Power Button Pair Button Press to pair. Power Indicator Pair Indicator Power Indicator When connected to a PC Status Charging Fully Charged Indicator No light Red light Green light
(when powered on) Status When not connected to a PC Indicator No light Green light Power On Low Power Micro USB Charging Port Line Out Pair Indicator Status Searching Pairing Mode Paired Indicator Solid light Charging 1. Connect the included Micro USB to USB charging cable to the Micro USB Charging Port port on the unit and the USB port on a computer. or other charging device. The device will now charge. Note: Initial charging time 2.5 hours. Please charge fully before use. Connecting 1. Connect the included 3.5 mm cable to the Line Out port on the unit and the Line In port on your device. 2. Press the Power Button to power the unit on. Note: Make sure the unit is fully charged before use. Pairing 1. Press the Power Button. 2. 3. The Pair Indicator when searching, then quickly to enter pairing mode. If this does not occur, press the Pair button. Using the native controls on your Bluetooth device, select the IAB13 to pair. If your device requests a password, enter the default password 0 0 0 0 . Refer to the users manual for your and connecting Bluetooth devices. Press the Power Button to turn 4. Company Information International Support To download this Users Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at www.iLiveElectronics.com. Para descargar este Manual del Usuario en ingls, espaol y francs, o para obtener respu-
estas a preguntas frecuentes, visite la seccin de apoyo en www.iLiveElectronics.com. Pour tlcharger ce guide de lutilisateur en anglais, espagnol ou franais, ou pour obtenir des rponses des questions frquemment poses, consultez la rubrique dassistance sur www.iLiveElectronics.com. Copyright 2013 Digital Products International (DPI, Inc.) |
All other trademarks appearing herein are the property of their notice The Bluetooth word mark and logos are owned by the Bluetooth SIG Contact Information Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Website: www.iLiveElectronics.com Warranty For Warranty Information and the most up-to-
date version of this Users Guide, go to www.iLiveElectronics.com. Warnings WARNING party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. USERS GUIDE V:796-01 IAB13B Bluetooth Receiver and Adapter For this Users Guide, go to www.iLiveElectronics.com