FCC ID: IPH-A2AVGC00 Connected Personal Navigation Device

Important Safety and Product Information WARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. Installation and Operation Warnings When installing the device in a vehicle, place the device securely so it does not obstruct the drivers view of the road or interfere with vehicle operating controls, such as the steering wheel, the foot pedals, or the transmission levers. Do not place the device in front of or above any airbag. (See diagram.) Do not mount where drivers field of vision is blocked. Do not mount in front of an airbag field of deployment. Do not place unsecured on the vehicle dashboard. The windshield mount may not stay attached to the windshield in all circumstances. Do not place the mount where it will become a distraction if the mount should become detached. Keep your windshield clean to help ensure that the mount stays on the windshield. Always use your best judgement, and operate the vehicle in a safe manner. Do not become distracted by the device while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the device screen while driving and use voice prompts when possible. Do not input destinations, change settings, or access any functions requiring prolonged use of the device controls while driving. Pull over in a safe and legal manner before attempting such operations. When navigating, carefully compare information displayed on the device to all available navigation sources, including road signs, road closures, road conditions, traffic congestion, weather conditions, and other factors that may affect safety while driving. For safety, always resolve any discrepancies before continuing navigation, and defer to posted road signs and road conditions. The device is designed to provide route suggestions. It is not a replacement for driver attentiveness and good judgement. Do not follow route suggestions if they suggest an unsafe or illegal maneuver or would place the vehicle in an unsafe situation. Battery Warnings If these guidelines are not followed, the internal lithium-ion battery may experience a shortened life span or may present a risk of damage to the GPS device, fire, chemical burn, electrolyte leak, and/or injury. Do not leave the device exposed to a heat source or in a high-temperature location, such as in the sun in an unattended vehicle. To prevent damage, remove the device from the vehicle or store it out of direct sunlight, such as in the glove box. Do not puncture or incinerate the device or battery. When storing the device for an extended time, store within the following temperature range: from 32 to 77F (from 0 to 25C). Do not operate the device outside of the following temperature range: from -4 to 131F (from -20 to 55C). Contact your local waste disposal department to dispose of the device/battery in accordance with applicable local laws and regulations. Additional User-Replaceable Battery Warnings:

Do not use a sharp object to remove the battery. Keep the battery away from children. Do not disassemble, puncture, or damage the battery. If using an external battery charger, only use the Garmin accessory approved for your product. 190-01505-90_0C.indd 1 10/10/2012 8:02:25 AM Only replace the battery with the correct replacement battery. Using another battery presents a risk of fire or explosion. To purchase a replacement battery, see your Garmin dealer or the Garmin Web site. Additional Non-User-Replaceable Battery Warning:

Do not remove or attempt to remove the non-user-

replaceable battery. NOTICE Windshield Mounting Legal Restrictions Before using the suction cup mount on your windshield, check the state and local laws and ordinances where you drive. Some state laws prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other state laws allow the suction mount to be located only in specific locations on the windshield. Many other states have enacted restrictions against placing objects on the windshield in locations that obstruct the drivers vision. IT IS THE USERS RESPONSIBILITY TO MOUNT THE GARMIN DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES. Where required, other Garmin dashboard or friction mount options should be used. Always mount your Garmin device in a location that does not obstruct the drivers view of the road. Garmin does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your Garmin device. Map Data Information Garmin uses a combination of governmental and private data sources. Virtually all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive. Radio Frequency Exposure This device is a mobile transmitter and receiver that uses its antenna to send and receive low levels of radio frequency

(RF) energy for data communications. The device emits RF energy below the published limits when operating in its maximum output power mode and when used with Garmin authorized accessories. To comply with FCC and Industry Canada RF exposure compliance requirements, the device should be used in its automobile mount or as a handheld device only. The device should not be used in other configurations. This device has been shown to be compliant with FCC RF exposure requirements for a minimum distance of 10mm between the device and the body and zero distance for hand operation. This device must not be co-located or operated in conjunction with any other transmitter or antenna. For actual SAR values, go to http://www.garmin.com

