TM Wireless System with Wireless Technology Users Guide 1 Each Z-Lynk Wireless System Includes:
WT-1 wireless transmitter WR-1 wireless receiver Mounting strap Carrying case
(not shown) 2 Two USB charging cables
" headphone jack cable Simply Faster: Garrett Z-Lynk Technology Garretts Z-Lynk Wireless System offers all the benefits of using your favorite headphones, along with the freedom from being tethered to your metal detector. Z-Lynk technology is designed for a near-zero delay from your detector to your headphones. The Garrett Z-Lynk Wireless System operates with a 17-millisecond delaysix times faster than Bluetooth. This means you are hearing your target signal while the searchcoil is directly over the target, helping you to pinpoint and recover your targets more accurately. prevent interference with nearby headphones and other wireless devices. Frequency-hopping technology creates an infinite number of channels to Compatability Z-Lynk can be used with both VLF and pulse metal detectors. These modules can be paired with any Garrett wireless-enabled device. This wireless system is nearly universal, designed to work with almost any brand of metal detector and almost any wired headphone. Regulatory This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any modifications to this equipment without the approval of the manufacturer will void the users authority to operate the equipment. This product complies with license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference including interference that may cause undesired operation of this device. Ce produit est conforme avec Industrie Canada, exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) ce dispositif ne peut pas provoquer dinterfrences et (2) cet appareil doit accepter toute interfrence y compris les interfrences qui peuvent causer un mauvais fonctionnement de ce dispositif. Industry Canada 2 3 Installation:
Use mounting strap to secure WT-1 transmitter unit to detector. Plug WT-1 into detectors headphone jack. Note: Optional 2-pin AT cable required for Garrett All Terrain products. Plug headphones with jack into WR-1 receiver unit. The WR-1 can then be clipped to your belt or digging pouch or slipped into your pocket to protect it from weather. 4 5 Press and hold power button ( ) for 1 second to switch ON or OFF. Note: WT-1 will switch on when it receives detector audio. Modules will automatically switch off after 10 minutes without a paired mate, or after 30 minutes of inactivity. Adjust with WR-1 volume control buttons. If using volume-control headphones, set headphones to full volume, and then adjust WR-1 to maximum desired level. While hunting, additional adjustments can be made with headphone volume controls. Switch both modules on, bring within 3 feet (1 meter) of each other, and then quickly press and release the power button on WT-1 (TX module). The modules will remain paired until you choose to pair them with another Z-Lynk device. Plug the supplied charging cables into the modules and any standard USB port to recharge. Instructions Power On/Off Volume Pairing Recharging LED Indicators Battery indicator ( ) begins blinking when there are approx. 3 hours remaining. Battery indicator LED displays solid light while charging and is off when complete. Pairing indicator ( ) will blink slowly when not paired;
will blink quickly during pairing search; and will remain steady when paired. Caution The WR-1 unit is weather resistant in light rain; the WT-1 unit will tolerate heavier rain. The Z-Lynk modules should never be submerged. 6 Specifications 1627100, Garrett Z-Lynk Wireless System 17 milliseconds (ms); 6x faster than Bluetooth 20 kHz (high fidelity) 2.4 GHz with frequency-hopping, prevents crosstalk Up to 30 hours, both modules 5 hours from any standard USB port Water resistant; do not submerge. WR-1 unit: IP 52: protects against light rain. WT-1 unit: IP 64: protects against heavy rain. 2 year, limited parts and labor FCC, CE, IC Model Number:
Audio Delay:
Audio Bandwidth:
Radio Frequency:
Battery Life:
Recharge Time:
Environmental:
Warranty:
Certifications:
Operating Temperature: -20 (-4 F) to 60 C (140 F) Compatible with nearly any brand and model of VLF and pulse detectors. Compatible with any Garrett Z-Lynk device. Compatible with nearly any wired headphone. Accessory:
PN 1627410 Z-Lynk headphone cable with 2-pin AT connector MADE IN THE USA Garrett Metal Detectors, garrett.com, and Z-Lynk are trade-
marks and registered trademarks of Garrett Electronics Inc. g a r r e t t . c o m 2016 Garrett Metal Detectors. 1539400.A.1216 7 Warranty Your Z-Lynk Wireless System is warranted for 24 months, limited parts and labor. Damage caused by alteration, modification, neglect, accident or misuse is not covered. See complete Warranty Information details on Garretts website: www.garrett.com. In the event you encounter problems with your Z-Lynk modules, please read through this Users Guide carefully to ensure the system is not inoperable due to a pairing issue. In the event that repairs or warranty service are necessary for your Z-Lynk system, contact the local retail outlet where it was purchased. To avoid excessive shipping and import charges, customers outside the United States should not return a Garrett product directly to the factory. Information on international warranty/repair needs can be found on the Garrett website: www.garrett.com. Click on the Sport Division and then the Technical Support page for more details. 8 9