FCC ID: IPH-0282320 Dog Collar

Important Safety and Product Information WARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury. Navigation Warnings If your Garmin device uses or accepts mapping products, follow these guidelines to ensure safe navigating. Always carefully compare information displayed on the device to all available navigation sources, including information from visual sightings, local waterway rules and restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing navigation, and defer to posed signs and conditions. Use this device only as a navigational aid. Do not attempt to use the device for any purpose requiring precise measurement of direction, distance, location, or topography. Off-Road Navigation Warnings If your Garmin device is able to suggest off-road routes for various outdoor activities, such as biking, hiking, and all-terrain vehicles, follow these guidelines to ensure safe off-road navigation. Always use your best judgment and exercise common sense when making off-road navigational decisions. The Garmin device is designed to provide route suggestions only. It is not a replacement for attentiveness and proper preparation for outdoor activities. Do not follow the route suggestions if they suggest an illegal course or would put you in an unsafe situation. Always carefully compare information displayed on the device to all available navigation sources, including trail signs, trail conditions, weather conditions, and other factors that may affect safety while navigating. For safety, always resolve any discrepancies before continuing navigation, and defer to posted signs and conditions. Always be mindful of the effects of the environment and the inherent risks of the activity before embarking on off-road activities, especially the impact that weather and weather-related trail conditions can have on the safety of your activity. Ensure that you have the proper gear and supplies for your activity before navigating along unfamiliar paths and trails. Vehicle Installation Warnings When installing the device in a vehicle, place the device securely so it does not obstruct the drivers view of the road or interfere with vehicle operating controls, such as the steering wheel, foot pedals, or transmission levers. Do not place 2 unsecured on the vehicle dashboard . Do not place the device in front of or above any airbag . The windshield mount may not stay attached to the windshield in all circumstances. Do not place the mount where it will become a distraction if it should become detached. Keep your windshield clean to help ensure that the mount stays on the windshield. Street Navigation Warnings If your Garmin device accepts street maps and suggests routes that follow roads, follow these guidelines to ensure safe on-road navigation. Always use your best judgment, and operate the vehicle in a safe manner. Do not become distracted by the device while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the device screen while driving. Do not input destinations, change settings, or access any functions requiring prolonged use of the device controls while driving. Pull over in a safe and legal manner before attempting such operations. When navigating, carefully compare information displayed on the device to all available navigation sources, including road signs, road closures, road conditions, traffic congestion, weather conditions, and other factors that may affect safety while driving. For safety, always resolve any discrepancies before continuing navigation, and defer to posted signs and conditions. The device is designed to provide route suggestions. It is not a replacement for driver attentiveness and good judgement. Do not follow route suggestions if they suggest an illegal maneuver or would place the vehicle in an unsafe situation. Battery Warnings A replaceable lithium-ion battery pack can be used with the dog collar device. The handheld device can use either a lithium-ion battery pack or replaceable alkaline or NiMH batteries. Refer to the handheld device specifications in the manual for more information about the battery type used in your specific handheld device model. If these guidelines are not followed, batteries may experience a shortened life span or may present a risk of damage to the device, fire, chemical burn, electrolyte leak, and/or injury. Do not leave the device exposed to a heat source or in a high-

temperature location, such as in the sun in an unattended vehicle. To prevent the possibility of damage, remove the device from the vehicle or store it out of direct sunlight, such as in the glove box. Do not disassemble, modify, remanufacture, puncture or damage the device or batteries. Do not immerse or expose the device or batteries to water or other liquids, fire, explosion, or other hazard. Do not use a sharp object to remove the removable batteries. Keep batteries away from children. Do not use a power and/or data cable that is not approved or supplied by Garmin. If using an external battery charger, only use the Garmin accessory approved for your product. Only replace batteries with correct replacement batteries. Using other batteries presents a risk of fire or explosion. To purchase replacement batteries, see your Garmin dealer or the Garmin website. Do not operate the device outside of the temperature ranges specified in the printed manual in the product packaging. When storing the device for an extended time period, store within the temperature ranges specified in the printed manual in the product packaging. Do not leave the dog device where a dog may attempt to chew on it. If the battery cell is punctured, electrolyte can be released that can be harmful to the dog. Contact your local waste disposal department to dispose of the device/batteries in accordance with applicable local laws and regulations. FCC Warnings Exposure to Radio Frequency SignalsYour device is a radio transmitter and receiver. When it is on, it receives and also sends out radio frequency (RF) signals. Antenna CareUse only the supplied antenna or a recommended antenna accessory. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations. Warning: Do not use any radio that has a damaged antenna, because if it comes into contact with your skin, a minor burn can result. Electronic DevicesMost modern electronic equipment is shielded from RF signals. However, certain equipment may not be shielded against the RF signals from your wireless radio. PacemakersThe Health Industry Manufacturers Association

