FCC ID: 2AJ53-00100 BEAM

Beam Overview Getting Started Charging Light Shows battery level while charging Wi-Fi Light When this light stops flashing you can connect your device Power Button Power On: Press and hold for 3 seconds until Power Light turns on Power Off: Press and hold for 3 seconds until Power Light turns off Battery Level:

Quickly press power button to view battery level GoChip Channel GoChips magnetically snap in place Power Light On/Off and battery level indicator Charging Port Use the included cable to charge your Beam Password Label Shows the Wi-Fi Network name

(GoChip...) and a password for connecting to the Beam from your mobile device Reset Button Reset to factory settings with end of paper clip. See gochip.com for details Download app Visit gochip.com/apps on your phone, tablet or PC to download the GoChip Player app, then create an account and log in. Power on Beam Press and hold the power button for 3 seconds until the right light turns on. You can connect when the Wi-Fi light stops flashing. Connect your device On your mobile device, open Settings > Wi-Fi to connect to the GoChip Beam

(see label on your Beam for network name and password), then wait for an indication that your device is connected. Please note: when you connect to your Beam, your device may let you know that you are no longer connected to the Internet. This is expected behavior because you are now connected to the Beam and not to the Internetgiving you access to all your movies & TV shows without Internet access or downloading. Note: this message is normal since you are now connected to the Beam, not the Internet. Just Play!

Start the GoChip Player App and enjoy your movies and TV shows. You can connect up to 8 devices at the same: each person playing what they want, when they want. You provide the popcorn, we provide the fun. Power off Beam Press and hold the power button 3 seconds until the power light turns off. Need help or want to learn more?

Visit gochip.com/beam Battery level colors

>90% charge 1090% charge

<10% charge For more information visit gochip.com FCC and IC Notice appareils radio exempts de licence. Lexploitation est autorise aux deux condi-

tions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouil-

lage est susceptible den compromettre le fonctionnement. SAR FCC RF Radiation Exposure Statement:

Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the mea-

surement methods and procedures specified in OET Bulletin 65 Supplement C. SAR IC RF Radiation Exposure Statement:

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration dexposition aux radiations:Le produit est conforme aux limites dex-

position pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si lappareil peut tre conserv aussi loin que possible du corps de lutilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. Canada, Industry Canada (IC) Notices This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

(IC French Notices ) Canada, avis dIndustry Canada (IC) Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux

FCC ID: 2AJ53-00100 IC: 22085-00100 APPENDIX 3 PHOTOGRAPHS OF EUT International Standards Laboratory Report Number: ISL-16LR263FCDTS EUT 1 FCC ID: 2AJ53-00100 IC: 22085-00100 EUT 2 International Standards Laboratory Report Number: ISL-16LR263FCDTS EUT 3 EUT 4 FCC ID: 2AJ53-00100 IC: 22085-00100 WIFI Antenna International Standards Laboratory Report Number: ISL-16LR263FCDTS

FCC ID: 2AJ53-00100 IC: 22085-00100 APPENDIX 2 PHOTOGRAPHS OF EUT International Standards Laboratory Report Number: ISL-16LR263FCDTS EUT 1 FCC ID: 2AJ53-00100 IC: 22085-00100 Memory Stick

(Non- RF inside) EUT 2 International Standards Laboratory Report Number: ISL-16LR263FCDTS EUT 3 FCC ID: 2AJ53-00100 IC: 22085-00100 EUT 4 International Standards Laboratory Report Number: ISL-16LR263FCDTS EUT 5 FCC ID: 2AJ53-00100 IC: 22085-00100 EUT 6 International Standards Laboratory Report Number: ISL-16LR263FCDTS EUT 7 FCC ID: 2AJ53-00100 IC: 22085-00100 EUT 8 International Standards Laboratory Report Number: ISL-16LR263FCDTS

FCC ID & IC LABEL FORMAT AND LOCATION Applicant: GOCHIP INC. FCC ID: 2AJ53-00100 IC ID: 22085-00100

Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (current) Revision History From 1.0 1.0 2.0 3.0 4.0 To 1.0 2.0 3.0 4.0 5.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 GoChip Inc. 2017/03/03 To: SIEMIC, Inc. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ufro corp hereby authorize SIEMIC, Inc. to act as Certification Body for certifying for the following project(s):

Product description: BEAM Model name: A1947 FCC ID: 2AJ53-00100 Sincerely, Clients signature:

Clients name & title: Carl Segal, Vice President, Operations Contact information / address: 275 Airpark Blvd Suite 100, Chico, CA 95973-9522 United States SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0

GoChip Inc. Date: May. 22, 2017 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AJ53-00100 To Whom It May Concern:

This letter is to ascertain that GoChip Inc. Product BEAM, has been the units used for conducting FCC compliance testing, the DoC part will be tested by International Standards Laboratory / No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan If you have any question or concerns, pls. contact us. Sincerely, Name / Title : Carl Segal / Vice President, Operations Address: 275 Airpark Blvd Suite 100, Chico, CA 95973-9522 United States Phone No./ Email: 530-591-5991 / Carl@GoChip.com

WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Initial Release (obsolete) Modify the select options (current) Revision History From Initial 1.0 To 1.0 2.0 Approved Date December 22, 2015 September 23, 2016 SCSF190WiFiChannel12&13DeclarationLetter CreatedbyWilliamGraff Page1of2 Rev.2.0 ApprovedbyBaoThuongNguyen GoChip Inc. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID:2AJ5300100 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Carl Segal, Vice President, Operations Signature:

Phone: 530-591-5991 Email: Carl@GoChip.com Date:2017/03/03 SCSF190WiFiChannel12&13DeclarationLetter CreatedbyWilliamGraff Page2of2 Rev.2.0 ApprovedbyBaoThuongNguyen

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box

(obsolete) Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(current) Revision History From 1.0 1.0 2.0 3.0 4.0 To 1.0 2.0 3.0 4.0 5.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov 19 2015 SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 5.0 GoChip Inc. 2017/03/03 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AJ53-00100 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

- Block Diagram

- Schematics

- Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature:

Clients name & title: Carl Segal, Vice President, Operations Contact information / address: 275 Airpark Blvd Suite 100, Chico, CA 95973-9522 United States SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 5.0

GoChip Inc. May. 22, 2017 FCC ID : 2AJ53-00100 IC: 22085-00100 Dear Sir, 1 hereby have entrusted the following person to be a proxy regarding application for FCC Certification. GoChip Inc. Address: 275 Airpark Blvd Suite 100, Chico, CA 95973-9522 United States Name: Carl Segal Job Title: Vice President, Operations Email: Carl@GoChip.com Iam therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: GOCHIP / A1947 FCC ID: 2AJ53-00100 / IC: 22085-00100 Product Name: BEAM Signature FCC grantee contact person information. Name/Title: John Strisower, CEO Company Name: GoChip Inc. Address: 275 Airpark Blvd Suite 100, Chico, CA 95973-9522 United States TEL: 530-591-5991 Email: John@GoChip.com