WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6388354.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com For Certification, Warranty and RMA information, please visit: www.grandstream.com GWN7700P & GWN7701P 5&8-port Unmanaged Gigabit Switch Quick Installation Guide Content English.......................................................1 CONNECTION Note: For simplicity, we will take GWN7700P for example throughout the Guide. Power Adapter 5 3 . 5 V Grounding Terminal Notes:
Compliance with the 802.3af/at PoE+ standard, Ports
(1,2,3,4) support up to 30W on each PoE port, total 60W Power Budget. When total power consumption exceeds 60W, the intelligent power management will cut the lower priority port power, the priority is from Port 4 to Port 1. Kensington Lock Back Front LED Indicator Power Link/
Activity ON OFF ON OFF Power ON Power OFF Link present but not activity No link Ethernet Ports Router LAN Port WAN Port Flashing Transmitting/receiving data The Operation Environment And Peripheral Operation Temperature: 0 to 40 C (32 to 104 F) Storage Temperature: -40 to 70 C (-40 to 158 F) Operating Humidity: 10% to 90% Non-condensing Storage Humidity: 5% to 90% Non-condending Adapter: Output: +53.5VDC, 1.22A, 65W, UL certified Ethernet port: 10/100/1000Mbps RJ-45 port Power Jack: 53.5V DC power port; UL Certified AP Access Point IP Phone Internet Refer to online documents and FAQ for more detailed information: https://www.grandstream.com/our-products
~1~
~2~
If trouble is experienced with this equipment, please contact (Agent in the US):
Company Name: Grandstream Networks, Inc. Address: 126 Brookline Ave, 3rd Floor Boston, MA 02215, USA Tel: 1-617-5669300 Fax: 1-617-2491987 U.S. FCC Part 15 Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-003(B) / NMB-003(B)