all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 3.97 MiB | October 02 2016 | |||
1 2 |
|
Users Manual 1 | Users Manual | 204.43 KiB | October 02 2016 | |||
1 2 | Cover Letter(s) | October 02 2016 | ||||||
1 2 | Cover Letter(s) | October 02 2016 | ||||||
1 2 | Cover Letter(s) | October 02 2016 | ||||||
1 2 | External Photos | October 02 2016 | ||||||
1 2 | Internal Photos | October 02 2016 | ||||||
1 2 | ID Label/Location Info | October 02 2016 | ||||||
1 2 | Test Report | October 02 2016 | ||||||
1 2 | Test Setup Photos | October 02 2016 | ||||||
1 2 | RF Exposure Info | October 02 2016 | ||||||
1 2 | Test Report | October 02 2016 | ||||||
1 2 | Parts List/Tune Up Info | October 02 2016 |
1 2 | Users Manual | Users Manual | 3.97 MiB | October 02 2016 |
A02759 Quick Start Manual........................................................ 2 Manuel de dmarrage rapide.........................................4 January 2016 Printed in Taiwan 190-01978-91_0B A02759 Quick Start Manual Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Tips and Shortcuts Press Select Home from any screen to return to the Home to turn the chartplotter on. screen. Select Menu from any main screen to access additional settings about that screen. Press to adjust the backlight and lock the touchscreen. Press off. and select Power Off to turn the chartplotter Using the Touchscreen Drag or swipe your finger across the screen to pan or Tap the screen to select an item. scroll. Pinch two fingers together to zoom out. Spread two fingers apart to zoom in. On-Screen Buttons These on-screen buttons may be displayed on some screens and functions. Some buttons are accessible only in a combination page or SmartMode layout. Button Function Clears the on-screen icons and re-centers the screen on the boat Opens a full screen view of the item Creates a new waypoint Creates a route, with turns, to the destination Adds a turn to the route at the selected location Removes the last turn added from the route Creates a direct route, without turns, to the destination Creates an Auto Guidance route to the destination Begins navigation Ends navigation Acquires a radar target and begins tracking it Opens the menu for the page or function Opens the presets menu for the page or function Adding an Item to Favorites 1 From the home screen, select a category from the right. 2 Hold a button on the left. The item is added to the Favorites home screen category. 2 Customizing the Layout of a SmartMode or Combination Page You can customize the layout and data shown in the combination pages and SmartMode layouts. When you change the layout of a page in a display you are interacting with, the change appears only on that display, except for the SmartMode name and symbol. When you change the SmartMode name or symbol for the layout, the new name or symbol appears on all displays in the station. 1 Open a page to customize. 2 Select Menu. 3 Select Edit Layout or Edit Combo. 4 Select an option:
To change the name, select Name or Name &
Symbol > Name, enter a new name, and select Done. To change the SmartMode symbol, select Name &
Symbol > Symbol, and select a new symbol. To change the function of a portion of the screen, select the area to change, and select a function from the list on the right. To change the number of functions shown and the layout of the screen, select Layout, and select an option. To change how data appears on the page and additional data bars, select Overlays, and select an option. To change the type of data shown, select Overlays, select a data field, and select the new data type from the list on the right. Customizing the Data Overlays You can customize the data shown on a screen. 1 Select an option based on the type of screen you are viewing:
From a full screen view, select Menu > Edit Overlays. From a combination screen, select Menu > Edit Combo > Overlays. From a SmartMode screen, select Menu > Edit Layout > Overlays. TIP: To quickly change the data shown in an overlay box, hold the overlay box. 2 Select an item to customize the data and data bar:
To change the data shown in an overlay box, select the overlay box, select the new data to show, and select Back. To select the location and layout of the data overlay bar, select Data, and select an option. To customize the information shown when navigating, select Navigation, and select an option. To turn on other data bars, like the media controls, select Top Bar or Bottom Bar, and select the necessary options. 3 Select Done. Accessing Owner's Manuals on the Chartplotter 1 Select Info > Owner's Manual. Quick Start Manual 2 Select a manual. 3 Select Open. Downloading the Manuals You can get the latest owner's manual and translations of manuals from the web. 1 Go to www.garmin.com/manuals/A02759. TIP: To quickly open this web page, scan this code:
2 Download the manual. Basic Operation Marking Your Present Location as a Waypoint From any screen, select Mark. Creating a Waypoint on the Sonar Screen 1 From a sonar view, select 2 Select a location. 3 Select New Wpt or 4 If necessary, edit the waypoint information. Creating a Waypoint on the Chart 1 From a chart or a 3D chart view, select a location or
. object. 2 Select Create Waypoint or Marking an MOB or SOS Location 1 From any screen, select SOS. 2 Follow the on-screen instructions. Navigating to a Point on the Chart 1 From the Navigation chart or Fishing chart, select a location. 2 If necessary, select Navigate To. 3 Select an option:
