 Pin Name Pin No. Type Power Domain Reset Value Pin Description GPIO78/
PCIE_D_CLKREQN 162 DO VDD_EXT_1V8 PD and RF co-exist control signals MT6890 GPIO, used for 2+2+4 and 4+4+4 WIFI/BT and RF co-exist control signals JTAG TDI TCK TDO TRST_N TMS SYSRSTB I2C I2C_SDA0 I2C_SCL0 I2S I2S0_DO I2S0_MCK I2S0_DI I2S0_BCK I2S0_LRCK ADC ADC0 ADC1 Debug UART DBG_UART_TX DBG_UART_RX UART AP_UCTS1 AP_URTS1 AP_UTXD1 AP_URXD1 SPI SPI0_MISO SPI0_MOSI SPI0_CSB SPI0_CLK AUDIO CODEC CDC_RESET_N CDC_INT1_N 183 186 189 295 296 297 115 112 103 94 104 101 105 249 252 129 126 79 64 77 73 5 8 6 9 98 100 DI DI VDD_EXT_1V8 PD JTAG TDIReserved VDD_EXT_1V8 PD JTAG TCKReserved DO VDD_EXT_1V8 PD JTAG TDOReserved DI DI DI VDD_EXT_1V8 PD JTAG TRSTReserved VDD_EXT_1V8 PD JTAG TMSReserved VDD_EXT_1V8 PD System resetReserved DIO DO VDD_EXT_1V8 PU VDD_EXT_1V8 PU I2C data I2C clock DO DO DI DO DO AI AI VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD I2S data output signal I2S clock output signal I2S data input signal I2S data bit clock signal I2S frame clock signal VDD_EXT_1V8 -
VDD_EXT_1V8 -
A/D conversion channel 0 A/D conversion channel 1 DO VDD_EXT_1V8 PU DI VDD_EXT_1V8 PU DI DO DO DI DI DO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD Debug UART data transmission Debug UART data reception UART receive ready signal UART transmit request signal UART transmit signal UART receive signal SPI interface input signal SPI interface output signal SPI interface chip select signal SPI interface clock signal External CODEC reset signal External CODEC interrupt signal Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 19/24 Pin Name Pin No. Type Power Domain Reset Value Pin Description AUDIO_PWR_EN 107 DO VDD_EXT_1V8 PD LCD LSCK 80 DO VDD_EXT_1V8 PD LSDA 72 DO/DI VDD_EXT_1V8 PD LSA0 LSCE0B 75 71 DO VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD LSDI 74 DI VDD_EXT_1V8 PD LRSTB DSI_TE DISP_PWM LCM_RST LCD_PWR_EN1 LCD_PWR_EN2 DSI0_CKN DSI0_CKP DSI0_D0N DSI0_D0P DSI0_D1N DSI0_D1P WIFI/BT BT_UTXD BT_URXD 78 141 156 288 298 180 406 407 405 404 408 409 135 138 DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD AVDD12_DSI AVDD12_DSI AVDD12_DSI AVDD12_DSI AVDD12_DSI AVDD12_DSI
DO DO DO AIO AIO AIO AIO AIO AIO DO DI External CODEC power enable CLK signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD CLK signal Data signal for DBI-C serial 3/4 wire SPI LCD. For type interface I LCD, is data input/output signal. For type interface II LCD, is data output signal from FG360 module and connect to LCD data in signal RS signal for DBI-C serial 4 wire SPI LCD, DBI-C serial 3 wire SPI LCD not has this signal CS signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD CS signal Data signal for DBI-C serial 3/4 wire SPI LCD. For type interface II LCD, is data input signal from FG360 module and connect to LCD data output signal. For type interface I LCD, not has this signal Reset signal for DBI-C serial 3/4 wire SPI LCD, connect to LCD RST signal LCD frame synchronization signal LCD Backlight control PWM signal DSI LCD reset signal LCD power supply enable 1 LCD power supply enable 2 DSI LCD MIPI CLK minus DSI LCD MIPI CLK plus DSI LCD MIPI lane0 minus DSI LCD MIPI