(HIMA) and Wireless Technology Research recommend that a minimum separation of six inches (6) be maintained between a handheld wireless radio and a pacemaker to avoid potential interference with the pacemaker. Persons with pacemakers should ALWAYS keep the radio more than six inches from their pacemaker when the radio is turned on, should not carry the radio in a breast pocket, and should turn the radio off immediately if you have any reason to suspect that interference is taking place. Hearing AidsSome digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Posted FacilitiesTurn your radio OFF in any facility where posted notices so require. VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Commercial AircraftMany commercial airlines prohibit the use of radios on board. Switch OFF your radio before boarding an aircraft or check the airline rules. Potentially Explosive AtmospheresTurn your radio OFF and do not remove your battery when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your battery in such areas could cause an explosion or fire resulting in bodily injury or even death. NOTICE Windshield Mounting Legal Restrictions Before using the suction cup mount on your windshield, check the state and local laws and ordinances where you drive. Some state laws prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other state laws allow the suction mount to be located only in specific locations on the windshield. Many other states have enacted restrictions against placing objects on the windshield in locations that obstruct the drivers vision. IT IS THE USER'S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES.Where required, other Garmin dashboard or friction mount options should be used. Always mount your Garmin device in a location that does not obstruct the drivers view of the road. Garmin does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your Garmin device. Legal Restrictions SPECIAL NOTICE TO USERS IN CALIFORNIA AND ALASKA:

State law in California prohibits the use of GPS dog collars for the pursuit of mammals. Alaska law prohibits guides from using GPS devices to assist in the taking of big game animals. This is not 3 intended to be an exhaustive list of applicable laws and ordinances, and Garmin makes no such guarantees or warranties that this list is complete. Check your state and local laws and ordinances to ensure you fully understand any restrictions applicable to this product in your jurisdiction prior to purchase and/or use. Garmin does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to use of the product. Product Environmental Programs Information about the Garmin product recycling program and WEEE, RoHS, REACH, and other compliance programs can be found at www.garmin.com/aboutGarmin/environment. Declaration of Conformity Hereby, Garmin declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, go to www.garmin.com/compliance. Industry Canada Compliance Category I radiocommunication devices comply with Industry Canada Standard RSS-210. Category II radiocommunication devices comply with Industry Canada Standard RSS-310. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. 4 help. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet that is on a different circuit from the GPS device. Consult the dealer or an experienced radio/TV technician for This product does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. Software License Agreement BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries ("Garmin") grant you a limited license to use the software embedded in this device (the