. To create a route to the location, including turns, select Route To or To use Auto Guidance, select Auto Guidance or
. NOTE: Auto Guidance is available with premium charts, in some areas. 4 Review the course indicated by the magenta line. NOTE: When using Auto Guidance, a gray segment within any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the settings for minimum safe water depth and minimum safe obstacle height. 5 Follow the magenta line, steering to avoid land, shallow water, and other obstacles. Copying Waypoints, Routes, and Tracks to a Memory Card 1 Insert a memory card into the card slot. 2 Select Info > User Data > Data Transfer > Save to Card. Quick Start Manual 3 If necessary, select the memory card to copy data to. 4 Select an option:
To create a new file, select Add New File, and enter a name. To add the information to an existing file, select the file from the list. Showing Tracks From a chart or a 3D chart view, select Menu > Chart Menu > Waypoints and Tracks > Tracks > On. A trailing line on the chart indicates your track. Configuring the Recording Interval of the Track Log You can indicate the frequency at which the track plot is recorded. Recording more frequent plots is more accurate but fills the track log faster. The resolution interval is recommended for the most efficient use of memory. 1 Select Info > User Data > Tracks > Active Track Options > Interval > Interval. 2 Select an option:
To record the track based on a distance between points, select Distance > Change, and enter the distance. To record the track based on a time interval, select Time > Change, and enter the time interval. To record the track plot based on a variance from your course, select Resolution > Change, and enter the maximum error allowed from the true course before recording a track point. Selecting a Map If your product has both BlueChart g2 and Garmin LakeV HD built-in maps, you can select which map to use. Not all models have both types of built-in maps. 1 From the Navigation chart, select Menu > Built-In Map. 2 Select an option:
HD. When you are offshore, select BlueChart g2. Troubleshooting My device is not creating waypoints in the correct location You can manually enter a waypoint location to transfer and share data from one device to the next. If you have manually entered a waypoint using coordinates, and the location of the point does not appear where the point should be, the map datum and position format of the device may not match the map datum and position format originally used to mark the waypoint. Position format is the way in which the A02759 receiver's position appears on the screen. Commonly displayed as latitude/longitude in degrees and minutes, with options for degrees, minutes and second, degrees only, or one of several grid formats. 3 To navigate directly to the location, select Go To or When you are on an inland lake, select LakeV Map datum is a math model which depicts a part of the surface of the earth. Latitude and longitude lines on a paper map are referenced to a specific map datum. 1 Find out which map datum and position format was used when the original waypoint was created. If the original waypoint was taken from a map, there should be a legend on the map that lists the map datum and position format used to create that map. Most often this is found near the map key. NOTE: In order for the software update instructions to appear, the device must be fully booted before the card is inserted. 2 Open the memory card door . 2 On the chartplotter, select Settings > Preferences >
3 Select the correct map datum and position format Units. settings. 4 Create the waypoint again. My chartplotter will not acquire A02759 signals If the device is not acquiring satellite signals, there could be a few causes. If the chartplotter has moved a large distance since the last time it has acquired satellites or has been turned off for longer than a few weeks or months, the device may not be able to acquire the satellites correctly. Make sure the A02759 antenna has a clear view of the sky to receive the A02759 signal. If it is mounted inside of a cabin, it should be close to a window so it can receive the A02759 signal. Make sure the A02759 antenna is connected to the NMEA network. If the chartplotter has more than one A02759 antenna source, select a different source. Ensure the device is using the latest software, and update the device software if necessary (Software Update, page 4). Software Update You may need to update the device software when you install the device or add an accessory to the device. The software update requires either a Garmin memory card reader accessory or another Garmin chartplotter connected over the Garmin Marine Network. The Garmin memory card reader accessory is sold separately. Loading the New Software on a Memory Card 1 Insert a memory card into the card slot on the computer. Card. 2 Go to www.garmin.com/support/software/marine.html. 3 Select Download next to A02759 Series with SD 4 Read and agree to the terms. 5 Select Download. 6 Select Run. 7 Select the drive associated with the memory card, and select Next > Finish. Updating the Device Software Before you can update the software, you must obtain a software-update memory card or load the latest software onto a memory card. 1 Turn on the chartplotter, and wait for the home screen to appear. 4 3 Insert the memory card , and press it in until it clicks. 4 Close the door. 5 Follow the on-screen instructions. 