FCC ID: ZMOSC218NA LTE Module with Bluetooth and WiFi

FIDOCCON

$C218-NA 20 1C:21374-SC218NA FCC ID:ZMOSC218NA S/N:XXXXXXXXXX IMEI 1 :XXXXXXXXXXXXXXX IMEI2:XXXXXXXXXXXXXXK 10*10 CHERISHES) IIMEL1;IME12;S/N; WIFI MAC;BT MAC

Fibocom Wireless Inc. To: Federal Communications Commission Date: 2023/10/24 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Fibocom Wireless Inc. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Fibocom Wireless Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Type of Equipment subject to FCC Certification:LTE Module FCC ID:ZMOSC218NA If you have any questions, please feel free to contact me Contact Person:

Position in the Company: Certification Director Date of Signature:

2023-10-24 Patrick Ma ___________________________ Signatory

(signature of the applicant)

1101,Tower A, Building 6, Shenzhen International, Innovation Valley, Dashi 1st Rd, Nanshan, Fibocom Wireless Inc. ShenZhen, China Tel: +8675526733555 ; Fax: +86-755-26520841 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern,

[Fibocom Wireless Inc. Grantee Code ZMO, FRN:0020891057] (the applicant) certifies that, as of the date of the filing of application, [Fibocom Wireless USA] (the agent) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information of agent are:

U.S. Agent: Fibocom Wireless USA FCC Registration Number (FRN): 0033437914 Physical U.S. address: 5909 Peachtree Dunwoody Rd Ste 910 Atlanta, GA 30328 United States Contact: Lei Yao Phone: +01 (469)463-6983 Email: Lei.yao@fibocom.com The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent Name: Patrick Ma Email: mapx@fibocom.com Date: April 21, 2023 Name: Lei Yao Email: Lei.yao@fibocom.com Date: April 21, 2023

Fibocom Wireless Inc. Date:2023-10-24 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: ZMOSC218NA To Whom it may concern:

requests Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Fibocom Wireless Inc. information hereby accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public to the Applicant and provide disclosure of unjustified benefits to its competitors. these matters might be harmful confidentiality treatment certain and of We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Fibocom Wireless Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 9 Description Block Diagram Operational Description Schematics BOM Tune up procedure External Photos Internal Photos Test-Setup Photos User Manual to Rule 0.457, disclosure of The Applicant understands that pursuant this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory:

Name:Patrick Ma Company name:Fibocom Wireless Inc. Address:1101,Tower A, Building 6, Shenzhen International Dashi 1st Rd, Nanshan, Shenzhen, China Tel: +8675526733555 Email: mapx@fibocom.com Innovation Valley,

Fibocom Wireless Inc. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: ZMOSC218NA

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2472 MHz 2422 2462 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No 5500 5720 MHz Yes, No 5510 5670 MHz Yes, No passive scanning

(where the device is can listen only with no probes) Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No No Yes, No Yes, No Yes, No Yes, Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. Yes , No

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. No Apply , Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed Name : Patrick Ma Position : Certification Director

Fibocom Wireless Inc. Modular Approval Request Letter Date:

FCC ID:

2023-10-24 ZMOSC218NA Type of Equipment: LTE Module The following requirements according to FCC Part 15.212 are met:

i RF shielding The radio portion has his own shielding (see external photos). ii Buffered modulation/data inputs has been integrated in the chipset iii Power supply regulation is integrated iv Antenna requirements section 15.203, 15.204 b and 15.204 c The module comes with one permanently attached antennas. The spurious emission requirements are fulfilled (see attached test report). v Stand alone test configuration Please referring to test set up configuration photo vi Labelling The module has its own label. The instruction for labelling rules for the host device has been stated in the users manual vii Compliance on specific rule or operating requirements The required FCC rules has been fulfilled and all instructions for maintaining compliance has been clearly stated in the users manual viii RF Exposure RF exposure requirements are fulfilled for mobile configuration. The installation of the module is restricted to mobile host devices what is clearly stated in the installation instruction of the user manual. For portable applications OEM integrators need SAR evaluation and an own FCC ID. Name: Patrick Ma Title: Certification Director Company: Fibocom Wireless Inc. version01

Fibocom Wireless Inc. Date: 2023-10-24 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Fibocom Wireless Inc., the undersigned, hereby authorizes Miss. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Fibocom Wireless Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID:ZMOSC218NA including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Fibocom Wireless Inc. in connection with the Application shall have the same effect as acts of the Fibocom Wireless Inc.. Fibocom Wireless Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name:Patrick Ma Title:Certification Director Tel:+8675526733555 Email: mapx@fibocom.com Company name: Fibocom Wireless Inc.