/compliance. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. 190-01505-90_0C.indd 2 10/10/2012 8:02:25 AM Increase the separation between the equipment and the receiver. for help. Connect the equipment into an outlet that is on a different circuit from the GPS unit. Consult the dealer or an experienced radio/TV technician This product does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. Industry Canada Compliance Category I radiocommunication devices comply with Industry Canada Standard RSS-210. Category II radiocommunication devices comply with Industry Canada Standard RSS-310. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device has been shown to be compliant with Industry Canada RF exposure requirements for a minimum distance of 10mm between the device and the body and zero distance for hand operation. Conformit aux normes dIndustrie Canada Les appareils de radiocommunication de catgorie I sont conformes la norme RSS-210 dIndustrie Canada. Les appareils de radiocommunication de catgorie II sont conformes la norme RSS-310 dIndustrie Canada. Cet appareil est conforme aux normes RSS sans licence dIndustrie Canada. Son fonctionnement est soumis aux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrences et (2) doit accepter toute interfrence, y compris les interfrences pouvant entraner un fonctionnement indsirable de lappareil. Cet appareil a t test et rpond aux critres dexposition aux champs de radiofrquences dIndustrie Canada pour une distance minimum de 10 mm entre lappareil et le corps humain et une distance nulle pour une utilisation manuelle. Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an authorized service provider of Garmin; or (v) damage to a product that has been modified or altered without the written permission of Garmin. In addition, Garmin reserves the right to refuse warranty claims against products or services that are obtained and/or used in contravention of the laws of any country. This product is intended to be used only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. Garmin makes no warranty as to the accuracy or completeness of map data in this product. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY 190-01505-90_0C.indd 3 10/10/2012 8:02:25 AM pack the device and a copy of the original sales receipt, which is required as the proof of purchase for warranty repairs. Write the tracking number clearly on the outside of the package. Send the device, freight charges prepaid, to any Garmin warranty service station. Online Auction Purchases: Products purchased through online auctions are not eligible for warranty coverage. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction. OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR ANY TRAFFIC FINES OR CITATIONS, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Garmin retains the exclusive right to repair or replace (with a new or newly-overhauled replacement product) the device or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. Securely 2012 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA October 2012 Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK www.garmin.com 190-01505-90_0C Garmin Corporation No. 68 Zhangshu 2nd Road Xizhi Dist., New Taipei City, 221, Taiwan (R.O.C.) Printed in Taiwan 190-01505-90_0C.indd 4 10/10/2012 8:02:25 AM

Garmin fleet 590 Quick Start Manual October 2012 190-01505-01_0B Printed in Taiwan 190-01505-01_0B.indd 1 10/17/2012 1:58:32 PM Fleet Subscription Before you can use the fleet management features on the device, your company must have an active fleet subscription. Connecting the Device to Vehicle Power WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store it out of direct sunlight. NOTICE In order for the device to receive fleet management information, do not unplug the power cable. Before you use your device on battery power, you should charge it. 1. Plug the vehicle power cable into the USB port on the mount

. 2. Snap the mount onto the suction cup . 3. Press the suction cup to the windshield. 4. While pressing, flip the lever back toward the windshield. 5. Fit the bottom of your device into the mount. 6. Tilt your device back until it snaps into place. 2 Garmin fleet 590 Quick Start Manual 190-01505-01_0B.indd 2 10/17/2012 1:58:32 PM 7. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Turning Off the Device 1. Hold the Power key for four seconds. Select to view the map. Select to find a destination. Select to open the menu of tools and settings. New Stops and Messages Your device displays notifications when you receive new stops or messages. 2. Select Off. Using the Main Menu Select to enter the time clock. On the main menu, a notification indicates when you have new messages, or (

On the map, stops,

) both. appears blue when you have new stops or messages. or On the tab or the tab, indicates the number of new stops or messages. Select to access messages and stops. Garmin fleet 590 Quick Start Manual 3 190-01505-01_0B.indd 3 10/17/2012 1:58:33 PM A blue notification indicates that new stops or messages have arrived since the last time you viewed the list of stops or messages. A gray notification indicates that you have unread messages or stops. Navigating to a Stop Before you can navigate to a stop, your company must send a stop to your device. 1. From the main menu, select

. Dispatch >

2. Select a stop. 3. Select Go!. 4 Viewing a Message Before you can view a message, your company must send a message to your device. 1. From the main menu, select Dispatch >