6 Wait several minutes while the software update process completes. The device returns to normal operation after the software update process is complete. 7 Remove the memory card. NOTE: If the memory card is removed before the device restarts fully, the software update is not complete. A02759 Series Manuel de dmarrage rapide Introduction AVERTISSEMENT Consultez le guide Informations importantes sur le produit et la scurit inclus dans l'emballage du produit pour prendre connaissance des avertissements et autres informations importantes sur le produit. Conseils et raccourcis Appuyez sur Slectionnez Accueil partir de n'importe quel cran pour allumer le traceur. pour revenir l'cran d'accueil. Slectionnez Menu partir de n'importe quel cran principal pour accder aux paramtres supplmentaires de cet cran. Appuyez sur pour rgler le rtroclairage et verrouiller l'cran tactile. Appuyez sur le traceur. et slectionnez teindre pour teindre Utilisation de l'cran tactile Touchez l'cran pour slectionner un lment. Faites glisser votre doigt sur l'cran pour le faire dfiler ou pour effectuer un panoramique. Resserrez vos deux doigts pour effectuer un zoom arrire. Ecartez vos deux doigts pour effectuer un zoom avant. Boutons l'cran Ces boutons l'cran apparaissent sur certains crans et pour certaines fonctions. Certains boutons ne sont accessibles que sur les pages combines ou les dispositions SmartMode. Manuel de dmarrage rapide Bouton Fonction Efface les icnes prsentes l'cran et recentre l'cran sur le bateau. Ouvre une vue plein cran de l'lment slectionn. Permet de crer un waypoint. Permet de crer un itinraire, avec des virages, vers une destination. Permet d'ajouter un virage un itinraire la position slectionne. Supprimer le dernier virage ajout un itinraire. Permet de crer un itinraire direct, sans virage, vers une destination. Permet de crer un itinraire d'auto guidage vers une destination. Dmarre la navigation. Arrte la navigation. Permet d'acqurir une cible radar et de la suivre. Ouvre le menu d'une page ou d'une fonction. Ouvre le menu des prrglages d'une page ou d'une fonction. Ajout d'un objet aux favoris 1 Dans l'cran d'accueil, slectionnez une catgorie sur la droite. 2 Maintenez enfonc un bouton sur la gauche. L'objet est ajout la catgorie de l'cran d'accueil Favoris. Personnalisation de la disposition d'une page SmartMode ou combine Vous pouvez personnaliser la disposition et les donnes affiches dans les pages combines et les dispositions SmartMode. Quand vous modifiez la disposition d'une page dans un affichage que vous utilisez, les modifications n'apparaissent que sur cet affichage, sauf en ce qui concerne le nom SmartMode et le symbole. Quand vous modifiez le nom SmartMode ou le symbole de cette disposition, cette modification apparat sur tous les crans de la station. 1 Ouvrez une page personnaliser. 2 Slectionnez Menu. 3 Slectionnez Modifier la disposition ou Modifier la page combine. 4 Slectionnez une option :
Pour modifier le nom, slectionnez Nom ou Nom et symbole > Nom, saisissez un nouveau nom, puis slectionnez Termin. Pour modifier le symbole SmartMode, slectionnez Nom et symbole > Symbole et choisissez un nouveau symbole. Pour modifier la fonction d'une partie de l'cran, slectionnez la zone modifier puis choisissez une fonction dans la liste situe droite. Pour modifier la disposition et le nombre de fonctions affiches sur un cran, slectionnez Disposition, puis choisissez une option. Pour modifier l'affichage des donnes sur la page et les barres de donnes supplmentaires, slectionnez Recouvrements, puis slectionnez une option. Pour modifier le type de donnes affiches, slectionnez Recouvrements, choisissez un champ de donnes et slectionnez dans la liste droite le nouveau type de donnes qui vous intresse. Personnalisation des recouvrements de donnes Vous pouvez personnaliser les donnes affiches sur un cran. 1 Slectionnez une option en fonction du type d'cran affich :
Sur un cran en plein cran, slectionnez Menu >
Modifier recouvrements. Sur un cran combin, slectionnez Menu >
Modifier la page combine > Recouvrements. Sur un cran SmartMode, slectionnez Menu >
Modifier la disposition > Recouvrements. ASTUCE : pour modifier rapidement les donnes affiches dans une zone de recouvrement, appuyez longuement sur cette zone. 2 Slectionnez un lment pour personnaliser les donnes et barres de donnes :
Pour modifier les donnes affiches dans une zone de recouvrement, slectionnez la zone, choisissez les nouvelles donnes afficher, puis slectionnez Retour. Pour choisir l'emplacement et la disposition de la barre de recouvrement de donnes, slectionnez Donnes et choisissez une option. Pour personnaliser les donnes affiches lors de la navigation, slectionnez Navigation, puis choisissez une option. Pour activer d'autres barres, comme les outils multimdias, slectionnez Barre supr. ou Barre infrieure, puis slectionnez les options souhaites. 3 Slectionnez Termin. Accs aux manuels d'utilisation du traceur 1 Slectionnez Info > Manuel d'utilisation. 2 Slectionnez un manuel. 3 Slectionnez Ouvert. Tlchargement des manuels Vous pouvez rcuprer le manuel d'utilisation et les traductions des manuels sur le Web. 1 Rendez-vous sur www.garmin.com/manuals
/A02759. ASTUCE : pour ouvrir rapidement cette page Web, scannez ce code :
2 Tlchargez le manuel. Manuel de dmarrage rapide 5 Oprations de base Marquage de votre position actuelle comme waypoint Depuis n'importe quel cran, slectionnez Marquer. Cration d'un waypoint sur l'cran du sondeur 1 Depuis une vue du sondeur, slectionnez 2 Slectionnez une position. 3 Slectionnez Nouveau waypoint ou 4 Au besoin, modifiez les informations du waypoint. Cration d'un waypoint sur la carte 1 Depuis une carte ou une vue 3D, slectionnez une
