FCC ID: IPH-04150 LinkCard

IXWW22

Quick Guide

Product Outline

Main Characteristics

Operating temperature

range

Input voltage

Maximum Operating

Current

From -30° to 80°C

From 9 to 16V

400mA @12V

Memory

External Flash

External RAM

64MB(512Mb)

16MB(128Mb)

Description

IXWW22 is a PCB module with a 4.2“ color TFT to

display infotainment vehicle data via CAN and

navigation information from smartphone app via

Bluetooth .

Bluetooth

Bluetooth v2.1+EDR, v4.2 BLE,

Support SPP profile

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of

the following measures:

-Reorient or relocate the receiving antenna

-Increase the separation between the equipment and

receiver.

-Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV

technician for help.

FCC Caution: Any changes or modifications not

expressly approved by the party responsible for

compliance could void the user's authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

RF exposure warning

End-users and installers must be provide with antenna

installation instructions and transmitter operating

conditions for satisfying RF exposure compliance.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian

ICES-003 and RSS-210.

Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this

device must accept any interference, including

interference that may cause undesired operation of the

device.

Canada, avis d'Industry Canada (IC)

Cet appareil numérique de classe B est conforme aux

normes canadiennes ICES-003 et RSS-210.

Son fonctionnement est soumis aux deux conditions

suivantes : (1) cet appareil ne doit pas causer

d'interférence et (2) cet appareil doit accepter toute

interférence, notamment les interférences qui peuvent

affecter son fonctionnement.

Industry Canada statement

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-

exempt RSS(s). Operation is subject to the following

two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including

interference that may cause undesired operation of

the device

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is

below the Industry Canada (IC) radio frequency exposure

limits. The Wireless Device should be used in such a

manner such that the potential for human contact during

normal operation is minimized.

Informations concernant l'exposition aux fréquences

radio (RF)

La puissance de sortie émise par l’appareil de sans fil est

inférieure à la limite d'exposition aux fréquences radio

d'Industry Canada (IC). Utilisez l’appareil de sans fil de

façon à minimiser les contacts humains lors du

fonctionnement normal.

FCC ID: IPH-04150

Date: July 19, 2021

Federal Communications Commission

Authorization and Evaluation Division

Confidentiality Request

Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of

information accompanying this Application as outlined below:

Type of Confidentiality Requested

Exhibit

☐ Short Term

☐ Short Term

☐ Short Term

☐ Short Term

☒ Permanent

☒ Permanent

☐ Permanent

☐ Permanent

☒ Permanent

Block Diagrams

External Photos

Internal Photos

Tune-Up Procedure

Schematics

Test Setup Photos

User’s Manual

Operation Description/Theory of Operation

Parts List & Placement/BOM

The above materials contain trade secrets and proprietary information not customarily released to the public. The public

disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors.

The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation

will not be made before the date of the Grant for this application.

Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review

due to materials that contain trade secrets and proprietary information not customarily released to the public

Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of

180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature

release of sensitive information prior to marketing or release of the product to the public.

Sincerely,

William H. Pertner /Compliance Team Leader

Garmin International Inc

Modular Approval Request FCC (KDB 996369 D01 & Part 15.212)

FCC ID: __IPH-04150___

Items to be covered by Single modular transmitters.

1. The modular transmitter must have its own RF shielding.

Answer from applicant

YES

YES

YES

YES

YES

YES

2. The modular transmitter must have buffered modulation/data inputs (if such inputs

are provided) to ensure that the module will comply with Part 15 requirements

under conditions of excessive data rates or over-modulation.

3. The modular transmitter must have its own power supply regulation.

4. The modular transmitter must comply with the antenna requirements of Section

15.203 and 15.204(b)(c). The antenna must either be permanently attached or

employ a “unique” antenna coupler (at all connections between the module and the

antenna, including the cable).

5. The modular transmitter must be tested in a stand-alone configuration, i.e., the

YES

module must not be inside another device during testing. This is intended to

demonstrate that the module is capable of complying with Part 15 emission limits

regardless of the device into which it is eventually installed.

6. The modular transmitter must be equipped with either a permanently affixed label

or must be capable of electronically displaying its FCC identification number in

accordance with 15.212 (a)(1)(vi)(A) / (B).

YES

8.

there are very strict operational and

7. The modular transmitter must comply with any specific rule or operating

requirements applicable to the transmitter and the manufacturer must provide

adequate instructions along with the module to explain any such requirements. A

copy of these instructions must be included in the application for equipment

authorization. For example,

timing

requirements that must be met before a transmitter is authorized for operation under

Section 15.231. For instance, data transmission is prohibited, except for operation

under Section 15.231(e), in which case there are separate field strength level and

timing requirements. Compliance with these requirements must be assured.

The modular transmitter must comply with any applicable RF exposure

requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and

specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and

15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices

perform routine environmental evaluation for RF Exposure to demonstrate

compliance. In addition, spread spectrum transmitters operating under Section

15.247 are required to address RF Exposure compliance. Modular transmitters

approved under other Sections of Part 15, when necessary, may also need to

address certain RF Exposure concerns, typically by providing specific

installation and operating instructions for users, installers and other interested

parties to ensure compliance.

Applicant/Agent name:

Applicant/Agent title:

Applicant/Agent Signature:

Frank Yen

GMA Specialist

Date:

2021/09/01

Dec. 11, 2020 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

Innovation, Science and Economic Development Canada Certification and Engineering Bureau 3701 Carling Avenue PO Box 11490, Station H Ottawa, Ontario, Canada K2H 8S2 Pursuant to 47 CFR 2.911, Garmin International, Inc. (Garmin) has authorized the following Garmin International Associates to act on Garmin's behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) and Innovation, Science and Economic Development Canada (ISED) for equipment authorization or certification. Ms. Poojita Bhattu, Compliance Engineer Mr. Doug Burroughs, Senior Compliance Engineer Mr. Jeffrey Hailey, Staff Compliance Engineer Mr. Dan Irish, Senior Compliance Engineer Mr. Ben Karsak, Compliance Engineering Team Lead Mr. Kiran Kumar, Senior Compliance Engineer Mr. Tim Olson, Senior Compliance Engineer Mr. Carlos Ortega, Senior Compliance Engineer Mr. William Pertner, Compliance Engineering Team Lead Mr. Cody Riggle, Compliance Engineer Mr. David Utt, Staff Compliance Engineer Mr. Jonathan Shafer, Senior Design Certification Engineer Ms. Sara Jones, Design Certification Engineer 2 Mr. Jay Everett, Team Leader, System Validation As such, the Garmin Associates listed above are authorized to: 1) sign Form 731, 2) sign letters of application, 3) request confidentiality, and 4) exchange data and information with the FCC, IC and/or authorized TCBs on behalf of Garmin. In addition, these individuals shall be considered "authorized individuals" to act on Garmin's behalf where an "authorized individual's"

attestation is necessary or preferred. This authorization remains in effect until notified to the contrary by Garmin. Sincerely, Mr. Douglas Kealey, Manager Environmental and Regulatory Affairs