. 2. Select a message. Sending a Message You can send a short message to your company. Your device may include quick messages, which are pre-written messages loaded by your company. 1. From the main menu, select Dispatch >

. 2. Select an option:

To send a custom message, select New Message, and enter a message. To send a quick message, select Quick Message, and select a message. Garmin fleet 590 Quick Start Manual 190-01505-01_0B.indd 4 10/17/2012 1:58:33 PM 3. Select Send. Adding a User to the Time Clock Before you can add a user to the time clock, the user name must be provisioned by your company. If your company has enabled time clock PINs for the device, you must know the PIN for the user name you are adding. You can add multiple time clock users to the same device. 1. From the main menu, select Time Clock. 2. Select Add User. 3. Enter the user name provided by your company, select OK. 4. If necessary, enter the time clock PIN for the user name. The user name appears in the list in Validating status. When the server validates the user, the status changes Garmin fleet 590 Quick Start Manual to not set. Setting the Status of a User Before you can set the status of users, you must add one or more users to the device, and your company must send a list of statuses to the device. You can set the status of one or more time clock users. 1. From the main menu, select Time Clock. 2. If time clock PINs are enabled on the device, select your user name, and enter your time clock PIN. 3. Select one or more users. 4. Select Set Status. 5. Select the status. 5 190-01505-01_0B.indd 5 10/17/2012 1:58:33 PM About Points of Interest Finding Points of Interest 1. From the main menu, select Search > Points of Interest. 2. Select a category. 3. If necessary, select a subcategory. 4. Select a destination. Searching Within a Category To narrow your search results, you can search within some categories. 1. Select Search > Points of Interest. 2. Select a category. 3. If necessary, select a subcategory. 4. Select 5. Enter all or part of the name. 6. Select Done. Your Route on the Map NOTICE The speed limit icon feature is for information only and does not replace the drivers responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Your route is marked with a magenta line on the map. If you depart from the original route, your device recalculates the route. A speed limit icon could appear as you travel on major roadways. 6 Garmin fleet 590 Quick Start Manual 190-01505-01_0B.indd 6 10/17/2012 1:58:33 PM About Sleep Mode Sleep mode conserves battery power when your device is not in use. Using Sleep Mode While the device is on, select the power key to put the device into sleep mode. While the device is in sleep mode, select the power key, and double-tap to wake the device, if necessary. Using the Map Functions Select to view the next turn. If a view of a junction exists, the junction view appears. Select to view the turn list. Select to view stops. Select to view messages. Select to change the data field. Select to view the Where Am I? page. Select to view trip information. Garmin fleet 590 Quick Start Manual 7 190-01505-01_0B.indd 7 10/17/2012 1:58:33 PM www.garmin.com 00 358 19 311 001 00 33 1 5517 81 89 0180 5 / 42 76 46 - 880 0180 5 / 42 76 46 - 550 00 39 02 3669 9699 0800-0233937 815 69 555 00800 4412 454

+44 2380 662 915 00 35 1214 447 460 00 902 00 70 97 00 46 7744 52020 913-397-8200 1-800-800-1020 0808 2380000

+44 (0) 870.8501241 1-866-429-9296 43 (0) 3133 3181 0 00 32 2672 5254 00 45 4810 5050 Garmin and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin fleet is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. www.garmin.com/fleet Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Zhangshu 2nd Road, Xizhi Dist. New Taipei City, 221, Taiwan (R.O.C.) 2012 Garmin Ltd. or its subsidiaries 190-01505-01_0B.indd 8 10/17/2012 1:58:35 PM

To Whom It May Concern:

Subject: Final Version of User Manual WE, Garmin International of 1200 East 151st Street, Olathe, KS 66062, This is to confirm that the final version of the user manual will be provided to the certifying FCC-

TCB / IC-CB for upload to the FCC EAS and IC REL once final translations are done. This will be before the product launches and will contain all necessary updates that have been stipulated by the TCB. Van Ruggles 6/29/2012

11/15/2012 We the undersigned, would like to supersede documents associated with the certification of IPH-

A2AVGC00. The manuals are being superseded so final versions, including translations, can be captured. The documents to be superseded are:

A2AVGC00_User_Manual_1 A2AVGC00_User_Manual_2 Sincerely, Jay Everett Certification Team Lead Garmin International