. position ou un objet. 2 Slectionnez Crer Waypoint ou Marquage d'une position de MOB (homme la mer) ou de SOS 1 Depuis n'importe quel cran, slectionnez SOS. 2 Suivez les instructions prsentes l'cran. Navigation vers une destination sur la carte 1 Depuis la carte de navigation ou la carte de pche, slectionnez une position. 2 Si besoin, slectionnez Naviguer jusqu'. 3 Slectionnez une option :
Pour naviguer directement vers la position, slectionnez Rallier ou
. Pour crer un itinraire vers cette position qui inclut les changements de direction, slectionnez Itinraire vers ou
. Pour utiliser l'auto guidage, slectionnez Auto
. guidage ou REMARQUE : la fonction Auto Guidage est disponible avec les cartes Premium dans certaines rgions. 4 Consultez le parcours reprsent par la ligne de couleur magenta. REMARQUE : lorsque vous utilisez la fonction Auto Guidage, les segments gris d'une ligne magenta indiquent qu'Auto Guidage ne peut effectuer aucun calcul sur ces parties de l'itinraire. Cela est d aux paramtres de profondeur de scurit minimum et de hauteur de scurit minimum pour franchir un obstacle. 5 Suivez la ligne magenta et barrez pour viter les rcifs, les hauts-fonds et autres obstacles. Copie de waypoints, itinraires et tracs sur une carte mmoire 1 Insrez une carte mmoire dans l'emplacement pour carte. 2 Slectionnez Info > Donnes utilisateur > Transfert de donnes > Enregistrer sur carte. 3 Si ncessaire, slectionnez la carte mmoire utilise pour la copie de donnes. 4 Slectionnez une option :
Pour crer un fichier, slectionnez Ajouter un nouveau fichier, puis saisissez un nom. Pour ajouter les informations un fichier existant, slectionnez celui-ci dans la liste. Affichage des tracs Depuis une carte ou une vue 3D, slectionnez Menu >
Menu Carte > Waypoints et tracs > Tracs >
Activ. Une ligne de sillage sur la carte indique votre trac. Configuration de l'intervalle d'enregistrement du journal de suivi Vous pouvez dfinir la frquence d'enregistrement du trac. L'enregistrement de tracs plus frquents accentue la prcision, mais sature plus rapidement le journal de suivi. L'intervalle de rsolution est recommand pour une utilisation optimale de la mmoire. 1 Slectionnez Info > Donnes utilisateur > Tracs >
Options du trac actif > Intervalle > Intervalle. 2 Slectionnez une option :
Pour enregistrer le trac en fonction de la distance qui spare deux points, slectionnez Distance >
Modifier, puis entrez la distance. Pour enregistrer le trac en fonction d'un intervalle de temps, slectionnez Heure > Modifier, puis entrez l'intervalle de temps. Pour enregistrer le trac en fonction d'une modification du parcours, slectionnez Rsolution
> Modifier et entrez la tolrance d'erreur de parcours admise avant d'enregistrer un point du trac. Slection d'une carte Si votre produit contient la fois les cartes intgres BlueChart g2 et Garmin LakeV HD, vous pouvez slectionner la carte utiliser. Tous les modles ne contiennent pas les deux types de carte intgre. 1 A partir de la carte de navigation, slectionnez Menu >
Carte intgre. 2 Slectionnez une option :
Si vous naviguez sur un lac, slectionnez LakeV HD. Si vous naviguez en mer, slectionnez BlueChart g2. Dpannage Mon appareil ne cre pas de waypoints la position correcte La saisie manuelle d'une position de waypoint permet de transfrer et de partager des donnes d'un appareil un autre. Si vous avez saisi manuellement un waypoint l'aide de coordonnes et si la position du point n'apparat pas l o elle le devrait, le systme godsique et le format de position de l'appareil ne correspondent peut-tre pas ceux utiliss initialement pour marquer le waypoint. Le format de position dsigne la manire dont la position du rcepteur A02759 apparat l'cran. Elle s'affiche gnralement sous forme d'une latitude/longitude en degrs et minutes, avec des options en degrs, minutes et secondes, en degrs seuls ou dans un des formats de grille. 6 Manuel de dmarrage rapide Un systme godsique est un modle mathmatique qui dpeint une partie de la surface de la terre. Les lignes de latitude et de longitude qui apparaissent sur une carte papier sont rfrences par rapport un systme godsique spcifique. 1 Trouvez le systme godsique et le format de position utiliss lors de la cration du waypoint initial. Si le waypoint initial a t obtenu partir d'une carte, celle-ci doit comporter des indications qui numrent le systme godsique et le format de position utiliss pour crer la carte. Ces indications se trouvent le plus souvent proximit de la lgende de la carte. 2 Sur le traceur, slectionnez Paramtres >
