GIPS Technology Co., LTD. GA-210 Reference Guide GIPS Technology Co., Ltd GIPS Technology Co., LTD. Content 1 Introduction .............................................................................................................. 3 1.1 Main Features ................................................................................................................ 3 1.2 Description..................................................................................................................... 3 1.3 Product outline............................................................................................................... 4 Product Pictures .................................................................................................................... 4 Product Dimension ................................................................................................................ 5 Product I/O............................................................................................................................. 5 2 Product Specification ................................................................................................ 6 GIPS Technology Co., LTD. 1 INTRODUCTION 1.1 Main Features Meet IEEE 802.15.4a UWB Meet IEEE 802.11 b/g/n Support power-over-ethernet 802.3af 10/100M Ethernet BLE 4.2 ToF/TDoA Mode Supported 1.2 Description GA-210 is the UWB anchor used in GIPS Real Time Location System (RTLS) solution, supports the TOF / TDOA positioning algorithm. GIPS RTLS solution can be applied in hospital, factory, warehouse and other fields. The typical deployment structure is shown as below figure, GA-210 receives the signal from the UWB tags in the field side, and upload the packet data to the server side. GA-210 could be configured by the software on the server side, also transit the command from the server to the tags. GA-210 supports standard IEEE802.3af PoE power supply, can be managed by PoE switch, also can powered by DC power supply. The power supply voltage is DC 5V. GA-210 supports WiFi 2.4Ghz, the data can be transferred through the wireless connection. It facilitates the deployment of the anchors in some environments. GIPS Technology Co., LTD. 1.3 Product outline Product Pictures
- 4 -
GIPS Technology Co., LTD. Product Dimension Product I/O ARJ45, PoE supported BReset button CDC-5V Input
- 5 -
GIPS Technology Co., LTD. 2 PRODUCT SPECIFICATION Standard External I/O General IEEE802.15.4a IEEE802.11 b/g/n IEEE802.3af BLE 4.2 DC power jack RJ45 connector Reset button Dimension (mm) 128 x 134 x 37 Weight (g) 250 Power Requirement
+5V DC-in / Powered LAN(POE) Power Dissipation
< 1.6W Indicator Light Temperature Humidity PWR: Green, Bright after power on UWB: Green, Flicker during positioning interaction LAN: Green, Flicker in wired data transmission Wi-Fi: Green, Flicker in Wi-Fi data transmission BLE: Blue, Bright after power on Operating: -20C~65C Storage: -40C~85C Operating: 0%~90% without condensation Storage: 0%~90% without condensation UWB Working Frequency 3.25GHz~6.75GHz Physical Rate 110 Kbps / 850 Kbps / 6.8 Mbps (Adjustable) Output power (25C)
-41.3dBm/MHz ~ -24dBm/MHz (Adjustable) Channel Bandwidth 500 MHz Antenna Specification Built-in flex antenna, peak gain 5dbi (average) Working Mode ToF / TDoA Time SYNC Wireless SYNC
- 6 -
GIPS Technology Co., LTD. Wifi Protocols IEEE 802.11 b/g/n (802.11n up to 150 Mbps) Frequency Range 2.3GHz ~ 2.5GHz Antenna Specification Built-in flex antenna, peak gain 3.2dbi (typical) Modulation technique 11b/11g/11n Output power (25C) Up to +21 dbm Receiving sensitivity
-98 dbm Channel Bandwidth 20Mz/40MHz Networking Mode Bridge WLAN Mode AP STATION AP + STATION Networking Protocol P2P , TCP/IP , UDP , DHCP Wi-Fi Encryption AES 64/128/256 Authentication WEP / WPA-PSK / WPA2-PSK / WPS3-PSK BLE Protocols Bluetooth v4.2 BR/EDR and BLE specification Radio NZIF receiver with 97 dBm sensitivity Class-1, class-2 and class-3 transmitter AFH Antenna Specification Built-in flex antenna, peak gain 3.2dbi (typical) Output power (25C)
+10 dbm Receiving sensitivity
-98 dbm Others Configuration Tools GIPS_Anchor_Monitor_v1.0.0 (Windows Application) GIPS_BLE_Monitor_v1.0.0(Android APP)
- 7 -
GIPS Technology Co., LTD. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. UWB systems operating under the provisions of this section shall bear the following or similar statement in a conspicuous location on the device or in the instruction manual supplied with the device: This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.
- 8 -
GIPS Technology Co., LTD. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- 9 -