|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2024-07-09
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Fibocom Wireless Inc.
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0020891057
|
|
1 2 3 4
|
Physical Address |
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
|
|
1 2 3 4
|
1101,Tower A, Building 6, Shenzhen International
|
|
1 2 3 4
|
ShenZhen, N/A
|
|
1 2 3 4
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
b******@phoenix-testlab.de
|
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
ZMO
|
|
1 2 3 4
|
Equipment Product Code |
SC171W
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
P**** M****
|
|
1 2 3 4
|
Title |
Certification Director
|
|
1 2 3 4
|
Telephone Number |
+8675********
|
|
1 2 3 4
|
Fax Number |
+86-7********
|
|
1 2 3 4
|
E-mail |
m******@fibocom.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 | 6XD - 15E 6 GHz Low Power Indoor Client |
| 1 2 3 4 | DTS - Digital Transmission System |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI Module |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Single Module approval is filing. Output power is maximum conducted.
This device supports IEEE 802.11 a/n/ac/ax 20, 40, 80 and 160 MHz channel
bandwidths. This device supports MIMO 2T2R.
This device has integrated DSS, DTS, NII and 6XD transmitters certified under the
same FCC ID. This module is designed for Mobile device application and only
documented Antenna and permitted gain can be used in OEM installation. Use of
additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular
Approval for mobile RF Exposure conditions. OEM integrators must be provided
with antenna installation instructions to satisfy RF exposure compliance. the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons. This grant is valid only when the device
is sold to OEM integrators and the OEM integrators are instructed to ensure that
the end user has no manual instructions to remove or install the device. |
| 1 2 3 4 | Single Module approval is filing. Output power is maximum conducted.
This device has integrated DSS, DTS, NII and 6XD transmitters certified under the
same FCC ID. This module is designed for Mobile device application and only
documented Antenna and permitted gain can be used in OEM installation. Use of
additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular
Approval for mobile RF Exposure conditions. OEM integrators must be provided
with antenna installation instructions to satisfy RF exposure compliance. the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons. This grant is valid only when the device
is sold to OEM integrators and the OEM integrators are instructed to ensure that
the end user has no manual instructions to remove or install the device. |
| 1 2 3 4 | Single Module approval is filing. Output power is maximum EIRP. This device
supports IEEE 802.11 ax 20, 40, 80 and 160 MHz channel bandwidths. This
device supports MIMO 2T2R. This device has integrated DSS, DTS, NII and
6XD transmitters certified under the same FCC ID. This module is designed for
Mobile device application and only documented Antenna and permitted gain can
be used in OEM installation. Use of additional antenna(s) are subject to the
requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure
conditions. OEM integrators must be provided with antenna installation
instructions to satisfy RF exposure compliance. the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20cm
from all persons. This grant is valid only when the device is sold to OEM
integrators and the OEM integrators are instructed to ensure that the end user
has no manual instructions to remove or install the device. |
| 1 2 3 4 | Single Module approval is filing. Output power is maximum conducted.
This device supports IEEE 802.11 b/g/n20/n40/ax20/ax40 MHz channel
bandwidths.
This device supports MIMO 2T2R.
This device has integrated DSS, DTS, NII and 6XD transmitters certified under
the same FCC ID. This module is designed for Mobile device application and
only documented Antenna and permitted gain can be used in OEM installation.
Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).
Modular Approval for mobile RF Exposure conditions. OEM integrators must be
provided with antenna installation instructions to satisfy RF exposure
compliance. the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20cm from all persons. This grant is
valid only when the device is sold to OEM integrators and the OEM integrators
are instructed to ensure that the end user has no manual instructions to remove
or install the device. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
The State Radio_monitoring_center Testing Center
|
|
1 2 3 4
|
Name |
S******** Y********
|
|
1 2 3 4
|
Telephone Number |
+86-1********
|
|
1 2 3 4
|
E-mail |
s******@srtc.org.cn
|
|