Prfrences > Units. 3 Slectionnez les paramtres adquats de systme godsique et de format de position. 4 Crez nouveau le waypoint. Mon traceur ne reoit pas les signaux A02759 Plusieurs causes peuvent expliquer que l'appareil n'acquire pas les signaux satellites. Si le traceur a t dplac sur une grande distance depuis sa dernire acquisition de satellites ou s'il a t teint pendant une priode de plus de quelques semaines ou quelques mois, il risque de ne pas tre en mesure de capturer correctement les signaux satellites. Assurez-vous que l'antenne A02759 dispose d'une vue dgage du ciel, afin qu'elle puisse recevoir les signaux A02759. S'il est install l'intrieur d'une cabine, alors il doit tre plac proximit d'une fentre pour qu'il puisse recevoir les signaux A02759. Assurez-vous que l'antenne A02759 est connecte au rseau NMEA. Si le traceur dispose de plusieurs sources d'antenne A02759, slectionnez-en une autre. Assurez-vous que votre appareil dispose de la dernire version du logiciel et mettez votre version jour si besoin (Mise jour du logiciel, page 7). 6 Slectionnez Excuter. 7 Slectionnez le lecteur associ la carte mmoire puis slectionnez Suivant > Terminer. Mise jour du logiciel de l'appareil Afin de pouvoir mettre jour le logiciel, vous devez vous procurer une carte mmoire de mise jour logicielle ou charger la dernire version du logiciel sur une carte mmoire. 1 Mettez le traceur sous tension et patientez pendant le dmarrage de l'cran d'accueil. REMARQUE : pour que les instructions de mise jour du logiciel apparaissent, l'appareil doit avoir t compltement dmarr avant que la carte ne soit insre. 2 Ouvrez la trappe de la carte mmoire . 3 Introduisez la carte mmoire et appuyez dessus jusqu' ce qu'elle s'enclenche. 4 Fermez la trappe. 5 Suivez les instructions prsentes l'cran. 6 Patientez quelques minutes le temps que la procdure de mise jour du logiciel s'excute. L'appareil reprend son fonctionnement normal lorsque le processus de mise jour du logiciel est termin. 7 Retirez la carte mmoire. REMARQUE : si la carte mmoire est retire avant que l'appareil ne redmarre compltement, la mise jour du logiciel n'est pas termine. Mise jour du logiciel Vous devrez peut-tre mettre jour le logiciel de l'appareil lorsque vous l'installerez ou que vous ajouterez un accessoire. Pour mettre jour le logiciel, vous devez disposer soit d'un lecteur de carte mmoire Garmin, soit d'un autre traceur Garmin connect au rseau Garmin Marine Network. Le lecteur de carte mmoire Garmin est un accessoire vendu sparment. Chargement du nouveau logiciel sur une carte mmoire 1 Insrez une carte mmoire dans le lecteur de carte SD de l'ordinateur. 2 Visitez le site www.garmin.com/support/software
/marine.html. 3 Slectionnez Tlcharger en regard de A02759 Series avec carte SD. 4 Lisez et approuvez les conditions. 5 Slectionnez Tlcharger. Manuel de dmarrage rapide 7
1 2 | Users Manual 1 | Users Manual | 204.43 KiB | October 02 2016 |
Important Safety and Product Information WARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. Marine Operation Warnings You are responsible for the safe and prudent operation of your vessel. This device is a tool that will enhance your capability to operate your vessel. It does not relieve you from the responsibility of safely operating your vessel. Avoid navigational hazards and never leave the helm unattended. Use this device only as a navigational aid. Do not attempt to use the device for any purpose requiring precise measurement of direction, distance, location, or topography. Always be prepared to promptly regain control of the vessel. Use caution near hazards in the water, such as docks, pilings and other vessels. If the device has navigating capabilities, when navigating, carefully compare information displayed on the device to all available navigation sources, including information from visual sightings, local waterway rules and restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing navigation. If the device uses maps, use the electronic chart in the device only to facilitate, not to replace, the use of authorized government charts. Official government charts and notices to mariners contain all information needed to navigate safely. If the device provides depth data, it should not be used as the primary means of preventing grounding or collision. Supplement depth data readings with information from applicable paper charts and visual indicators. Always operate the vessel at slow speeds if you suspect shallow water or submerged objects. Failure to heed this warning could lead to vessel damage or personal injury. If the device has video input capabilities, do not attempt to operate or watch video input while operating or navigating your vessel. Operating or watching the video input while the vessel is moving could cause an accident or collision resulting in property damage, serious injury, or death. Battery Warnings The device uses an internal, non-user-replaceable battery for various purposes, such as the real-time clock. If these guidelines are not followed, batteries may experience a shortened life span or may present a risk of damage to the device, fire, chemical burn, electrolyte leak, and/or injury. Do not remove or attempt to remove the non-user-replaceable battery. Contact your local waste disposal department to dispose of the device/batteries in accordance with applicable local laws and regulations. Product Environmental Programs Information about the Garmin product recycling program and WEEE, RoHS, REACH, and other compliance programs can be found at www.garmin.com/aboutGarmin/environment. Declaration of Conformity Hereby, Garmin declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, go to www.garmin.com/compliance. Industry Canada Compliance Category I radiocommunication devices comply with Industry Canada Standard RSS-210. Category II radiocommunication devices comply with Industry Canada Standard RSS-Gen. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency Radiation Exposure This device is a mobile transmitter and receiver that uses an internal antenna to send and receive low levels of radio frequency (RF) energy for data communications. The device emits RF energy below the published limits when operating in its maximum output power mode and when used with Garmin authorized accessories. To comply with RF exposure compliance requirements, the device should be installed and operated with a minimum of 20 cm (7.87 in.) between the device and your body. The device should not be used in other configurations. This device must not be co-located or operated in conjunction with any other transmitter or antenna. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet that is on a different circuit from the GPS device. Consult the dealer or an experienced radio/TV technician for help. This product does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. Software License Agreement BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries ("Garmin") grant you a limited license to use the software embedded in this device (the "Software") in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third-party providers. You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code form remains a valuable trade secret of Garmin and/or its third-party providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America or the export control laws of any other applicable country. Map Data Information Garmin uses a combination of governmental and private data sources. Virtually all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive. 2 Increase the separation between the equipment and the receiver. Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an authorized service provider of Garmin; or (v) damage to a product that has been modified or altered without the written permission of Garmin, or (vi) damage to a product that has been connected to power and/or data cables that are not supplied by Garmin. In addition, Garmin reserves the right to refuse warranty claims against products or services that are obtained and/or used in contravention of the laws of any country. Our navigation products are intended to be used only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. Garmin makes no warranty as to the accuracy or completeness of map data. Repairs have a 90 day warranty. If the unit sent in is still under its original warranty, then the new warranty is 90 days or to the end of the original 1 year warranty, depending upon which is longer. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL Garmin BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Garmin retains the exclusive right to repair or replace (with a new or newly-overhauled replacement product) the device or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. Securely pack the device and a copy of the original sales receipt, which is required as the proof of purchase for warranty repairs. Write the tracking number clearly on the outside of the package. Send the device, freight charges prepaid, to any Garmin warranty service station. Online Auction Purchases: Products purchased through online auctions are not eligible for rebates or other special offers from Garmin warranty coverage. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction. International Purchases: A separate warranty may be provided by international distributors for devices purchased outside the United States depending on the country. If applicable, this warranty is provided by the local in-country distributor and this distributor provides local service for your device. Distributor warranties are only valid in the area of intended distribution. Devices purchased in the United States or Canada must be returned to the Garmin service center in the United Kingdom, the United States, Canada, or Taiwan for service. Marine Warranty Policy: Certain Garmin Marine products in certain areas have a longer warranty period and additional terms and conditions. Go to www.garmin.com/support/warranty
.html for more details and to see if your product is covered under the Garmin Marine Warranty Policy. Australian Purchases: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits under our Limited Warranty are in addition to other rights and remedies under applicable law in relation to the products. Garmin Australasia, 30 Clay Place, Eastern Creek, NSW, Australia, 2766. Phone: 1800 235 822. Informations importantes sur le produit et la scurit AVERTISSEMENT Si vous ne prenez pas de prcautions pour viter les situations potentiellement dangereuses nonces ci-aprs, vous risquez un accident ou une collision pouvant entraner des blessures graves, voire mortelles. Avertissements d'utilisation en milieu marin Vous tes responsable de l'utilisation sre et prudente de votre bateau. Cet appareil est un outil qui optimisera votre capacit de pilotage. Il ne vous dgage pas de vos responsabilits en cas de non-respect de la scurit bord. Evitez tout danger de navigation et ne relchez pas votre surveillance de la barre. L'appareil doit tre utilis uniquement comme une aide la navigation. Ne tentez pas d'utiliser l'appareil des fins exigeant une mesure prcise de l'orientation, de la distance, de la position ou de la topographie. Soyez toujours prt reprendre les commandes du navire. Soyez vigilant proximit des points dangereux, tels que les quais et les autres navires. En cours de navigation, et si l'appareil dispose de fonctions de navigation, comparez attentivement les informations affiches par l'appareil toutes les autres sources d'information disponibles, notamment les repres visuels, les rgles et restrictions locales relatives aux voies navigables, ainsi que les cartes. Pour votre scurit, cherchez rsoudre tout dysfonctionnement ou problme avant de poursuivre la navigation. Si l'appareil utilise des cartes, utilisez la carte lectronique