"Software") in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third-party providers. You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code form remains a valuable trade secret of Garmin and/or its third-party providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America or the export control laws of any other applicable country. Map Data Information Garmin uses a combination of governmental and private data sources. Virtually all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive. Limited Warranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an authorized service provider of Garmin; or (v) damage to a product that has been modified or altered without the written permission of Garmin, or (vi) damage to a product that has been connected to power and/or data cables that are not supplied by Garmin. In addition, Garmin reserves the right to refuse warranty claims against products or services that are obtained and/or used in contravention of the laws of any country. Our navigation products are intended to be used only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. Garmin makes no warranty as to the accuracy or completeness of map data. Repairs have a 90 day warranty. If the unit sent in is still under its original warranty, then the new warranty is 90 days or to the end of the original 1 year warranty, depending upon which is longer. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL Garmin BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Garmin retains the exclusive right to repair or replace (with a new or newly-overhauled replacement product) the device or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. Securely pack the device and a copy of the original sales receipt, which is required as the proof of purchase for warranty repairs. Write the tracking number clearly on the outside of the package. Send the device, freight charges prepaid, to any Garmin warranty service station. Online Auction Purchases: Products purchased through online auctions are not eligible for rebates or other special offers from Garmin warranty coverage. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction. International Purchases: A separate warranty may be provided by international distributors for devices purchased outside the United States depending on the country. If applicable, this warranty is provided by the local in-country distributor and this distributor provides local service for your device. Distributor warranties are only valid in the area of intended distribution. Devices purchased in the United States or Canada must be returned to the Garmin service center in the United Kingdom, the United States, Canada, or Taiwan for service. Australian Purchases: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits under our Limited Warranty are in addition to other rights and remedies under applicable law in relation to the products. Garmin Australasia, Unit 19, 167 Prospect Highway, Seven Hills, NSW, Australia, 2147, Phone: 1800 822 235 5 Radio Frequency Radiation Exposure This device is a mobile transmitter and receiver that uses an internal antenna to send and receive low levels of radio frequency (RF) energy for data communications. The device emits RF energy below the published limits when operating in its maximum output power mode and when used with Garmin authorized accessories. To comply with RF exposure compliance requirements, the device should be installed and operated with a minimum of 0.2m between the device and your body. The device should not be used in other configurations. This device must not be co-located or operated in conjunction with any other transmitter or antenna. For actual SAR values, go to www.garmin.com/compliance. Exposition aux rayonnements frquence radiolectrique Cet appareil est un transmetteur/rcepteur mobile qui utilise une antenne interne pour envoyer et recevoir des champs de radiofrquences de faible puissance lors des communications de donnes. Les champs de radiofrquences mis par lappareil lorsquil fonctionne au maximum de sa puissance et quil est utilis avec des accessoires approuvs par Garmin ne dpassent pas les limites fixes par la rglementation. Pour tre conforme aux exigences dexposition aux radiofrquences, lappareil doit tre install et utilis en respectant une distance minimale de 5 mm (0,2 po) entre lappareil et votre corps. Lappareil ne doit tre utilis dans aucune autre configuration. Lappareil ne doit tre utilis dans aucune autre configuration. Cet appareil ne doit pas tre plac ou utilis en conjonction avec dautres antennes ou metteurs. Pour connatre les valeurs DAS relles, rendez-vous sur le site www.garmin.com/compliance. 2013 Garmin Ltd. or its subsidiaries Printed in Taiwan September 2013 190-01678-02_0A SAR_5mm.indd 1 9/30/2013 11:16:30 AM

Page 1 of 1 Request for Confidentiality Date: August 9, 2021 Subject: Confidentiality Request for: Garmin International, Inc. FCC ID: IPH-0282320 Pursuant to FCC 47 CFR 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Not Provided Block Diagrams Short Term Not Provided External Photos Short Term Permanent Not Provided Internal Photos Short Term Permanent Not Provided Operation Description/Theory of Operation Short Term Permanent Not Provided Parts List & Placement/BOM Short Term Permanent Not Provided Tune-Up Procedure Short Term Permanent Not Provided Schematics Short Term Not Provided Test Setup Photos Short Term Permanent Not Provided Users Manual The above-mentioned company has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality (if applicable): The applicant requests the exhibits selected above as short term confidential be withheld from public view until May 8, 2020. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered Provided to IC applications Sincerely, By: __________________________ Nic Johnson, Technical Manager, NCEE Labs

July 14, 2021 Federal Communications Commission Equip Approval Services Post Office Box 358315 Pittsburgh, Pennsylvania 15215-5315 To Whom It May Concern:

Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized Nic Johnson of the Nebraska Center for Excellence in Electronics to act on Garmins behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) for equipment FCC authorization. This authorization is limited to FCC ID: IPH-0282320. Consistent with the foregoing, Nic Johnson is authorized to:

1) Sign Form 731, 2) Sign letters of application, 3) Request confidentiality, and 4) Exchange data and information with the FCC, and authorized TCBs on behalf of Garmin. This authorization is not assignable to other beyond Nic Johnson. No party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C 862. We also declare that the information provided to the FCC is true and correct to the best of our knowledge

(47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This authorization expires July 14, 2022. Sincerely, Dan Irish Lead Compliance Engineer