lane0 plus DSI LCD MIPI lane1 minus DSI LCD MIPI lane1 plus VDD_EXT_1V8 PD VDD_EXT_1V8 PD UART TX signal UART RX signal Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 20/24 UART RTS signal UART CTS signal PCM data output PCM data input PCM clock output PCM synchronization signal MT6890 GPIO, used for control WIFI RESET signal or WIFI Power enable signal MT6890 GPIO, used for control WIFI RESET signal or WIFI Power enable signal MT6890 GPIO, used for control WIFI RESET signal or WIFI Power enable signal Interrupt input signal, used as WLAN_EN WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI/BT and RF co-exist control signals WIFI control signal 1, Reserved WIFI control signal 2, Reserved Pin Name BT_URTS BT_UCTS PCM0_DO PCM0_DI PCM0_CLK PCM0_SYNC Pin No. 282 283 97 95 96 93 Type Power Domain Reset Value Pin Description DO DI DO DI DO DO VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD VDD_EXT_1V8 PD EINT16 144 DO VDD_EXT_1V8 PD EINT17 27 DO VDD_EXT_1V8 PD EINT18 EINT15 279 212 DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD BT_PRI_RXD 150 DI VDD_EXT_1V8 PD BT_ACT_TXD 153 DO VDD_EXT_1V8 PD WLAN_ACT PTA_TX PTA_RX WIFI_GPIO1 WIFI_GPIO2 MMW NC NC NC NC NC NC NC NC NC NC NC NC Reserved RESERVED NC 287 99 102 286 291 237 223 217 240 235 229 243 247 241 246 259 253 23, 32, 48, 293,426~430 DI VDD_EXT_1V8 PD DO VDD_EXT_1V8 PD DI VDD_EXT_1V8 PD DIO VDD_EXT_1V8 PD DIO VDD_EXT_1V8 PD
Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 21/24 Type Power Domain Reset Value Pin Description
Pin Name NC Pin No. 165,168,171, 174,177,231, 255,290,292, 294,410~425 Pin Name Pin No. 19, 31, 35, 36, 42, 50, 52, 81, 82, 83, 90, 91, 92, 118, 119, 122, 124, 125, 127, 128, 131, 132, 133, 134, 136, 137, 140, 142, 143, 145, 146, 147, 149, 151, 152, 154, 155, 158, 160, 161, 163, 164, 167, 169, 170, 172, 173, 176, 178, 179, 181, 182, 185, 187, 188, 190, 191, 192, 194, 195, 196, 197, 200, 202, 203, 206, 208, 213, 214, 215, 218, 220, 221, 222, 224, 226, 227, 228, 230, 232, 233, 234, 236, 238, 239, 242, 244, 245, 248, 250, 251, 254, 256, 257, 258, 260, 262, 266, 277, 284, 289, 299, 300, 301, 302, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370, 371, 372, 373, 374, 375, 376, 377, 378, 379, 380, 381, 382, 383, 384, 385, 386, 387, 388, 389, 390, 391, 392, 397,398 GND GND Note 1. The PWRKEY and SYS_RESIN_N pins have internal pull-up, and the pull-up power supply is in exclusive mode; no external pull-up is required; PON_1 pin module with weak pull-down, maximum input voltage must not exceed VBAT_BB. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 22/24 4 Structural Specification 4.1 Product Appearance The appearance of the FG360 module product is as shown:
Figure 4-1 Module product appearance 4.2 Dimension of Structure The structural dimensions of the FG360 module are shown in the figure:
Figure 4-2 Structure size chart Note Unmarked dimensional tolerances are 0.1mm. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 23/24 4.3 Storage Refer to FIBOCOM FG360-NA Series SMT Design Guide. 4.4 Packing Refer to FIBOCOM FG360-NA Series SMT Design Guide. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved. FG360-NA Hardware Guide 24/24