de l'appareil uniquement pour faciliter l'usage de cartes gouvernementales officielles, pas pour les remplacer. Seules les cartes gouvernementales officielles et les avis aux navigateurs contiennent toutes les informations ncessaires une navigation en toute scurit. Si l'appareil fournit des donnes de profondeur, celles-ci ne doivent pas tre utilises en premier recours afin d'viter les risques d'chouage ou de collision. Compltez les mesures des donnes de profondeur l'aide d'informations issues de cartes papier et d'indicateurs visuels applicables. Si vous suspectez la prsence d'un haut-fond ou d'objets immergs, naviguez toujours faible vitesse. L'ignorance de cet avertissement vous expose des risques de dtrioration du navire ou de blessures. Si l'appareil dispose de fonctions d'entre vido, n'utilisez pas l'entre vido en cours de navigation. Le visionnage de la vido lorsque le navire se dplace peut engendrer un accident ou une collision provoquant des dommages matriels et des blessures graves, voire mortelles. Avertissements relatifs la batterie L'appareil utilise une batterie interne, non remplaable par l'utilisateur, pour diffrentes raisons telles que celle de l'horloge en temps rel. Le non-respect de ces consignes peut causer une diminution de la dure de vie des batteries, endommager l'appareil ou prsenter un risque d'incendie, de brlure chimique, de fuite d'lectrolyte et/ou de blessure. N'essayez pas de retirer la batterie non remplaable par l'utilisateur. Contactez la dchetterie locale pour plus d'informations sur la mise au rebut de l'appareil ou des batteries dans le respect des lois et rglementations locales applicables. Programmes environnementaux Des informations relatives au programme Garmin de recyclage des produits ainsi qu'aux directives DEEE et RoHS, la rglementation REACH et aux autres programmes de conformit sont disponibles l'adresse www.garmin.com/aboutGarmin/environment. Dclaration de conformit Par la prsente, Garmin dclare que ce produit est conforme aux principales exigences et autres clauses pertinentes de la directive europenne 1999/5/CE. Pour prendre connaissance de l'intgralit de la dclaration de conformit, rendez-vous sur le site www.garmin.com
/compliance. Conformit aux normes d'Industrie Canada Les priphriques de radiocommunication de catgorie I sont conformes la norme RSS-210 d'Industrie Canada. Les priphriques de radiocommunication de catgorie II sont conformes la norme RSS-Gen d'Industrie Canada. Cet appareil est conforme aux normes RSS sans licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) ce priphrique ne doit pas causer d'interfrences et (2) doit accepter toute interfrence, y compris les interfrences pouvant entraner un fonctionnement indsirable de l'appareil. Contrat de licence du logiciel EN UTILISANT CE PRODUIT, VOUS RECONNAISSEZ ETRE LIE PAR LES TERMES DU PRESENT CONTRAT DE LICENCE DE LOGICIEL. LISEZ ATTENTIVEMENT CE CONTRAT DE LICENCE. Garmin Ltd. et ses filiales ( Garmin ) concdent une licence limite pour l'utilisation du logiciel intgr cet appareil (le Logiciel ) sous la forme d'un programme binaire excutable, dans le cadre du fonctionnement normal du produit. Tout titre, droit de proprit ou droit de proprit intellectuelle dans le Logiciel ou concernant le Logiciel est la proprit de Garmin et/ou de ses fournisseurs tiers. Vous reconnaissez que le Logiciel est la proprit de Garmin et/ou de ses fournisseurs tiers et qu'il est protg par les lois en vigueur aux Etats-Unis d'Amrique et par les traits internationaux relatifs aux droits d'auteur. Vous reconnaissez galement que la structure, l'organisation et le code du Logiciel, dont le code source n'est pas fourni, constituent d'importants secrets de fabrication de Garmin et/ou de ses fournisseurs tiers, et que le code source du Logiciel demeure un important secret de fabrication de Garmin et/ou de ses fournisseurs tiers. Vous acceptez de ne pas dcompiler, dsassembler, modifier, assembler rebours, tudier par rtro-ingnierie ou transcrire en langage humain intelligible le Logiciel ou toute partie du Logiciel, ou crer toute uvre drive du Logiciel. Vous acceptez de ne pas exporter ni de rexporter le Logiciel vers un pays contrevenant aux lois de contrle l'exportation des Etats-Unis d'Amrique ou celles de tout autre pays concern. Informations sur les donnes cartographiques Les donnes de Garmin proviennent la fois de sources publiques et prives. La quasi-totalit des sources de donnes contient une part d'informations inexactes ou incompltes. Dans certains pays, des informations cartographiques compltes et exactes sont soit indisponibles, soit proposes un cot prohibitif. Garantie limite Ce produit Garmin est garanti contre tout dfaut de matriel et de fabrication pendant un an compter de sa date d'achat. Durant cette priode, Garmin pourra, son entire discrtion, rparer ou remplacer tout composant qui s'avrerait dfectueux dans le cadre d'un usage normal. Ce type de rparation ou de remplacement ne sera pas factur au client, qu'il s'agisse des composants ou de la main-d'uvre, condition que le client prenne en charge les frais de port. Cette garantie ne couvre pas : (i) les dommages esthtiques, tels que les raflures, les rayures et les bosses ; (ii) les consommables, comme les piles, moins que le dommage ne soit d un dfaut matriel ou de fabrication ; (iii) les dommages provoqus par un accident, une utilisation abusive, une mauvaise utilisation, l'eau, une inondation, un incendie ou toute autre catastrophe naturelle ou cause extrieure ; (iv) les