-----------------------------------------------------nothing follows----------------------------------------------------

November 16, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 RE: Class II Permissive Change Request (C2PC) for FCC ID: IPH-0282320 Ref: KDB Pub. 388624 (C2PCPX Procedure) and FCC correspondence To Whom It May Concern:

Thank you for your response to the subject Knowledge Database (KDB) inquiry. According, a Class II Permissive Change is requested for FCC ID: IPH-0282320, where a portion of the MURS transmitter is proposed to change from one VHF transceiver IC and associated discrete components, to an IC by a different manufacturer which is not pin-for-pin compatible, along with different associated discrete components. The following evidence is provided to fulfill the nine conditions outlined in the KDB response, for consideration in the Pre-Approval Guidance (PAG) submittal and C2PC application:

1. Refer to the attached block diagram, T5_mini-TT15_mini_Block_Diagram.pdf. Only the block SiLabs Si4461_C is being replaced. The 26 MHz reference clock is unchanged, and the characteristics of the MURS transmitter are unchanged, including the fundamental frequencies, modulation (2GFSK), and maximum output power. 2. The form, functions and identification of the device have not changed since the original certification or any subsequent Permissive Changes; it still consists of a MURS transceiver, a 2.4 GHz transceiver

(DSSS), and a GNSS receiver, with no changes to the transmitter characteristics (fundamental frequencies, modulation, output power, and the like). 3. The Printed Circuit Board is the same size and outline, and the PCB changes are limited to a small area for the VHF transceiver. Refer to the old and new internal photographs, Mini_Internal_Photos.pdf and 011-03820-42_Internal_Photos_R2.pdf, respectively. 4. This C2PC will not add, remove, augment, or change capabilities, such as transmitters, increased bandwidth, additional rule parts, bands, etc. 5. The required test report R20210524-21-E1A-TNT.pdf and internal photographs (noted above) are provided for the PAG submission. The EUT contained other radios i.e. an ANT transceiver and a GNSS receiver, which were investigated. In particular, the output power was checked and found to be within permissible tolerances and the worst-case radiated spurious emissions were found to be below the limits. 6. We acknowledge that the modified product must not be marketed until C2PC certification is granted. 7. The subject product is not a Software Defined Radio (SDR). However, if it were, we acknowledge that if the C2PCPX procedure were applied, subsequent software changes could not be Class III Permissive Changes. 8. We further acknowledge that a rule change requiring a software change and a corresponding permissive change to add an equipment class would still be eligible, as specified in KDB Pub. 178919 section (V)

(E), Software Changes. 9. This is not a Class I Permissive Change (C1PC) application, which would disqualify use of the C2PCPX PAG item. Moreover, additional exhibits for this C2PC application are provided as appropriate, including test setup photos and schematic diagrams. Additionally, in response to correspondence from the FCC to American Certification Body, Inc., (ACB) on November 2, 2021, SAR testing was completed on this product on November 8-11, 2021, with passing results indicated in the test report SAR.20211108 and accompanying test setup photos. A duty cycle of 3% was applied to the VHF transmitter, which transmits for 75 milli-seconds every 2.5 seconds, worst-case. This is the highest duty cycle setting, set in software, and cannot be increased by the end user. Thank you for your consideration of this C2PC application for certification. Sincerely, Dan Irish Lead Compliance Engineer

Page 1 of 1 Request for Confidentiality Date: February 28, 2022 Subject: Confidentiality Request for: Garmin International, Inc. FCC ID: IPH-0282320 Pursuant to FCC 47 CFR 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Not Provided Block Diagrams Short Term Not Provided External Photos Short Term Permanent Not Provided Internal Photos Short Term Permanent Not Provided Operation Description/Theory of Operation Short Term Permanent Not Provided Parts List & Placement/BOM Short Term Permanent Not Provided Tune-Up Procedure Short Term Permanent Not Provided Schematics Short Term Not Provided Test Setup Photos Short Term Permanent Not Provided Users Manual The above-mentioned company has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality (if applicable): The applicant requests the exhibits selected above as short term confidential be withheld from public view for 180 days. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered Provided to IC applications Sincerely, By: __________________________ Nic Johnson, Technical Manager, NCEE Labs