FCC ID: IPH-00726 FRS/GMRS UHF Transceiver

130 2-way radio &

personal navigator a r y owners manual and reference guide P r e li m i n 190-00284-00_Prelim_FCC.indd a 9/18/2003, 3:50:25 PM Copyright 2003 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 E 151st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax. 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ U.K. Tel. 44/1794.519944 Fax.44/1794.519222 a r y a r y Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax. 886/2.2642.9099 P r e li m i n P r e li m i n All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copy-

right notice and provided further that any unauthorized commercial distribution of this manual is strictly prohibited. Information in this manual is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes. Visit the Garmin web site (www.Garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin, AutoLocate, Personal Navigator, and TracBack are registered trademarks, Rino, MapSource, BlueChart, and Click Stick are trademarks of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin. September 2003 Part Number 190-00284-00 Rev. A Printed in Taiwan 190-00284-00_Prelim_FCC.indd b 9/18/2003, 3:50:41 PM Introduction About This Manual /

Packing List a r y Thank you for choosing the Garmin Rino (Radio Inte-

grated with Navigation for the Outdoors). To get the most from your new Rino, take time to read through the Quick Start Guide rst, then this owners manual to understand all of the operating features. This Reference Manual describes the Main Pages of the Rino and their options in detail. The Quick Start Guide describes the process of navigating the Main Pages and the Option Menus, along with some basic unit operations to familiarize you with your new Rino right out of the box. While the Reference Manual provides some direction on how to select and change items, its main intention is to describe each Main Page and its Option Menu in detail. This manual is organized into three sections. The Main Pages section (listed in same order as The Introduction section provides FCC, safety, war-

ranty, product registration information, and the Table of Contents. viewed on screen) provides details about using the features of the Rino according to topic. The explanations for each feature in this section are divided into: (1) An overview that discusses the feature and how it functions and (2) A detailed Step-by-Step instruction for using the feature. The Appendices include Speci cations, Accesso-

P r e li m i n ries, Data Field De nitions, MapSource information, a Troubleshooting Guide, Wiring Diagram and a Time Offset Chart followed by the Index. Check to see that your package includes the following items. If any parts are missing, contact your Garmin dealer immediately. Standard Package Contents:

1 Rino Unit 1 Belt Clip 1 Wrist Strap 1 Owners Manual 1 Quick Start Guide 1 PC Interface Cable (Rino 130 Only) 190-00284-00_Prelim_FCC.indd i 9/18/2003, 3:50:42 PM i Introduction FCC Compliance

GMRS Licensing FCC Compliance The Rino 130 complies with Part 15 of the FCC regula-

tions and with Canadian ICES-003 for Class B digital devices. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interfer-

ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a par-

ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

a r y

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

Consult the dealer or an experienced radio/TV P r e li m i n technician for help. The Rino 130 does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modi ca-

tions could result in permanent damage to the equipment, and void your warranty and your authority to operate this device. FCC Licensing Information The Rino 130 two-way radio operates on General Mo-

bile Radio Service (GMRS) frequencies that are regulated by the Federal Communications Commission (FCC) in the United States. In order to transmit on these frequencies, you are required to obtain a license from the FCC. An individual 18 years of age or older, who is not a represen-

tative of a foreign government, is eligible to apply for a ii 190-00284-00_Prelim_FCC.indd ii 9/18/2003, 3:50:42 PM GMRS license. To apply for a GMRS license, you will need FCC Form 605 (605 Main Form and Schedule F) and FCC Form 159. You can download the application forms from the FCC web site at http://www.fcc.gov/Forms/. You can also request them through the FCC forms hotline at 1-800-418-FORM (1-800-418-3676). You can le Form 605 on-line at http://wireless.fcc.gov/uls/. There is a ling fee associated with this application, which may change from time to time. For information on fees, see the FCC fee information web page at http://wireless.fcc.gov/csinfo/

feeinfo.html. GMRS is not currently approved for use in Canada. For use in countries outside of the U.S., please check with that government for any restrictions of FRS or GMRS use. For questions concerning the license application, con-

The GPS system is operated by the United States tact the FCC at 1-888-CALL-FCC (1-888-225-5322) Warnings and Precautions government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. Although the Garmin Rino 130 is a precision electronic NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted and, therefore, become unsafe. P r e li m i n designed to facilitate the use of authorized government charts, not replace them. Only of cial government charts and notices to mariners contain all information needed for safe navigationand, as always, the user is responsible for their prudent use. The electronic chart is an aid to navigation and is Use the Rino 130 at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owners Manualand thoroughly practice operation using the Demo mode prior to actual use. When in actual use, carefully compare indications from the Rino 130 to all available navigation sources, including the information from other NAVAIDs, visual sightings, charts, etc. For safety, always resolve any discrepancies before continuing navigation. Introduction Warnings &

Precautions MAP DATA INFORMATION:

One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify (as required) in product literature and copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incomplete data to some a r y degree. This is particularly true outside the United States, where complete and accurate digital data is either not available or prohibitively expensive.

CAUTION: IT IS THE USERS RESPONSIBILITY TO USE THIS PRODUCT PRU-

DENTLY. THIS PRODUCT IS INTENDED TO BE USED ONLY AS A NAVIGATIONAL AID AND MUST NOT BE USED FOR ANY PURPOSE REQUIRING PRECISE MEASUREMENT OF DIREC-

TION, DISTANCE, LOCA-

TION, OR TOPOGRAPHY. iii 190-00284-00_Prelim_FCC.indd iii 9/18/2003, 3:50:42 PM Introduction Warnings &

Precautions a r y Important: Read this information before using your Rino. Exposure to Radio Frequency Signals - Your wire-

less handheld radio is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.In August 1996, The Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless radios. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies: American National Standards Institute

(ANSI) IEEE. C95.1-1992; National Council on Radia-

tion Protection and Measurement (NCRP) Report 86;

International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. Those standards were based on comprehensive and periodic evaluations of the relevant scienti c literature. For example, over 130 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1).The design of your radio complies with the FCC guidelines

(and those standards). Antenna Care - Use only the supplied or an approved replacement antenna. Unauthorized antennas, modi ca-

tions, or attachments could damage the radio and may violate FCC regulations. Do not use any radio that has a damaged antenna, because if it comes into contact with your skin, a minor burn can result. Bectronic Devices - Most modern electronic equipment is shielded from RF signals. However, certain equipment may not be shielded against the RF signals from your wireless radio. Pacemakers - The Health Industry Manufacturers As-

sociation recommends that a minimum separation of six inches (6) be maintained between a handheld wireless radio and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemak-

ers should ALWAYS keep the radio more than six inches from their pacemaker when the radio is turned ON should P r e li m i n iv 190-00284-00_Prelim_FCC.indd iv 9/18/2003, 3:50:43 PM not carry the radio in a breast pocket should use the ear opposite the pacemaker to minimize the potential for interference should turn the radio OFF immediately if you have any reason to suspect that interference is taking place Hearing Aids - Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices - If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtain-

ing this information. Turn your radio OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external IRF energy. Vehicles - RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regard-

ing your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities - Turn your radio OFF in any facility where posted notices so require. Commercial Aircraft - Many commercial airlines prohibit the use of FRS radios on board. Switch OFF your radio before boarding an aircraft or check the airline rules. Blasting Areas - To avoid interfering with blasting opera-

tions, turn your radio OFF when in a blasting area or in areas posted: Turn off two-way radio. Obey all signs and instructions. Potentially Explosive Atmospheres - Turn your radio OFF and do not remove your battery when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your battery in such areas could cause an explosion or re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always clearly marked. They include fueling ares such as gasoline stations, below deck on boats, fuel or chemical transfer or storage facilities; vehicles using lique ed petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as h P r e li m i n d d h l 190-00284-00_Prelim_FCC.indd v d Introduction Warnings &

Precautions a r y v 9/18/2003, 3:50:43 PM Introduction This Garmin product is warranted to be free from defects in materials or workman-

LIMITED WARRANTY ship for one year from the date of purchase. Within this period, Garmin will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATU-

TORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL Garmin BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. Some states do not allow the exclusion of incidental or consequential dam-

ages, so the above limitations may not apply to you. a r y Garmin retains the exclusive right to repair or replace the unit or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction con rmations are not accepted for warranty veri cation. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction. P r e li m i n To obtain warranty service, contact your local Garmin authorized dealer. Or call Garmin Customer Service at one of the numbers shown below, for shipping instructions and an RMA tracking number. The unit should be securely packed with the tracking number clearly written on the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station. A copy of the original sales receipt is required as the proof of purchase for warranty repairs. Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, U.S.A Phone:

913/397.8200 USA Only: 800/800.1020 FAX:

913/397.0836 Garmin (Europe) Ltd. Unit 4, The Quadrangle, Abbey Park Industrial Estate Romsey, SO51 9AQ, U.K. Phone:

FAX:

44/1794.519944 44/1794.519222 The Garmin Rino 130 has no user-serviceable parts. Should you ever encounter a The Rino 130 is fastened shut with screws. Any attempt to open the case to change problem with your unit, please take it to an authorized Garmin dealer for repairs. vi or modify the unit in any way will void your warranty and may result in permanent damage to the equipment. 190-00284-00_Prelim_FCC.indd vi 9/18/2003, 3:50:44 PM Software License Agreement BY USING THE Rino 130, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin grants you a limited license to use the software embedded in this device (the Software) in binary execut-

able form in the normal operation of the product. Title, ownership rights and intellectual property rights in and to the Software remain in Garmin. You acknowledge that the Software is the property of Garmin and is protected under the United States of Ameri-

ca copyright laws and international copyright treaties. You further acknowledge that the structure, organization and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America. Customer Service Product Registration P r e li m i n connect to our web site (www.Garmin.com). Look for the Product Registration link on the Home page. Also, be sure to record your serial number in the area provided below. Help us better support you by completing our on-line Have the serial number of your Rino 130 handy and registration today!

NOTE: If you have previously registered a Garmin product purchase, we invite you to re-register using our NEW on-line system. Many services provided by our new product registration system are now being automated and re-registering your purchase ensures you the best possible support from Garmin.

Serial Number:

Introduction Software License Agreement &

Registration a r y

Why should you register your Garmin GPS unit:

Noti cation of New Products

Lost or Stolen unit tracking vii 190-00284-00_Prelim_FCC.indd vii 9/18/2003, 3:50:44 PM Table of Contents Introduction About This Manual.............................................i FCC Compliance Statement...............................ii FCC Licensing for GMRS...............................ii-iii Warnings and Precautions.............................iii-v Warranty...........................................................vi Software License Agreement.............................vii Product Registation..........................................vii Table of Contents............................................viii The Main Pages Unit Overview ....................................................1 Radio Page The Main Page..................................................2 Status Bar....................................................3 My ID......................................................3-4 Channels and Codes................................4-5 Scan and Montior....................................5-6 Setup Radio.............................................7-8 Informational Picture.............................9-10 Peer-to-Peer..........................................11-13 Map Page The Main Page..................................................14 Zooming In/Out......................................15 Map Page Options...................................16 Panning the Map ..................................17 Stop Navigation......................................18 Show........................................................18 Data Fields..............................................18 Map Page Setup..................................19-20 Measure Distance....................................20 Navigation Page The Main Page..................................................21 Navigation Page Options...................22-23 Data Fields..............................................23 Trip Computer Page The Main Page.............................................24-25 Main Menu Page The Main Page..................................................26 Using the Main Menu............................27 Marking Your Location as a Waypoint......28 Creating a Waypoint.................................29 Projecting a Waypoint..............................30 Editing Waypoints...................................30 viii P r e li m i n a r y Saving as a Waypoint............................31 The Find N Go Menu.............................31-37 Finding a Waypoint...............................32 Finding a Contact..................................32 Finding a City..........................................33 Finding an Exit................................33-34 Finding a Point of Interest................34-35 Finding an Address or Intersection...35-36 Finding a Last Found Place..................37 Using a Goto................................................38 Routes Page.............................................39-44 Creating and Using A Route..................39 Editing a Route................................40-42 Add/Edit from the Route Map Page.42-43 Navigating a Route............................43-44 Tracks Page..............................................45-46 Proximity Page..............................................47 Satellite Page............................................48-50 Setup Pages..............................................51-56 Time Page...............................................51 Units Page..........................................52-53 Display Page............................................54 Heading Page..........................................54 Interface Page.........................................55 System Page.............................................56 Calendar Page..............................................57 Alarm Clock Page.........................................58 Calculator Page.............................................58 Stopwatch Page............................................59 Sun and Moon Page.....................................60 Hunt and Fish Page......................................60 Area Calculation Page...................................61 Games Page..............................................62-63 Appendices Appendix A: What is FRS?....................................64 Appendix B: Speci cations..................................66 Appendix C: Accessories......................................67 Appendix D: MapSource Setup...........................68 Appendix E: Troubleshooting.........................69-70 Appendix F: Data Field De nitions..................71-72 Appendix G: Wiring Diagram..............................73 Appendix H: Frequency Chart.............................74 Index............................................................75-76 190-00284-00_Prelim_FCC.indd viii 9/18/2003, 3:50:45 PM Main Pages Features a r y Rino 130 - Overview The Rino 130 (Radios Integrated with Navigation for the Outdoors) is a 7.6 ounce, 12 channel GPS-enabled handheld device with integrate radio functionality to pro-

vide two-way communications for up to two miles using 14 FRS (Family Radio Service) and 8 high-performance GMRS (General Mobile Radio Service) channels for up to ve miles. You can keep track of up to 50 other contacts from other Rino users. The Rino 130 has seven keys located on the unit that allow the user to quickly access all of the units functions. The Rino 130 has a 160 X 160 pixel, 4 level gray mono-

chrome display for easy viewing. The Rino can store up to 500 waypoints with a 10-

Built-in cartography of a North American base map character name and graphic symbol. The active track log will store up to 3000 points and allow you to save up to 20 tracks with 250 points per track. P r e li m i n that includes Interstate and State Highways and Exit Information. Using MapSource, Garmins map data software (not included), you could choose to have the Rino 130 display up to 8MB of a variety of different map information. We currently offer several mapping options that are compatible with the Rino 130 includ-

ing our MetroGuide, Topo, Fishing Hot Spots, and BlueChart data. Check your local dealer or our web site

(www.Garmin.com) for a complete listing of MapSource products. Garmin designed your Rino 130 with the user in mind. The Rino 130 is waterproof to IPX7 standards and is rugged enough to endure the most trying use, and Garmins friendly user interface will allow you to start navigating with your new GPS in no time. Your Rino 130 can provide one more critical bene t, peace of mind. With your Rino 130 you will know where you are, where youve been and where youre going. And since youll always know the way back home, you can concentrate on what you set out to do, explore the great outdoors. 190-00284-00_Prelim_FCC.indd 1 9/18/2003, 3:50:45 PM 1 Radio Page The Main Page Radio Page - Overview The Radio Page is the rst of the default Main Pages. This page provides the user interface for FRS (Family Radio Service) and GMRS (General Mobile Radio Service) radio operations. Use this page to control and setup the radio, view current settings and see informational graphics of the radios operation. Radio Page The My ID eld allows you to customize a name and chose a symbol that will appear on other Rino units as you communicate with them. a r y The Rino has a total of 22 channels and 38 squelch codes to select from using the Channel and Code elds. Channels 1-14 are for FRS and 15-22 are for GMRS. GMRS

(disabled by default) frequencies are regulated by the FCC

(Federal Communications Commission). In order to trans-

mit on these frequencies, you are required to obtain a license from the FCC (see pg. ii-iii). The Scan option allows you to scan through the channels for voice activity. The Monitor option lets you monitor a single channel for any activity, including static and weak voice signals. You might choose this option if a signal is getting out of range or weak. The Informational Picture on the bottom half of screen features Garmins Mr. Mark Waypoint to show current GPS

& radio status (see pg. 9) and radio actions. As you operate the unit, the graphics will change depending on what ac-

tions you are taking or unit settings. P r e li m i n The Status Bar at the top of the page will show icons for current radio settings and operation. The Options Menu, on the right side of the Status Bar, has settings for Setting up the radio, de ning a scanlist, and turning the GPS or radio On/

Off. The Main Page Menu, on the far right side of the Status Bar, allows you to jump to any of the available Main Pages. The Rino buttons (Except the TALK key) may be key-

Hold PAGE to release the keylock. locked in order to avoid unwanted keypresses. To lock/unlock the keys :

1. Press IN and hold the CLICK STICK to access the Shortcut Menu, then highlight Enable Keylock and press IN. To unlock, press and hold the PAGE key until Keylock Disabled is displayed (about 5 seconds) 2 190-00284-00_Prelim_FCC.indd 2 9/18/2003, 3:50:46 PM Status Bar - Overview The Status Bar at the top of the screen will display on all the available Main Pages. As you move around any Main Page or change pages, the current pages title will brie y display for 3 seconds then be replaced by the Status Bar. You will see current settings and operational icons on the Status Bar as you operate the unit. The avail-

able icons are:

Battery Full (Each bar represents 1/4 charge) Battery 1/2 charge Battery Empty Using External Power Receiving Radio Transmission Transmitting Radio Transmission Backlight On Radio On Peer-To-Peer On/Location Ready to Send P r e li m i n GPS On and Position Ready GPS On, Position Not Ready Keylock On Alarm Clock On My ID and Symbol Fields - Overview The My ID eld allows you to enter a name and symbol that will appear on other Rino units as you com-

municate with them. You may enter a name using up to a combination of 10 letters, numbers or spaces. The Symbol eld allows you to choose a face icon from a list to further personalize your ID. To enter a name:

1. Using the CLICK STICK, highlight the My ID eld and then press the CLICK STICK key IN. This will activate the eld and display the keyboard. Radio Page Status Bar a r y Status Bar My ID Field Symbol 3 190-00284-00_Prelim_FCC.indd 3 9/18/2003, 3:50:47 PM Radio Page My ID /

Channels & Codes Changing the user symbol 2. Move the CLICK STICK Up, Down, Left or Right to highlight the Clear eld, then press IN on the CLICK STICK to clear the default Name ID. 3. To enter a new ID, press the CLICK STICK Up, Down, Left or Right to move the cursor to the desired letter, number or a space, then press IN on the CLICK STICK to select that highlighted character. You may enter up to 10 characters for your ID. You will also see a highlight cursor in the My ID eld showing your current entry position in that eld. Choosing Back will delete the character to the left of the cursor. Use the left or right arrow symbols to move the highlight in the ID eld. a r y 4. When you have entered your new ID, use the CLICK STICK to highlight OK and then press IN on the CLICK STICK. Changing the user symbol:

1. Using the CLICK STICK, highlight the face symbol to the right of the My ID eld and then press the CLICK STICK key IN. This will show a list of available face icons. 2. Move the CLICK STICK Up or Down to scroll through the selections. Since not all the selections can t in the window, you will see a slider bar on the right side indicating your current position in the list. 3. Once you have highlighted the desired icon, press IN P r e li m i n Channel and Code - Overview on the CLICK STICK. The Rino has a total of 22 channels and 38 squelch codes to select from using the Channel and Code elds. Channels 1-14 are for FRS and 15-22 are for GMRS

(disabled by default). To communicate with other Rino and FRS/GMRS users, you must be on the same Channel and Code. Garmin Rino units will work with 3rd party FRS/GMRS radios, provided the other radios use standard FRS/GMRS frequencies. A chart of the Rino frequencies may be found in Appendix H. Select from FRS channels 1-14 or GMRS 15-22. Squelch codes allow you to hear calls from only speci c persons. Thirty-eight Squelch Codes (called Continuous Tone Controlled Squelch System or CTCSS) allows your Rino to ignore unwanted calls from other persons who are 4 190-00284-00_Prelim_FCC.indd 4 9/18/2003, 3:50:47 PM Radio Page Channels & Codes

/ Scan & Monitor a r y Choose from 38 squelch codes. Setting the unit to zero will allow you to hear all transmissions on that channel, but you must be on the same code to radio back. using the same channel. Simply select the same squelch code (number) as selected by the other person(s) you desire to communicate with. NOTE: Squelch codes do not cause your conversation to be private. They only allow you to lter out other users on the same chan-

nel, so you only hear the radios you want to. Squelch Codes are not a scrambling system! Setting the code to 0

(squelch code off) will allow you to hear all activity on the selected channel, but you must be set to the same code as the other person(s) to transmit back. See Appendix H for a table listing all of the 38 Squelch Codes and their frequencies. As you change the main channels, the Rino will and its operational aspects. See Appendix A for more information on FRS/GMRS remember the last channel/squelch code combination that you were using. For example, you may set the unit to Channel 5, squelch code 21, then change the main channel to 8 and that code to 2. If you change the chan-

nel back to 5, the squelch code will change back to its previous setting of 21. P r e li m i n To change the Channel and/or Code:

1. Using the CLICK STICK, highlight the Channel or Code eld and then press the CLICK STICK key IN. This will show a list of available channels/

codes. 2. Move the CLICK STICK Up or Down to scroll through the selections. Since not all the selections can t in the window, you will see a slider bar on the right side indicating your current position in the list. 3. Once you have highlighted the desired selection, press IN on the CLICK STICK. Scan and Monitor - Overview The Scan option allows you to scan through the available channels for voice activity. As the unit scans and receives a signal (or if you transmit), it will stop on that channel/code for a few seconds, then continue scan-

ning. You may also use the Set Scanlist option to pick which channels/codes to scan. Since it can take time to The Code eld will go blank when the unit is scanning channels. 5 190-00284-00_Prelim_FCC.indd 5 9/18/2003, 3:50:48 PM Radio Page Scan & Monitor scan through the all the channels, selecting only speci c channels/codes will decrease the scan time. Decreasing scan time will help prevent the chances of missing a transmis-

sion. The Scanlist also has Option Menu choices to Scan Current Codes or Scan All Codes. Choosing Scan Current Codes will scan only the Channel and Code combination in memory The Monitor option lets you listen to a single channel The Code eld will go blank when you monitor a channel. for any activity, including static and weak voice signals. The Rino series will automatically squelch a frequency to lter out unwanted noise. Using the Monitor option will temporarily turn off the automatic squelch allowing you to hear the open channel. If you see a broken transmission symbol (see pg. 9), you may be receiving a signal too weak to trigger the units squelch. You might choose this option if a signal is getting out of range or weak. a r y To Scan or Monitor a channel(s):

1. Using the CLICK STICK, highlight the Scan or Monitor button and then press the CLICK STICK key IN. Scan will start searching through the available channels. Monitor will open the channel in order to listen to any radio transmissions on that channel. 2. To stop using either option, highlight the button with the CLICK STICK and press IN. P r e li m i n To Setup a Scanlist:

1. Using the CLICK STICK, highlight the Options Menu on-screen button and press IN. Highlight Setup Scanlist and press IN on the CLICK STICK. 2. To add/remove a channel from the list, highlight the channel and press IN on the CLICK STICK to add/remove the check mark in from of the name. Only channels that are checked will be scanned. 3. To Select/Clear All channels, highlight either the Select All or Clear All buttons and press IN on the CLICK STICK. 4. To Scan All Codes or Scan Current Codes, highlight the Options Menu and press IN on the CLICK STICK. Choose the desired setting and press IN on the CLICK STICK. 6 190-00284-00_Prelim_FCC.indd 6 9/18/2003, 3:50:49 PM The Radio Page Options Menu provides the following:

Setup Radio, Setup Scanlist, Turn Radio Off/On and Turn GPS Off/On. To access the page Options Menu:

1. Highlight the Option Menu on-screen button at the top of the display screen and then press IN on the CLICK STICK to open the menu. 2. Highlight the desired option on the menu and then press IN on the CLICK STICK to activate the option. 3. To close without making a selection, move the CLICK STICK to the right. Setup Radio - Overview The Setup Radio option displays the Radio Setup The following options are available:

Page. This page determines how the radio will function, changes audible alerts and enables you to adjust the radio operation to your needs. Setup Radio - Options P r e li m i n Call Tone - When the CALL button is pressed, an atten-

tion tone is transmitted. This option allows you to choose from one of ten tones. Roger Tone - When the TALK key is released, a tone is sent to signify the end of the transmission. This option allows you to choose from one of four tones, or set the tone to Off. Ring Tone - When an incoming transmission is received, an attention tone will sound. This option allows you to choose from one of ten codes, or set the tone to Off. The Ring tone will not sound again until there has been 45 seconds of radio inactivity. Vibrate - Choose from On or Off to have the unit vibrate when an incoming transmission is received. Once received, the unit will not vibrate again until there has been 45 seconds of radio inactivity. Headset Type - Allows you to choose which accessory headset or microphone you are using with the unit, or have the unit automatically detect the type. If using more than one type of headset or microphone, you will need Radio Page Setup Radio a r y Radio Page Options Menu If the headset has a PTT

(Push To Talk) button, this must be pressed in order for the unit to detect the headset. Radio Setup Page 7 190-00284-00_Prelim_FCC.indd 7 9/18/2003, 3:50:50 PM Radio Page Setup Radio Selecting a Ring Tone. Tone will sound when you press IN to accept it. to set the unit to Ask When Detected before changing accessories. VOX Level - Controls the sensitivity level of any Voice Operated Transmission (VOX) accessory. VOX accessories allow you to use the unit hands-free. A lower VOX setting is recommended for quiet environments while a higher VOX setting should be used in noisy environments. Setting the VOX level to 5 is recommended for most environments, but it may be necessary to adjust the level to achieve the desired voice trigger level. You will hear yourself talking in the headset when transmitting success-

fully using VOX. Send Location - This option enables/disables the peer-

to-peer positioning feature. See page 11 for more on this feature. GMRS Radio - Use this option to turn On/Off GMRS channels 15-22. Peer-to-peer transmissions are not avail-

able on GMRS channels. See page 2 for more information on using GMRS channels. Scramble - This feature adds a level of security to your conversations with other Rino 130 users only. When On, the voice transmission will sound garbled to other non-

scrambled Rinos, as well as other 3rd party radios. When set to On, in order for peer-to-peer and Send Location

(see pg. 11) features to work, the receiving radio must also have Scramble enabled. a r y To use Setup Radio options:

1. Select Setup Radio from the Options Menu and then press IN on the CLICK STICK to display the Map Setup Page. P r e li m i n 2. Highlight an option on the page and press IN on the CLICK STICK to display the options list for that feature. 3. Use the CLICK STICK to highlight the desired selection and then press it IN to activate. 4. Press the PAGE button or the on-screen X button to return to the Radio Page. You must obtain a license to operate on GMRS channels 15-22. 8 190-00284-00_Prelim_FCC.indd 8 9/18/2003, 3:50:50 PM Radio Page Informational Picture a r y Informational Picture Mark Waypoint Informational Picture - Overview The Informational Picture on the bottom half of screen features Garmins Mr. Mark Waypoint to show current GPS & radio status and radio actions. As you operate the unit, the graphics will change depending on what actions you are taking or the unit settings. Four satellites are shown on at the top of the picture along with descriptive text to indicate GPS reception status. As the unit collects satellite information, the satel-

lite symbols will ash alternately until all four are steady indicating a 3D position x. The more satellites that are steady, the better your position x. The Mark Waypoint gure will display several dif-

As radio signals come in, signal wave symbols will display to the left of Mark Waypoint. Fragmented (or broken) signal symbols are shown to indicate activity on that channel. Audio remains muted because the incoming signal does not match the squelch code your unit is set to. ferent icons, depending on what you are doing. A radio in Marks hand indicates the radio is ready to use. A ag in his other hand means the unit is ready to transmit its position (GPS must be On to use this feature.) As you transmit, you will see radio waves around Marks radio. When your peer-to-peer transmission is sent, Mark will raise the ag in his hand. As positions are received, a ag will brie y appear on top of the hill to the left. P r e li m i n See the following illustrations for more information:

GPS and Radio On;

Ready to transmit Position GPS and Radio On;

Ready to transmit Position;

Transmitting on FRS 190-00284-00_Prelim_FCC.indd 9 9/18/2003, 3:50:51 PM 9 Radio Page Informational Picture GPS and Radio On;

Position not ready;

Transmitting on GMRS GPS and Radio On;

Position transmitted GPS and Radio On;

Ready to transmit Position;

Receiving transmission GPS and Radio On;

Ready to transmit Position;

Activity on channel that does not match code. P r e li m i n GPS and Radio On;

Ready to transmit Position;

Position received from other Rino user GPS Off; Radio On;

Position sending not available a r y GPS On and Radio Off;

GPS operation only 10 190-00284-00_Prelim_FCC.indd 10 9/18/2003, 3:50:52 PM Radio Page Peer-to-Peer /

Contacts a r y Name &

Symbol Contact Information Field New Contact Page Peer-to-Peer - Overview The Rinos most unique feature is being able to send its location to another Rino, this is called Peer-to-Peer po-

sitioning. With peer-to-peer enabled (see pg. 8) and you have a GPS position (see pg. 48), whenever you press and release either the CALL key or the TALK key, the Rino will automatically send out its location. This information will be available to all other Rino users that are monitor-

ing the same channel and code. This feature allows you to track the movement of other Rino users and even navigate to their location. Locations may only be sent once every 10 seconds, due to FCC restrictions. To transmit your location to other Rino users:

New Contact Page - Overview 1. With Send Location enabled (see pg. 8), press and release either the TALK or CALL buttons. You will see a ag on the top Status Bar or in Marks hand when the unit is ready to transmit its position. P r e li m i n The rst time that a signal is received from another Rino user, a New Contact page will be displayed. From the New Contact page you can show their location on your map, Goto their location, or select OK to add them to your contact list. The Rino can manage up to 50 contacts at any time. Each time that you receive a signal from a contact, your map will be updated showing their new position and a Track Log of their movement will be created and shown on your map (see pg. 45). After a contact has been established, a <contact name> Updated message will brie y appear at the bottom of your display each time the contact updates. You may also review each contacts information such as Direction, Elevation, Time-

stamp, Location and enter Notes up to 30 characters. All contacts are listed on a Contact List Page and also displayed in the Contact Bar on the Map Page (see pg. 14). Contacts behave like and count towards the 500 maximum waypoint total. 190-00284-00_Prelim_FCC.indd 11 9/18/2003, 3:50:53 PM 11 Radio Page Contacts To accept a new contact:

1. When a new contact is received, the New Contact page will appear. Highlight OK and press IN on the CLICK STICK. If you do not OK the contact, it will not be saved. To review a contact and contact details:

1. From the Map Page, highlight the desired contact of Move LEFT or RIGHT on the CLICK STICK to view different contact data. Contact Bar the Contact Bar and press IN on the CLICK STICK. As you highlight the contacts on the Contact Bar, the Map page will center the map on that contact and display its name, direction and distance near the top of the screen. or 2. Press the CLICK STICK IN and hold it until the Shortcuts Menu is displayed. a r y 3. Highlight Find N Go and press the CLICK STICK IN. 6. P r e li m i n 4. Highlight Contacts and press the CLICK STICK IN. 5. From the Contacts List, select the desired contact and press the CLICK STICK IN. If the contact did not have a GPS location on the last transmission, a ? mark will appear below the ag. To view the contact details, highlight the details eld and press LEFT or RIGHT on the CLICK STICK to change to the next data eld. To change contact details:

1. The Elevation, Position and Note elds may all be manually edited. Select the desired eld and press IN on the CLICK STICK. For Notes, highlight Edit and press IN to start entering data, up to 30 characters. For other elds, highlight the eld and press IN on the CLICK STICK to start changing the data. Highlight OK and press IN when done. Contacts will also show on the Map Page. Highlight the contact and the map will center on their last position. To view a contact on the Map Page:

1. From the Contact Review Page, highlight Map and press IN on the CLICK STICK. Press PAGE when done to return to the Contact Review Page. 12 190-00284-00_Prelim_FCC.indd 12 9/18/2003, 3:50:53 PM Send Location - Overview Another feature is the ability to send a speci c location to other Rino users. This can come in handy if you are trying to round-up the group, or just want to meet at a speci c location. You may send any point found from the Find N Go menu. If the unit needs to wait until 10 seconds have elapsed since the last position transmission, a Waiting to send location... message will appear until the unit is able to transmit. If a location is sent more than once, a number will automatically be added to the end of the name (CAMP, CAMP 1, CAMP 2, etc.). To send a location:

1. Press the CLICK STICK IN and hold it until the Shortcuts Menu is displayed. STICK IN. 2. Highlight Find N Go and press the CLICK 3. Highlight the desired category and press the CLICK STICK IN. ( For the Contacts List, select the desired contact and press the CLICK STICK IN.) 4. Depending on which category you select, highlight the desired item and press IN on the CLICK STICK to display the Information page for that item. P r e li m i n 6. Highlight Send Location and press IN again. The unit will now send the point to the other Rino users on your channel/code. If using the Scramble feature, receiving radios must also have Scramble enabled. 5. From the Information Page, highlight the Options Menu in the upper right and press IN on the CLICK STICK. Radio Page Send Location a r y To send a location, high-

light the Options Menu from the Waypoint Review Page and press IN. Choose Send Location and press IN. 13 190-00284-00_Prelim_FCC.indd 13 9/18/2003, 3:50:54 PM Map Page Main Page Status Bar Option Menu & Main Page Menu Buttons Map Scale Map Page with Data Fields Position Icon a r y The Map Page displays your present position and direction of movement using a triangular Position Icon that is centered on the map. As you travel the map display leaves a trail (track log) of your movements. The map also displays geographic details such as rivers, lakes, highways, and towns. The map shown above displays a higher level of detail than the basemap provided with the unit (i.e. residential streets, parks, etc.), because Garmin MapSource data has been downloaded to the unit using a CD-ROM mapping program. P r e li m i n On the right side of the Map Page, you can choose to show either the Contact Bar (see also pg. 12), Data Fields or show the Map Only. As you highlight the contacts on the Contact Bar, the Map page will center the map on that contact and display its name, direction and distance near the top of the screen. To view a Contact from the Map Page:

1. Highlight the Contact Icon using the CLICK STICK. Press IN if you want to view the details of the Contact. 2. Press to the LEFT or RIGHT on the CLICK STICK in order to recenter the map on your current position. Map Page with Contact Bar 14 190-00284-00_Prelim_FCC.indd 14 9/18/2003, 3:50:55 PM To allow you to view the map from different perspec-

tives, the scale can be changed from 20 feet to 500 miles. The CLICK STICK and Z (Zoom) button on the front right of the unit allow you to zoom in or out on the map. Pressing the Z (Zoom) button from any page (other than the Map Page) will automatically take you to the Map Page. A lower zoom scale displays less area but more map detail, while a higher zoom scale shows you a larger area with less map detail. To change scales on the Map Page:

1. Use the CLICK STICK and Z (Zoom) button to change the map scale in order to show more map area with less detail or less map area with more detail. 2. Press and hold UP or DOWN on the CLICK STICK to zoom the map scale rapidly. The map scale in the lower left hand side of the display is shown in units of measurement selected in the Units eld of the Unit Setup Page (not to be confused with the Map Setup Page). If you zoom in so far that the resolution of the map data is exceeded and the appear-

ance of the map is no longer accurate, the word, over-

zoom displays just below the map scale. P r e li m i n In many instances the map displays an Accuracy Circle surrounding the Position Icon. The Rino 130 uses both map resolution and GPS accuracy in de ning your location to a point within the circle. The smaller the circle, the more accurate your location. When using the Pan Map feature, a small outline arrow (Map Pointer) can be moved about the page to highlight and identify map items or to scroll the map to view areas not shown on the display screen. Four optional Data elds on the right side of the page can be programmed to provide a variety of travel and navigation information. More detailed map features as well as information about those features can be downloaded to the unit from a Garmin MapSource CD-ROM. When using MapSource data, the word mapsource displays below the map scale whenever you zoom in to view map details. Map Page Main Page Press UP to Zoom Out a r y Press DOWN to Zoom In Map Features Map Scales Accuracy Circle Panning Arrow

(Map Pointer) 15 190-00284-00_Prelim_FCC.indd 15 9/18/2003, 3:50:55 PM Map Page Options On-screen Map Page Options Menu button Map Page Options Menu with Pan Map selected. When no active navigation is being used Stop Naviga-

tion displays in gray.. Map Page options allow a variety of operating and custom features for your Rino 130. The Map Page options are:

Pan Map - Allows you to move the Panning Arrow

(Map Pointer) about on the map. Stop Navigation - Stops navigating to a destination. Show... - Allows you to choose to show either the Contact Bar (see also pg. 12), four programmable Data Fields or show the Map Only. As you highlight the contacts on the Contact Bar, the Map page will center the map on that contact and display its name, direction and distance near the top of the screen. Choosing either Contact Bar or Data Fields reduces the map area. Setup Map - Displays the Setup Map Pages, which al-

lows you to tailor the map to your requirements such as changing text size, map orientation, and map detail. Measure Distance - Displays the distance from one point on the map to another. Restore Defaults - Returns the Map Page to the original factory settings (defaults). To select a map page option:

1. Highlight the Option Menu on-screen button at the top of the display screen and then press IN on the CLICK STICK to open the menu. a r y 2. Highlight the desired option on the menu and then press IN on the CLICK STICK to activate the option. P r e li m i n 3. To close without making a selection, move the CLICK STICK to the left or right. The Show.. lets you choose the layout of the Map Page. 16 190-00284-00_Prelim_FCC.indd 16 9/18/2003, 3:50:56 PM Map Page Options Map Page with Panning Arrow a r y Highlighted Map Item Using the Pan Map Option The Map Page pan function allows you to display an arrow used to point at and identify items on the map, and to move the map in order to view areas beyond the current viewing area on the display. The map panning function is activated from the Op-

tions Menu on the Map Page. The CLICK STICK moves the panning arrow (also referred to as the map pointer) in the desired direction on the map page. If the arrow moves to the edge of the map display, the map also moves to reveal more area and a busy hourglass appears by the cursor while the data is drawn on the screen. Pressing the CLICK STICK marks the arrow location Whenever the panning arrow is placed on a map item, the name of that item is highlighted. This feature applies to waypoints, roads, lakes, rivers...nearly everything that is displayed. or displays the map item information page. An Options Menu allows you to: send the location of that item, project a waypoint from it, save it as a waypoint, set a proximity circle around it, add it to a route, or view the sun and moon phase or view hunt and sh information from it. On-screen buttons at the bottom of the page al-

low you to Goto the map item, display it on the map or to select OK and return to the Map Page. P r e li m i n IN on the CLICK STICK, then choosing Find N Go displays items with the panning arrow (map pointer) lo-

cation used as a reference point for nearest items instead of your current location. Press the PAGE button to return to the Main Map Page. When using the panning arrow, pressing and holding To nd details about or Goto a map item:

1. Use the CLICK STICK to move the panning arrow to the map item that you want to learn more about. 2. When the items name is highlighted, press IN the CLICK STICK to display the Information Page. 3. Use the CLICK STICK to highlight and press the Goto button on the page to navigate to the item. Map Item Information Page 17 190-00284-00_Prelim_FCC.indd 17 9/18/2003, 3:50:57 PM Map Page Options Stop Navigation The Stop Navigation option allows you to quit navigation of a Goto, Route or Track in progress. When there is no active navigation, the Stop Navigation option is grayed out and is non-functional. To stop navigation:

1. Select Stop Navigation and press IN on the CLICK STICK. Show... Stop Navigation Option The Show... option allows you to view either navigation data in a four eld window on the right side the page or the Contact Bar. When Map Only is chosen, more map area is displayed. To show Contact Bar, Data Fields or Map Only:

1. Select Show.. from the option list and then press IN on a r y 2. Choose the desired option and press IN on the Data Field Instructions CLICK STICK. the CLICK STICK. P r e li m i n When Show... Data Fields is selected, four optional Data Fields on the right side of the page can be programmed to provide a variety of travel and navigation information. A list of the choices can be found below. Not all data types will be available on every page. To program a data eld:

1. Use the CLICK STICK to highlight the data eld and then press IN to display the list of data options. 2. Highlight the desired option and then press IN on the CLICK STICK to change the data eld type. Changing Data Fields. 18 Bearing Course Current Destination Current Distance Current ETA Current ETE Elevation Final Destination Final Distance Final ETA Final ETE GPS Accuracy Heading Location (lat/lon) Location (selected) Maximum Speed Moving Avg. Speed Odometer Off Course Overall Avg. Speed Pointer Speed Sunrise Sunset Time of Day To Course Trip Odometer Trip Time - Moving Trip Time - Stopped Trip Time - Total Turn Velocity Made Good Vertical Speed 190-00284-00_Prelim_FCC.indd 18 9/18/2003, 3:50:58 PM The Setup Map option displays the ve Map Setup Pages, each accessed by an on-screen button. A list of options displays for the features listed. Scale options indicate the zoom level at which Tracks, Tracks Logs, Map Features, or Text Boxes display, allowing you to remove map clutter and de ne map features. Page - Orientation: Track Up or North Up; fixes the top of the map display to the current track heading or to a north heading. Auto Zoom: On or Off; automatically scales the map to display both your current location and the next point to which you are navigating. Detail: Most, More, Normal, Less, or Least; controls how much map detail you see. This setting only applies to a map feature set to Auto. Those features which have a specified scale or are turned Off are unaffected by this setting. Lock on Road: On or Off; available only if MapSource Data is loaded; when On the triangle icon locks to the road that you are traveling. Display Mode: Land or Water; choice displays in light color while the other displays in a dark color. P r e li m i n Tracks - Saved Tracks and Track Log: Scale options; Off, Auto, or 20 ft.-500 miles, sets the maximum scale at which the feature should appear on the screen. Some types of data will display only to certain zoom scales. Goto Line: Bearing or Course. Map Features - Points of Interest, Waypoints, Street Label, and Land Cover, Scale options; Off, Auto, or 20 ft.-500 miles, sets the maximum scale at which the feature should appear on the screen. Some types of data will display only to certain zoom scales. Text - Points of Interest, Waypoints, Street Label, and Land Cover, Text sizes; None, Small, Medium, or Large control the screen size of the name. MapSource Info - Show, Check box; check mark determines if map data is used or not. Options Menu allows you to choose to show all, show none or show specific MapSource Data. See also page 66.. Map Page Setup Options Page Setup a r y Tracks Setup Map Features Setup Text Setup Map Data Setup 19 190-00284-00_Prelim_FCC.indd 19 9/18/2003, 3:50:59 PM Map Page Setup Options If you have more than one type of MapSource data loaded, you can quickly choose to show one or the other. Map Pointer Field To use Setup Map options:

1. Select Setup Map from the Options Menu and then press IN on the CLICK STICK to display the Map Setup Page. 2. Press UP or DOWN on the CLICK STICK to highlight the desired sub-page button, which will display the options list for that sub-page to the left. 3. Press LEFT (Pressing RIGHT will return you to the sub-page buttons), then UP or DOWN on the CLICK STICK to highlight a feature on the list and press IN on the CLICK STICK to display the options list for that feature. Pressing RIGHT will return you to the sub-page buttons. 4. Use the CLICK STICK to highlight the desired option and then press it IN to activate. a r y to return to the Map Page. Measure Distance option 5. Press the PAGE button or the on-screen X button P r e li m i n To use the Measure Distance option:

1. Select Measure Distance from the Options Menu and then press IN on the CLICK STICK to display the Panning Arrow. You will see Ref under the arrow. 2. Use the CLICK STICK to move about on the Map Page until you reach the point to which you want to measure. A new Map Pointer eld displays showing the location of the pointer and the direction and distance from where you began the measuring. 3. To begin measuring from a different point, press IN on the CLICK STICK from the desired location. Measuring distance. 4. To stop measuring, press the PAGE key. 20 190-00284-00_Prelim_FCC.indd 20 9/18/2003, 3:51:00 PM Navigation Page The Main Page Straight Line Distance to the Destination Times to Destination Selectable Data Fields a r y Destination

(Waypoint) Name Bearing Pointer Compass Ring P r e li m i n The Navigation Page provides active guidance with a rotating compass ring that shows your course over ground (track) while youre moving and a bearing pointer to indicate the current direction to your destination (bearing) relative to the course over ground. The Compass Ring does not function as a magnetic compass when you are station-

ary. Although the bearing to a point will be correct, you must be moving in order for the compass functions to work properly. When you are moving, the heading is controlled by the GPS receiver. The Data Field the top of the page, by default shows you the name of your destina-

tion. All ve Data Fields can be programmed to display a variety of navigation data. The list of data eld choices may be found on page 18 and de nitions may be found in Appendix F. While you are navigating a route, the pointer indicates the direction (a bent arrow) of the turn to the next point in the route as well as the direction to the current point when you get within 15 seconds ETA of the current point. When you are not on an active Goto, Track or Route (in other words: not traveling to a recorded destination), the window at the top of the page will be blank when Desti-

nation is selected. The Compass Ring displays your heading while you are moving, but the data elds to the right of the page will not display any destination related data, such as Estimated Time of Arrival. 21 190-00284-00_Prelim_FCC.indd 21 9/18/2003, 3:51:00 PM Navigation Page The Main Pages CDI Scale Navigation Page with Course Pointer and Course Deviation Indicator

(CDI) Scale active. Navigation Page Options The options include:

Stop Navigation - Cancels navigation (Grayed out or disabled unless you are navigating on a Goto, Track, or Route.) Bearing Pointer/Course Pointer - Toggles between Bearing (always directed at destination) and Course

(distinctive with dots across center of compass, shows amount of correction needed to be back on course.) Change Scale - Only appears when Course Pointer is selected. Use the CLICK STICK to change the CDI scale. Scale value appears in the upper right area of the compass. a r y Show Data Fields/Big Compass - toggles to display data elds on the right side of the display or removing the data elds and showing a larger compass. Restore Defaults - Returns options and data eld choices to factory designations. To the right of the page are four data elds (and one on the top) that are user programmable with a choice of different data options. See page 18 for details on changing data elds. P r e li m i n The Bearing Pointer and Compass Ring work inde-

pendently of the direction of your movement and the direction to your destination. The Bearing Pointer always points directly to the destination, no matter what your current location might be. For example: if the arrow is pointing straight up, you are going directly to your destination. If it points any direction other than up, turn and move towards the direction the arrow is pointing until it points up and then continue in that direction. If you are using the Course Pointer option instead and you drift away from the original line of travel to your destination, the Course Deviation Indicator (CDI) provides graphic indication of drift (right or left) and displays the distance off course. Navigation Page with Bearing Pointer and Big Compass.. 22 190-00284-00_Prelim_FCC.indd 22 9/18/2003, 3:51:01 PM To Setup the Navigation Page:

1. With the Navigation Page displayed, use the CLICK STICK to highlight the Options Menu button at the top of the page. Then press it IN to display the menu. 2. Use the CLICK STICK to highlight your selection and then press IN to select it. To stop navigating:

1. Highlight the on-screen Options Menu button at the top of the Navigation or Map Page and press the CLICK STICK. 2. Select Stop Navigation, then press the CLICK STICK. on the CLICK STICK. The list of data eld choices may be found on page 18 and de nitions may be found in Appendix F. To change data elds:

1. Use the CLICK STICK to highlight the desired data eld and then press it IN to display the list of data options. 2. Select the desired option from the list and press IN P r e li m i n Navigation Page The Main Pages a r y Navigation Page Options Menu Navigation Page Changing Data Fields 23 190-00284-00_Prelim_FCC.indd 23 9/18/2003, 3:51:02 PM Trip Computer Page Main Page Selectable Data Fields a r y Trip Computer Page P r e li m i n The Trip Computer Page default displays up to seven different types of navigation data. Choosing Big Numbers will display 2 large data elds. Each data eld is selectable and can contain one of many data informa-

tion options. By selecting the information options that you prefer and arranging them in a desired order on the page, you can customize the Trip Computer Page to meet your navigation needs. The Options Menu allows you to reset the Trip Com-

puter data when you are ready to start a new trip, choose between Big or Small Numbers and Restore Defaults. Trip Page shown with Big Numbers 24 190-00284-00_Prelim_FCC.indd 24 9/18/2003, 3:51:02 PM Trip Computer Page Options a r y Data Field Options Menu Trip Computer Page The Trip Computer provides a variety of data elds with read-outs of current information as you travel. Seven small or two large elds display navigation information and are user programmable. The default set-

tings for these elds are shown in the illustration. The list of data eld choices may be found on page 18 and de nitions may be found in Appendix F. The Option Menu for this page provides the fol-

lowing options: Reset, Big Numbers, and Restore Defaults. To program a data eld:

1. Use the CLICK STICK to highlight the desired data and place it in the data eld. 3. Press IN on the CLICK STICK to select the option eld and then press it IN to open the data eld Options Menu. 2. Use the CLICK STICK to move Up or Down the menu to highlight a desired data option. To access the page Options Menu:

1. Use the CLICK STICK to highlight the Options Menu on-screen button and press it IN to display the Options Menu. P r e li m i n 3. To activate individual Reset options, highlight the item on the list and then press IN on the CLICK STICK to place or remove the check mark. 2. Highlight the desired option and then press IN on the CLICK STICK to activate. 4. Once you check all the desired items to clear, reset, or delete, highlight Apply and press IN on the CLICK STICK. You may also choose the Select All or Unselect All options accordingly.

NOTE: Use care when choosing the Delete options, as all stored Tracks, Waypoints, and Routes can be permanently deleted when reset-

ting the Trip Computer. Once deleted, items cannot be recovered. Reset Options Menu. Useful when starting a new trip to clear old data. 25 190-00284-00_Prelim_FCC.indd 25 9/18/2003, 3:51:03 PM Main Menu Page Main Page The Main Menu Page with Feature Icons

Time/Date. To exit these pages, highlight the on-screen X button and press IN on the CLICK STICK. The Main Menu provides you with a directory of the Rinos advanced features. From the Main Menu page you can mark and create new waypoints; nd map items such as cities, interstate exits, addresses, points of interest, etc.; create routes; save tracks; setup system operating features; access and use unit accessories or add/remove main pages and adjust their ordering. Main Menu Pages a r y P r e li m i n Page Sequence Setup You may add, remove, or reorder any of the Main Pages, plus additional pages. The default Main pages are Radio, Map, Navigation, Trip Computer, and Main Menu. The Main Menu cannot be removed from the page sequence. If a page is added to the Main Page Sequence, it will not appear in the Main Menu. To move, insert or remove a Main Page:

1. From the Main Menu, highlight the Option Menu on-screen button and press the CLICK STICK IN. Highlight Page Sequence Setup and press IN. 2. To move a page in the order, highlight the page and press IN. Select Move, then move UP or DOWN until the desired position is displayed and press IN. 3. To insert a new page, highlight the page you wish to insert it before and press IN. Select Insert, then choose a page from the list and press IN on the CLICK STICK. 4. To remove a page in the order, highlight the page and press IN. Select Remove and press IN on the CLICK STICK. 26 190-00284-00_Prelim_FCC.indd 26 9/18/2003, 3:51:04 PM Using the Main Menu The Main Menu provides access to additional Rino feature pages. The pages listed below provide enhance-

ments to Rino operation. Press the PAGE button repeat-

edly to cycle to the Main Menu or select it from the Main Page Menu at the top of each main page. Mark Waypoint Page - Allows you to mark and store a waypoint for your current location or a map pointer location. Find N Go Menu - Allows you to locate, and Goto, or use as part of a Route; Waypoints, Favorite Locations, Cities, Interstate Exits, Points of Interest, Addresses, and Intersections. (Some require MapSource data.) Route Page - Allows you to create and store routes for repeated use. Tracks Page - Provides access to the track log, saved tracks and contact tracks. Proximity Page - Allows you to set a proximity alert distance around contacts or waypoints. Satellite Page - Provides a picture of the satellite signal tracking and tells you when the unit is ready to navigate. Setup Page - Allows tailoring of items such as time for-

mat, units of measure, display backlighting timeout and contrast adjustment, heading selection, interface setups and system software information. Calendar Page - Provides you with a monthly calendar with programmable reference notes. Alarm Clock - Provides a settable 24-hour alarm clock. Calculator - The calculator feature is available in two forms, Standard or Scienti c. Stopwatch Page - Allows you to use the unit as a stop-

watch, including a lap timer. Sun & Moon Page -Shows a graphic display of both the sun and moon locations at various times, dates and locations. Hunt & Fish Page -Provides you with a listing of best times for hunting and shing for a chosen location. Area Calculation Page - Use this function to calculate area as you move around. Games Page - Games are provided as an entertainment feature. P r e li m i n Main Menu Page Options a r y Inserting a page in the Main Page Sequence. You may choose from a list of items to add to the Main Page Sequence. 27 190-00284-00_Prelim_FCC.indd 27 9/18/2003, 3:51:07 PM Main Menu Page Marking Waypoints The Mark (Waypoint) Page The Mark Waypoint Page allows you to mark and record your current location as a waypoint and appears with a graphic name block (man with a ag) that displays the assigned number for that waypoint and a waypoint symbol. To mark your current location as a Mark Waypoint Page Map Symbol List waypoint:

1. Press IN and hold the CLICK STICK to access the Shortcut Menu, then highlight Mark Waypoint and press IN. You can also access this page by highlighting the Mark Icon on the Main Menu Page and then pressing IN on the CLICK STICK. It is automatically assigned a 3-digit number. a r y 2. To change the name of the waypoint, use the CLICK STICK to highlight the waypoint name eld. 3. To assign an identifying symbol to a waypoint, use the CLICK STICK to highlight the symbol block just above the waypoint name. 4. To view the waypoint details, highlight the details eld and press LEFT or RIGHT on the CLICK STICK to change to the next data eld. 5. To save the waypoint, highlight OK and press IN on the CLICK STICK. If you do not want to save it as a new waypoint, press the PAGE button before pressing any other to cancel. P r e li m i n arrow:

6. To create a waypoint using the map panning 1. With the Pan Map feature active, move the panning arrow (map pointer) to the map item you want and highlight it. Marking a Waypoint with the Panning Arrow. 28 2. Press IN and release the CLICK STICK to display the item information page. 3. With the Information Page displayed, highlight the Options Menu button at the top of the page and then press the CLICK STICK to open the menu. 4. Highlight the Save As Waypoint option and press the CLICK STICK to save the map item as a waypoint. 190-00284-00_Prelim_FCC.indd 28 9/18/2003, 3:51:07 PM Main Menu Page Waypoints a r y Creating a Waypoint by entering coordinates. To create a waypoint using the panning arrow when a map item is not highlighted:

1. With the Pan Map feature active, move the panning arrow (map pointer) on the map to the location you want to mark and then, press the CLICK STICK. 2. The Mark Waypoint Page displays, automatically assigning a number to the waypoint. Be certain to press and release the CLICK STICK for this operation. Pressing IN and holding the CLICK STICK displayed the Shortcut Menu. To create a waypoint by manually entering its coordinates (lat/lon):

1. Press IN and hold the CLICK STICK to access the 3. You may also change the waypoint name and/or Shortcut Menu, then highlight Mark Waypoint and press IN or use the Find N Go to view a previous waypoint. 2. Highlight the details eld and press LEFT or RIGHT on the CLICK STICK to change to the Location eld. Press IN and enter the new coordinates using the numerical keyboard. Highlight and press OK when nished. P r e li m i n To move a waypoint by dragging it:

1. Use the Find N Go Menu to display the Waypoint 2. Highlight and press the Map on-screen button to 3. With the waypoint highlighted by the panning Page for the waypoint you want to move. display the map for the waypoint. arrow, press IN and release the CLICK STICK. The word Move displays beneath the panning arrow. symbol or add notes. 4. Use the panning arrow to drag the waypoint to the new location and then press IN on the CLICK STICK to place it. 5. Press the PAGE button before pressing the CLICK STICK to cancel moving of the waypoint and return to the Main Pages. 190-00284-00_Prelim_FCC.indd 29 9/18/2003, 3:51:08 PM 29 Main Menu Page Waypoints Projecting a Waypoint Projecting a waypoint from any map item (another waypoint, etc.) allows you to establish a new waypoint on a bearing and distance projected from that map item. Enter Distance and Bearing to project. To project a waypoint:

1. Select a map item from the Find N Go Menu. 2. Highlight the Option Menu on-screen button at the top of the Information Page and press the CLICK STICK IN to display the options. Highlight Project Waypoint and press IN. 3. Highlight either the bearing or distance eld, then press the CLICK STICK IN to display the numerical keyboard. Move from numeral to numeral pressing the CLICK STICK to enter numbers, then highlight OK and press IN to nish. a r y A waypoint or contact can be edited to change the map symbol, name, coordinates, elevation or add notes. It can also be deleted. Editing a Waypoint P r e li m i n To edit a waypoint:

1. Use the Find N Go Menu to display the waypoint/

contact or highlight it on the Map Page and press IN. 2. To view the details, highlight the details eld and press LEFT or RIGHT on the CLICK STICK to change to the next data eld. To make changes to the waypoint map symbol, name, location coordinates, elevation elds and notes, highlight the desired eld and press the CLICK STICK IN to display the keyboard. (For Notes, highlight Edit and press IN to start entering data, up to 30 characters.) Highlight the desired characters on the keyboard to enter new data and then select OK and press IN to close the keyboard. Using the keyboard to edit. 3. Highlight the OK button the press the CLICK STICK to save the changes. To delete a waypoint or contact:

1. Use the Find N Go feature to display the point. 2. From the Highlight the Delete button and then press the CLICK STICK. Con rm the deletion. 30 190-00284-00_Prelim_FCC.indd 30 9/18/2003, 3:51:09 PM To save Map or Find N Go Menu items as waypoints:

1. Access the Information Page for the desired item

(highlighted from the map or selected from the Find N Go Menu). 2. Open the Options Menu at the top of the page, select Save As Waypoint and press IN on the CLICK STICK to save the item to the Waypoints List. 3. Highlight the Save As Waypoint option and press Straight Down on the CLICK STICK. The Find N Go Menu The Find N Go Menu allows you to nd stored To access the Find N Go Menu:

1. Hold IN on the CLICK STICK button to access the locations (waypoints) and map items (cities, exits, etc.). They can be found by name or by those nearest to your current location (Position Icon). If you are using certain MapSource data, the list of nd locations is expanded to include categories for Points of Interest, Street Addresses and Intersections. If an option is grayed out (disabled), you will need to load map detail using MapSource to use that option. P r e li m i n For some categories, there are two methods of list-

ing. The By Name list contains every item in the map database for the selected category, while the Nearest list contains only those items that are near to your Current Location or the Map Pointer. Categories listed by either method displays a choose prompt. or 2. From the Main Menu, highlight Find N Go and Shortcut Menu. Highlight Find N Go press IN. press IN on the CLICK STICK. These pages are structured with a set of sub-menus and location information pages that guide you through the process of nding locations. Use them to construct a Route, establish a direct line of travel (Goto), or when gathering information. Main Menu Page Find N Go a r y Find N Go Menu Find Page using your current location as a point of reference Near Map Pointer or By Name Prompt displays when using Map Pointer Item Information Page 31 190-00284-00_Prelim_FCC.indd 31 9/18/2003, 3:51:10 PM Main Menu Page Finding Items Finding a Waypoint Waypoints that you have created and stored in the Rino can be found by selecting the Waypoint option from the Find N Go Menu. You can nd a waypoint from the list of waypoints using the By Name or Nearest options as ex-

plained on the previous page. When selected from the list, the waypoint displays on the Waypoint Information Page. The Waypoint Information Page displays the waypoint Waypoint Find List name or number, a map symbol, the location in lat/lon, elevation, distance, bearing, and three on-screen buttons for Goto, Map, and OK functions. a r y To nd a waypoint:

1. Use the CLICK STICK to select the Waypoint option from the Find List and then press it IN to display a prompt to select By Name or Nearest. Select, then press the CLICK STICK IN to display the Waypoints List. 2. Use the CLICK STICK to select the desired waypoint from the list and then press it IN to display the Information Page for that waypoint. 3. With the Information Page displayed, you can select Goto to create a direct line of travel to the waypoint. Select Map to view the waypoint location on the map or select OK to close the page. 4. Use the Options Menu to send the location, add it to an existing route, project a new waypoint from this location, view sun and moon, and best shing and hunting time information for this waypoint. P r e li m i n Finding a Contact Contacts that you have received in the Rino can be found by selecting the Contacts option. 1. Highlight Contacts and press the CLICK STICK IN. 2. From the Contacts List, select the desired contact and 3. press the CLICK STICK IN. If the contact did not have a GPS location on the last transmission, a ? mark will appear below the ag. To view the contact details, highlight the details eld and press LEFT or RIGHT on the CLICK STICK to change to the next data eld. Waypoint Information Page 32 190-00284-00_Prelim_FCC.indd 32 9/18/2003, 3:51:10 PM Main Menu Page Finding Items a r y Find List for Nearest Cities Finding a City Cities can be found by selecting the Cities option of the Find N Go Menu, selecting the city from the list of Nearest or By Name, and then displaying the City Information Page. The City Information Page for the selected city dis-

plays the city name, the size by population, and distance from your location. You can view it on the map or create a Goto direct route to the city from your current location, or from a location de ned by the Panning Arrow (Map Pointer). You can also save it as a waypoint, or add it to an existing route. To nd a city:

1. Use the CLICK STICK to select the Cities option, 2. then press it IN to display the nd By Name or nd by Nearest prompt. Selecting By Name displays the keyboard as an alternative scrolling through the list of nearest cities. If using nd By Name, begin spelling the name of the city by using the keyboard. When you have entered enough characters to de ne the name, a match list displays. If you are using nd By Nearest scroll through the list to nd the city you want. Use the CLICK STICK to select the desired city from the list and then press it IN to display the Information Page for that city. P r e li m i n Goto, Map, or OK options. 3. With the Information Page displayed, you can select You can use the Find Exit option to locate a nearby Finding an Exit exit on an interstate highway. Exits are listed only by Nearest. Exit information pages provide a variety of information about services near each exit, including rest stops, lodging, restaurants, service stations, etc. Some services (i.e. service stations) on this page can be selected and a separate information page displays with speci c information concerning what types of fuel, mechanical and food services are available. City Information Page 33 190-00284-00_Prelim_FCC.indd 33 9/18/2003, 3:51:11 PM Main Menu Page Finding Items List of Exit Types To nd an exit:

1. Use the CLICK STICK to highlight Exits and then press it IN to display the Exit List. 2. Highlight and select an exit type by pressing IN on the CLICK STICK. 3. A list of exits nearest to you displays. The title box indicates the interstate highway which is served by the exits. Two elds at the bottom of the page indicate distance and bearing to the exit. Exits List 4. Scroll through the list to highlight the desired exit. 5. Press IN on the CLICK STICK to display the Information Page for that exit. This page contains the exit description with a list of available services near that exit along with the distance and bearing elds. 6. Use the CLICK STICK to move to the list of services and highlight a selection from the list. a r y 7. Press IN on the CLICK STICK to display the Information Page for the selected service. The Exit Services Information Page displays the name of the service, its direction from the exit, and a list of the services available, each marked by a check. At the bottom of these Information Pages are on-

screen buttons for Goto, Map, and OK. 8. Use the Options Menu at the top of the page to save the exit as a waypoint, send the location, project a waypoint, or add to an existing route. P r e li m i n You can use the Find Point of Interest option to locate a nearby restaurant, lodging, landmark, public building, park, etc. However, you must have transferred a MapSource MetroGuide map to the unit map database. Otherwise, this option, plus Address and Intersection options, are grayed out and are not functional. Finding a Point of Interest Exit Information Page 34 Here is a list of Point of Interest categories:

Food & Drink Lodging Attractions Entertainment Manmade Places Shopping Services Transportation Emergency & Govt. 190-00284-00_Prelim_FCC.indd 34 9/18/2003, 3:51:12 PM In many instances, these categories are subdivided into types, such as in the instance of Food & Drink. When you select Food and Drink from the list of catego-

ries, you are then presented with a list of types which includes All Types and cuisine options such as American, Asian, Barbecue, Chinese and many more. Once you have selected an item, you can display the Information Page for that item. You can then use the on-

screen buttons to Goto or view the location on the Map;

or use the Options Menu for more choices. To nd a point of interest:

1. Use the CLICK STICK to highlight Points of Interest and then press it IN to display the Points of Interest Categories List. 2. Use the CLICK STICK to select the desired category 4. Use the Options Menu at the top of page to select 3. Use the CLICK STICK to select the desired type and and then press it IN to display the Types List. then press it IN to display the list for that type. from either By Name or Nearest options. Selecting By Name displays a keyboard allowing you to enter the characters of the name you want. A list of matches displays when enough characters are entered. P r e li m i n from the list and then press it IN to display the Information Page for that item. Map, or use the page Options Menu. 6. Use the on-screen buttons to Goto or view on the 5. Use the CLICK STICK to highlight your selection Finding an Address or Intersection You can enter a street number, choose a street name from a list and nd an address within the area of map data coverage or enter two street names and locate the intersection. To use these options, however, you must be using a MapSource MetroGuide which provides this type of map data. Main Menu Page Finding Items a r y Points of Interest List Food & Drink Categories Nearest Barbecue List 35 190-00284-00_Prelim_FCC.indd 35 9/18/2003, 3:51:13 PM Main Menu Page Finding Items To locate an address:

1. Use the CLICK STICK to highlight Address and press it IN to display the Find Address page. 2. Highlight the Number eld and use the keyboard for entering numbers. 3. Move to the Street eld using the CLICK STICK. 4. Press IN on the CLICK STICK to display the Select P r e li m i n Street Name list. Find the street by using the keyboard to enter characters until a list appears. 5. With the desired street highlighted, press IN on the CLICK STICK to place the street name on the Find Address page. Repeat this process for city and postal codes, if desired. A window at the bottom of the page displays a list of matches and the quality of each match. You may also use the Options Menu to Clear City, Clear Postal Code or Clear All. 6. Use the on-screen buttons at the bottom of the a r y page to Goto, view the item on the Map, OK to close, or use the Options Menu for other choices. To locate an intersection:

1. Display the Find N Go Menu and use the CLICK STICK to highlight the Intersection category and press it IN to display the Find Intersection page. 2. Highlight the rst Street eld and then press IN on the CLICK STICK to display the Street list. 3. Enter the name of the street in the name eld at the top of the list using the keyboard data entry method. Once you have spelled enough of the street name, you a match displays, often with several streets on the list. Press IN on the CLICK STICK to move the highlight to the street list and then scroll up or down until you nd the street name you want. Press it IN to place the name in the eld. 4. Highlight the best match and then press IN on the CLICK STICK to display the Information Page for the intersection. Use the on-screen buttons at the bottom of the page to Goto, view the item on the Map, OK to close, or use the Options Menu for other choices. Entering an Address Find Intersection Page 36 190-00284-00_Prelim_FCC.indd 36 9/18/2003, 3:51:14 PM Main Menu Page Finding Items a r y Last Found Places Page Finding a Last Found Place You can use the Recently Found Places option to locate Points of Interest, Cities, Waypoints or Contacts and Intersections and other locations you have recently retrieved. The process for nding recent points from the Find N Go list is the same as nding a regular waypoint. To nd a Last Found Place:

1. Use the CLICK STICK to select the Last Found Places option from the Find N Go List and then press it IN. 2. Press UP or DOWN on the CLICK STICK to highlight the desired sub-page button, which will display the options list for that sub-page (Points of Interest, Cities, Waypoints/Contacts or Intersections) to the left. 3. Press LEFT (Pressing RIGHT will return you to the 4. With the Information Page displayed, you can select sub-page buttons), then UP or DOWN on the CLICK STICK to highlight an item on the list and press IN on the CLICK STICK to display the Information Page for that item. P r e li m i n Goto to create a direct line of travel to the item. Select Map to view the waypoint location or select OK. For Waypoints and Contacts, you may also choose to Delete to permanently remove that item. 5. Use the page Options Menu to send the location of that point, project a new waypoint from its location, set a proximity circle, add the item to an existing route, or view sun/moon or hunt/ sh position data for this time and date. 190-00284-00_Prelim_FCC.indd 37 9/18/2003, 3:51:14 PM 37 Main Menu Page Using a Goto Using a Goto to Navigate to a Destination The Goto function allows you to create a direct route to a destination, (waypoint, city, or point of interest). Once you have accessed the Information Page for an item, use the Goto button at the bottom of the page to initiate travel to a map item using the Map and Navigation Pages for guidance. a r y To activate a Goto:

1. Use the Find N Go Menu to access the Information Page for any desired destination and use the CLICK STICK to highlight the Goto button. 2. Press IN on the CLICK STICK to start navigation. 3. Observe the Navigation Page, it displays the name of your destination, the distance from your current location, and a Bearing Pointer indicating the direction you should travel. The time required to reach your destination displays when you begin to travel and establish a predicted rate of movement. The Data Fields to the right of the page display information relative to your travel as appropriate for the type of data selected to appear in those elds. 4. Use the PAGE button or Main Page Menu to access the Map Page and observe your movements and a dark line indicating the direct path from your current location to your destination. 5. Use the Bearing Pointer on the Navigation Page to maintain travel in the right direction and observe distance and time information to monitor your progress. 6. When you are close to your destination, an Arriving at Destination message appears. If you move past the destination the Bearing Pointer reverses and the distance display increases. P r e li m i n Information Page Navigation Page To stop navigating:

1. Highlight the on-screen Options Menu button at the top of the Navigation or Map Page and press IN on the CLICK STICK. 2. Select Stop Navigation, then press IN on the A Map Page Goto CLICK STICK. 38 190-00284-00_Prelim_FCC.indd 38 9/18/2003, 3:51:15 PM Main Menu Page Routes a r y The Routes Page with a list of Routes and the number of Unused Routes. Creating and Using a Route Route navigation allows you to create a sequence of intermediate waypoints which lead you to your nal destination. The Rino stores 20 routes, each with up to 50 waypoints. A route can be created and modi ed from the Route Page, and waypoints can be added to a route from the Find N Go Menu. More complex routes can be cre-

ated using a PC and MapSource mapping programs and then transferred to the unit memory. To create a route:

1. Access the Routes page from the Main Menu. The page has a New button, a list of routes, and the number of unused routes. 2. Use the CLICK STICK to highlight the New button and press it IN to display the route Setup Page. 4. Use the Find N Go Menu to select a route waypoint 3. With an empty row (dashed) in the route list highlighted, press IN on the CLICK STICK to display the Find N Go Menu. from one of the Find N Go Menu categories and display the Information Page for the selected waypoint, city, exit, point of interest, etc. Highlight the on-screen Use button and press IN on the CLICK STICK to place it on the Routes List. P r e li m i n process in Steps 3 and 4. The route is named for the rst and last waypoints on the route. You can add waypoints to the end of an existing route 5. To add more waypoints to the route, repeat the To add a Find N Go Menu item to a route:

1. Select an item from the Find N Go Menu and at any time by using the Find N Go Menu. display its Information Page. If a Contacts is used in a route, the route will change as the Contacts position is updated, or it may be saved as a Waypoint to serve as a stationary point. 2. Display the page Options Menu and select the Add To Route option to display the Routes List. 3. Highlight and select the route desired and then press IN on the CLICK STICK. A Waypoint Added Successfully message displays. A Route with list of waypoints. 39 190-00284-00_Prelim_FCC.indd 39 9/18/2003, 3:51:16 PM Main Menu Page Routes Editing a Route To remove all waypoints:

1. Select the on-screen page options button from the Route Page and press the CLICK STICK IN to access the Options Menu. A Route Options Menu 2. Highlight the Remove All option and then press IN on the CLICK STICK to remove all waypoints from the list. When you see the prompt Do you really want to remove all waypoints from the route?, select Yes. To reverse the route:

1. Select the on-screen page options button from the Route Page and press the CLICK STICK IN to access the Options Menu. 2. Highlight the Reverse Route option and then press IN on the CLICK STICK to reverse the order of waypoints in the list. To change the route back to the original order, repeat this process. a r y To copy the route:

1. Select the on-screen page options button from the Route Page and press the CLICK STICK IN to access the Options Menu. 2. Highlight the Copy Route option and then press IN on the CLICK STICK to copy. The copied route displays on the Routes Page and is named the same but followed by a numeral 1. You may then rename and/or modify the copied route. P r e li m i n To delete the route:

1. Select the on-screen page options button from the Route Page and press the CLICK STICK IN to access the Options Menu. Delete Route Prompt 40 2. Select Delete and then press IN on the CLICK STICK. When you see the prompt Do you really want to delete route?, select Yes. To restore default settings for the route:

1. Select the on-screen page options button from the Route Page and press the CLICK STICK IN to access the Options Menu. 2. Select Restore Defaults and then press IN on the CLICK STICK to restore factory settings. 190-00284-00_Prelim_FCC.indd 40 9/18/2003, 3:51:17 PM Main Menu Page Routes a r y Route Waypoint Options Menu To review a route point:

1. Select the point from the Route Points List and press the CLICK STICK IN to access the Options Menu for the waypoint. 2. Highlight Review and then press IN on the CLICK STICK to display the Information Page. 3. Highlight the on-screen OK button and then press IN on the CLICK STICK to return to the Route List. To insert a new point on the route list:

1. Select the row where you want the new point inserted before. Press the CLICK STICK IN to access the Options Menu. 2. Highlight Insert and press IN on the CLICK STICK to display the Find N Go Menu and select a new waypoint, city, exit, point of interest, etc. 3. With the new point highlighted, press IN on the CLICK STICK to display the Information Page for the new point and then select the on-screen OK button to add it the route. To remove a point from the route list:

1. Select the point that you want to remove from the Route Waypoints List and press IN on the CLICK STICK to display the Options Menu. P r e li m i n To change a route point:

1. Select the waypoint that you want to change from the Route Waypoints List and press IN on the CLICK STICK to display the Options Menu. 2. Highlight Remove and press IN on the CLICK STICK to remove the waypoint from the list. 2. Highlight Change and press IN on the CLICK STICK to display the Find N Go Menu or create a new waypoint and add it to the points list. 3. Select a new waypoint, access its Information Page and press the on-screen Use button to replace the old route waypoint. Removing a Route Point 190-00284-00_Prelim_FCC.indd 41 9/18/2003, 3:51:17 PM 41 Main Menu Page Routes To move a route point:

1. Select the point from the Route Points List and press the CLICK STICK IN to access the Options Menu for the waypoint. 2. Highlight the Move option and press IN on the CLICK STICK to select the waypoint. 3. Use the CLICK STICK to move the point up or down in the list. Press IN on the CLICK STICK to leave the waypoint in the new list order. Moving a Route Waypoint by clicking and dragging. a r y Adding or Editing from the Route Map Page You can use the panning arrow with the Route Map Page displayed to add or edit route waypoints. To add a point at either end of a route:

1. Select the Route from the Routes List and press the CLICK STICK IN to display the Route Page. 2. Highlight the on-screen Map button at the bottom of the page and press IN on the CLICK STICK to display the Route Map Page. 3. Use the CLICK STICK to move the panning arrow to either end of the displayed route until the end point is highlighted. Then press it IN to display the map Options Menu and select Add Turns. This option appears only when highlighting the end point of a route. P r e li m i n 4. Move the panning arrow to a map item or location where you would like to extend the route and press IN on the CLICK STICK to display the Information Page for the new point. Press the on-screen Use button to return to the map page and then press it again to place the new waypoint. To add a route point within a route:

1. Follow steps 1 and 2 in the previous instruction. 2. Use the CLICK STICK to move the panning arrow to a route line. When the arrow touches the line, the line becomes thin. Press IN on the CLICK STICK to display the word ADD next to the line. Adding a Route Waypoint to an end point on the Route Map Page 42 190-00284-00_Prelim_FCC.indd 42 9/18/2003, 3:51:18 PM Main Menu Page Routes a r y Adding a new waypoint within a Route 3. Drag the line to a map item or other location where you want to establish a new waypoint and then press IN on the CLICK STICK to place the new waypoint. A waypoint information page displays. Press the on-screen OK button to save the new waypoint, then press it again after returning to the Route Map. To review or remove a route point:

1. Select the Route from the Routes List and press the CLICK STICK IN to display the Route Page. 2. Use the CLICK STICK to highlight the desired route and press IN to display the Route Page for that route. 3. Use the CLICK STICK to move the map panning arrow to the point you want to review and press IN to pop-up the Options Menu. Select Review or Remove and press IN again to either display the Information Page or remove it from the route. To view the next point in the route:

1. Follow Steps 1 and 2 above. 2. Place the map panning arrow on the point you are currently viewing and press IN to display the Options Menu. Select Next and press IN again to view the next waypoint. P r e li m i n A Route can be navigated using the Map Page or the Navigation Page. The Map Page displays your movement, the route line, and waypoints on the route. The Navigation Page shows compass direction and a bearing pointer. To navigate a route:

1. Select a route from the Routes List and then press IN Navigating a Route on the CLICK STICK to display the Route Page. 2. Highlight the on-screen Navigate button at the bottom of the page and then press IN on the CLICK STICK to begin navigating the route. The screen changes to the Navigation Page. 3. Move to the Map Page to view the route and the position icon indicating your current location. 4. Begin moving, watching directional information on the Navigation Page or progress on the Map Page. Navigation Page with Bearing Pointer 43 190-00284-00_Prelim_FCC.indd 43 9/18/2003, 3:51:19 PM Main Menu Page Routes To stop navigation:

1. Highlight the Stop Navigation option on either the Navigation or Map pages Options Menu or select the Stop button on the Route Page. Data Fields for the Route Page When navigating a Route, the data displayed in the data elds on the Route Page may be customized to provide useful navigation information that is speci cally related to route navigation. Data Field Options Menu a r y Data options (for Route Page only) include:

Distance to Point - The distance from your current location to a route waypoint. ETA To Point - Estimated Time of Arrival at a route waypoint (in sequence). ETE To Point - Estimated Time Enroute to a route waypoint. Leg Course - The line of travel between two route waypoints. Leg Distance - The distance between two route waypoints. Leg Time - The time required to travel from a route waypoint to the next. Pointer - Direction pointer to a route waypoint. Sunrise At Point - Time of sunrise at a route waypoint. Sunset At Point - Time of sunset at a route waypoint. P r e li m i n To select data eld options:

1. Use the CLICK STICK to highlight a data eld on the Route Page and then press IN to display the Data Field Options Menu. 2. Use the CLICK STICK to highlight the desired option and then press IN to enter the option in the data eld. Distance to Point vs Leg Distance. To view Leg information, highlight the end waypoint on a leg. 44 190-00284-00_Prelim_FCC.indd 44 9/18/2003, 3:51:20 PM Main Menu Page Tracks Page a r y Tracks Page Using Track Logs The Rino draws an electronic bread crumb trail on the Map Page as you travel along. This bread crumb trail is the Track Log. The Track Log contains information about points along its path, including time, and position. The Rino uses this information to allow you to navigate using the saved track. You may also save tracks from other Rino users as they communicate with you. The TracBack feature allows you to return along a If you want to keep a record of a certain track log or traveled path without marking any waypoints. When you are ready to return to where you started, the Rino takes you back by following the Track Log that you left behind. You can save a total of 20 tracks in the unit memory. The Track Log starts recording as soon as the unit gets a satellite loca-

tion x and the Track Log feature is turned on. When you no longer need a Track Log you can press the on-screen Clear button to remove it. use the TracBack feature, it is recommended that you clear the Track Log before you start traveling. The percentage of memory used by the current track log is displayed in a win-

dow at the top of the page. After the Track Log is Cleared, it displays zero percent. When the display reaches 100%, the most recent track points start to overwrite the least recent if the default setting Wrap When Full remains selected on the track log setup. To avoid losing track points you want, save the Track Log when it approaches the 99%

mark. The active track log will store up to 3000 points. P r e li m i n be displayed on the Main Map Page as you navigate. You may save up to 20 tracks with 250 points per track in the unit. Saved Contact tracks count towards this total. The Saved Track Page displays the track and it can also The TracBack feature allows you to retrace your track

(or another Rino users track) in both directions. Tracks are marked BEGIN and END. You can set the track recording interval to Distance, Time, or Automatic. You can set the Track display resolu-

tion to High, Medium, Low, and Lowest. You can also use the Options Menu to delete all saved tracks. Track on Main Map Page For effective use of the TracBack feature, clear the Track Log before starting a new trip or after saving the Track Log. Rename saved Track Logs to help identify them later. 45 190-00284-00_Prelim_FCC.indd 45 9/18/2003, 3:51:20 PM Main Menu Page Tracks Page To save and use a Track Log:

1. Access the Tracks page from the Main Menu. The page has On/Off buttons, a list of tracks, and the number of unused tracks. 2. You can press IN on the on-screen Off button to pause track logging. When track logging is active the On button appears to be recessed. Saved Track Page Save Track Options 3. Highlight the Save on-screen button and then press the CLICK STICK to display the track log Save Back Through list. 4. Use the CLICK STICK to select the time and date that you would like to save the track through. 5. Press IN on the CLICK STICK to save the track log and display the Track Page. The Track Page shows the track name (which can be renamed using the keyboard for data entry), the total distance of the track, track area (if available), a Show on Map option, and on-screen buttons for Map, OK, and Tracback. a r y 6. To enable the Tracback feature, highlight the Tracback button and then press IN on the CLICK STICK. This displays the Tracback Menu with two options, To Beginning and To End. Highlight the desired option and then press IN on the CLICK STICK to enable. Access the Map Page or the Navigation Page to navigate the Track. To use Track Log Setup options:

1. Highlight the Tracks Page Options Menu button at the top of the page and press IN on the CLICK STICK to display the menu. 2. Highlight the Tracks Log Setup option and then P r e li m i n press IN on the CLICK STICK. You can check the Wrap When Full option by highlighting it and then pressing IN on the CLICK STICK. You can highlight the Record Method and Interval elds and press IN on the CLICK STICK to display their options. Interval options change to accommodate the Record Method choices. Track Log Setup Menu If you choose Auto-record, you can set the recording interval from More to Least Often. You can set recording intervals for Time or Distance as desired. 46 190-00284-00_Prelim_FCC.indd 46 9/18/2003, 3:51:21 PM Main Menu Page Proximity Page a r y Proximity Page Proximity Points The Proximity list lets you de ne an alarm circle around a stored waypoint/contact position, and can be used to help you avoid dangerous areas or to alert you when you have strayed away too far from other Rino users. Up to ten waypoints may be listed, with a maximum alarm radius of 99.99 nautical or statute miles or kilometers. If entering a proximity alarm circle, a Near Proximity Point <name> message will appear. If leaving a proximity alarm circle, a Leaving Proximity Point <name> message will appear. This option is handy in case you wish to remain a certain radio distance from another user. To add a proximity waypoint:

1. Use the CLICK STICK to highlight an empty space 2. From the Review Page, highlight Use and press the CLICK STICK IN to con rm. The distance eld will now be highlighted. Press IN again to begin entry of the proximity radius. on the Proximity list and press IN on the CLICK STICK. The Find N Go screen appears. Highlight Waypoints or Contacts and press IN on the CLICK STICK. (You may also select from other items listed on the Find N Go screen.) P r e li m i n To turn proximity alarms on or off:

1. Use the CLICK STICK to highlight the eld left of Proximity Alarm and press IN to place a check. 3. Use the CLICK STICK keys to enter a distance value (to 99.99 units) and press IN. To clear one or all proximity point(s) from the list:

1. Use the CLICK STICK to highlight the proximity point to clear. 2. To clear a single alarm, press IN and choose Remove and press IN. 3. To clear all proximity waypoints, highlight the Options Menu and press IN. Choose Remove All and press IN on the CLICK STICK. 4. Use the CLICK STICK to highlight the OK prompt and press IN to con rm. Proximity Circles on Map Page 47 190-00284-00_Prelim_FCC.indd 47 9/18/2003, 3:51:22 PM Main Menu Page Satellite Page Satellite Page The Satellite Page provides a picture of satellite signal tracking, tells you when the unit is ready for navigation, and shows your location coordinates. 90 P r e li m i n 45 Satellite Page using WAAS. The Skyview graphic represents a view looking up at the sky from your current location showing satellites and their assigned numbers. The outer ring represents the horizon around you, the inner ring represents a view above you at a 45 angle from vertical, and the center represents directly overhead. Signal Strength Bars for each satellite are shown to the left of the Skyview. Satellites and their signals appear as hollow shapes until a signal is received and then they appear darkened in. The stronger the signal, the taller the signal bar. a r y Center dot - 90 above the horizon Inner ring- 45 above the horizon Outer ring -

the horizon The Wide Area Augmentation System (WAAS) capability produces a more accurate position x. When enabled (the GPS mode set to Normal and the interface set to other than RTCM mode), this feature searches for a WAAS satellite near your location and then receives data for correcting differentials in the GPS satellite signals and the WAAS satellite numbers (beginning at No. 33 or above) display on the Satellite Page. When differential correction data has been received for GPS satellites (num-

bers 32 or below), a D displays in the signal bar beneath the skyview. It is helpful to orient the unit antenna toward the WAAS satellite shown in the skyview. To learn more about the WAAS System, access the Federal Aviation Administration web site (http://gps.faa.gov/). Because the Rino relies on satellite signals to provide you with naviga-

tional guidance, the units view of the sky determines how fast you achieve navigational status. GPS signals do not 48 190-00284-00_Prelim_FCC.indd 48 9/18/2003, 3:51:23 PM Main Menu Page Satellite Page a r y Satellite Page Options Menu Highlight the on-screen button at the top of the page & press in on the CLICK STICK. travel through rocks, buildings, people, metal, or heavy tree cover so for best results, keep the unit in clear view of the sky. At least three satellite signals are needed to determine your location, otherwise the unit displays a Poor Satellite Reception message with four options and a brief expla-

nation to guide your decision:

Use with GPS Off - Select this option if you want GPS off. New Location - Select this option if you have moved more than 600 hundred miles (from where you last used the unit). Restart Search - Select this option if today is not

(date provided). Continue Acquiring - Select this option if no other option applies. (The unit will attempt to gather GPS signals.) The Satellite Page options include:

Use With GPS Off - Use this option when you are indoors, a clear view of the sky is obstructed, or you want to save battery power. You can enter data, create routes, etc., but cannot navigate in this mode. Track Up/North Up - You can orient the satellite skyview by selecting Track Up (your direction of travel) or North Up (the satellite skyview oriented to the north). New Location - If you are more than 600 miles (from where you last used the unit), select the New Loca-

tion and then the Use Map options to approximate your location. This gives the unit reference informa-

tion and speeds satellite acquisition. P r e li m i n 190-00284-00_Prelim_FCC.indd 49 9/18/2003, 3:51:24 PM 49 Main Menu Page Satellite Page To select the Use With GPS Off option:

1. Use the CLICK STICK to highlight the Option Menu button at the top of the page and then press it IN to display the Options Menu. 2. Use the CLICK STICK to highlight the Use With GPS Off option and then press it IN to activate. The Rino stops tracking satellites and should not be used for navigation. However, the next time you turn the unit on, it returns to Normal GPS operation. To select Track Up or North Up:

1. Use the CLICK STICK to highlight the Option Menu button at the top of the page and then press it IN to display the Options Menu. 2. Highlight either the Track Up or North Up option

(depending on which is currently in use), and press in on the CLICK STICK to activate. a r y To enter a new location:

1. Use the CLICK STICK to highlight the Option Menu button at the top of the page and then press it IN to display the Options Menu. 2. Highlight New Location and press in on the CLICK STICK to display choices of Auto or Use Map. If you choose Auto the Rino determines your new location automatically. If you choose Use Map a map page displays with instructions stating, Point to your approximate location and press ENTER. Use the CLICK STICK to move the map pointer to your location on the map and press it IN. P r e li m i n 50 190-00284-00_Prelim_FCC.indd 50 9/18/2003, 3:51:24 PM Main Menu Page Setup Page a r y Setup Menu The Setup Menu The Setup Pages allow you to customize your Rino to your personal preferences. You can choose time settings, units of measure, display backlighting and contrast set-

tings, heading measurement, interface options and system operating mode. By highlighting the icons on the Setup Menu and then pressing in on the CLICK STICK, you can display the Setup Page for each of the menu items. Time Page You can set the time to match your location or for a projected location anywhere in the world. Time Format - Allows you to choose from 12 or 24 Time Zone - Can be set to one of the eight US Time hour time format so the clock displays like a standard clock with 12-hour AM and PM cycles or display a 24-

hour cycle (Military Time). Zones, or 24 International Time Zones (nearest city or geographical region). Select Other so you can enter the UTC Time Offset. P r e li m i n To set the time:

1. Use the PAGE button to access the Main Menu. 2. Use the CLICK STICK to highlight the Setup Icon and then press it IN to display the Setup Menu. 3. Use the CLICK STICK to highlight the Time Icon and then press it IN to display the Time Page. Daylight Savings Time - Can be turned On or Off or set to Automatic. 4. Use the CLICK STICK to highlight the Time Zone eld then press it IN to display the time zone list. 5. Highlight a time zone from the list and then press 6. IN on the CLICK STICK. If you choose Other, you must enter a UTC offset value. 7. The correct time displays at the bottom of the page. Time Setup Page 51 190-00284-00_Prelim_FCC.indd 51 9/18/2003, 3:51:25 PM Main Menu Page Setup Page Units Page The Units features are best used by individuals with a working knowledge of map grids and datums. To learn more about these subjects, visit the National Imagery and Mapping Agency at http://www.nima.mil or inquire at your local library. To select Units Page options:

1. For all elds on this page, highlight the eld and Units Page a r y then press the CLICK STICK to display the Options Menu for the eld. 2. Highlight the desired option on the menu and then press the CLICK STICK to place it in the eld. Position Format - Allows you to choose from different grid formats. The default position format, hdddmm.mmm displays the latitude and longitude in degrees and minutes and is most commonly used.The following additional formats are available:

hddd.ddddd latitude/longitude in decimal degrees only, hdddmmss.s latitude/longitude in degrees, minutes, seconds, UTM/UPS Universal Transverse Mercator / Universal Polar Stereographic grids, British Grid, Dutch Grid, Finnish KKJ27, German Grid, India Zones, Irish Grid, Loran TD, Maidenhead, MGRS, New Zealand, Qatar Grid, RT90, Swedish Grid, Swiss Grid, Taiwan Grid, User Grid, W Malayan RSO P r e li m i n When creating new waypoints using LORAN TD Using the LORAN TD Format coordinates, you must set the correct LORAN chain num-

ber and secondary stations in the Setup TD eld before storing the waypoint. After the waypoint is stored in unit memory, it will always reference the LORAN chain num-

ber and secondary stations currently selected in the Setup TD eld. If you enter a different LORAN chain number, change the secondary stations or offsets in the Setup TD eld, the active waypoint information will re ect those changes. Since the GPSMAP unit does not rely on the LORAN signal for navigation, it can reference a different GRI chain and/or secondary stations and still navigate to the location stored in memory. Position Format Options Menu The User datum is based on a WGS-84-Local datum and is an advanced feature for unlisted or custom datums. To learn more, check your local library or on the world wide web for educational materials on datums and coordinate systems. 52 190-00284-00_Prelim_FCC.indd 52 9/18/2003, 3:51:26 PM To setup Loran TD from the Main Menu:

1. When Loran TD is chosen, the Loran TD setup window will automatically appear. 2. To change the settings of any of the ve elds, highlight the eld, press the CLICK STICK IN. 3. When done, highlight Save and press IN. 4. To return to the setup page, simply select Loran TD from the Position Format eld again.. For more information on Loran TDs, you may down-

load Garmins Loran TD Position Format Handbook from the Garmin web site at http://www.Garmin.com/

support/userManual.html. If the active GRI Chain, secondary stations or offsets have been changed since the waypoint was created, the waypoint will now reference the active GRI chain and secondary stations and adjust the TD coordinates ac-

cordingly. Remember that the GPS is not relying on the LORAN signal for navigation and actually converts the TD coordinate to a useful LAT/LON coordinate (in the back-

ground) before storing the waypoint to memory or using it for navigation. Because of this the unit can navigate to a TD coordinate anywhere in the world. P r e li m i n datums in common use. Every map is based on a map da-

tum (a reference model of the earths shape) and is usually listed in the title block of the map. If you are comparing GPS coordinates to a paper map, chart, or other reference, the map datum in this eld must match the horizontal map datum used to generate the map or other reference. The default datum is WGS 84 (World Geodetic Survey 1984) and should only be changed when using maps or charts specifying a different datum. If a map does specify a datum, use the options list to nd datums applicable to the region of the map, selecting the one that provides the best positioning at a known point. If necessary, you also may choose the User datum for custom designed grids. Map Datum - Offers a selection of nearly all map Distance/Speed - You can choose from three units of measure to display your rate of travel. Elevation/Vertical Speed - You can choose from two units of measure to record your elevation and vertical speed. Main Menu Page Setup Page a r y Setting Loran TD Info Map Datum Options Menu 53 190-00284-00_Prelim_FCC.indd 53 9/18/2003, 3:51:26 PM Main Menu Page Setup Page Display Page You can adjust the amount of time that the backlight-

ing feature stays on and adjust the screen contrast. Backlighting Timeout - Choose from Stays On, to delays of 15 seconds, 30 seconds, one, or two minutes before timing out. Contrast Adjustment - Can be adjusted from light to dark using the slider adjacent to the contrast bar. Display Page To set the backlighting timeout:

1. Highlight the Backlight Timeout eld and then press IN on the CLICK STICK to display options. 2. Highlight the desired option and then press IN on the CLICK STICK to activate it. To adjust the contrast:

1. Highlight the contrast slider and then press IN on the CLICK STICK to activate. 2. Move the CLICK STICK up or down to move the slider until the desired contrast has been set. a r y Heading Page P r e li m i n Degrees or Mils. You can select the type of heading displays, the types of North References, or enter the magnetic variation. Display - Allows you to choose from Cardinal Letters, North Reference - You can choose from True, Magnetic, Grid or User options. If User is chosen, you must correct for the Magnetic Variation. The Electronic or GPS compass uses the North Reference setting to create a bearing. Heading Page To select either option:

1. Highlight the eld and then press IN on the CLICK STICK to display the options. 2. Highlight the option and press IN on the CLICK STICK to activate. 54 190-00284-00_Prelim_FCC.indd 54 9/18/2003, 3:51:27 PM Main Menu Page Setup Page a r y Serial Data Options Interface Page The Interface Settings Page allows you to choose from different input/output serial data formats. This feature is used when connecting to external NMEA devices, a DGPS beacon receiver, a personal computer, etc. See page 68 for using the Rino with MapSource. The formats are: formats:

Garmin - The proprietary format used to exchange waypoint, track, and map data with a PC. Use this setting for transferring data when using a MapSource product. Garmin DGPS - Allows DGPS input using a Garmin beacon receiver and a standard RTCM SC-104 and DGPS tuning. NMEA In/NMEA Out - Supports the output of standard NMEA 0183 version 3.0 data. Use this for real-time plot-

ting with MapSource or 3rd party programs. Text Out - Allows ASCII text output of location and veloc-

ity information without input capabilities. RTCM In - Allows DGPS input using a standard RT-

CM SC-104 format without output capabilities. RTCM In/NMEA Out- Allows DGPS input using a standard RTCM SC-104 format and supports the output of standard NMEA 0183 version 3.0 data. RTCM In/Text Out- Allows DGPS input using a standard RTCM SC-104 format and simple ASCII text output of location and velocity information. None - Provides no interfacing capabilities. P r e li m i n selected, additional elds are provided to control a Garmin differential beacon receiver (e.g. GBR 21 & GBR 23) directly from your unit. Tuning is automatic with Scan or you can enter the beacon frequency and bit rate when you select User from the Beacon list to manually tune the receiver. Refer to the beacon receiver instructions. If Garmin DGPS or RTCM in/NMEA Out format is To select a serial data format:

1. Highlight the Serial Data Format eld and then press IN on the CLICK STICK to display options. 2. Highlight an option and then press IN on the CLICK STICK to activate it. 55 190-00284-00_Prelim_FCC.indd 55 9/18/2003, 3:51:28 PM Main Menu Page Setup Page System Page The System Setup Page allows you to change GPS operation modes, use the WAAS capabilities, and turn the Message Beep on or off and choose the battery type. The Option Menu allows you restore defaults or display the current version of unit operating software and the Unit I.D. Number. Software updates and instructions for downloading are available from the Garmin web site

(www.Garmin.com). System Setup Page in Normal Mode, WAAS Enabled. P r e li m i n Choose one of the four GPS options other than Normal to signi cantly save battery power. The Battery Saver mode reduces the rate of satellite signal posi-

tion updating and the GPS Off option stops satellite signal reception altogether. The Demo Mode simulates navigation. a r y See page 48 for an explanation of WAAS capabilities. To adjust System Page options:

1. Use the CLICK STICK to highlight the eld and then press IN to display options. Then use the CLICK STICK to select the desired option and press IN. To display Software Version and Unit ID:

1. Use the CLICK STICK to highlight the Options Menu and then press IN. Then use the CLICK STICK to highlight Software Version and press IN. Press IN again to close that Software Version window. To change Battery Type:

1. Use the CLICK STICK to highlight the Battery Type eld and then press IN. Then use the CLICK STICK to select the desired option and press IN. Use the following settings for different battery types:

Battery Type Alkaline NiMH NiCad Lithium (1.2V) Lithium (1.5V) Set Unit To Alkaline NiMH NiMH NiMH Alkaline Advertised battery life is rated using Alkaline batteries. You may not get the listed battery life using other types of batteries. 56 190-00284-00_Prelim_FCC.indd 56 9/18/2003, 3:51:28 PM Main Menu Page Calendar a r y Calendar Page Calendar Page Options Calendar This feature provides you with a monthly calendar with programmable reference notes dates. You can display one monthly calendar of days at a time and mark days on each with reference notes using the data entry keypad. Days that are shaded have notes added. You can create reference notes for multiple months and for months in years yet to come. You can record 100 notes with up to 18 characters each. To change the month and year:

1. Highlight the left or right arrows on either side date:

of the date and press IN on the CLICK STICK to change the month/year. The left arrow will show past months/years and the right arrow will show future months/years. Menu. To create a reference note for a selected To use the current month and year:

1. Choose Set To Current Date from the Options 1. Use the CLICK STICK to highlight the day of the month and then press IN to display the Options Menu for the date. P r e li m i n 2. Highlight and select New Note to begin entering text from the keyboard. Observe the message as it is created in the message block below the keyboard. 3. To edit or delete a note previously created, highlight the date and press IN on the CLICK STICK. Options shown include Edit Note, Delete Note, View Sun and Moon, or View Hunt and Fish. To delete notes by week:

1. Choose Delete Notes... from the Options Menu. 2. From the Oler Than.. window, choose the desired option and press IN on the CLICK STICK. Calendar Page Keyboard and Message Block 190-00284-00_Prelim_FCC.indd 57 9/18/2003, 3:51:29 PM 57 Main Menu Page Alarm Clock /

Calculator Alarm Clock This feature provides an alarm for the system clock. Enter a time in the time eld and turn the alarm on and off from the control eld menu. Remember to enter alarm times in the same time format (UTC or local) youre using for your system. The unit must be on for the clock alarm to work. To set an alarm clock time:

1. Use the CLICK STICK to highlight the time eld Alarm Clock Page and then press IN to display the keyboard. Then use the CLICK STICK to enter the desired time, choose OK and press IN. To turn the alarm clock On/Off:

1. Use the CLICK STICK to highlight the Alarm Mode eld and then press IN to display the options. a r y 2. Choose On or Off and press IN on the CLICK STICK. P r e li m i n When the alarm sounds, a brief tone will be heard

(unless Message Beep is Off under System Setup) and Alarm Clock will appear on the screen. Press IN on the CLICK STICK to acknowledge the alarm. Calculator This feature provides you with all the basic functions of both of standard or scienti c calculator. You can per-

form most calculations identi ed by the function symbols along the sides of the keypad and can save the results temporarily in the memory. The memory is cleared either manually or when you turn off the Rino. To change calculator options:

1. Highlight the page Options Menu and press IN on the CLICK STICK to display the Scienti c/

Standard and Radian/Degrees options. 2. Highlight the option you want to change and then press IN on the CLICK STICK for the change to take effect. 3. Use the CLICK STICK to move about the keypad, enter numbers, and perform calculations. Calculator Page 58 190-00284-00_Prelim_FCC.indd 58 9/18/2003, 3:51:30 PM Main Menu Page Stopwatch a r y Stopwatch Page Stopwatch This feature allows you to use the unit as a stopwatch, including a lap timer. You may also have the unit record the lap time based on distance. For example, if you set the lap distance to one mile, the unit will record the time it takes you to travel one mile. To start the stopwatch:

1. Use the CLICK STICK to highlight the Start eld and then press IN. You may also press the V

(Volume) key to Start the stopwatch. To stop the stopwatch:

1. Use the CLICK STICK to highlight the Stop eld and then press IN. You may also press the V

(Volume) key to Stop the stopwatch. To use the lap feature:

1. With the stopwatch running, use the CLICK STICK To reset the stopwatch:

1. With the stopwatch stopped, use the CLICK STICK to highlight the Reset eld and then press IN. You may also press the Z (Zoom) key to reset the times. to highlight the Lap eld and then press IN. You may also press the Z (Zoom) key to capture the lap time. P r e li m i n Menu and then press IN. Choose Lap by Distance and press IN. To return to Lap by Button Press, repeat these same steps. To time lap by distance:

1. Use the CLICK STICK to highlight the Options To set a lap distance value:

1. Use the CLICK STICK to highlight the Options Menu and then press IN. Choose Set Lap Distance and press IN. To return to Lap by Button Press, repeat these same steps. 2. Use the CLICK STICK to highlight the eld you wish to change and then press IN. Enter the new value and press IN. When done, highlight OK and press IN on the CLICK STICK. Setting Lap By Distance 59 190-00284-00_Prelim_FCC.indd 59 9/18/2003, 3:51:31 PM Main Menu Page Sun and Moon /

Hunt and Fish Sun and Moon This feature provides you with a graphic display of both sun and moon positioning for a certain date, time and location with times for sunrise, sunset, moonrise, and moonset. To set the date and time:

1. For the Date and Current Time, highlight each eld, then press IN on the CLICK STICK to begin data entry of individual characters. Sun and Moon Page 2. To display the current date and time, highlight the page Options Menu and press IN on the CLICK STICK to display the Use Current Time option and then press IN on the CLICK STICK to activate. To set the location:

1. Highlight the Location eld and then press the CLICK STICK to display the New Location options list. 2. Highlight the option desired and then press IN on a r y the CLICK STICK to activate. If you choose Current Location the eld values displayed on the page displays your location. If you choose Use Map, a map page displays. Use the map pointer to identify the desired location and then press IN on the CLICK STICK. If you choose Use Find N Go Menu follow instructions for using the Find N Go Menu on page 31. P r e li m i n Hunt and Fish This feature provides you with a listing of best times for hunting and shing for a chosen location and date. To set the date:

1. Highlight the date eld and then press IN on the CLICK STICK to begin data entry of individual characters. To display the current date, highlight the page Options Menu and press IN on the CLICK STICK to display the Use Current Date option and then press IN on the CLICK STICK to activate. Hunt and Fish Page 60 190-00284-00_Prelim_FCC.indd 60 9/18/2003, 3:51:31 PM To set the location:

1. Highlight the Location eld and then press IN on the CLICK STICK to display the New Location options list. 3. 2. Highlight the option desired and then press IN on the CLICK STICK to activate. If you choose Current Location the eld values displayed on the page re ect the times at your current location. If you choose Use Map, a map page displays. Use the map pointer to identify the desired location and then press IN on the CLICK STICK. If you choose Use Find N Go Menu follow instructions for using the Find N Go Menu on page 31. Area Calculator To calculate the area:

1. With the Rino having a GPS x, press Start when This feature provides you an area calculation as you move about a location or view a saved track. The area calculation displays in acres, hectares, and square feet, square yards, square meters, square kilometers, and square miles. P r e li m i n 4. Use the CLICK STICK to store the area as a saved 2. Begin walking or traveling the outskirts of the area 3. Continue to the end point, then use the CLICK STICK to stop the calculation. you are ready to begin. you want to measure. track. To review the area of a saved track:

1. On the Tracks page, highlight a Saved Track and press IN on the CLICK STICK to see a map with the area shown in a data eld at the bottom. Main Menu Page Hunt and Fish /

Area Calculator

NOTE: The times displayed are the recognized best and good times for hunting and shing. But, be certain that they are not in con ict with state and local game laws which may vary from location to location. It is your respon-

sibility to know and abide by a r y these laws. New Location Options 61 190-00284-00_Prelim_FCC.indd 61 9/18/2003, 3:51:32 PM Main Menu Page Games Menu Games The Games Page includes: Memory Race, Waypoint Bomber, Clothesline, Assimilation and Beast Hunt. Highlight the appropriate icon and then press IN on the CLICK STICK to play the desired game. Brief instructions will be displayed when you start each game. Memory Race Be the rst to clear the board by matching all of the two symbols sets together. Each symbol is in a square (you can adjust the size) which you will need to walk or travel to. Once your position appears in a square, highlight Open at the bottom of the screen and press IN on the CLICK STICK. Play by yourself or race against others! Press PAGE to quit at any time. To adjust the Grid Size or Square Size:

1. Highlight the Grid Size or Square Size eld and press IN on the CLICK STICK. 2. Choose the desired size and press IN. Highlight Start and press IN to begin the game!

a r y Waypoint Bomber P r e li m i n In this game, its good to stay on the move! Two or more players attempt to bomb each other using their Rino radios. All players must be on the same channel/code to play. Move your cursor around on the map page using your CLICK STICK. When you think an opponent is close to the cursor, drop a bomb by press IN on the CLICK STICK. The receiving radio will show an Incoming message. If the receiving radio is within the blast circle (about 45 feet), it will display a message that you have been hit. You must wait 10 seconds during shots to reload. You could play to the rst player with so many hits loses or have a timed game with the winner being the one with the least amount of hits on their radio! Hint: Mark stationary objects such as trees, poles etc and drop a bomb when an opposing player is near that object! Adjust the rules to your liking!

1. To re at the cursor location, press Enter (IN on the CLICK STICK 2. To re at your current location, press the TALK key. 3. Press CALL to view the scoreboard at any time. 4. Press PAGE to quit the game at any time. 62 190-00284-00_Prelim_FCC.indd 62 9/18/2003, 3:51:33 PM Clothesline Team members select the same user symbol and then attempt to hit or clothesline other players by press-

ing the TALK key when an opposing team member is between them. You may also mark a point and assign it a symbol to be used as a stationary team member. You must wait 10 seconds between attempts. Press CALL to show the score and PAGE to quit the game. Assimilation Think of this as a high-tech game of tag. Team The objective is to nd and kill the beast with an ar-

members select the same user symbol and then attempt to assimilate others into their team by getting within 30 feet of them and pressing the TALK key. You can set a time limit, with the largest team winning, or play until the other team is completely assimilated! Set your own rules and enjoy! Press CALL to show the score and PAGE to quit the game. Beast Hunt P r e li m i n row before it incinerates you or you fall into one of several pits while navigating a maze of platforms! From time to time you will be transported by slides that curve or move diagonally. When you think you know where the beast is, from an adjacent spot, press Enter (IN on the CLICK STICK) to initiate aiming. With the CLICK STICK, point the arrow in the direction where you think the beast is and press IN on the CLICK STICK to re. When you lose a game, the screen will display the layout of hazards, slides, warning platforms and the location of the beast. A scoreboard keeps track of your wins and losses. Press PAGE anytime during the game for further instructions, to turn the sound On/Off or to quit. Main Menu Page Games a r y Clothesline Assimilation Beast Hunt 63 190-00284-00_Prelim_FCC.indd 63 9/18/2003, 3:51:34 PM Appendix A FRS Explained What is FRS?

FRS, or Family Radio Service, is a UHF radio frequency band licensed by the FCC for general public use. The operating frequency ranges from 462.5625 to 467.7125 MHz, with a transmitting power of one half watt. FRS radios are small and lightweight, making them ideally suited for outdoor activities. The use of FRS radios does not require a license. FRS was intended for use by families and small groups as an inexpensive means of two-way voice communication. The use of GMRS (General Mobile Radio Service) radios do require a FCC license. The operating frequency fro GMRS ranges from 462.550 to 462.725 MHz FRS radios broadcast on one of 14 channels, each with a r y a speci c frequency within the FRS band. P r e li m i n FRS is intended for use throughout the United States, its territories and possessions. It may also be used in Canada. FRS is not approved outside of these areas and may interfere with local government communication frequencies ( re, police, etc.). GMRS use is currently not allowed in Canada. More sophisticated FRS radios also include call func-

tions, squelch codes, channel scan, and voice scramble. Call functions allow you to push a Call button on the radio, and alert other radios set on the same channel. This feature generates a call tone and is handy in a noisy environment where the tone is easier to initially identify than plain speech. Squelch codes, are useful when a lot of radio traf c occurs on FRS frequencies. This allows you to selectively block out other FRS users that are not part of your group. They will still be talking with others in their own group, but you will not hear them on your radio. They may or may not hear you and members of your group on their own radios. Squelch codes act as a lter, blocking your FRS radio from hearing other unwanted FRS users. Channel scan allows your FRS radio to scan all FRS frequencies for signals. This is a great way to identify an unused or less-used channel for your group. After scanning brie y to see what channels other users are on, 64 190-00284-00_Prelim_FCC.indd 64 9/18/2003, 3:51:34 PM Appendix A FRS Explained a r y simply set your FRS radios to an unused channel and enjoy less interference. You may also nd this useful just to listen in on others currently using FRS. After all, these are public-use frequencies and everyone has a right to talk or listen in. For greater communication, some FRS radios have a voice scramble feature. This features will cause your message to sound garbled to other FRS users that are not part of your group. However, it does not guarantee your conversations will be 100 percent private and secure. Other casual FRS users will not hear your messages, but users with similar radios or more technically-oriented users can still monitor your conversations. If you are operating in an urban environment or in FRS radios typically feature half watt transmit power. You may encounter FRS radios with lower transmit power speci cations than this, but all are at least 100mW (0.1 watt). You can expect your FRS radio to offer reliable operation at one-mile range. If the area between you and another FRS operator is free of obstructions, operation up to a two-mile range can be achieved. What are the limitations?

P r e li m i n varying terrain (canyons or mountains), these man-made or natural features will act as obstructions limiting the maximum reception range of your FRS radio. The UHF FRS frequency is line of sight, meaning that the signals do not follow the surface of the earth, but instead radiate in a straight line from the transmitting antenna. If there is an obstruction between the transmitting FRS radio and the receiving FRS radio, the signal will not be received. Smaller obstructions, such as trees, cars and even crowds of people will cause some loss of signal, resulting in reduced maximum range. Other FRS users can crowd FRS frequencies. You may nd squelch codes and channel scanning useful to minimize interference from other FRS users. 190-00284-00_Prelim_FCC.indd 65 9/18/2003, 3:51:35 PM 65 Appendix B Physical Speci cations Case: Fully-gasketed, high-impact plastic alloy, waterproof to IPX7 standards

(waterproof to one meter for 30 minutes) Size: 4.5H x 2.3W x 1.6D; 7H with antenna (11.4 x 5.8 x 4.1; 17.8 cm) Weight: Approx. 7.6 ounces (236 g) w/batteries Temperature Range: 5 to 158F (-15 to 70C) (operating) Display: 1.4H x 1.4W (3.6 cm x 3.6 cm) 160 x 160 pixels, high-contrast LCD Performance Receiver: WAAS Enabled, Differential-ready, 12 parallel channel Acquisition time: Approx. 15 seconds (warm start) Approx. 45 seconds (EZinit/cold start) Approx. 5 minutes (First Time/AutoLocate) Update Rate: 1/second, continuous GPS Accuracy: <15 meters (49 ft) RMS, 95% typical1 DGPS (USGC) Accuracy: 3-5 meters (10-16 ft), 95% typical with DGPS corrections2 DGPS (WAAS) Accuracy: <3 meters (10 ft), 95% typical with DGPS corrections2 Velocity Accuracy: 0.05 meter/sec steady state Dynamics: Performs to speci cations to 6 gs Interfaces: NMEA 0183, RTCM 104 (for DGPS corrections) and a r y RS-232 for PC interface P r e li m i n FRS and GPS - up to 15 hours5 Channels: 22 (1-14 FRS, 15-22 GMRS) GMRS requires FCC license Squelch Codes: 38 Range: Up to 2 miles on FRS; up to 5 miles on GMRS Radio Output Power: FRS 0.5 watt; GMRS 1.0 watt Power Input: Three 1.5-volt AA batteries3 Battery Life: GPS only - up to 28 hours; FRS only - up to 20 hours;

Antenna: Quad-helix Radio Speci cations are subject to change without notice. 1Subject to accuracy degradation to 100m 2DRMS under the U.S. DoD-imposed Selective Availability program. 2With optional Garmin Differential Beacon Receiver Input (such as Garmin GBR 21 or 23). 3The temperature rating for the Rino may exceed the usable range of some batteries. Alkaline batteries can rupture at high temperatures. External power can only be applied using the Garmin Auto Power Adapter or PC Interface Cable with Auto Power Adapter. These cables contain a 12 Vdc to 3 Vdc voltage regulator. Modi cations or other applications voids the product warranty. 4Alkaline batteries lose a signi cant amount of their capacity as temperature decreases. Use lithium batteries when operating the Rino in below-freezing conditions. Extensive use of screen backlighting and the radio signi cantly reduces battery life. Different brands of batteries vary in performance. 55, 5, 90 Duty Cycle - 5% receive with audio unmuted, 5% transmit and 90% standby (receive with audio muted) 66 190-00284-00_Prelim_FCC.indd 66 9/18/2003, 3:51:35 PM Appendix C Accessories a r y To obtain accessories, see your local dealer or visit the Garmin web site at www.Garmin.com and click on Shop link. 12-volt Adapter Cable: Provides unit power from an automobile cigarette lighter. 2.5 to 3.5 mm Jack Adapter: Allows you to use 3rd party headsets with your Rino unit.. Bash Guard Kit: Helps protect the Rinos edges against hard shocks. Includes 2 bash guards, quick-release neck lanyard and belt clip. Carrying Case: Protects the Rino and permits use while in the case. Earbud with PTT (Push To Talk) Mic: Earbud ts snuggly inside of and has a clip-on mic with PTT button. Flexible Ear Receiver: Comfortable earpiece for better hearing ability of your Rino. Headset with VOX Boom Mic: Hands-free at its best!

Utilize the Rinos VOX (Voice Operated Transmission) feature with this headset and voice activated boom mic. Instructional Video: For getting accustomed to your Rino basic operations quickly. MapSource Map Data CD-ROMs: An excellent tool for creating waypoints and routes on your PC using a background map and downloading them to your Rino. See your Garmin dealer for MapSource details. NiMH Battery Charger: Why buy when you can recharge? Includes NiMH battery charger and 4 AA NiMH batteries. PC Data Cable and 12-volt Adapter: Allows transfer of waypoints and routes from a PC to the Rino and provides unit power from an automobile cigarette lighter. Rail/Handlebar Mount: Allows you to mount your Rino on most rails or handlebars. Suction Cup Mount: Allows you to mount your Rino on most smooth surfaces or inside windscreens. P r e li m i n 190-00284-00_Prelim_FCC.indd 67 9/18/2003, 3:51:36 PM 67 Appendix D MapSource Setup Garmin MapSource CD-ROMs offer a variety of detailed mapping data and navigation information. MapSource is also an excellent medium for storage and safety backup of Personal Waypoints, Routes and Saved Tracks. Transferring MapSource Map Data If you have purchased a Garmin MapSource CD-ROM mapping program you may want to transfer detailed map data before beginning use, to provide your unit with maximum Find features and mapping capability. The Rino accepts up to 8 MB of map data from most MapSource products. It is not possible to transfer 3rd party maps into Garmin products. You cannot view multiple types of MapSource data in the same location at the same time (one will draw over the other). When you leave a MetroGuide area for example and enter the area of a topographic map, the display will change to contour lines. The same is true when moving from a topo map to a MetroGuide map. a r y See your Garmin Dealer or visit the Garmin web site at:

www.Garmin.com for information. The BlueChart maps are at the top of the hierarchy and will replace any other map information. Here is the list of the hierarchy for your reference beginning with those titles that take precedence:

1. BlueChart 2. MetroGuide 3. Fishing Hot Spots 4. Points of Interest 5. U. S. Waterways & Lights 6. U. S. Topo 7. Roads and Recreation 8. WorldMap Map data transfer requires the use of a PC, a Garmin MapSource CD-ROM, and the PC Interface Cable with RS-

232 serial port connector supplied with this unit. Follow detailed instructions for data transfer in the MapSource Users Manual. P r e li m i n You can transfer detailed map data to the Rino from a Garmin MapSource CD-ROM. The Rino 130 can accept up to 8 MB of data from any MapSource program loaded on a PC and connected to the Rino Data Port. For this function you need the PC Data Cable provided with your unit. Transferring Map Data:

To setup for data transfer:

1. Remove the Power/Data Port cover on the back of the unit by lifting up on the protective cover on the back of the unit. 2. Connect the serial port connection on the cable to the PC serial port. 3. Connect the remaining cable connector to the back of the Rino by orienting the slot on the connector with indexing bar on the back of the unit. Then, slide the connector in place. Be sure that the cable is pushed all the way into the back of the unit!

4. Turn on the Rino and follow instructions for map data transfer provided in the MapSource Users Manual. See also page 55 for unit interface settings. 68 190-00284-00_Prelim_FCC.indd 68 9/18/2003, 3:51:36 PM Appendix E To resolve problems that cannot be remedied using this guide, contact Garmin Customer Service at:

GPS Troubleshooting 913-397-8200 or 800-800-1020 Symptom Probable Cause Guide Remedy Unit does not turn on. Batteries are exhausted. Replace batteries. Unit does not turn ON, even with new batteries. Batteries may be installed backwards. Reinstall batteries. You are pressing and releasing the POWER button. Batteries may be nearly exhausted. The units view of satellites is The unit turns On, then turns Off. It takes more than ten minutes to get a location x. Cannot access a WAAS system satellite after 2 to 5 minutes. obstructed. System GPS operation is set to some-

thing other Normal and/or interface Your view of the satellite is obstructed or you are located too far from satellites currently in service for the Americas. setting is for RTCM. P r e li m i n MetroGuide map data is not activated. You have not collected enough infor-

The Track Log feature is turned Off. mation from the WAAS satellite. Cannot obtain a differential position from WAAS. Cannot access Point of Interest, Street, or Intersection Find Lists. Cannot view a track being laid down on the map page when traveling. Cannot see the panning arrow on the Map Page easily. There is too much map clutter or the scale is such that map features are too densely displayed. Replace batteries. You must press and hold the POWER button for two seconds. a r y Move to a location with a clear view of the sky. Move to a location with a clear view and point the unit antenna in the direction of the satellite. Set system GPS to Normal and interface to other than RTCM. Wait 10-20 minutes for the initial col-

lection, then 1-2 minutes afterwards. Access the Map Setup Map option and activate the check box. Access the Tracks Page, highlight the ON button and press in on the CLICK STICK. Use the Map Page Setup Page to reduce map clutter or change the map scale. Cannot exit a menu or page by moving the CLICK STICK to Some menus and pages have an X

(Exit) on-screen button in the upper the left. right corner. Highlight the on-screen button and then press in on the CLICK STICK. The Rino is programmed to provide pop-up messages concerning operational characteristics and conditions. Press in on the CLICK STICK to acknowledge a message and return to the current feature. 69 190-00284-00_Prelim_FCC.indd 69 9/18/2003, 3:51:37 PM Appendix E Radio Troubleshooting To resolve problems that cannot be remedied using this guide, contact Garmin Customer Service at:

Guide Symptom 913-397-8200 or 800-800-1020 Probable Cause Remedy Radio not transmitting. TALK key may not be fully depressed. Press and hold TALK key in until Radio feature not set to On. done talking. Turn radio On. Messages not being received Incorrect channel/code setting. Out of by others radio range or obstructions. Limited talk range Natural or man-made obstructions can decrease range. Make sure other radios have the same channel and code set. Decrease distance between radios. Decrease distance between radios or obtain a better line of sight between radios. a r y You can hear others, but they cant hear you or you see an incoming transmission, but nothing is heard. Message garbled. Too many unwanted conversa-

tions being heard. Interference or static different code set. Youre on the same channel, but Too many user on channel or code is Scramble option is enabled (130 Only) P r e li m i n Obstructions in radio line of sight.. Interference from other electronics. Radios too far apart or too close Your view of the satellite is obstructed and a GPS x is not available, Send Location is off ; 10 seconds have not elapsed since last location transmission, set to zero. If you are using code zero, you will hear all transmissions on that chan-

nel. Use the same code (1-38) as the other party or use Scan to nd what code they are on. Both radios need to have this feature set the same. Switch to a different channel and/or use code other than zero (1-38). Keep radios at least 3 feet apart. Obtain better line of sight between radios. Shut off other devices or move away from interfering area. Move to a location with a clear view of the sky. Enable Send Location. Wait 10 seconds between location transmission. Enable GPS. Cannot transmit location. None of the keys except TALK Keylock is enabled Hold PAGE for 5 seconds to release will work. keylock.. or GPS is set to Off. The Rino is programmed to provide pop-up messages concerning operational characteristics and conditions. Press in on the CLICK STICK to acknowledge a message and return to the current feature. 70 190-00284-00_Prelim_FCC.indd 70 9/18/2003, 3:51:38 PM Appendix F Data Field De nitions The following data eld options are available on the Map, Navigation and Trip Computer Main Pages. Bearing - The direction from your current location to a destination. Course - The direction from your starting location to a destination. Current Destination - The next waypoint on your route. Current Distance - The remaining distance to your next waypoint. Current ETA - The estimated time of day you will arrive at your next waypoint. Current ETE - The estimated time needed to arrive at the next waypoint on your route. Elevation - The altitude (height) above or below sea level. Final Destination - The last waypoint on your route. Final Distance - The remaining distance to your nal destination. Final ETA - The estimated time of day you will reach your nal destination. Final ETE - The estimated time needed to reach your nal destination. GPS Accuracy - The estimated accuracy of the GPS signal. Heading - Your moving direction. Location (lat/lon) - Your current GPS position. Location (selected) - The lat/lon of point de ned on map. P r e li m i n a r y Maximum Speed - The maximum speed the unit has moved. Moving Avg. Speed - Average speed of the unit while moving. Odometer - A running tally of distance travelled, based upon the distance between second-by-second position readings. Off Course - The distance left or right you are from the original course (path of travel). Overall Avg. Speed - Your average speed. 71 190-00284-00_Prelim_FCC.indd 71 9/18/2003, 3:51:38 PM Appendix F Data Field De nitions Pointer - Indicates the direction to the next destination. Speed - Your rate of travel can be displayed in miles per hour, kilometers per hour, or nautical miles per hour. Sunrise - The time at which the sun rises on this day. Sunset - The time at which the sun sets on this day. Time of Day - The time for the selected time zone. To Course - The compass direction you must go in order to get back to the original course. Trip Odometer - A running tally of distance travelled since last reset. Trip Time - Moving - A running tally of movement time travelled since last reset. Trip Time - Stopped - A running tally of stopped time travelled since last reset. Trip Time - Total - A running tally of all travel time since last reset. Turn - The angle difference (in degrees) between the bearing to your destination and your current line of travel. L means turn Left. R means turn Right. Velocity Made Good - The speed at which you are closing on a destination along a desired course. Vertical Speed - Your rate of altitude gain/loss over time. a r y P r e li m i n 72 190-00284-00_Prelim_FCC.indd 72 9/18/2003, 3:51:39 PM Appendix G Wiring Diagram Cable View a r y Interface formats are selected from the Setup Interface Page on page 55 of this manual. See also page 68 for using the Rino with MapSource. The input/output lines on your Rino unit are RS-232 compatible, allowing easy interface to a wide range of external devices, including PCs, differential beacon receivers, marine autopilots and /or a second GPS receiver. The NMEA 0183 version 3.0 interface format is supported by the Rino and enables the unit to drive up to three NMEA devices. NMEA 0183 Version 3.0 Approved Sentences:

GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL, GPBOD P r e li m i n Garmin Proprietary Sentences:

PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude), PSLIB (beacon receiver control) DGPS (Differential GPS) corrections are accepted in RTCM SC-104 version 2.0 for-

mat through the Data In line. The Garmin GBR 21 and GBR 23 are the recommended beacon receivers for use with the Rino. Other beacon receivers with the correct RTCM format may be used, but may not correctly display status or allow tuning control from the GPS unit. The Rino may be hard-wired to a serial connector using a Data Only Cable. Refer to the wiring diagram and the Rino unit data connection illustrated below. The PC Interface Cable provided with this unit allows you to connect your Rino to a PC-compatible computers serial port. 73 190-00284-00_Prelim_FCC.indd 73 9/18/2003, 3:51:39 PM Appendix H Frequency Chart FRS Channel GMRS Channel Frequency 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 467.6875 467.7125 107.2 110.9 114.8 118.8 123 127.3 131.8 136.5 141.3 146.2 151.4 156.7 162.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Code 14 15 16 17 18 19 20 21 22 23 24 25 26 Frequency P r e li m i n Frequency NOTE: If you plan to purchase FRS radios from third party manufacturers be aware that there are CTCSS differences in some radios. Some of the tones on one radio may not be available on other radios. Charts showing the differ-

ent codes and manufactur-

ers can be located on the World Wide Web. Code 1 2 3 4 5 6 7 8 9 10 11 12 13 74 67 71.9 74.4 77 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100 103.5 Frequency 462.550 462.575 462.600 462.625 462.650 462.675 462.700 462.725 15 16 17 18 19 20 21 22 a r y Code 27 28 29 30 31 32 33 34 35 36 37 38 Frequency 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 190-00284-00_Prelim_FCC.indd 74 9/18/2003, 3:51:41 PM Index A Accessories.................................................. 67 Accuracy Circle ........................................... 15 Activate a Route .......................................... 43 Alarm Clock.....................................26-27, 58 Area Calculation Page.......................26-27, 61 Arrow, Panning............................................ 17 AutoZoom................................................... 19 B Backlight Timer........................................... 56 Backlighting On/Off .................................... 56 Battery Level Indicator .................................. 3 Battery Saver Mode...................................... 56 Battery Type........................................... 56, 66 Beacon Receiver Setup................................. 55 Bearing Pointer.................................21-22, 43 Big Compass................................................ 22 Big Numbers ............................................... 25 C Calculator Page ................................26-27, 58 Calendar Page ..................................26-27, 57 Call Button.......................................11, 62-63 Call Tone....................................................... 7 Cancel Goto .......................................... 16, 23 Cautions.................................................... iii-v Change Course Pointer Scale....................... 22 Channels ....................................2, 4, 6, 64-66 Cities, By Name........................................... 33 Cities, Nearest ............................................. 33 Codes, Squelch...........................2, 4, 6, 64-66 Compass Ring ............................................. 21 Contact Bar ........................................... 12, 14 Contact, Deleting ........................................ 30 Contact Details............................................ 12 Contact List........................................... 12, 32 Contact, New .........................................11-12 Contact, Proximity ...................................... 47 Contrast ...................................................... 56 Course Pointer ............................................ 22 D Data Fields ................................ 18, 22, 25, 44 Data Field De nitions.............................71-72 Date and Time Setup ................................... 51 Detail, Map.................................................. 19 Differential GPS (DGPS) .........................55-56 Display Mode .............................................. 19 P r e li m i n E Elevation .............................................. 18, 48 Exit Services...........................................33-34 Exits.......................................................33-34 Exits, Nearest .........................................33-34 F Fields, Data ............................... 18, 22, 25, 44 Find Address..........................................35-36 Find Cities................................................... 33 Find Contacts.............................................. 32 Find Exits...............................................33-34 Find Intersections...................................35-36 Find Last Found Place................................. 37 Find N Go Menu ........................26-27, 31-37 Find Points of Interest ............................34-35 Find Waypoints........................................... 32 Frequency Chart.......................................... 74 G a r y Games Page.................................26-27, 62-63 Global Positioning System (GPS)............ iii, 48 GMRS License ...........................................ii-iii GMRS Radio.................................... 2, 4, 8, 64 Goto............................................................ 38 Goto Line .................................................... 19 H Heading Selection........................................ 54 Headset Type..............................................7-8 Hunt and Fish Page..........................26-27, 60 I Informational Picture............................2, 9-10 Initialization................................................ 48 Interface Page.............................................. 55 K Keylock ......................................................... 2 L Location (Marking).................................28-29 Loading Map Data ................................. 55, 68 Lock On Road ............................................. 19 M Main Menu Page.....................................26-27 75 190-00284-00_Prelim_FCC.indd 75 9/18/2003, 3:51:42 PM Index Map Datums...........................................52-53 Map Display ................................................ 14 Map Features......................................... 15, 19 Map Page................................................14-20 Map Page Options ....................................... 16 Map Page Panning..................................16-17 Map Page Setup.................................16,19-20 Map Scale.................................................... 15 MapSource Map Data ...................... 19, 55, 68 Mark a Waypoint................................... 28, 29 Mark Waypoint Page ..............................26-28 Measuring Between Waypoints.................... 20 Monitor .....................................................5-6 Moving a Route Waypoint ......................42-43 My ID...................................................3-4, 11 N Navigation Page......................................21-23 Nearest (Waypoints, Cities, Exits, etc.) ...31-36 New Contact Page ..................................11-12 NMEA ................................................... 55, 66 Normal Mode.............................................. 56 North Reference .......................................... 54 North Up .............................................. 19, 50 O Odometer...............................................24-25 Offset (Time)............................................... 51 Orient Map.................................................. 19 Overall Average Speed................18, 24-25, 72 P r e li m i n P Page Sequence Setup ................................... 26 Panning (Map) .................................16-17, 28 Peer-to-peer....................................... 8, 11, 13 Position Format......................................52-53 Projecting a Point ........................................ 30 Proximity Page .................................26-27, 47 R Radio Page................................................2-13 Radio Page Setup........................................7-8 Reset Trip Page .......................................24-25 Ring Tone...................................................... 7 Roger Tone .................................................... 7 76 Routes ....................................................39-44 Creating.................................................. 39 Copying.................................................. 40 Deleting .................................................. 40 Naming................................................... 40 Editing...............................................40-42 Inverting................................................. 40 Navigating .........................................43-44 Route Map Page .................................42-43 S Satellite Page ...............................26-27, 48-50 Saving the Tracklog ................................45-46 Scan ...........................................................5-6 Scanlist.......................................................... 6 Scramble (Voice) ..................................... 8, 13 Selecting a Page........................................... 26 Send Location ................................... 8, 11, 13 Serial Number ............................................ vii Setup Page...................................26-27, 51-56 Show Contact Bar........................................ 16 Show Data Fields Bar................................... 16 Show Map Only .......................................... 16 Software Version (Operating)....................... 56 Speci cations .............................................. 66 Stop Navigation..................................... 16, 23 Stopwatch Page ................................26-27, 59 Sun and Moon Page..........................26-27, 60 Symbol, User .......................... 3, 4, 11, 13, 63 Symbol, Waypoint ................................ 28, 30 Symbols, Status Bar ...................................... 3 System Setup............................................... 56 a r y T Talk Button.......................................11, 62-63 Text Size................................................ 16, 19 Time Format ............................................... 51 Time Zone................................................... 51 TracBack.................................................45-46 Track Logs........................................19, 45-46 Track Log Saving ......................................... 46 Track Log Setup........................................... 46 Tracks Page..................................26-27, 45-46 Track Up ............................................... 19, 50 Trip Computer Page ...............................24-25 Trip Odometer....................................... 24-25 Trip Time ...............................................24-25 Troubleshooting .....................................69-70 190-00284-00_Prelim_FCC.indd 76 9/18/2003, 3:51:43 PM Index a r y Turning the GPS Receiver Off ..................... 7 Turning the Radio Off................................. 7 U Unit Features........................................... 1, 66 Units of Measure ....................................52-53 Units Page ..............................................52-53 User Symbol............................ 3, 4, 11, 13, 63 UTC Offset.................................................. 51 V Vibrate .......................................................... 7 View Waypoints on Route ............................. 9 VOX Level..................................................... 8 W WAAS, Enable/Disable................................. 56 Warnings................................................... iii-v Waypoints ....................................................... Deleting .................................................. 30 Editing.................................................... 30 List ......................................................... 32 Marking.................................................. 29 Naming................................................... 29 Projecting ............................................... 30 Proximity................................................ 47 Sending ........................................ 8, 11, 13 Symbols............................................ 28, 30 What is FRS ...........................................64-65 Wiring Diagram (Interface).......................... 73 P r e li m i n Z Zooming In/Out ......................................... 15 Zoom Ranges............................................... 15 190-00284-00_Prelim_FCC.indd 77 9/18/2003, 3:51:44 PM 77 For the latest free software updates throughout the life of your Garmin products, visit the Garmin web site at www.Garmin.com a r y P r e li m i n 2003 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00284-00 Rev. A 190-00284-00_Prelim_FCC.indd 78 9/18/2003, 3:51:44 PM