dommages provoqus par des fournisseurs de services non agrs par Garmin ; ou (v) les dommages sur un produit ayant t modifi sans l'autorisation crite de Garmin ; ou (vi) les dommages sur un produit raccord des cbles d'alimentation et/ou des cbles de donnes non fournis par Garmin. En outre, Garmin se rserve le droit de refuser toute demande de service sous garantie relative un produit ou service obtenu et/ou utilis en violation des lois de tout pays. Nos produits de navigation constituent uniquement une aide la navigation et ne doivent pas tre utiliss des fins exigeant l'valuation prcise de la direction, de la distance, de la position ou de la topographie. Garmin n'offre aucune garantie quant l'exactitude ou l'exhaustivit des donnes cartographiques. Les rparations sont garanties pendant 90 jours. Si l'unit envoye est toujours couverte par la garantie d'origine, cette nouvelle garantie court pendant un dlai de 90 jours ou jusqu' la fin de la priode de garantie d'origine qui est d'un an, selon la plus longue des deux priodes. LES GARANTIES ET RECOURS CONTENUS DANS LE PRESENT DOCUMENT SONT EXCLUSIFS ET ANNULENT TOUTE AUTRE GARANTIE EXPRESSE, IMPLICITE OU LEGALE, Y COMPRIS TOUTE RESPONSABILITE RESULTANT DE TOUTE GARANTIE DE QUALITE MARCHANDE OU D'ADEQUATION A UN USAGE PARTICULIER, QU'ELLE SOIT LEGALE OU AUTRE. CETTE GARANTIE VOUS OCTROIE DES DROITS PARTICULIERS, QUI PEUVENT VARIER D'UN ETAT A L'AUTRE. EN AUCUN CAS, LA SOCIETE Garmin NE SAURAIT ETRE TENUE RESPONSABLE DE TOUT DOMMAGE ACCESSOIRE, SPECIAL, INDIRECT OU CONSECUTIF RESULTANT DE L'UTILISATION, DE LA MAUVAISE UTILISATION OU DE L'IMPOSSIBILITE D'UTILISER CE PRODUIT, OU RESULTANT DE DEFAUTS DU PRODUIT. CERTAINS ETATS INTERDISANT L'EXCLUSION OU LA RESTRICTION DES DOMMAGES ACCESSOIRES OU CONSECUTIFS, LES RESTRICTIONS SUSMENTIONNEES PEUVENT NE PAS VOUS CONCERNER. Garmin se rserve le droit exclusif de rparer l'appareil ou le logiciel, de les remplacer (par un produit de remplacement neuf ou entirement rvis) ou de proposer le remboursement intgral du prix d'achat son entire discrtion. CE TYPE DE RECOURS SERA VOTRE RECOURS UNIQUE ET EXCLUSIF POUR TOUTE RUPTURE DE GARANTIE. Pour bnficier d'un service sous garantie, contactez votre revendeur agr Garmin ou appelez le service d'assistance produit de Garmin pour obtenir les instructions relatives l'expdition du produit, ainsi qu'un numro de suivi RMA. Emballez avec soin l'appareil en y joignant une copie de l'original de la facture, qui fera office de preuve d'achat dans le cas de rparations sous garantie. Inscrivez lisiblement le numro de suivi sur l'extrieur du paquet. Envoyez le priphrique, frais de port prpays, un centre de services sous garantie Garmin. Achats dans le cadre d'enchres en ligne : les produits achets au cours d'enchres en ligne ne peuvent faire l'objet de rabais ou d'autres offres spciales proposs par la garantie de Garmin. Les confirmations de vente aux enchres en ligne ne sont pas acceptes dans le cadre d'une vrification sous garantie. Pour bnficier d'un service sous garantie, l'original ou une copie de la facture dresse par le premier revendeur doit tre prsent. Garmin ne procdera aucun remplacement de composant manquant sur tout produit achet dans le cadre d'enchres en ligne. Achats internationaux : selon les pays, une garantie distincte peut tre accorde par les distributeurs internationaux pour les appareils achets hors des Etats-Unis. Le cas chant, cette garantie est fournie par le distributeur du pays d'achat et ledit distributeur prend en charge les services locaux ncessaires pour votre appareil. Les garanties distributeur sont valides uniquement dans les zones de distribution vises. En cas de problme, les appareils achets aux Etats-Unis ou au Canada doivent tre renvoys aux ateliers de rparations Garmin du Royaume-Uni, des Etats-Unis, du Canada ou de Tawan. Politique de garantie des produits marine : pour certains produits marine de Garmin de certaines rgions du monde, la priode de garantie est plus longue et des conditions supplmentaires s'appliquent. Rendez-vous sur le site www.garmin.com/support/warranty.html pour plus de dtails et pour savoir si votre produit est couvert par la garantie des produits marine de Garmin. 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-02-10 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2016-02-10
|
||||
1 2 | Applicant's complete, legal business name |
Garmin International Inc
|
||||
1 2 | FCC Registration Number (FRN) |
0005088588
|
||||
1 2 | Physical Address |
1200 E. 151st. Street
|
||||
1 2 |
Olathe, Kansas 66062
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
IPH
|
||||
1 2 | Equipment Product Code |
02759
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
D**** K****
|
||||
1 2 | Title |
Manager Environmental and Regulatory Affairs
|
||||
1 2 | Telephone Number |
91344********
|
||||
1 2 | Fax Number |
913 3********
|
||||
1 2 |
d******@garmin.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Low Power Transmitter 2402-2480 MHz | ||||
1 2 | Digital Transmission System 2402-2480 MHz | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. End-users must be provided with the specific operating instructions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Rogers Labs, Inc.
|
||||
1 2 | Name |
S******** R******
|
||||
1 2 | Telephone Number |
913-8********
|
||||
1 2 | Fax Number |
913-8********
|
||||
1 2 |
r******@pixius.net
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0200000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC