FCC ID: 2ADQO3SB3350N3 Bluetooth&Wi-Fi dual band Communication Module

IoT Midea IoT Module User Mannual Manufacturer name: GD Midea Air-Conditioning Equipment Co.,Ltd Module name: Bluetooth & Wi-Fi dual band Communication Module Model specification: MM3SB3350N3 Material code: MM3SB3350N3 Preparation: zhanghaixiang Sign: zhouyuliang, liuyali Review: chenting This document is confidential, and all information contained in it shall be interpreted by midea IoT company. All unauthorized and permitted copying shall not be recognized and prohibited. Midea IoT Address: 3rd floor, building 4, midea global innovation center, beijiao town, shunde district, foshan city, guangdong province Tel:

1 / 20 IoT 1 Product Overview .......................................................................................................... 3 2 Top view ........................................................................................................................... 5 3 Radio frequency characteristics ................................................................................. 7 3.1 transmission and reception characteristics ...................................................... 7 3.2 characteristics of the module antenna ............................................................ 13 4. Product structure diagram ............................................................................................ 14 4.1 PCB size .................................................................................................................... 14 4.2 line drawings .......................................................................................................... 15 4.3 label requirements ................................................................................................ 15 5. Power consumption description.................................................................................. 17 6. Electrical parameters ....................................................................................................... 18 7. Compliance with standards and certification .......................................................... 19 8. Precautions for use .......................................................................................................... 19 Index 2 / 20 IoT 1Product Overview MM3SB3350N3 wireless module is a fully functional, highly integrated, low power consumption dedicated Wi-Fi & bluetooth module for the Internet of things. It supports IEEE802.11a/b/g/n protocol, also embedded IPV4, TCP, UDP, DNS, HTTP and other complete network protocol, so that the terminal in the Internet of things applications more reliable, convenient and easy to use. MM3SB3350N3 core chip adopts the MT7697D single chip scheme of Media corp. The chip is highly integrated with CPU, PMU, RAM, T/R SW, LNA, PA and other major parts, thus greatly reducing the power consumption of the whole machine. The module adopts the integrated three-dimensional metal antenna design, which can not only reduce the cost of the antenna for customers, but also save the assembly space of the antenna, greatly reduce the area of the board, and make the product more competitive. At present, the module provides a complete serial port interface function to communicate with the device, and can connect the cloud and the device through the serial port and the mobile client. The module has the following characteristics:

Support IEEE 802.11a/b/g/n protocol Supports 20MHz and 40MHz bandwidth in the 2.4ghz band and 5GHz band Support bluetooth BLE 4.2 The module has a built-in dual-mode metal antenna Low power listening mode Both up and down theoretically support a connection rate of 150Mbps Support encryption protocols: WFA, WPA, WPA2, WPS2.0 Support IPV4, TCP, UDP, DNS, HTTP and other network protocols 3 / 20 IoT The block diagram of the module is as follows:

Note/FCC warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 4 / 20 Bluetooth RF UART x 1 SPI Flash controller PMU SPI Flash 25 Channel Generic DMA Bluetooth Baseband Bluetooth link Controller Bluetooth Audio CODEC Wi-Fi dual-

band RF Wi-Fi baseband Wi-Fi MAC Wi-Fi PSE EFUSE

(4Kb) TCM/Cache 96KB IrDA ILM/DLM SRAM/ROM N9 CPU CM4 SYSRAM 256KB ARM Cortex M4F GPIO/PWM x 28 I2C x 2 SYSRAM Crypto Engine SPI Watch Dog Timer I2S General Purpose Timer 4 Channel ADC N9 Subsystem M4 Subsystem IoT interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. MODIFICATION:

Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the device. Because the working frequency of the device is in 5150-5250 MHZ, so this module is suitable for indoor use of the equipment. This equipment must be installed to provide a separation distance of at least 20cm from all persons. 2Top view Positive figure 5 / 20 IoT On the back of the figure 6 / 20 IoT 3Radio frequency characteristics 3.1 transmission and reception characteristics Support IEEE 802.11a/b/g/n standard; For parameters such as transmitting power, receiving sensitivity, EVM and distribution, a more stringent standard than the IEEE specification is sought. Please refer to the attached table for the specifications. Table 1: Wi-Fi 2.4ghz Band RF Specifications TX Characteristics Min. Typ. Max. The Unit 1. The Frequency range 2400

2483.5 MHz 2. The Output power 1 Mbps CCK 11 Mbps CCK 6 Mbps OFDM 54 Mbps OFDM HT20, MCS0 HT20, MCS7 HT40, MCS0 HT40, MCS7 3. The TX EVM entry 6 Mbps OFDM 54 Mbps OFDM HT20, MCS 0 HT20, MCS 7 HT40, MCS 0 HT40, MCS 7 dBm dBm dBm dBm dBm dBm dBm dBm

- 5 The dB

- 25 The dB

- 5 The dB 27 -

The dB

- 5 The dB 27 -

The dB 16 16 15 13 15 13 15 13 7 / 20 RX Characteristics Min. Typ. Max. The Unit IoT 1. The Frequency range 2400 2483.5 MHz 2. Minimum Input Level Sensitivity 1) 1 MBPS (FER) 8% CCK 2) 2 MBPS (FER) 8% CCK 3) 5.5 Mbps (FER) 8% CCK 4) 11 MBPS (FER) 8% CCK 5) BPSK rate 1/2, 6 Mbps OFDM 6) BPSK rate 3/4, 9 Mbps OFDM 7) QPSK rate 1/2, 12 Mbps OFDM 8) QPSK rate 3/4, 18mbps OFDM 9) 16QAM rate 1/2, 24mbps OFDM 10) 16QAM rate 3/4, 36 Mbps OFDM 11) 64QAM rate 1/2,48mbps OFDM 12) 64QAM rate 3/4, 54mbps OFDM 3. RX Sensitivity BW=20MHz Mixed mode 800ns Guard Interval non-stbc 1)MCS 0, BPSK rate 1/2 2)MCS 1, QPSK rate 1/2 3)MCS 2, QPSK rate 3/4 4)MCS 3, 16QAM rate 1/2 5)MCS 4, 16QAM rate 3/4 6)MCS 5, 64QAM rate 2/3 7)MCS 6, 64QAM rate 3/4 8)MCS 7, 64QAM rate 5/6 1)MCS 0, BPSK rate 1/2 2)MCS 1, QPSK rate 1/2 3)MCS 2, QPSK rate 3/4 4)MCS 3, 16QAM rate 1/2 4. RX Sensitivity BW=40MHz Mixed mode 800ns Guard Interval

- 82.

- 80.

- 78.

- 76.

- 82.

- 81.

- 79.

- 77.

- 74.

- 70.

- 66.

- 65.

- 82.

- 79.

- 77.

- 74.

- 70.

- 66.

- 65.

- 64.

- 79.

- 76.

- 74.

- 71. 8 / 20 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm IoT Table 2: Wi-Fi 5GHz Band RF Specifications TX Characteristics Min. Typ. Max. The Unit 1. The Frequency range 5150 5850 MHz 5)MCS 4, 16QAM rate 3/4 6)MCS 5, 64QAM rate 2/3 7)MCS 6, 64QAM rate 3/4 8)MCS 7, 64QAM rate 5/6 5. Maximum Input Level (FER = 10%) 6 Mbps OFDM 54 Mbps OFDM The MCS 0 The MCS 7 2. The Output power 3. The TX EVM entry 6 Mbps OFDM 54 Mbps OFDM HT20, MCS0 HT20, MCS7 HT40, MCS0 HT40, MCS7 6 Mbps OFDM 54 Mbps OFDM HT20, MCS 0 HT20, MCS 7 HT40, MCS 0 HT40, MCS 7

- 67.

- 63.

- 62.

- 61.

- 20

- 20

- 20

- 20

16 15 16 15 16 15 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm

- 5 The dB

- 25 The dB

- 5 The dB 27 -

The dB

- 5 The dB 27 -

The dB RX Characteristics Min. Typ. Max. The Unit 9 / 20 IoT 1. The Frequency range 5150 5850 MHz 2. Minimum Input Level Sensitivity 1) BPSK rate 1/2, 6 Mbps OFDM 2) BPSK rate 3/4, 9 Mbps OFDM 3) QPSK rate 1/2, 12 Mbps OFDM 4) QPSK rate 3/4, 18mbps OFDM 5) 16QAM rate 1/2, 24mbps OFDM 6) 16QAM rate 3/4, 36 Mbps OFDM 7) 64QAM rate 1/2,48mbps OFDM 8) 64QAM rate 3/4, 54mbps OFDM 3. RX Sensitivity BW=20MHz Mixed mode 800ns Guard Interval non-stbc 4. RX Sensitivity BW=40MHz Mixed mode 800ns Guard Interval 1)MCS 0, BPSK rate 1/2 2)MCS 1, QPSK rate 1/2 3)MCS 2, QPSK rate 3/4 4)MCS 3, 16QAM rate 1/2 5)MCS 4, 16QAM rate 3/4 6)MCS 5, 64QAM rate 2/3 7)MCS 6, 64QAM rate 3/4 8)MCS 7, 64QAM rate 5/6 1)MCS 0, BPSK rate 1/2 2)MCS 1, QPSK rate 1/2 3)MCS 2, QPSK rate 3/4 4)MCS 3, 16QAM rate 1/2 5)MCS 4, 16QAM rate 3/4 6)MCS 5, 64QAM rate 2/3 7)MCS 6, 64QAM rate 3/4 8)MCS 7, 64QAM rate 5/6

- 82.

- 81.

- 79.

- 77.

- 74.

- 70.

- 66.

- 65.

- 82.

- 79.

- 77.

- 74.

- 70.

- 66.

- 65.

- 64.

- 79.

- 76.

- 74.

- 71.

- 67.

- 63.

- 62.

- 61. 10 / 20 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm IoT 5. Maximum Input Level (FER = 10%) 6 Mbps OFDM 54 Mbps OFDM The MCS 0 The MCS 7 dBm dBm dBm dBm Table 3: Blutooth LE RF Specifications TX Characteristic Min. Typ. Max. The Unit 1. The Frequency range 2400

2483.5 MHz 2. The Output power 10 dBm 3. Carrier Frequency Offset and Drift 1) the Frequency Offset

- 150. 150 KHz 4. The Modulation Characteristic 2) Frequency Drift 3) Max Drift Rate Delta f1avg Delta f2max Delta f1avg/delta f2avg 0.8 0.94 5. The In - band Spurious Emission Plus or minus 2 m Offset

> plus or minus 3 MHZ offset 50 20 KHz Hz/us 275 KHz KHz Hz/Hz

- 20 dBm

- 30 dBm

- 20

- 20

- 20

- 20 0

- 50

- 20 225 185 RX Characteristic Min. Typ. Max. The Unit 1. The Frequency range 2400

2483.5 MHz 2. The Receiver Sensitivity 3. The C/I Co - channel 4. The C/I 1 MHZ 5. C/I 2 MHZ

- 95. 6 7 -

21 15 dBm The dB The dB

- 30

- 17 The dB 11 / 20 IoT 6. The C/I 3 MHZ or higher

- 33 27 -

The dB 7. C/I Image channel

- 20 9 -

The dB 8 C/I Image 1 MHZ

- 30

- 15 The dB 9. Intel - modulation

- 50

- 35

- 30

- 35

- 35

- 30 dBm dBm dBm dBm dBm 10. Out-of-band blocking 30 MHZ to 2000 MHZ 2001 MHZ to 2339 MHZ 2501 MHZ to 3000 MHZ 3001 MHZ to 12.75 GHz 12 / 20 IoT 3.2 characteristics of the module antenna The passive performance of the antenna of the Wi-Fi & Bluetooth module should meet the following requirements (passive performance can only be used as a reference, and the antenna performance test is mainly based on the active throughput test) :

In 2.4g frequency band: 2400MHz~ 2483.5mhz parameter And 5G frequency band: 5150MHz~5850MHz in the Return loss The efficiency of requirements

< - 10 db

> 40%

13 / 20 IoT 4. Product structure diagram 4.1 PCB size Thickness of module plate: 1.0mm Tolerance: + / - 0.2 mm 14 / 20 4.2 line drawings IoT The serial num ber 1 2 3 4 tag Wi-Fi module end pin description Home appliance end pin description V R T The VCC power supply RXD module receives TXD module send GND symbol GND to The VCC power supply TXD appliance delivery Reception of RXD appliances GND to 4.3 label requirements 15 / 20 Label printing requirements:

Label size is 21*14mm, label material is white, Song typeface; The dimension of the QR code is 8*8mm. IoT QR code content:

The content of the QR code is shown in the following table. QR code content Characters in length note 4 Fixed content as "MAC:"

12 Fixed as "XXXXXXXXXXXX"

Field The initial code The MAC address If the content is less than 26 characters, fill in the front with the character "X"

Factory code (2 a) + job number (8) + production date (6th) + small software version number (6) +

enterprise code (4 digits) : "01 xxxxxxxx1608020001090000"

Production information 26 Software version number 12 Fixed as " 050808011944"

16 / 20 IoT The power supply current 4 5 Fixed content as "3.3v" or "5.0v"

Fixed content as "500mA"

Note:

Starting code (4 bits) : MAC:

MAC address (12 bits) : XXXXXXXXXX Production information (bit 26) : 01 XXXXXXXX 160919 000109 0000 Position 1 and 2: represent the manufacturing plant Position 3-10: represents the job number of the manufacturing plant Bit 11~16: production date, such as September 19, 2016 marked 160919 Bits 17 to 22: software minor version Numbers No. 23-26: enterprise code, midea's internal business department is "0000"

Non-american enterprise code according to the software code. Software version (12 bits) : 050808011944 Power supply (4-bit) : working voltage of the module Current (5 bits) : 500mA 5. Power consumption description The State current in 2 min The Average

(mA) Peak current (mA) Max current in 2 Min current in 2 in min (mA) Min (mA) Idle 80 or less 100 or less 100 or less 80 or less The STA 100 or less 800 or less 800 or less 80 or less AP 100 or less 800 or less 800 or less 80 or less 17 / 20 IoT 6. Electrical parameters Power supply parameters:

Under 5V working power supply:

input

(ripple control within 100mv) 3.3v Operating Power:

Symbol parameter The Typical The unit minimum values maximum value VDD The power 4.5 5 5.5 V Symbol parameter The Typical The unit minimum values maximum value VDD The power 3.135 3.3 3.465 V input

(ripple control within 100mv) Communication serial port level parameters:

Under 5V working power supply:

Symbol parameter The Typical The unit minimum values maximu value m VIH High Level Input Voltage 4.5 5 VDD V 18 / 20 IoT VIL Low Level Input Voltage 0.3 VOH High Level Output Voltage 4.5 5.0 VDD VOL Low Level Output Voltage 0

0.3 0.4 m 0.3 0.4 V V V V V V V 3.3v Operating Power:

Symbol parameter The Typical The unit minimum values maximu value VIH High Level Input Voltage 3.135 3.3 VDD VIL Low Level Input Voltage 0.3 VOH High Level Output Voltage 3.135 3.3 VDD VOL Low Level Output Voltage 0 7. Compliance with standards and certification The Wi-Fi & Bluetooth module shall be certified by the state radio administration of the ministry of industry and information technology of the People's Republic of China. 8. Precautions for use The Wi-Fi & Bluetooth module exposed in the air (the core board inside the module or the whole composed of the core board and the base board) shall at least meet the service environmental conditions of general consumer electronic products, including but not limited to:

Working temperature: - 20 ~ 75 19 / 20 IoT Storage temperature: - 20 ~ 75 Working humidity: 0~95 %RH Storage humidity: 0~98 %RH Tolerance - 20 / + 75 , every 2h a cycle, thermal shock, under the impact of the cycle of at least 20 don't appear dysfunction or performance degradation, no significant tin crack phenomenon. When working for a long time, the temperature rise of the circuit components should meet the requirements of their own specifications. To simulate the transportation process and home application scenarios, the module should be able to withstand a certain degree of mechanical impact and drop. Through certain protective means, Wi-Fi & Bluetooth module can have higher environmental adaptability. When designing a Wi-Fi & Bluetooth module, the performance, size and process margin required for the implementation of protection measures should be reserved. 9. label statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter module FCC ID: 2ADQO3SB3350N3. 20 / 20

Power:DC 3. 3V/500mA Mode 1 : MM3SB3350N3 FCC ID:2ADQ03SB3350N3 MAC : XXXXXXXXXXXX GD Midea Air-onditioning Equipment Co.,Ltd IW - - - 44 4 Power: DC 33V/S00mA Model: MM3SB3350N3 FCC ID: 2ADQO3SB3350N3 MAC: XXX20000000 GD Midea Air-Conditioning Equipment Co,Ltd Pe eee title ETAT

GD Midea Air-Conditioning Equipment Co.,Ltd Federal Communications Commission 2020-06-12 Oakland Mills Road Columbia MD 21046 ModelMM3SB3350N3 FCC ID: 2ADQO3SB3350N3 Subject: Software security requirements for U-NII device. The information within this section of the Operational Description is to show compliance against the Software Security Requirements laid out within KDB 594280 D02 U-NII Device Security v01r03. General Description 1. Describe how any software/firmware update will be obtained, downloaded, and installed. Software that is accessed through manufacturers website or devices management system, must describe the different levels of security. 2. Describe all the radio frequency parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited, such that, it will not exceed the authorized parameters?

The software/firmware will be obtained by the factory for production. The updates will not be obtained by the distributor. The software/firmware is a compiled binary, not readable, and no parameters can be changed after the file has been created. The upgrade program verifies the checksum of the binary and installs only if it's a valid one. The upgrade process proceeds automatically once user accepts to update and install. RF Parameters are determined by the binary image. The user cannot modify RF parameters. Checksum is used to verify the software/firmware is valid. SFTP for image transmission 3. Describe in detail the authentication protocols that are in place to ensure that the source of the software/firmware is legitimate. Describe in detail how the software is protected against modification. 4. Describe in detail the verification protocols in place to ensure that installed software/firmware is legitimate. 5G Wi-Fi Declaration Letter GD Midea Air-Conditioning Equipment Co.,Ltd 5. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation?

The device acting as a master only operate in UNII-

1 and UNII-3 bands and choice one legal channel randomly. And it acting as a client operate in UNII-

1,UNII-2A,UNII-2C and UNII-3 bands 3rd Party Access Control 1. Explain if any third parties have the capability to operate a U.S.-sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. No third parties have the capability to operate this device on any regulatory domain frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the United States Third-party software installation is not permitted on the device. 2. Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are in place with providers of third-party functionality to ensure the devices underlying RF parameters are unchanged and how the manufacturer verifies the functionality. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that hosts manufactures fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter parameters are not modified outside the grant of authorization. SOFTWARE CONFIGURATION DESCRIPTION 1. To whom is the UI accessible? (Professional installer, end user, other.) 5G Wi-Fi Declaration Letter The software is fixed at the factory before sale to host manufactures , host manufacture can't change the software setting. None of the mentioned parameters are viewable, thus not configurable (frequency of operation, power settings, antenna types, DFS settings, receiver thresholds, or country code settings. GD Midea Air-Conditioning Equipment Co.,Ltd a) What parameters are viewable to the professional installer/end-user?

No parameters are accessible or modifiable by any parties. b) What parameters are accessible or modifiable to the professional installer?

No parameters are accessible or modifiable by professional installers or system integrators. i) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized?

ii) What controls exist that the user cannot operate the device outside its authorization in the U.S.?

c) What configuration options are available to the end-user?

None of the mentioned parameters are adjustable or viewable. None of the mentioned parameters are adjustable or viewable, thus not configurable. None of the mentioned parameters are adjustable or viewable, thus not configurable (frequency of operation, power settings, antenna types, DFS settings, receiver thresholds, or country code settings). i) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized?

Yes ii) What controls exist that the user cannot operate the device outside its authorization in the U.S.?

None of the mentioned parameters are adjustable or viewable, thus not configurable (frequency of operation, power settings, antenna types, DFS settings, receiver thresholds, or country code settings ). Yes. It cannot be changed in UI. None of the mentioned parameters are adjustable or viewable, thus not configurable (frequency of operation, power settings, antenna types, DFS settings, receiver thresholds, or country code settings). The previously used settings will be loaded. The radio cannot be operated in bridge or mesh mode. d) Is the country code factory set? Can it be changed in the UI?

i) If so, what controls exist to ensure that the device can only operatewithin its authorization in the U.S.?

e) What are the default parameters when the device is restarted?

2. Can the radio be configured in bridge or mesh mode? If yes, an attestation may be required. Further information is available in KDB Publication 905462 D02. 5G Wi-Fi Declaration Letter GD Midea Air-Conditioning Equipment Co.,Ltd The device acting as a master only operate in UNII-

1 and UNII-3 bands and choice one legal channel randomly. And it acting as a client operate in UNII-

1,UNII-2A,UNII-2C and UNII-3 bands, and this is not user configurable. 3. For a device that can be configured as a master and client (with active or passive scanning), if this is user configurable, describe what controls exist, within the UI, to ensure compliance for each mode. If the device acts as a master in some bands and client in others, how is this configured to ensure compliance?

Best Regards Name: Jim Xu Title: Engineer Company: GD Midea Air-Conditioning Equipment Co.,Ltd Address: Lingang, Beijiao ,Shunde FOSHAN CHINA E-mail:

Jimxu2@midea.com 5G Wi-Fi Declaration Letter

GD Midea Air-Conditiong Equipment Co., Ltd Date (10/04/2020) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: 2ADQO3SB3350N3 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules, GD Midea Air-Conditioning Equipment Co., Ltd. hereby requests permanent confidential treatment of information accompanying this application as outlined below:

[Common exhibits for which confidentiality is requested are:

Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation]

GD Midea Air-ConditioningEquipment Co., Ltd.also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of 180 days:

[Common exhibits for which short-term confidentiality is requested are:

Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer:

Telephone Number:

Email:

Jimxu2@midea.com

Example of Modular Approval request letter (for TCB TCB approval):

GD Midea Air-Conditiong Equipment Co., Ltd Date (12/06/2020) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir/Madam, RE: Modular Approval Request for Model:

FCC ID: 2ADQO3SB3350N3 The following attestation addresses the requirements to support modular approval:

Modular approval requirement Yes No *

(a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly

(b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal

(c) The module must contain power supply regulation on the module

(d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)

(e) The module must demonstrate compliance in a stand-alone configuration

(f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements)

(g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements

(h) The module must comply with RF exposure requirements

* Please provide a detailed explanation if the answer is No. Yours sincerely, Name: Jim Xu Title: Engineer Yes Yes Yes Yes Yes Yes Yes Yes